Triggering of the User exit MWMTO012 (EXIT_SAPLL03A_012)

Hi,
Please let me know when the User exit MWMTO012 (EXIT_SAPLL03A_012) is going to trigger. This exit is used for Transfer Order split.
Thanks,
Ranjan

Hi,
Just test it :
SMOD -> Put a break-point in the ZX* prog and activate.
Then run a LT* txn and check .
( You can easily go back if it doesn't do the job ! )
Regards,
Erwan

Similar Messages

  • What is the user exit triggering at this time of saving delivery document

    Hi All,
    What is the user exit triggering at this time of saving delivery document
    regards
    Deekshitha.

    For the Delivery process following project are used, you can list out all exit
    V02V0001
    V02V0002
    V02V0003
    V02V0004
    V50PSTAT
    V50Q0001
    V50R0001
    V50R0002
    V50R0004
    V50S0001
    V53C0001
    V53C0002
    V53W0001
    VMDE0001
    VMDE0002
    VMDE0003
    VMDE0004

  • When the User exit EXIT_SAPLL03T_002 would be triggered?

    Hi All,
    When the User exit EXIT_SAPLL03T_002 would be triggered?
    As per my understanding which would be triggered while confirming the transferorder (LT12). but In which conditon it will be triggered?I am unable to find out. if any one find the solution please pass ur inputs ASAP.
    thanks in advance,
    chandran.

    Hi,
    WHen the "Update SAPML03T transfer orders"  is done..This user exit will be triggered..
    Since the user exit is in a update module..If you put break-point it will not stop...
    Enable the UPDATE DEBUGGING..It will process all the update modules..
    Check when the FM L_TA_QUITTIEREN is called....You can debug through your code..
    Thanks,
    Naren

  • How does the user exit of validation rules get triggered?

    SPRO
    FinancialAccounting> GL Accounting > Business Transaction > GL posting > Carry out doc settings > Validation in accounting docs
    Here you can specify rules and call user exits also.
    To add code into the user exit, we have to copy the standard program that contains this user exit and then create a z version?
    If so, where do you tell to branch into the custom z program and not the standard program?

    Go to transation GGB0(Change Validation), Go to Application Area/Time -> Financial Accounting -> Line Item. Create a validation what ever you want and add the steps/rules for that. You have a provision to give Rules/Exits(User Exit).

  • Need the user exit/BADI name for Reverese order MIGo- ME21N(changing item)

    Hi
    I have the below requirement.
    I am changing the item details in the transaction MIGO transaction,the value of MSEG entries
    are got changed.and also it should change in the Purchase order level also(in the table EKKO).
    Can anybody tell me the User Exit /BADI name which is triggered in the Reverse order
    i.e MIGO -> ME21N.So that i can implement my code in the reverse order in the User Exit/BADI.

    hi I did not find any paramater type EKPO in the Exporting or changing of any methods in the BADI's given by you...........

  • Need the user exit/BADI name to display the error msg in PO for net price

    Hi
    I have the below requirement.
    While creating the PO(Purchase Order) with reference to PR(Purchase Requisition),if the net price value
    is 0.01 USD then the system will display a pop up a error message that 'This is a free price for PR'.
    Can anybody suggest me the User Exit or BADI name so that I can implement my code.
    Thanks
    PILOT

    ME_CHECK_ALL_ITEMS
    ME_CCP_ACTIVE_CHECK
    MD_EXT_SUP
    ME_DEFINE_CALCTYPE
    MD_STOCK_TRANSFER
    ME_PROCESS_PO_CUST
    These are the BADIs gettting triggered while dragging the PR's to PO creation.
    You can check any of these as per your requirement.
    Check if the BADI 'ME_PROCESS_PO_CUST' is useful.

  • I want the user exits in sd,mm,fi modules

    i want the user exits in sd,mm,fi modules.
    i dont want navigation. i want user exit names and function modules name.
    include names. which include is related to particular user exit.
    i want the information of this.

    Hi
    User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
    The naming standard of function modules for functionmodule exits is:
    EXIT_<program name><3 digit suffix>
    The call to a functionmodule exit is implemented as:
    CALL CUSTOMER.-FUNCTION <3 digit suffix>
    To find a Exit.
    Goto Transaction -- Find The Package
    SMOD >f4>Use the Package here to Find the Exits In the Package.
    Else if you Want to search by Application Area wise ,
    There is one more tab to find the Exits in the Respective Application Area.
    Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
    Now Run ur Transaction to Check if it Triggers.
    Thats it..
    Suppose you need to find out all the user exits related to a tcode.
    1. Execute the Tcode.
    2. Open the SAP program.
    3. Get the Development Class.
    4. Execute Tcode SE84.
    5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
    6. Enter the Development class and execute.
    Check out this thread..
    The specified item was not found.
    1. Type the transaction : system->status-> <PROG. NAME>
    2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
    3. Open CMOD utilities->SAP enhancements
    EDIT->All selections
    4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
    5. The displayed list contains the enhancements names for the transaction You were looking for.
    6. Create a project in CMOD and the code in default include->activate.
    http://www.erpgenie.com/sap/abap/code/abap26.htm
    which gives the list of exits for a tcode
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.planetsap.com/userexit_main_page.htm
    User-Exits
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/ab038.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.sap-basis-abap.com/sapab013.htm
    http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
    These links will help you to learn more on user exits.
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.allsaplinks.com/user_exit.html
    www.sap-img.com/abap/what-is-user-exits.htm
    Also please check these threads for more details about user exits.
    Re: Screen exit
    user exit and customer exit
    user exit
    <b>
    1. Document on UserExits in FI/CO
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    2. Finding User Exits...
    http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
    3. List of all User Exits...
    http://www.planetsap.com/userexit_main_page.htm</b>
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • About the user exit of MM06

    Dear experts,
        Can you tell me the user exit of MM06?
    Best regards,
    Merry zhang

    hi,
    there is no user exits availble for this transactions..but badi's are availble.please find badi for your requirement..
    finding badi.
    go to se 24
    and give class CL_EXITHANDLER
    click diplay
    and goto method GET_INSTANCE and double click on this
    and put break point at call method cl_exithandler=>get_class_name_by_interface
    and in another session open MM06 transaction ,then it will go to debugger mode
    then keep on press F8 and observ on which badi it triggers MM06.
    based on your rerquirement.find apprpriate badi
    Thanks and regards
    Durga.K

  • Sales order forceful completion using the USER-EXIT

    Hi all,
    We have a requirement as follows: As soon as the sales order is created a smartform should get triggered. the configurations are done in nace. It is working fine. But in our case we dont enter the PO number in the sales order this will show an incompletion log throwing a warning message. So we need to do modification in the user exit MV45AFZZ for the forceful completion of the sales order
    This is to be done for the order type Zxxx. As i have not worked in the userexits before can anyone help me with the code.
    Thanks and Regards
    venu.mulaparthi

    Hi,
    Try this..
    Create a new incompletion procedure in SPRO without that PO number field..
    In the user exit USEREXIT_SAVE_DOCUMENT_PREPARE in the include MV45AFZZ..
    IF VBAK-AUART = 'Zxxx'.
    * Switch the incompletion procedure.
      TVAK-FEHGR = 'ZZ'.   " New incompletion procedure..
    * Then call the function module with the new incompletion procedure..
    * I believe the function module name RV_CHECK_DOCUMENT.
    * Or check RV*check*document in SE37..
    * This will make sure the sales order to recognize
    * the new incompletion procedure..
    ENDIF.
    Thanks
    Naren

  • How can I find the USer Exit...

    Hi,
    How can I find the USer Exit...
    I need to do changes for this User Exit :EXIT_SAPLKEII_002
    In which T-code I can open this Exit
    Ex: Go to some Transcation code and then give the name of the Exit ato access this Exit
    ...any sugesstions will be apprecaited!
    Thanks & Regards,
    Kittu

    Hi,
        the EXIT : EXIT_SAPLKEII_002 is the exit,in this SAPLKEII is the standard Program.Copy this program and go to transactio SE38 and press Enter and then go for the option Where used list and check the check box Transaction. It displays the possible Transactions that the Exit triggers
    Regards,
    Vijaya Lakshmi.T

  • Problem while calling the user exit

    Hi All,
    In one of the program one user exit is called. Before this user exit ther is one FM . If I copy the same function module with a new name Z* , this user exit is not getting triggered. The program is going till the point where CALL CUSTOMER-FUNCTION '001' IS written but after that it's not going inside the user exit. But if I put back the original FM , this suer exit is getting triggered and it's gong inside the exit. I've activated the Project for this user exit also. As per our requirement I've to copy the original FM into Z* FM.But my doubt is when I put back the original FM , this User Exit is getting triggered whereas when I copied this FM it's not working .
    Anybody could helpme out why it's happening ?
    Thanks
    Alok

    Srinivas,
    Yes it's related to the other post where I had to copy one standard Function Pool.While copying the function pool I copied the FMs also.This problem is coming out of one FM ,when I changed this to Z* at the place where it is called, the user exit which is written inside that FM is not getting triggered even though program is reaching till the point where this user exit is called .
    Any clue ?
    Thanks
    Alok

  • TCODE the user exit belongs

    Hi
       can any body tell me to which TCODE has the user exit USER_SAVE_DOCUMENT
    Thanks & Regards
    Chandu

    hi,
    above mentioned user exit is used in transaction VA01
    and is triggers after pressing save.
    Regards,
    Vijay

  • How to find out the user exit is implemented

    Hi All,
    Kindly let me know the process to be followed to find out the User exit is implemented in SAP system.
    I have seen many senriors suggestions for some treads to check if there is any Exit is implemented in the process when the system is behaving differently rather standard.
    Is it the only way with help of ABAP'er we can find out or the functional consultant also can find out through some procedure?
    I tied in google for this doubt, but i could not get the relavant answer.Pleaea execuse me if this already answered.
    Thanks,

    Hi Krishna/TW,
    Thank you for your immediate replies. Sorry i think i have not explained correctly my requirment.
    Let me explain my requirement once again.Let us say Comapny has implemented one Exit in the project, now i want to find out what exactly the Exit was implemented.
    Example: In STO process user is able to increase the  qty in delivery. As per the client requriement system should not allow.
    This is not possible in standard to control even after maintainig  check over delivery field in 0VLP.
    For this comapny has already implemented one enahnceament.
    User Exit : USER EXIT_READ_DOCUMENT
    Program: MV50AFZ1
    like this when any one joined in the project we do not know what are all the Exits are implemented in the SAP system where we are working.
    So if i want to find out if there is any Exit or enhancement implemented, what is the process to find out?
    I hope now  am clear with my requirement.
    Thanks in advance.

  • How to find out the user-exits?

    hi.
    how to find out the user-exits?
    regards
    eswar.

    Hi,
    *& Report  ZEXITFINDER
    *report  zexitfinder.
    *& Enter the transaction code that you want to search through in order
    *& to find which Standard SAP User Exits exists.
    *& Tables
    tables : tstc, "SAP Transaction Codes
    tadir, "Directory of Repository Objects
    modsapt, "SAP Enhancements - Short Texts
    modact, "Modifications
    trdir, "System table TRDIR
    tfdir, "Function Module
    enlfdir, "Additional Attributes for Function Modules
    tstct. "Transaction Code Texts
    *& Variables
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    *& Selection Screen Parameters
    selection-screen begin of block a01 with frame title text-001.
    selection-screen skip.
    parameters : p_tcode like tstc-tcode obligatory.
    selection-screen skip.
    selection-screen end of block a01.
    *& Start of main program
    start-of-selection.
    Validate Transaction Code
    select single * from tstc
    where tcode eq p_tcode.
    Find Repository Objects for transaction code
    if sy-subrc eq 0.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
    select single * from trdir
    where name = tstc-pgmna.
    if trdir-subc eq 'F'.
    select single * from tfdir
    where pname = tstc-pgmna.
    select single * from enlfdir
    where funcname = tfdir-funcname.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name = enlfdir-area.
    move : tadir-devclass to v_devclass.
    endif.
    endif.
    Find SAP Modifactions
    select * from tadir
    into table jtab
    where pgmid = 'R3TR'
    and object = 'SMOD'
    and devclass = v_devclass.
    select single * from tstct
    where sprsl eq sy-langu
    and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
    select single * from modsapt
    where sprsl = sy-langu and
    name = jtab-obj_name.
    format color col_normal intensified off.
    write:/1 sy-vline,
    2 jtab-obj_name hotspot on,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
    else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
    endif.
    else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
    endif.
    Take the user to SMOD for the Exit that was selected.
    at line-selection.
    get cursor field field1.
    check field1(4) eq 'JTAB'.
    set parameter id 'MON' field sy-lisel+1(10).
    call transaction 'SMOD' and skip first screen.
    Regards

  • To populate condition in the sale order or a scenario in the USER Exit

    Hi Experts,
    I want to write the code in the USER EXIT to add a condition type in the Sale order when the ship-to-party address is changed in the transaction level from the address maintained in the Master data,
    So can anyone let me know is there any function module or how will i populate condition type.
    I found that the internal table XKOMV contains all the condition types.
    Thanks,
    Prem

    i saw the answer provided by u, i was pleased to find the answered way, so i writing back to u regarding my requirements.
    my requirement.
    while creating sale order, before entering the screen 4001 where we enter sold to party and material and order quantity, i need to populate these fields from my exit.
    i am able to populate the sold to party field from the exist  EXIT_SAPMV45A_002 and
    INCLUDE ZXVVAU04 .
    in the same fashion i need to populate my material filed.
    how do i do it

Maybe you are looking for