Trouble setting up QT Pro

Okay I've never used this site so please bear with me.
Here's my problem...I need to export a dv out file I created inside my video editor program and I have done this a million times before. But suddenly I find a problem I've never encountered before.
I open QT Pro and click File then Export. Up comes a screen which is for save file as... I click on options and up comes a screen for movie settings. From here I set my parameters for my video by checking video and settings. Next I try to check sound to set my sound parameters but I can't because the check box is greyed out and non selectable. Why is this? I've never encountered this before.
Any assistance or advice would be most appreciated ASAP since I'm in the middle of a video edit and need to upload this .mov file to a web server for posting as a podcast .

The software should find the printer if both the printer and computer are on the same network.
Have you installed the HP software for the printer in any computer on the network?
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

Similar Messages

Trouble setting up Officejet Pro 8500 in network

I am wanting to set up a Officejet Pro 8500 909a into a wireless network. I have hard wired the printer into the router, followed the instructions given in the setup section, but am getting no where.... help please!
Thanks,
Tom

The software should find the printer if both the printer and computer are on the same network.
Have you installed the HP software for the printer in any computer on the network?
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

MSI X58 Pro - I'm having trouble setting up my first Raid 0 Array

Hey guys! I have an i7 920, X58 Pro, 3x2GB DDR3, Radeon 5850, 640GB WD Black (Windows 7 64 bit + applications) and 1TB Samsung F3 (backup) system and I'm having trouble setting up a raid 0 array. I recently decided to purchase two additional 1TB Samsung F3 harddrives in order to create a raid 0 array, while still keeping my original two harddrives separate. I installed the new harddrives today, installed the JMicron drivers that were on the drivers disk that came with my motherboard, went into the bios, and changed it from IDE to RAID. I then went into the raid bios, selected the two new harddrives and selected raid 0, saved everything and tried to load Windows and Windows refuses to boot up. I got an option to try fixing Windows but that didn't end up fixing anything. Finally, I was forced to go back into the bios and switch it from RAID back to IDE just to get Windows to boot up again. Does anyone know what I need to do in order to get this raid 0 to work? Thanks a lot in advance for your help!

Perhaps create a software RAID? You can do it in Windows through Control Panel --> Administrative Tools --> Computer Management --> Disk Management.
A quick guide: http://www.softwaresecretweapons.com/jspwiki/windows-7-software-raid-disk-partition-and-volume-context-menus

HT204053 I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

It's evident that you are using Snow Leopard or earlier (or very early Lion) since you have the now obsolete MobileMe preference pane.
The minimum requirement for iCloud is Lion 10.7.5 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
If you are running Leopard on an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further.

Trouble setting up a network printer

Hello,
I'm having trouble setting up the new printer. It's an HP ColorJet 2600n and it's connected to a Linksys WRT54GS wireless router. According to the limited instructions that came with the printer, I should be able to just plug it into the router and it will work. That's not the case. We have 5 computers that will be using the printer.
1GHz Imac PowerPC G4
Dual 2.3GHz PowerPC G5
Dual 3.0 Xeon Mac Pro
a 5 year old G4 laptop
2.0GHz MacBook Pro
All of the computers are up to date with OSX and all other updates. the laptops and the Imac are on the network wireless. What do I have to do to get this printer working? Networking and whatnot is not my area of experise so I don't really know where to begin or what to look for.

the 2600n is a Bonjour-only printer. When you Add in Printer Setup, you just look for it to appear in the Default Browser window and select it.
Because HP installers usually screw up permissions, you should repair permissions (Disk Utility) and restart the Mac(s) before attempting to Add the printer.
I don't have a Linksys router - it is possible it blocks mDNS (Bonjour). Maybe there's a firmware update? I would check several sources before updating the Linksys firmware - they have been know to have negative effects on Macs.
Just checking - do you only have one router or a router plus wireless base station (like Airport Extreme)?

Setting up MacBook Pro with HP Photosmart C4780

I just bought my MacBook Pro and got an HP Photosmart C4780 printer with it. But I'm having trouble setting it up to work wirelessly (it's a wireless printer). It can't find my wireless network even though I'm sitting right next to it.
Can someone help me please?

I usually get the driver package off the HP website instead of using what's on the disk packed with the device.
I just bought my MacBook Pro....
If your MBP is truly "new" and not a pre-owned one that's new to you, there is a separate forum for the newer ones (black keys) here:
http://discussions.apple.com/category.jspa?categoryID=251
Their hardware is somewhat different than the older MMBP models covered in this forum so, should this be a hardware issue, someone in the other forum is more likely to have current experience with it.

Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

Install this to get X11 functionality back in 10.8
http://xquartz.macosforge.org/landing/
Worked great for me and others.
Jerry

Having trouble setting up my website. It's probably a silly mistake.

So I've registered a domain and hosting plan with A Simple Orange which had a pretty good deal since I had a coupon for 20% off. I've tried using Joomla to manage my website, but I couldn't get the hang of it. So I'm trying out iWeb 09' now and just having trouble setting it up. I've gone to me.com and added my website and added the CNAME correctly I hope. Here is a picture. http://imgur.com/XI8Lw.png
Next I opened iWeb and setup MobileMe in the preferences panel. I've tried publishing the information from iWeb to my website, but my home page doesn't change. You can see here at RyanSchefer.com that it's just plan

No. Your CNAME setting is not correct. The CNAME and web.me.com are correct with web.me.com being your host. However, your domain name is incorrect - don't understand why you have put mobileme before it? You just enter either your domain name on its own so domain.com or you need to set up two separate CNAME entries, one being for www, CNAME, web.me.com and then one being @, CNAME, web.me.com. The @ stands for your domain name and the www is your sub domain.
Try altering this and it should work okay.

Having trouble setting up email accounts in the mail app?

Hi Apple community,
I am having trouble setting up my email accounts with the osX mail application. I have two accounts, an outlook and my college email through google. When I try to add the outlook account the prompt says that it cannot connect to the server and when I try my college mail i get the following prompt.
"Trying to log in to the Exchange server “autodiscover-s.outlook.com” failed. Make sure the email address and password you entered are correct, then click Continue."
Please note that my college account is run by gmail and ends in murraystate.edu
Thanks, Will.

Hey will,
okay for your college email. Heres what you do.
Try adding your email and wait for the message to come up
Trying to log in to the Exchange server “autodiscover-s.outlook.com” failed. Make sure the email address and password you entered are correct, then click Continue."
Once it does, you will notice 2 extra boxes One says username and the other password. You will notice that the username will not have @murraystate.edu
Add this and continue and this should now be added as an email account and should be able to receive emails as normal.
For your outlook emails, I would recommend using the following article to set it up. It is fairly straightforward.
http://howto.cnet.com/8301-11310_39-57602775-285/how-to-set-up-mac-mail-to-use-i map-for-outlook.com/
Hope that helps.

Having trouble setting up FaceTime. keep giving me Apple ID password

having trouble setting up FaceTime. trouble at verifying use I'd. I have my email setup with different password since I have tw setup email. my Apple ID has different password. same email name.

Hello sangjaimepark,
Thank you for the details of the issue you are experiencing with activating FaceTime. I recommend reviewing the article below for FaceTime activation issues. When trying to activate FaceTime, you will need to use the email address you use for your Apple ID and your Apple ID password and not your email password:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thank you for using Apple Support Communities.
Best,
Sheila M.

Having trouble setting up network

Hi guys,
I just recently moved to a new house and am having trouble setting up the network with my airport extreme. There is a cable modem that is networked to the house so that every room has an outlet.
I connected the airport to one of the outlets with my macbook and when I create network, I cannot connect to the internet wirelessly even though the macbook detects a network when I set it up with bridge mode. But hard wired through the router I can surf the web as I am doing right now.
When I hit share an IP address, the internet does not work at all. It seems to work fine with my old netgear router, but would prefer using the airport.
I've also reset the airport as well with still no luck. Any help would be appreciated. Thanks

Have you tried powering down the modem for 5 min and then turning on with the ethernet connected to the WAN port of airport extreme?

Having trouble setting up e-mail on new iPhone 4s. I would like to sync with my outlook mail, contacts

I am having trouble setting up my email and syncing my outlook calendar wiht my new iphone 4s.

How do you connect to the internet?
Most of the time, the problem lies here. You can try a couple of things. First, try only 3G or carrier data. Then, try only wifi. If that still doesn't work, your only other option is to try a different hotspot.
I had the same problem before when I updated to iOS 4.3. I thought it was the update at first. I usually have the carrier data turned off because my plan doesn't have an unlimited provision for it. I forgot that I also switched ISPs from DSL to a visibility unit package - meaning I had to setup my laptop so that I could get wifi from it. I realized this when I visited a friends house that I knew I could connect properly before.
My problem was with my laptop. It seems that Little Snitch blocks the ports being used for mail and push notifications. I haven't figured it out exactly since I still can't get email when I'm using my laptop connection. But, it works fine when I'm using ONLY 3G or both/wifi only if connected to a different hotspot.
Hope that helps.

Having trouble setting up a linksys WRT54GS router with v...

Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self but the router will not connect to the internet when installed like the cd tells you to.
online help and phone help has been less than helpful, anyone have any Ideas?

Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field. PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas?

Can I set up a pro forma for multiple images

Hi all
Well I am a newbie to Keynote and I am really enjoying using it.
I am trying to set up a pro forma for class photos at a school, the photos have been handed to me by the teachers but are all slightly different sizes.
My question is can I set up some sort of master document where I can place the photos (head shots) of the students with their names under them ready for a keynote display and have the photos all the same size without editing them separately.
I need to be able to remove photos occasionally too (ie if they are absent etc) so would need it to be a 'changeable' master rather than a screen shot. The amount of students in each class varies from 15 to 29 so I would need to accommodate the 29 with names under them and a heading somewhere on the page.
Is it doable? Do I do it straight into the keynote or onto a pages document first?
Thanks in advance for any help advice you can give.
Regards
Alitheste

The Mac OS X Mail application has a "Junk" function that works locally, on the Mac, and just puts emails from previously designated "junk" addresses into a separete folder, so you don't have to wade thru all that spam in your Inbox. It's a very elegant and simple, local solution, that I dearly miss on iOS.
I did submit a request for it at Apple Feedback page.
http://www.apple.com/feedback/

Trouble setting up HP Laserjet 4

I have a HP Laserjet 4 plus, which is a nice old PCL printer, and I'm
having trouble getting my Macbook Pro to print on the thing.
According to the literature, I should use a parallel (IEEE-1284) to USB
cable and try either the HP driver (HP LaserJet 4 Plus v2013.111) or
the Gimp-Print v5.0.0-beta2 driver. In any case, I seem to have
no communication between my computer and this printer. The
computer detects my cable and seems to have a driver for it. However,
I can't print anything -- I just get log messages of the form
Jun 25 16:22:02 hostname kernel[0]: USBF: 27438.618 AppleUSBUHCI[0x2db7000]::DoIOTransfer - error 0xe0004051 queueing request
Jun 25 16:22:04 hostname kernel[0]: USBF: 27440.617 AppleUSBUHCI[0x2db7000]::Found a transaction which hasn't moved in 5 seconds on bus 29, timing out!
repeated indefinitely.
My USB port is fine. I have no way to test the cable. The printer
works nicely with my linux systems.
I wonder if anyone has any experience to share, positive or negative.
/Graham Denham

I have a HP Laserjet 4 plus, which is a nice old PCL
printer, and I'm
having trouble getting my Macbook Pro to print on the
thing.
According to the literature, I should use a parallel
(IEEE-1284) to USB
cable and try either the HP driver (HP LaserJet 4
Plus v2013.111) or
the Gimp-Print v5.0.0-beta2 driver. In any case, I
I forgot that I had asked this question here. Briefly, I found that trying a different brand of USB-parallel cable solved the problem. See my post
listed under:
Re: Parallel to USB printing
Posted: Apr 16, 2007 4:35 PM in response to: Chuck Wack

Trouble setting up QT Pro

Similar Messages

Maybe you are looking for