Triggering an event when writing to Database

Hi,
Does anyone knows a way to trigger some kind of event (some program / function)
when a specific standard table changes?
Thanks,
Doron Oded.

My friends,
I'm affraid this is not quite answering my question.. appearantly..
Because this is not a general enough solution, I've checked for example if tables EBAN, and MSEG are logging-enbaled in standard, and I was very dissapointed to see that they are not..
If I need an access key to change these kind of most basic logistics tables, this is the wrong solution.
So, I hope you won't be upset with me if I'll take our wonderfull discussion a bit back, and ask again,
is there a simple way to trigger some program when tables change?
The change could be from any program - SM30, or MIGO, or ME52n... Hence, it (the way) should not be based on the updating program (via UE), It should not require access keys for changing standard table settings..
Thanks again, and I appologize for my stubbornness,
Doron.
P.S: Have a lovely weekend.

Similar Messages

Triggering an event when the new AIR application installation has done for first time in machine

I am installing AIR application from web page by using a badge.Is it possible to call a function once the installation of AIR app was finished[once we click finish button in the installer] to update the AIR application version dynamically inside our code.If so please share. Any suggestion would be appreciated.

Hi Rizwana,
So as you said that you had created a event linkage between change document object and Business object you can now switch on the event trace SWELS and go to the particular transaction by which the event of this Business Object gets triggered ( the event you mentioned in SWEC). Switch of the event trace (SWELS) and check the Business object that had triggered in SWEL transaction.
Hope this would help you.
Any clarification.. then please revert back.
Good luck
Narin

RAISING AN EVENT WHEN DATABASE TABLE UPDATES

hi all,
i want to raise an event when database table updates.For eg : if a price of a material has been changed then i have to raise an event and run the abap program in back ground.i know transaction SM62 to create event, i dont know about transaction SM64. please give me the procedure how to solve this problem. i dont know work flow. please give me a sample code how to raise event.
thanka and regards
suresh

Hi Suresh
It is important to understand that the SAP architecture abstracts the database from the application.
I think that you should look for ways that the application triggers an event when an update has taken place, rather than the DB.
Two ways of doing this that spring to mind are change pointers (for the ALE interface, see menu SALE) and Business Transaction Events (various things including CRM integration, see menu FIBF).
The latter works very well for sending prices to CRM when they change. I am more familiar with this than ALE so I will discuss it.
If you go to menu FIBF and then follow menu path Environment -> Info System (P/S), and then run the report for event 00503301, you can find documentation and a sample function module that you can copy.
Once you register your new function module in the event tables then it will be called when prices are changed.
Cheers
Dom

Workflow not triggered for BP when start condition's field is set by BADI

Hi guys,
I have created a workflow and given the start Event "Changed" of object BUS1006. In this I have given a start condition which triggers this event when a particular field on transaction BP is populated.
Now the problem is that when I myself explicitly populate the field and press save the workflow is triggered fine, but when I populate that field automatically in a Save BADI (BUPA_GENERAL_UPDATE), the workflow is not triggered. Tcode swel just returns the msg that Start condition returns 'FALSE' for object.
Can someone please help me in this or let me know where I can find its cause in system.
Any help would be really appreciated.
Regards,
Shaili

If this is just one field, create your own custom event and code launching it when saving BP with your field changed.
Maybe event Changed is executed only for changes in GUI.
If you program your own one you will have 100% control of it.
Regards
Radek

Triggering event when entries inserted in standard table

Hi Experts,
I've a requirement to trigger an custom event when entries created in table TOA01 table. We can do this for Z-tables by through options available in table maintenance generator screen. But, in my case its standard table, so i cant change the table. And I dont want to use change document objects. Can you please let me know is there any other method to achieve this.
Thanks in Advance,
Siva Sankar.

Have you checked that if there is a standard event triggered when an entry is done to this table? I think that there might be. If an event is triggered, you can for example create a check function module, and trigger your own event from there.
Regards,
Karri

DPM couldn't find valid recovery points for VM listed as having numerous recovery points when writing to tape

I'm seeing the following events when DPM tries writing to tape:
Log Name:      DPM Alerts
Source:        DPM-EM
Date:          15/02/2014 12:01:07
Event ID:      3311
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      <backup server FQDN>
Description:
The back up to tape job failed for the following reason: (ID: 3311)
Backup of Non VSS Datasource Writer on <PROD server FQDN> cannot be completed. DPM could not find a valid recovery point on disk. (ID: 30126)
All VMs on each of the affected servers have recovery points but
When performing disk to disk to tape backups (d2D2T), tape backups will fail if a new disk based backup is not created before the next scheduled tape backup. DPM always makes tape backups by mounting last successful disk based recovery point.
This is so we don't need to transfer data over the network since that most recent data is already on the DPM server. Look to see why the disk recovery points are failing and correct that to prevent tape backups from failing.
http://social.technet.microsoft.com/Forums/en-US/a9b80780-2a5c-43bc-8111-ee35db56f359/backup-tapes-dpm-2012?forum=dpmtapebackuprecovery
Is this the only time that recovery points are verified? Can I do a manual verification of recovery points? I'm concerned that some of the backups I have may be corrupt. If that's the case I need a way of finding out which ones are affected and a way to
resolve the issue. Unfortunately I've not found much,the DPM error code isn't even listed in the official documentation. http://technet.microsoft.com/en-us/library/hh859159.aspx Other threads where people have seen this issue seem to be for older versions
of DPM (I'm using the latest 2012 R2 fully updated).

Hi,
I've been having some difficulty running the Powershell command, see below. I've been using this for guidance http://technet.microsoft.com/en-us/library/hh881586%28v=sc.20%29.aspx where am I going wrong here?
$Pg = Get-DPMProtectionGroup
-DPMServerName <dpm server name here>
$Ds = Get-DPMDatasource
-ProtectionGroup $Pg[1]
New-DPMRecoveryPoint
-Datasource $Ds
-Disk -DiskRecoveryPointOption -WithDataIntegrityCheck
PS C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\bin> New-DPMRecovery
Point -Datasource $Ds -Disk -DiskRecoveryPointOption -WithDataIntegrityCheck
New-DPMRecoveryPoint : Missing an argument for parameter
'DiskRecoveryPointOption'. Specify a parameter of type 'Microsoft.Internal.Ente
rpriseStorage.Dls.EngineUICommon.EngineConstants.DbEnums+CreateDiskRecoveryPoin
tOption' and try again.
At line:1 char:44
+ New-DPMRecoveryPoint -Datasource $Ds -Disk -DiskRecoveryPointOption
-WithDataInt ...
+
~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo
: InvalidArgument: (:) [New-DPMRecoveryPoint], Par
   ameterBindingException
    + FullyQualifiedErrorId : MissingArgument,Microsoft.Internal.EnterpriseSto
   rage.Dls.UI.Cmdlet.ProtectionCmdLets.CreateRecoveryPoint
PS C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\bin>

Trap event when Application server is shutdown

Hi All,
Actually I want to catch an event do something when weblogic server is shutdown.
How can I catch the event.
Any help would be highly appreciated.
I tried by implementing ServletContextListener interface, but in that I can only catch the event when weblogic is started, but not when it is shutdown.

Why not? ServletContextListener.contextDestroyed() will always be triggered when the container is shutting down.

Error when writing to the Internal Buffer-runtime error during querydisplay

Hi
I am working in BW 3.5. I am trying to run a query in BEx Analyzer but I am getting the following Error
Error when writing in the Internal Buffer see OSS note 156957
I tried for the note but I am not getting relevant information.
Please let me know what to do.
Thanks,
Padma

Hi,
please apply the note 1614788. After note implementation, you need to set parameter RSR_HIER_THRESHOLD_EXPORTDB in table RSADMIN via report SAP_RSADMIN_MAINTAIN in transaction SE38.
If you set this parameter to value 50.000 for example, all hierarchies with more than 50.000 nodes will be buffered in the database instead of using the export/import buffer.
To find out the current size of a hierarchy, goto the hierarchy maintenance in transaction RSH1 and copy the hierarchie ID from the header data. With this key you can goto transaction SE16 and select table RSRHIEDIR_OLAP (Field HIEID is the hierarchy ID).
It should resolved your issue.
Thanks,
Venkat

How create mail alert without triggering the event.

1. SR 3-4924626351: How create mail alert without triggering the event.
We wanted to send alert mail every 10 days or 15 days or 1 month to a reporting manager of Opportunity Owner with details of that Opportunity. I don’t want to use any triggering of event like the Following. When new opportunity is created When modified Opportunity is saved etc.

Raju,
If you don't want to use the triggering event, you will have to do this manually.
Manually:
- Create a Web Link on the SR with and embed the mailto: function with the receivers email and subject and body embedded in the url (you can find this link on Google)
- When this link is clicked, an email window will open with all the details you provide, and you can click the send button to send the email.
- You will have to do this manually every 10-15 days or whatever is the duration
Auto:
- Create a time based workflow on a new Opportunity Created event
- create a action to send an email notification to the concerned person (details in the workflow properties)
- This workflow will auto send an email every 10-15 days to the opportunity Manager.
The time based workflow is the best option I see. Do you see any issue/ concerns with auto generated emails?
Hope this helps!
Royston

I/O Error when writing access Log buffer to file. error number: 28

Hi,
Oracle OracleAS Web Cache 10.1.2.3.0, Build 10.1.2.3.0 080201 is writing events like this:
[alert 13215] I/O Error when writing access Log buffer to file. error number: 28
I've looked for this alert and i've found this description:
WXE-13215 I/O Error when writing access Log buffer to file. error number: %d
Severity: alert
Cause: I/O error happened when OracleAS Web Cache tried to write to the access log file.
Action: Check the status of access log file. For example, see if the disk is full
Anybody knows what "error number: 28" stands for? The logs are sended to other server and it seems that the disk size is ok.
thanks!

I tested again...it seems LabVIEW doesn't like the way I wrote the measurement files. I attached a set of VIs (ZIP-file) to give you a clue how it was done. When I try to save and read a file containing just plain DBLs from a 1D-Array (see attached file generating VI) it works perfectly well for large file sizes.
So there might get something messed up by the way LabVIEW saved the measured data. You'll notice, that I (accidentally) left the "prepend array string size" input of "write to binary file" function unwired which means that the size information will be written as a type of header. Maybe this is the reason that it doesn't work as expected...
Attachments:
VibrationMeasurement.zip ‏76 KB
generate_test_bin_data.vi ‏12 KB

[Solved] systemd - To fork or not to fork when writing services

Hello,
Many of the programs i write services for have the option to fork or not to fork. Or are
advertised as daemons but have the ability to not fork into the background.
I don't understand which i should choose when writing a new service unit.
When do you want a program to run in 'daemon-mode' and when don't you?
Do i lose/gain anything when i make such a choice?
Thank you.
Last edited by captaincurrie (2015-01-01 12:32:11)

falconindy wrote:
anatolik wrote:
[If you have a choice then use Type=simple for your systemd services. It is simpler and systemd will take care or proper process deamonizing, restarts and shutdowns.
Type=forking is for historical services that cannot be run in foreground. In this case process itself will take care of its deamonizing, but systemd should know the child pid somehow so you need to provide PIDFile= option as well.
Historical or not, Type=forking is necessary if you need to be able to order other services on the Type=forking service. Type determines the readiness protocol used by systemd. In the case of Type=simple, there is no protocol. systemd assumes that as soon as the binary is exec'd, the service is available. For Type=forking, services are considered ready after the MainPID exits (after the double fork), allowing for time to setup sockets or other resources needed to handle client requests (e.g. a database server or a web server). If you use the Type, you may find that dependent services fail to startup properly, as their dependencies aren't actually ready when systemd declares them to be.
Thank you, that really cleared it up for me
After your response, and re-reading the manual, it all makes sense now!

BP_CONFIRM does not triggers the event properly from call list

Hi expert,
We have upgrading CRM 5 to 7.
The issue is. In the IC_AGENT role. When i got to call list and select a call. The corresponding bp is automatically conformed.
But then when i go to Account identification navigation link i can only see the bp confirmed. the vehicle info of the BP are not displayed the view remains the same. normally it displays the vehicle details in the result view.
If i directly search for a BP and conform it all the vehicle detail are displayed in the result views.
It happens only when a BP is automatically conformed by selecting from the call list.
But in both the cases the Method "CL_CRMCMP_B_CUCOBUPA_IMPL->BP_CONFIRM" is triggered ( it is a customer control in CRMCMP_BPIDENT/CuCoBuPa )
the difference i can find is.
if i conform a bp manually from the account identification screen. the CL_ICCMP_AU_VEHISEARCH_IMPL->IF_CRM_IC_EVENT_LISTENER~HANDLE_EVENT is triggered. ( which is inside the "ICCMP_AUTO_VEHI/VEHISearch" ) which displays the required view.
but when the same BP_CONFIRM is triggered automatically from the call list management view it is not triggering CL_ICCMP_AU_VEHISEARCH_IMPL->IF_CRM_IC_EVENT_LISTENER~HANDLE_EVENT. ( which is inside the "ICCMP_AUTO_VEHI/VEHISearch" ).
so i can see the difference in the event listeners of the 2 process.
below is the piece of code which triggers the event. it is in the method "CL_CRMCMP_B_CUCOBUPA_IMPL->BP_CONFIRM" d ( it is a customer control in CRMCMP_BPIDENT/CuCoBuPa )
raise event BPConfirmed and/or CPConfirmed
    IF lv_bp_confirm EQ abap_true.
      CLASS cl_crm_ic_services DEFINITION LOAD.
      CREATE OBJECT event.
      event->set_name( if_crm_ic_events_con=>gc_bpconfirmed ).
      event_srv = cl_crm_ic_services=>get_event_srv_instance( ).
      event_srv->raise( event ).
    ENDIF.
Can any one help me how to register the event or trigger the CL_ICCMP_AU_VEHISEARCH_IMPL->IF_CRM_IC_EVENT_LISTENER~HANDLE_EVENT is triggered. ( which is inside the "ICCMP_AUTO_VEHI/VEHISearch" )
when i click on call list.
thanks in advance
chella.

Hi expert,
We have upgrading CRM 5 to 7.
The issue is. In the IC_AGENT role. When i got to call list and select a call. The corresponding bp is automatically conformed.
But then when i go to Account identification navigation link i can only see the bp confirmed. the vehicle info of the BP are not displayed the view remains the same. normally it displays the vehicle details in the result view.
If i directly search for a BP and conform it all the vehicle detail are displayed in the result views.
It happens only when a BP is automatically conformed by selecting from the call list.
But in both the cases the Method "CL_CRMCMP_B_CUCOBUPA_IMPL->BP_CONFIRM" is triggered ( it is a customer control in CRMCMP_BPIDENT/CuCoBuPa )
the difference i can find is.
if i conform a bp manually from the account identification screen. the CL_ICCMP_AU_VEHISEARCH_IMPL->IF_CRM_IC_EVENT_LISTENER~HANDLE_EVENT is triggered. ( which is inside the "ICCMP_AUTO_VEHI/VEHISearch" ) which displays the required view.
but when the same BP_CONFIRM is triggered automatically from the call list management view it is not triggering CL_ICCMP_AU_VEHISEARCH_IMPL->IF_CRM_IC_EVENT_LISTENER~HANDLE_EVENT. ( which is inside the "ICCMP_AUTO_VEHI/VEHISearch" ).
so i can see the difference in the event listeners of the 2 process.
below is the piece of code which triggers the event. it is in the method "CL_CRMCMP_B_CUCOBUPA_IMPL->BP_CONFIRM" d ( it is a customer control in CRMCMP_BPIDENT/CuCoBuPa )
raise event BPConfirmed and/or CPConfirmed
    IF lv_bp_confirm EQ abap_true.
      CLASS cl_crm_ic_services DEFINITION LOAD.
      CREATE OBJECT event.
      event->set_name( if_crm_ic_events_con=>gc_bpconfirmed ).
      event_srv = cl_crm_ic_services=>get_event_srv_instance( ).
      event_srv->raise( event ).
    ENDIF.
Can any one help me how to register the event or trigger the CL_ICCMP_AU_VEHISEARCH_IMPL->IF_CRM_IC_EVENT_LISTENER~HANDLE_EVENT is triggered. ( which is inside the "ICCMP_AUTO_VEHI/VEHISearch" )
when i click on call list.
thanks in advance
chella.

Ü Character being replaced ? when writing the data to CSV from DB in Linux

Hi All,
Can anyone help me in understanding the exact cause of my issue
Issue Description: Ü Character being replaced ? or when writing the data to CSV from DB in Linux.
Shell used: ksh
Actual string: MÜNCHENER RÜCKVERSICHERUNGS-GESELLSCHAFT AG
Output String: M?NCHENER R?CKVERSICHERUNGS-GESELLSCHAFT AG
locale ouput:
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
Environment variable set: NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
Linux Version: 2.6.18-128.el5 128 bit
java Version: 1.6
Oracle DB version: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
When i query directly from DB i get the data in right format but when i write the same data to a csv file then the above problem occurs.
Can anyone please suggest me what could be the cause for this issue?
Regards,
Shiva

Hi Srini,
We are using Java based ETL specifically written for our application. we are using sqlplus to make DB connections. am using vi editor to see the data. After the Extraction process the data processed in also in the wrong format.
Regards,
Shiva

How to handle event when the user closing the browser (Urgent Please)

Hi,
How to handle the event when user closes the browser....
i want to display some alter message when user trying to close the browser...
Please can any one help me how i have to do this...........
Thanks.

Finally got this working. You cannot use the stop() or destroy methods. By the time they are called all database connections are gone and you will get a null pointer exception.
You will have to use the onBeforeUnload method in the html file that calls the applet and use JavaScript to call the save method in java which saves the document:
<SCRIPT LANGUAGE="JScript" TYPE="text/javascript">
function Save()
//i call the applets doSave() method from here in which i save all
//changes to the database
top.Tree.document.TestApplet.doSave();
//this will invoke the default IE message for closing the window
//when user clicks on the x in the browser
message = "Your document has been saved."
return message;
window.onbeforeunload=Save;
</SCRIPT>
//the applets doSave()
public void doSave()
//this frame provides user with the message that document is being
//saved
final JFrame frame = new JFrame("Saving");
JPanel contentPane = new JPanel();
JLabel label = new JLabel(" Please wait, saving document...");
frame.getContentPane().add(label,BorderLayout.CENTER);
frame.setSize(250, 100);
frame.setLocation(300, 400);
frame.setResizable(false);
frame.setVisible(true);
frame.addWindowListener(new WindowAdapter()
//the frame is just for user's information, so prevent user from
//closing it or iconifying it.
public void windowClosing(WindowEvent e)
frame.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
public void windowIconified(WindowEvent e)
frame.setState(frame.NORMAL);
//call my saveDocument() method that saves everything to the database.
editorModule.saveDocument();
//System.out.println("finished calling saving document");
//once the saving is done the frame with the message disappears
frame.setVisible(false);
//System.out.println("setting frame to false");
//I also had an exit button in my applet, that would perform the same task, however now with the above onBeforeUnload method, the exit message would appear twice, so had to modify my exit button action performed, so that if the exitbutton was clicked the onbeforeunload method would get passed a null value and not do anything.
private void exitButton_actionPerformed()
if (DEBUG) System.out.println("Calling exit");
doSave();
window.eval("this.onbeforeunload=null;");
window.eval("top.close();");
//continue from here if user cancels the closing of the window
window.eval("this.onbeforeunload=doSave;");
window.eval("top.focus()");
window.eval("document.TestApplet.requestFocus()");
homePanel.requestFocus();
}

Trigger event when items moved from a library to a document

Hi all,
I want to be able to trigger an event when a user drags items from a library in to their document, I had looked at the AfterMove event which I though might enable me to access any items after they had been moved (worst case scenario) but I can't seem to get this event to trigger.
Any thoughts?
Cheers
JSX

You can't really single out the selectionChanged or place events triggered by dragging items from a library from other selectionChanged or place events. See this thread for a relevant discussion and a link to the very useful Event Watcher extension. (It looks like afterMove is only triggered by a couple of objects, not including page items.)
Jeff

Triggering an event when writing to Database

Similar Messages

Maybe you are looking for