Trnsaction IW32  :  order  Could not be created for notification

Hello,
I have created the notification in  IW51
In trnsaction IW32  : I am getting error
Entry MT6
order  Could not be created for notification  3570075
Following error could occured : Entry MT6
Please help me out
Regards
Rahul

Hello,
IW51
Notification Type :Z2
Notification      : 3570065
Functionlocation  : XYZ
work Type         :cd  and ef
Main wotk centr   : ca110 /cusm
planner group     : msw /cusm
after I am saving -
notification 3570099  will saved.
Then when I am trying to change -
menu-service notification-change
I am getting one pop-up-it will directly going to workflow systemworkflow Inbox---
order not created for notification 3570099
follwing error occured : MT6
regards

Similar Messages

  • COREid Federation Error: A local user session could not be created for the

    Hi,
    I installed two instances of COREid Federation in my machine. Also installed SiteMinder and LDAP. Source Domain of COREid (8101) uses LDAP as IdMBridge and Destination Domain (9101) uses SiteMinder as IdMBridge. I am trying to access the resource protected by the SiteMinder from the source domain using the URL which is constructed using the pattern given in the PDF:
    http://mymachine.domain.com:8101/shareid/saml/ObSAMLTransferService?DOMAIN=DestinationDomain&method=POST&TARGET=http://mymachine.domain.com:8887/Source/Source.html
    Assertions are generated and I can see the assertion in the Source domain and transferred to the Destination Domain.
    I get the following error in the Destination Domain Shareid Log file:
    ERROR - [http10113-Processor3] - RECEIVER: ERROR: A local user session could not be created for the assertion
    Please help me to solve this issue?
    Note: The Web agent runs on the web server instance 8887.
    SiteMinder is able to protect the resource when accessed.

    Typically that error occurs when the destinations access management system can't find the user based on the SAML attribute. Check to make sure that the attribute that you are matching on matches exactly.

  • SHAREid - A local user session could not be created for the assertion

    Problem: We have a client trying to federate to our environment using POST profile but we are getting the following error, "RECEIVER: ERROR: A local user session could not be created for the assertion".
    I verified that the user exist in the directory and I am able to execute a test successfully as that user.
    Thanks.

    There is a requirement that the client needs to send an attribute called "traveler" in the assertion. We found out that the problem occurs only when client sends a attribute in the assertion. When the assertion does not include the attribute, there is no issue. Not sure why that is the case as we have other clients sending the same attribute in the assertion.
    Here is the AttributeStatement.
    <saml:AttributeStatement xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><saml:Subject><saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">XXXXXX</saml:NameIdentifier></saml:Subject><saml:Attribute AttributeName="XXXID" AttributeNamespace="http://schemas.xmlsoap.org/claims"><saml:AttributeValue>XXXXX</saml:AttributeValue></saml:Attribute></saml:AttributeStatement>
    It does not have <saml:SubjectConfirmation> and <ConfirmationMethod> element. Can that be a problem?
    Thanks,
    Vinay
    Edited by: user504421 on Jul 9, 2009 2:17 PM

  • ORA-20100: AppDomain could not be created for the specified security level

    We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
    ORA-20100: AppDomain could not be created for the specified security level
    ORA-06512: at "SYS.DBMS_CLR", line 152
    ORA-06512: at "SCOTT.GETDEPTNO", line 7
    Here is what I have done.
    (Server)
    1. Installed oracle 10gR2 with ODE.Net
    2. Installed Oracle 10gR2 patch set 22
    3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
    (Client)
    4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
    5. Installed patch set 22 on 10g client home.
    6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
    I have made some minor changes (GAC) etc. per the following threads...
    ODE.NET 11.1.0.7.20 on 10g Database?!
    Re: Error: System.TypeInitializationException
    The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.

    The KB article is almost what we have apart from theitalic underlined
    part
    Consider the following scenario:
    You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
    You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
    You open the Properties dialog box of a user account.
    The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
    You set the Remote Desktop Services Home Folderattribute to the shared folder path.
    NoteThis attribute is located on the
    Remote Desktop Services Profiletab.
    You click Apply or OK.
    In this scenario, you receive the following error message:
    The home folder could not be created because: The network name cannot be found.
    Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
    I think the important bit is
    The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
    We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

  • ISH-CO Integration (Case based order could not be created)

    HI,
    My name is Yael Jacobi; I am a CO implementer in SAP Project in Israel.
    The project is for a hospital in Israel.
    We are trying to implement the integration between the CO (Controlling) and the ISH module.
    I haven't found any valuable information in the internet until now.
    I will be grateful if you could send me any documentation regarding the ISH-CO integration
    I am trying to create a case based order (internal order that should be created for a case in the ISH) but with no success.
    I created an internal order type in CO and customize the relevant data ,in the basic settings for "SAP Healthcare-integration with controlling" ,but no case based order had been created .
    The revenue posted to the profitability analysis segment instead of the case order.
    Maybe do you have any idea why is that and what is missing?
    I would really appreciate it if you could help,
    Thanks in advance;
    Best Regards,
    Yael

    Hi Yael,
    first of all good to hear that you solved the problem. Actually we have a couple of similiar processes where SAP Patient Management uses "standard" ERP functionality in the background. Sometimes it is a good strategy to first check out whether the "standard" functionality works as expected by invoking the respective transactions in ERP manually (using the values which you lateron expect IS-H to use automatically). If they work according to your expectations you can then focus on the IS-H configuration.
    I'd like to come back to your point on the documentation. If you write that you think it was not good enough, I am sure you have some ideas how to improve it? As you may know we are moving more and more into collaborative documentation technology like Wikis. Would you be willing to maybe actively help improving parts of the documentation by sharing some of your experiences and knowlegde?
    For example, we could jointly start a Wiki page on the topic of IS-H/CO integration.
    Please let me know your thoughts.
    Best regards
    Claudius

  • HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

    When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the n

    When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!

    Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
    It has been unchecked somehow...
    Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
    Cheers..
    Nigel

  • "Your bootable USB drive could not be created" "Boot Camp only supports 64-bit Windows installation on this platform. Please use an ISO file for 64-bit Windows installation."

    I try to install windows7 system on my macbook air, which version is 10.8.5. When I open the bootcamp, it let me to choose a windows ISO image, which I've already downloaded from this website: http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325 /, it also asked me to select a USB drive, which is kingston that has 8GB. Then when I clicked "continue", it said that "Your bootable USB drive could not be created" "Boot Camp only supports 64-bit Windows installation on this platform. Please use an ISO file for 64-bit Windows installation." But actually the ISO image I downloaded is 64-bit windows7. I don't know why this would happen. Could someone help me please!!

    Thanks for your feedbakc Kiranjj!
    I identified the reason to be that the W8 installation file didn't download completely from a Mac OS-device. I downloaded from another Win-device and the moved the installation file with a USB-stick and then everything worked diectly! But thanks anyway.

  • The Application Data folder for Visual Studio could not be created

    Hi! My laptop was working fine but someone recently installed Malware Bytes to my laptop and supposedly found 4 problems and "fixed" them afterwards Visual Studio Professional 2013 and Chrome stopped launching. When I realized this happened I uninstalled
    Malwarebytes but it was too late. Every time I tried launching Visual Studio I would get a message that said something like: "Two or more components could not be found. Please reinstall". I did a "fix" on Visual Studio but this solved nothing
    only changed the message, the new message was "The Application Data folder for Visual Studio could not be created" so I uninstalled the program and all the extras I found on my Control Panel. Downloaded Visual Studio Community 2013 I'm trying to
    install it but I got the same exact message again. Why is this happening? What does it mean? Before I uninstalled Visual Studio Professional 2013 I looked for ways others solved it but nothing seemed to work. Please help. Thanks!

    Hello Danny,
    The Malware Bytes may have already modified some files/registry values/environment variable which is used by Visual Studio and may be the setup cannot create it for you again.
    Please try the workaround here in this blog:http://tutewall.com/application-data-folder-for-visual-studio-could-not-be-created/ and remember to backup your
    registry key before you do any actions to the registry table.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error: Data element for InfoObject AUFNR 0PM_ORDER could not be created(QA)

    Hi Experts,
    I am trying to Transport a request from DEV to QA,which consists Transaction Infosources,  afetr the inport the TR is failed with return code 8. and the error message in the log is as follows.....
    Error when determining a number from object BI_TSDTEL and number 01  
    Object name can only contain characters from syntactical character set
    Data element for InfoObject AUFNR 0PM_ORDER could not be created
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
    Data element for InfoObject TXTMD could not be created
    Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
    please Could anyone give the Inputs to solve this , I'll be greatful to you.
    Thanks & regards
    SK

    hello AJ,
    Till now the problem is not solved , Please provide some inputs.
    here I'm getting this problem for TXTMD, 0CO_AREA, 0PM_ORDER, 0DATE, 0PLANT, 0ORDER_CURR, 0LOC_CURRCY
    Error when determining a number from object BI_TSDTEL and number 01
    Object name can only contain characters from syntactical character set
    Object name can only contain characters from syntactical character set
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Transfer structure 0CO_OM_NTW_1_SB activated under the name 0CO_OM_NTW_1_SA
    It is not necessary to copy dependent objects for transfer structure 0CO_OM_NTW_1_SA
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Activating Transfer Rules 0CO_OM_NTW_1_SA ...
    23 Transfer Rule(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
    23 InfoObject(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
    Formulas have been saved
    PLEASE PROVIDE SOME INPUTS.........
    Message was edited by:
            S K

  • PO could not be creating using the Enjoy-BAPI

    Hi expersts.
    I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
    "Source not included in list despite source list requirement"  messages occur. Order won't be generated.
    When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
    Could anyone help me ?
    Thanks, regards.
    Dan.

    Hi expersts.
    I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
    "Source not included in list despite source list requirement"  messages occur. Order won't be generated.
    When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
    Could anyone help me ?
    Thanks, regards.
    Dan.

  • Error in File UNKNOWN.RPT: The request could not be submitted for backgroun

    I receive: Error in File UNKNOWN.RPT: The request could not be submitted for background processing.
    The error is on a windows Server 2008 SP2 production server. The report generates fine if I run it from within Visual studio 2008 on the server but not through IIS. The Crystal Reports is the version that came with vs2008 (10.5).
    Initially I was getting unauthorized access errors so I granted full access to everyone for the bin and managed crystal report folders under program files. This fixed the unauthorized access problem but now I get the background processing error. I also tried to inpersonate an admin account with the same result. I tried to copy the crystal reports dll's to the bin folder for the project but that did not help either. I am running out of ideas. I did notice that a 16kb rpt file is generated in the Windows/temp folder every time I try to run the report.
    the crashing page is here Link:[http://futuretechgroup.com/cgi-bin/crystaltest.aspx]
    Here is the event log:
    Event code: 3005
    Event message: An unhandled exception has occurred.
    Event time: 5/24/2010 12:24:56 PM
    Event time (UTC): 5/24/2010 7:24:56 PM
    Event ID: 87ee3d9297fb409ea7b440b059a0f07d
    Event sequence: 4
    Event occurrence: 1
    Event detail code: 0
    Application information:
        Application domain: /LM/W3SVC/5172/ROOT-1-129192026961318172
        Trust level: Full
        Application Virtual Path: /
        Application Path: C:\inetpub\vhosts\futuretechgroup.com\httpdocs\
        Machine name: FTG2009
    Process information:
        Process ID: 3644
        Process name: w3wp.exe
        Account name: FTG2009\IWPD_1(yanoshftg)
    Exception information:
        Exception type: CrystalReportsException
        Exception message: Load report failed.
    Request information:
        Request URL: http://futuretechgroup.com/cgi-bin/crystaltest.aspx
        Request path: /cgi-bin/crystaltest.aspx
        User host address: 70.173.237.72
        User: 
        Is authenticated: False
        Authentication Type: 
        Thread account name: FTG2009\IWPD_1(yanoshftg)
    Thread information:
        Thread ID: 5
        Thread account name: FTG2009\IWPD_1(yanoshftg)
        Is impersonating: False
        Stack trace:    at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
       at cgi_bin_CrystalTest.CreateReport() in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 15
       at cgi_bin_CrystalTest.Page_Load(Object sender, EventArgs e) in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 9
       at System.Web.UI.Control.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

    1. The OS is 32bit
    2. Yes. The C drive is the primary drive
    3. For the sake of simplicity and to troubleshoot the sample code has no datasource just 'Hello' in the report header. The Actual work order report that I need has ADO as datasource and it builds a PDF report without any problems when I run the page from VS2008 (development server) so I think the dll's are where thay are supposed to be. The c:\windows\assembly folder has about 25 CrystalDecisions files (10.5.37).
    Do I still need to create a deployment package even though I have everything else working?
    Below is the code I am using to create the report
        Sub CreateReport()
            Dim myReport As New ReportDocument
            'Try
            myReport.Load(Server.MapPath("CrystalReport.rpt"))
            'Catch ex As Exception
            'MsgBox(ex.InnerException.ToString)
            'End Try
            Dim g As Guid = Guid.NewGuid
            Dim woPath As String = "../FileTemp/" & g.ToString & ".pdf"
            'Try
            Dim CrExportOptions As ExportOptions
            Dim CrDiskFileDestinationOptions As New  _
            DiskFileDestinationOptions()
            Dim CrFormatTypeOptions As New PdfRtfWordFormatOptions()
            CrDiskFileDestinationOptions.DiskFileName = _
                                        Server.MapPath(woPath)
            CrExportOptions = myReport.ExportOptions
            With CrExportOptions
                .ExportDestinationType = ExportDestinationType.DiskFile
                .ExportFormatType = ExportFormatType.PortableDocFormat
                .DestinationOptions = CrDiskFileDestinationOptions
                .FormatOptions = CrFormatTypeOptions
            End With
            myReport.Export()
            'Catch ex As Exception
            'MsgBox(ex.ToString)
            'End Try
            Response.Redirect(woPath)
        End Sub

  • Account 'Cost elem. for settlmt AuC to CO objects' could not be found for a

    Hi All,
    we are facing one error massage at the time of settlment KO88.
    Account 'Cost elem. for settlmt AuC to CO objects' could not be found for area 01
    Message no. AU133
    Diagnosis
    When creating the accounting document, the system could not find account 'Cost elem. for settlmt AuC to CO objects' in depreciation area 01 for company code CSEB.
    Procedure
    Enter this account in the account determination for Asset Accounting.
    Thanks & Regards,
    juhi

    Hi Juhi...
    Please check the below procedure....
    If you are using the Internal order process, then
    KO01 - IO Creation
    ME21N - PO creation with IO as Account assignement
    MIGO
    MIRO
    1. IO to AUC Settlement
    Define the Settlement Rule iin IO - KO02   (AUC Asset)
    KO88
    Settlement type is  "Automatic"
    For Cost analysis....you can refer to KOB1   or    KO03 -> EXtras -> Cost Analysis
    2. AUC to Fixed Asset or Cost Center
    KO02 - Settlement Rule - Cost center   or   Fixed Asset
    KO88
    "Full Settlement"
    If the process is
    AIAB and AIBU
    Refer to
    AW01N
    Hope it gives some idea
    Thanks

  • Even after resets get "The backup disk image "/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle" could not be created (error 22)."

    HELP!  "The backup disk image “/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle” could not be created (error 22)."
    TC estimates over 750GB for full backup.
    Late 2010 MBA is connected wirelessly to
    802.11n (1st gen) TC that is connected via ethernet hub built into house to motorola router using charter.com for internet.
    I have had same problem for over 150 days and multiple reboots, restarts in proper order, firmware updates, unplugs with 5min plus gaps, bypassing the tc and using external 500gb WD mybook via usb to time capsule, replacement of the WD mybook to new 2TB Free Agent GoFlex drive, etc, etc, etc!  Note: I originally named my MBA hard drive MacBeth, but at some point months ago, it said backup already existed and system automatically created MacBeth (2), worked for a while, then stopped again, despite trying nearly daily.
    I gave up and started using Carbon Copy Clone daily for just the 128gb on internal SSD of my late 2011 11" MacBook Air, but need to get past these time capsule errors to back up the external disk!  Due to lack of space in MBA, I had long ago transferred both itunes and iphoto and all imovie/fcpx files to a 1tb external disk (WD Passport) that I keep in my bag with MBA.  It is partitioned with 150gb for cloning the MBA, and over 750gb for media/itunes/iphoto/etc.
    Also, I have endured months of "your hard drive is full" messages and system lockups, applying the solution given to me by genious bar (deleting all aol.com outboxes/recovered messages/spam/trash under library/mail/V2/Mailboxes folders, empty trash, restart....watch recovered hard drive space mysteriously shrink next couple days to zero.....repeat)
    Due to lack of space, I had not been able to do javascript and other system updates.  Yesterday, I noticed even safari bookmark bar had mysteriously emptied (not disappeared, I can hide and show the space where the bar used to be - it is just blank area with no data except for eyelass-book-topsites icons), so I transferred a few large quicktime movie files recorded with isight camera to the external disk, and freed up 20 gbs for the first time!
    This got my hopes up yesterday because after I completed all system/software updates, suddenly the bookmark bar showed up and I was able to start the time capsule backup! It took overnight preparing for backup, but finally started and progressed to 12gb of the 100gb+ needed (i guess the update where it left off months ago for the estimated 750gb for the full backup?), then I put system to sleep and took it with me (thus leaving the wireless time capsule network as I do daily fully expecting it to continue when I returned home in the evening.)  But alas, upon return, back to the "Time Machine could not complete backup, The backup disk image ".....sparsebundle" could not be created (error 22)"  Ugh!  More reboots, unplugs, 5min gaps....still Ugh!
    So the problem continues...please help!  Here are my settings:
    About this mac:
    Mac OS X V. 10.7.5
    processor 1.6 ghz intel core 2 duo, memory 4 4g 1067 MHz DDR3
    software up to date!
    Airport Utility:
    V 6.2 (620.33)
    both internet globe and TC show green dots in graphic, however internet occasionally shows yellow then goes to green, but still gets error 22.  Suddenly TC showed explanation mark and says lost connection and asked if I wanted to 'forget', gave same errors, then mysteriously went back to green, but still got error 22!.
    Internet:
    connection: connected, displays router address, 2 dns server, and domain name: charter.com
    Time Capsule:
    shows network, ip address, serial number, version 7.6.3, status: (green dot) Setup over WAN,
    wireless clients: phones, macbooks (including this MBA), printers, wii
    If you need other settings to help me, just ask!  I have read a few of the other solutions in forums, but trying not to erase disks, especially since it worked for a minute yesterday!

    To step sideways.. why not just use CCC to backup the 750GB of the hard disk to the TC.
    You need to understand this is going to be a super slow process and each time you stop it.. it is going to give issues. CCC will at least do a more reliable job of it than TM.
    I would also say.. this is going to be tough without ethernet. You need to understand the backup speed over wireless can be 10GB per hour.. that makes 75hrs to backup the disk. The air needs to run non-stop doing that.. without you touching it.
    I would get another external drive.. plug that into the MBA and if you really want to use TM.. make a backup one to the other.. but CCC will again do a better job and work faster. It will be much faster than over wireless.
    I am trying to think of ways around the issue of just speed.. but plainly you have lots of other issues.. being the simple unreliablity of the TM to identify the TC.
    If you want to make this work.. give yourself a weekend.
    Load 5.6 utility into the MBA..
    http://support.apple.com/kb/DL1482
    Take the TC back to 7.5.2 firmware. It is a really old version and latest firmware does it no good at all.
    Wipe its hard disk using erase and start over.. give it new names for everything.
    So call it TC
    Set the wireless to 5ghz and name it TC5ghz
    Use WPA2 Personal security. Use a 10 character passkey non dictionary.
    At 5ghz you should get 2x the speed as at 2.4ghz but the air will need to be right next to the TC..
    (alternatively buy the USB to ethernet cord apple have available.. it is $30 in the apple store and do it over pseudoethernet. http://store.apple.com/au/product/MC704ZM/A/apple-usb-ethernet-adapter That is the wrong store but you get the idea. )
    WIth a fully clean system.. now do a full reset of TM.
    See A4 http://pondini.org/TM/Troubleshooting.html
    Direct the TM to back to the TC.. and make sure the external hard disk is not excluded.
    Of course the TC has to be 1TB version to fit that much data.. goes without saying right.
    Even over pseudo - ethernet this will take many hours.. and you basically have to leave it to work.. do not touch it.. make sure the MBA cannot sleep though.. turn off sleep.. beforehand.

  • The payment group could not be authorized for payment:

    Hi All,
    I am facing one issue when ever I try to submit the order.Mention issues log below.
    at java.lang.Thread.run(Thread.java:619)
    17:30:09,608 INFO [CommitOrderFormHandler] DEBUG Acquired local write lock using id 140023
    17:30:09,631 INFO [CommitOrderFormHandler] DEBUG beforeSet created transaction TransactionImple < ac, BasicAction: -53edde10:dc90:51a34807:1077 status: ActionStatus.RUNNING >
    17:30:09,632 INFO [CommitOrderFormHandler] DEBUG no form errors - staying on same page.
    17:30:09,635 INFO [CommitOrderFormHandler] DEBUG no form errors - staying on same page.
    17:30:09,637 INFO [CommitOrderFormHandler] DEBUG no form errors - staying on same page.
    17:30:09,720 WARN [ValidatePaymentGroupByType] Returning default transition value 0 for unregistered property value cashOnDelivery.
    17:30:09,763 INFO [CommitOrderFormHandler] DEBUG PipelineError: key=FailedPaymentGroupAuth:pg50002; error=The payment group pg50002 could not be authorized for payment: The given PaymentGroup {0} cannot be processed because a processor was not configured for its type..
    17:30:09,763 INFO [CommitOrderFormHandler] DEBUG adding form exception: FailedPaymentGroupAuth:pg50002: The payment group pg50002 could not be authorized for payment: The given PaymentGroup {0} cannot be processed because a processor was not configured for its type..
    17:30:09,764 INFO [CommitOrderFormHandler] DEBUG root cause of exception: null
    17:30:09,764 INFO [CommitOrderFormHandler] DEBUG Transaction Marked as Rollback - redirecting to: error.jsp
    17:30:09,765 INFO [CommitOrderFormHandler] DEBUG afterSet sees currentTransaction as TransactionImple < ac, BasicAction: -53edde10:dc90:51a34807:1077 status: ActionStatus.ABORT_ONLY >
    17:30:09,765 INFO [CommitOrderFormHandler] DEBUG afterSet committing transaction TransactionImple < ac, BasicAction: -53edde10:dc90:51a34807:1077 status: ActionStatus.ABORT_ONLY >
    17:30:09,766 INFO [CommitOrderFormHandler] DEBUG Released local write lock using id 140023
    Could you please give suggestion how to resolve this issue.
    Thanks,
    Raj

    It seems like you have created a new payment group cashOnDelivery but have not configured the required property files required for its validation
    1) In /atg/commerce/order/processor/ValidatePaymentGroupByType.properties add something as following
    # Add a return code for your cash payment method
    returnValues+=\
    cashOnDelivery=5051
    2) then in CommercePipeline.xml add the mapping for the integer value specified earlier to its validator processor, something as following
    <pipelinechain name="validatePaymentGroup" transaction="TX_REQUIRED" headlink="dispatchOnPGType" xml-combine="append">
    <pipelinelink name="dispatchOnPGType" transaction="TX_MANDATORY">
    <processor jndi="/atg/commerce/order/processor/ValidatePaymentGroupByType"/>
    <transition link="validateCashPG" returnvalue="5051"/>
    </pipelinelink>
    <pipelinelink name="validateCashPG" transaction="TX_MANDATORY">
    <processor jndi="/atg/commerce/order/processor/ValidateCash"/>
    </pipelinelink>
    </pipelinechain>
    3) Create a new ValidateCash component and its class(which implements a pipeline processor) and in this simply return the SUCCESS code, or put any validation logic that you want to put for validating your new cash paymentGroup.
    This would solve the the current error you are getting,
    and If the PaymentManager, PaymentPipeline(The new createCahInfo and ProcessCash processor etc),OrderTools component etc have been confgiured properly for your new payment group then you should be able to submit the order.
    Thanks

Maybe you are looking for