Trouble Sharing Project as AVI

Recently I found the save as an .avi file missing from the share menu in Premiere Elements 11. After reinstalling twice, I finally got it to reappear but a few days later it is gone again. I've searched all over the Internet and Adobe.com for the cause and fix for this strange probelm, but as of yet have found no answer. I've had to start using the previous version of Premiere Elements I own, version 7, to save in the .avi format and have not experianced the same problem with that version.
If anyone can help me figure this out, I'd very much appreciate it.
My computer is a custom build with Win7 Premium.
John

Welcome to the forum.
I have never read of the AVI option disappearing from PrE. There are basically two, MS AVI (where one can then set the Compression CODEC), and the DV/DVC AVI, which will produce a DV AVI w/ the DV/DVC CODEC. Do both of those disappear on you?
Normally, we suggest the DV-AVI, as its compression is only about 5%, and those are the files that PrE was written around for an SD (Standard Definition) Project.
I often use the MS AVI, with one of the lossless CODEC's, like Lagarith, or UT Lossless. Those files are a bit larger, but are visually lossless. This helps out, if I need to migrate the output files for later editing in other applications, such as After Effects.
However, for most one-trip operations, the DV-AVI works very well, with little, if any, visual loss in quality - until one gets to about 3 generations.
You mention PrE 7, but it seemed that that was the version that you have fallen back to. If that is correct, what version was losing the AVI format?
Good luck, and I hope that others have seen this, and will have some useful input for you.
Hunt

Similar Messages

ManualResetEvent and Using a project reference in Shared Project?

I recently just started writing an Universal App for the first time, and it’s also my first time with C# (most of my mobile experience is in Java and Android). I was reading a post on SQLite-WinRT:
http://andywigleyblog.azurewebsites.net/?p=53.
I’m having trouble with two things:
ManualResetEvent seems to be available for Windows Phone Silverlight, but not a part of the Windows Modern App APIs. I’ve searched in the available .NET APIs, but System.Threading doesn't have ManualResetEvent for modern apps.
For Universal Apps, App.xaml.cs is located in the Shared Project Reference. However, from the shared project reference, I need to access a reference SQLiteWinRT, but the reference is in my modern app project, so I can't access it using 'using'. How do I
access this reference from a Shared Project Reference?
Edit: #2 I was able to figure out. I had to add SQLiteWinRT to both Windows 8 and Windows Phone project.
Edit: #1 Turns out it is available. Under System.Threading. Windows dev/center search just can't find it. (－‸ლ) The docs are very confusing.

Hi Qoheleth07,
Thanks for sharing the solution with us, I will mark Matt's reply to close this question, if you still have questions to ask, please feel free to let us know :)
Thanks for your understanding,
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cannot load shared 'project' in Windows Universal app after upgrading to Azure SDK 2.6

I've just installed the
April 2015 release of the Azure SDK. It is version 2.6 and previously I was on 2.5. Now one of my projects will not load. It is the shared project in a Windows Universal application.
When I right-click the project and choose 'reload' I get the pop-up error
> The method or operation is not implemented
The output window gives more detail:
> Things.Shared.shproj : error : The composition produced a single
> composition error. The root cause is provided below. Review the
> CompositionException.Errors property for more detailed information.
>
> 1) No exports were found that match the constraint:
> ContractName
Microsoft.VisualStudio.ProjectSystem.References.IBuildDependencyProjectReferencesService
> RequiredTypeIdentity
Microsoft.VisualStudio.ProjectSystem.References.IBuildDependencyProjectReferencesService
>
> Resulting in: Cannot set import
> 'Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService.ProjectReferencesService
> (ContractName="Microsoft.VisualStudio.ProjectSystem.References.IBuildDependencyProjectReferencesService")'
> on part
> 'Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService'.
> Element:
> Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService.ProjectReferencesService
> (ContractName="Microsoft.VisualStudio.ProjectSystem.References.IBuildDependencyProjectReferencesService")
> --> Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService
>
> Resulting in: Cannot get export
> 'Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService.WireUp
> (ContractName="Microsoft.VisualStudio.ProjectSystem.ConfiguredProject.AutoLoad")'
> from part
> 'Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService'.
> Element:
> Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService.WireUp
> (ContractName="Microsoft.VisualStudio.ProjectSystem.ConfiguredProject.AutoLoad")
> --> Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService
The other parts to the Windows Universal app (the Windows 8.1 project and the Windows Phone 8.1 project) have two Azure NuGet packages installed: Windows Azure Mobile Services 1.3.2 and Windows Azure Storage 4.3.0. (N.B. Those two projects load without issue.)
This is not a show stopper for me since uninstalling the Azure SDK 2.6 removes the load failure. To uninstall I go via the Control Panel to 'uninstall or change a program' and then uninstall Microsoft Azure Tools for Microsoft Visual Studio 2013 - v2.6
I would like to know how to fix this without uninstalling the Azure SDK 4.6.

Hi
Have the same problem and waiting for an answer also.
Code is like a box of chocolates!...

Shared Project Workflow Problem: Hitting a Wall with Markers

Hi there,
Apologies in advance for the long note. We're using Adobe CC to edit and finish commercials and are having a significant issue regarding shared project workflow. First, some context:
We often edit projects remotely. When this happens, assistants and other editors who remain in LA will have access to the media on our SAN while the editor and assistant traveling out of town will have their own copy of the media. I know Adobe Anywhere would solve any issue relating to two identical sets of media in use in different cities, but we're a small shop and the hardware and software expense don't make sense for us at this time. Please do not respond to anything mentioned from here on by stating we should just get Adobe Anywhere. Thanks.
What will regularly happen is that the remote editor and assistant will need work done on the project here in LA while they're in session with the clients. Sometimes this work involves marking up clips with comment markers so the editor can more easily locate a specific moment. Here's where the problem arises.
Unlike FCP and Avid, Premiere handles markers within the clip's metadata. So, if I have two separate projects linking to separate but identical instances of media, one of those media instances gets updated with new markers, there is currently no way to get those markers to the other project without also shuttling the new marked-up media. This is not possible when a remote editor needs dailies marked up in a couple hours and is working across the country or abroad.
But let's assume for the sake of argument that it is possible and we apply this workflow. Let's also assume that in the time it takes the local assistant to mark up the clips for the remote editor, the editor has added a couple markers of his own, which is reasonable and happens all the time. Now when the editor links to the newly marked up clips he's received via shipment, he'll wipe out all the markers he's made on his own since giving the order to mark up the footage. That is a significant inconvenience, especially with clients in the room asking stuff like "can we look at the take where the guy says 'good' instead of 'great'?"
So what happens if we just have repeating sets of media, so that every time the clips markers get updated, the editor actually imports those clips, even though the picture and audio data in those clips is completely redundant to what's already in the project. The issues with this are, as I can see it, 1) increasing the amount complexity within the project so that you'd have to scan many bins of dailies to look for a single marker, 2) increasing by orders of magnitude the amount of storage space needed, 3) even if problems 1 and 2 are handled, if you have to go to finish with multiple versions of a cut, and those versions reference separate instances of the same clip from different bins, Premiere's dupe frame detection will not work and you'll need to spend a lot of extra time locating duplicate clips manually before sending your EDL or XML off to final color grading.
At this point, I think it's necessary to interject something: we're talking about markers here. Why is this such a problem? FCP and Avid have no such issues simply by making markers - even clip markers - part of the project metadata. From what I understand, Adobe has chosen to do things differently because of dynamic link, so that After Effects and Prelude, for example, could add markers to a clip and those markers would ripple across all instances of that clip in the different applications. It's a great feature which we take advantage of here from time to time.
So what's the solution?
My workaround in CS6, which does not solve the issue of needing to merge clip markers so that an editor's markers and an assistant's markers can be applied to a single piece of media, was to turn off "write XMP ID to Files on Import." This would generate an XMP sidecar file which could be easily passed along with a project file to the remote editor, who could then overwrite his local XMP sidecars with the new ones containing the new marker info.
However, in Premiere CC that is no longer possible. It appears that if Premiere CC can access the XMP ID on a file, it will not generate a sidecar regardless of what you have set in your media preferences. We use ProRes Proxy as our dailies format (again, please no comments on this, it is not up for debate at this time) and Premiere can get to the XMP ID within the files and will not, no matter what it seems, generate an XMP sidecar.
We could change the company workflow to use DNxHD 36 instead of ProRes Proxy, which would give us XMP sidecars, but that would not solve the issue of needing to merge marker lists between projects non-destructively.
The best solution I can think of would be to have a script or some kind or built-in feature which would allow for the batch export, import and merging of marker lists. This way Adobe could keep its current clip-metadata-based marker workflow while giving professional users needing more flexible marker behavior the ability to have assistants non-destructively modify clip markers without necessitating the creation of extra media or project complexity.
I would really love some input on this and ideas from the pro community out there who has experience with shared project workflows - especially projects being shared remotely. There's not a lot of info out there about this and it would be great to hear what others are doing.
Thanks a million for sticking with this, if you've made it this far.
Best,
Jon

Thanks Jim,
I understand that Adobe Anywhere solves this, but there should be this fairly basic functionality (which exists in Avid and FCP) in a non-enterprise edition of the software. I have submitted a couple different feature requests about this, going back to CS5, so hopefully enough people make similar requests for a fix to be implemented. Adobe Anywhere is really not a solution for our small shop as currently configured/priced, especially when we can have editors working remotely with very affordable USB 3 drives. The only hangup is the markers, which just isn't worth a 5 figure fix. As such it's hard to consider the problem solved for either us or any small shop or post crew.
Best,
Jon

I'm having trouble sharing my i pod list with my other computer. I authorized both computer's, but list is not showing up in my laptop. (2nd generation Ipod nano)

I'm having trouble sharing my Ipod list with my other computer. ( lap top) I authorized both computer's for home sharing but the list is not showing up on my laptop. My I pod is a second generation nano. So how do I get it to show up on my laptop?. Also I only have two computer's but it's authorized with 4, two were old computer's, how do I take them off the list without deauthorizing all 4 computer's,? Or do I have to deauthorize all 4 and then authorize the two I have now? my desk top pc is operating on vista, and my laptop is operating on 7. Does that make a difference? HELP! thank you.

iTunes Store: About authorization and deauthorization
iTunes 10 for Windows: Authorize a computer to play iTunes Store purchases
iTunes: Frequently asked questions about viewing and syncing videos
iTunes 10 for Windows: authorize
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows

How to make a good quality 8 Giga DVD out of a Project in AVI of 14 Gigas?I have a film in a proyect

How to make a good quality 8 Giga DVD out of a Project in AVI of 14 Gigas?
I have a film in a proyect made with a miniDV camera in my old Premiere 6.5
It has 68 minutes and after exporting it with the Microsoft DV AVI compressor in 100 % quality and not compressing the audio, it ended in an AVI of 14 Gigas.
I would like to obtain a DVD of the best quality in audio and video possible. How can I do it? SHOULD I EXPORT IT FROM THE PREMIERE 6.5 WITH ANOTHER COMPRESSOR OR IN LESS THAN 100% QUALITY WITH THE SAME DV AVI COMPRESSOR ? my INTENTION IS TO USE THE NERO VISION AFTERWARDS... I HAVE THE NERO VISION 4...-. FROM 2007- WOULD IT BE OK OR IS THERE A BETTER ONE? - I know there are newer ones...but better?
I HAVE POSTED THIS A FEW DAYS AGO. THANKS TO THE PEOPLE THAT REPIED. BUT I THINK MY QUESTION IS NOTFULLY ANSWERED YET.
i NEED THE BEST QUALITY I CAN GET, EVEN WHITH MY PREMIERE 6.5, BECAUSE IT IS A FEATURE FILM THAT TOOK ME SEVERAL YEARS AND THIS LAST REMAKE IS NOW READY AFTER TOO MUCH WORK.
THANKS A LOT !!!!!!!!!!!!!

Hello Thanks for your replys and sorry for being so fussy about this.
I have now seen that one of the options for exporting from Premiere 6.5 is Adobe MPEG encoder. So Do you guys think it would be a good idea to do it with that, Or Would it be better AVI or DV AVI compressor from Premiere before making the DVD?
I have the Nero Vision 4.9.6.6 But I may be able to look for another one if you think it is better...
Thanks a lot for your advises...

Can't create shared project in MII

The MII architect is trying to create a shared project in the Workbench and is receiving an error. It looks to me they have something already checked out and thus cannot create the project. Could this be something wrong in the NWDI/MII configuration. Any suggestions on what I can do to find the cause?
Here is the error:
Error while creating the Project hierarchysahad
[EXCEPTION]
com.sap.xmii.contentmanagement.exception.ContentManagementException: Cannot create resource sap.com.miitest1; parent resource is checked out for create in a separate activity
Thanks!

Hi,
The CE/MII system is running NW 7.11 SPS7
The NWDI system 7.0 EHP1 SP3
We are creating a shared project in the MII Workbench within the "File" menu "Created Shared Project".
I'm the Technical BASIS lead here and the MII team is saying this error is a system error. I don't know enough about MII and the development environment to argue this point.
Regards...

Anyone having trouble sharing large images via email with Aperture 3 and OSX 10.7.2?

I am having trouble sharing images via email with Aperture 3. No matter what size I have in the preferences, the image is thumbnail size. The requested size flashes on the email a couple of times but the small size remains and is sent. I am using OSX 10.7.2. Any suggestions how I may send larger sizes?
oldgranddad

I have taught many how to use GUI-based computers. The number of controls they are aware of on the screen always progresses, usually linearly with the amount of time they spend actively learning the GUI. Beginners are totally flummoxed that windows can hide other windows. A step beyond that, they are amazed that they can resize windows using the mouse cursor. Those two are trivial to most users today, but they illustrate 1. that there is nothing "intuitive" about the GUI, and 2. that the amount one perceives is dependant on the amount one knows. IME, this has nothing to do with age, and everything to do with experience using a GUI.
Here is a good hint: if you are using a Mac and can't figure out how to do something, look for something to click. If you find something that seems promising, try "{Option}+clicking".
The interface is richer than any one person can master. Frank's statement "most times we all fail to see everything " is, imho, _always_ true. We never see everything, even in the grossly limited resolution of our computer screens.

To revoke your sharing invite with this user, please use the Manage shared projects dialog box.

How do I remove someone from the shared project dialog box? And how to install Adobe Story on my desktop without getting an error message?

How do I remove someone from the shared project dialog box? And how to install Adobe Story on my desktop without getting an error message?

Trouble Sharing, Trouble Sharing

Well, I am once again having troubles sharing my video. I use my Canon 3Ti and use Raw for my video and images. I use a program to pre-render my video to Apple ProRes 422. Then I import that into FCPX. I actually got it to share a copy of my latest video but only in Apple 720 Resolution. I tried in 1080 and it just stalled out at 10% completed. I tried to share it like I normally do as Apple ProRes 422 then open that in Quicktime to send it out as a smaller format for the web. I have done something a bit different in this video but nothing that I figured would cause a problem. One is I used a stock sound and I used a theme CoverFlux for the starting of my video. Other than that nothing changed from my last video except that I updated it again.
Pete
I had it set to share in full Apple ProRes 422 native of my rendered video from raw and it stalled at 1% for over 4 hours.

Well I do have my settings for at least images on RAW. I assumed it was the same but I see it is not. I was told that FCPX works best with Apple ProRes 422 format so I have been pre rendering to that before importing. Had been working great. I found that it actually did out put but it did take longer the last time. Going to try a few other things to see if it will speed things up. One was to not have the video prerender when imported. That did help until the last upgrade.
I really don't like playing with things. They should just work.
Pete

Having trouble sharing my folio with a client

I'm having trouble sharing my folios with clients. I clicked the share button and sent the e-mail to the client. They received the e-mail and signed up for an adobe account. When they try to log into Adobe Content Viewer on their iPad using their Adobe credentials they keep getting log in failed notices. Does anyone know why this is happening? Thanks.

After they log in and accept the terms they should be able to log into the ACV with that account and download the folio.

Trouble sharing photos between devices via iCloud photostream

I have trouble sharing photos in my iPod 4th generation with an iPad 2 user. I've sent an invitation to an iPad user to share my shared album with him but he didn't receive any email regarding on this invitation. Whereas, when the iPad user invite me to share his album, I've receive the email and joined his photostream. Unfortunately, the album didn't appear in my iPod. Can someone help me identify the problem? Thank you

Hi LCelineee,
Thanks for visiting Apple Support Communities.
These tips may help if your shared photo stream invitation is not being received:
I've sent email invitations to my shared stream, but not everyone received one.
Try these troubleshooting steps:
Ask the person you're inviting to check any junk or spam email folders for the invitation.
Try resending the invitation. If a recipient still doesn't get the invitation, send it to a second or alternate email address for that person. The recipient's mailbox may be full, or either the person or the email service provider may have a filter that is preventing the email from being delivered. If you're using iOS 7, you can also send the invitation to the phone number that the recipient uses for iMessages.
If the person has received an invitation at least once in the past, that person may have opted to unsubscribe from future iCloud Photo Sharing emails. See the section on opting out of emails, below, for more details.
If none of these steps resolve the issue, contact Apple Support for further assistance.
You can find the article with these steps here:
iCloud: Troubleshooting iCloud Photo Sharing and Shared Photo Streams
http://support.apple.com/kb/ts4379
Best,
Jeremy

Shared projects in WLW 9.2

Hi,
I move my apps from WLW 8.1 to 9.2. My workspace contains 4 apps (ears),
each has a number of utility and web projects. Some utility projects from
ear 1 used in ear 2, 3 and 4. Everything is compiles fine, but I can't
deploy ears 2, 3 and 4: I always have ClassNotFound exception for some class
defined in project from ear 1. I tried to refernce the utility project from
Java Build Path, J2EE Module Dependencies and Project References pages but
nothing helps.
Should I deploy the utility project(s) independently as Shared Library or
Optional Package ?
Thanks, Denis.

Hi Denis,
I've created a simple application in Workshop 9.2.1 which demonstrates
the relationship I mentioned in my previous post. I've taken out the
upgrade scenario here, but it can easily be reintroduced, but will
require some additional tweaking, sine some of the relationships didn't
exist in 8.1
javaproject is a simple Utility project
ws1 web service project which belongs to ws1EAR
ws2 web service project which belong to ws2EAR
javaproject has been added a J2EE module to ws2EAR, which is why when
you select ws2 and view j2ee module dependencies, you will see
javaproject listed in both tabs
whereas in the case of ws1EAR, the javaproject is not directly part of
the EAR, instead it is only visible to the web project ws1, since it's
been configured at the web app level.
if you export the EAR for these two EAR projects you will notice that,
in the case of ws1EAR, the javaproject jar is within ws1.war under
web-inf/lib, whereas in the case of ws2EAR.ear, the javaproject jar in
the app-inf/lib
please do attach the support case numbers once you create them.
hope this helps
cheers
Raj
Denis Sukhoroslov wrote:
Hi Raj,
Ok, I'll open the support case and probably not only one, this is not the
only issue I have. But for the problem we're discussing I suspect there is
still some misunderstanding. It doesn't relate to uipgrade process at all.
When I upgraded my apps from 8.1 to 9.2 the shared jars were propely copied
into app-inf/lib directories of ears which use them. I removed the jars
becase they shouldn't be longer needed at least at build time.
Unfortunatelly the shared jars are not final. And I can't configure J2EE
module dependency as you suggesting: shared utility jars are used from
another utiity and ejb projects (jars) which belongs to the defferent ears.
This type of projects (utility jar and ejb jar) doesn't allow to make a
depenedency on projects which are not in the current ear.
BTW, when I exported my ear projects to EARs WLW added the shared jars into
all ears that reference them properly. But it doesn't add them in expoided
format.
Denis.
<Raj Alagumalai> wrote in message news:[email protected]...
Hi Denis,
Looks like the issue you are facing is slight different from what I assumed.
Regarding a possible solution, you can do either one of the solutions you
described. These would be appropriate if the shared project is final and you
no longer envision changing or updating it. If however if you do plan on
making modifications, I would suggest that you use add the Utility project
to all 4 EAR project via J2EE module dependency or to each web project via
J2EE module dependency. The EAR level dependency will copy the final jar to
app-inf/lib whereas the second option will copy the jar to web-inf/lib
As Bill mentioned, I recommend that you open a support case to make sure
that the dependencies are set up correct.
I will also try running your 8.1 upgrade scenario where a custom jar is
placed in the app-inf/lib in the 8.1 application.
Cheers
Raj

Sharing projects between libraries

I'm looking for a solution to share projects in sync between multiple libraries, without having to export & import projects each time. I'd like the shared projects to be in sync between the libraries.
I'm putting together a highlights portfolio, so in each of my many libraries, I have a "best of" project for the selects. I'd like each of these "best of" projects to be seen by a separate library which is just used to make my portfolio. Any time I update the best of in a given library, I'd like that to be reflected in the shared project in the portfolio library.
Is there a solution/workaround for this?
I found a free script that is supposed to make this possible, but I've had no luck with it thus far...
http://tinyurl.com/ApertureSpanning
Thanks!
GPM
I'm running 2.1.2

Thanks a lot for your response, RB -- I read the page you referenced:
http://photo.rwboyer.com/2008/09/managing-aperture-2-on-multiple-computers/
And maybe I'm missing something, but I don't believe that either of these two approaches solves my particular problem?
It seems that both approaches require that you import/export projects, or relocate masters, etc. What I'm looking to do is have projects from multiple libraries synced with each other "live", with out having to import/export or manage anything manually.
Simplest example: I have one library called "Brazil," and in it I have a project I've named "Best of Brazil". I have another library called "Portfolio," where I pull together all my best work from various projects. What I want is for the "Best of Brazil" project to show up automatically in the "Portfolio" project. And anytime I'm in the Brazil library & add some new shots to the Best of Brazil project, next time I go into my Portfolio library, those new shots or edits should be automatically in the mirrored Best of Brazil project -- inside the Portfolio library.
It's kind of like seeing & accessing other libraries, but only projects you've designated as shared...
Any thoughts?
Thanks a lot!

OSB 10.3.1 Sharing projects across OSB Configutrations

Hello,
I am trying to maximise code resuse by creating projects that are shared across different OSB configurations. Examples of such projects include those that have resources such as WSDLs and Schemas or XQuerys. I tried to do this using the following steps:
1. I created a workspace
2. I created an OSB configuration (Ocfg1) in that workspace
3. I created a project (Common) that I wanted to share in that OSB Configuration
The first challenge is right here. A project seems to be tied to a configuration. However, if you inspect the project contents there is no reference to the OSB configuration that it is contained within. The association is defined in a file in the OSB configuration project.
4. I created a second OSB Configuration project (Ocfg2) and edited the file in this configuration project (as mentioned above) to add a reference to the shared project (Common).
This second OSB configuration did not show that the shared project was part of it even after refreshes of the view. After restarting Workshop, I found that the shared project was now in the second OSB Configuration project (Ocfg2), but was deleted from the first (Ocfg1).
Thus within a workspace in Workshop, an OSB project can only be added to a single OSB Configuration project it seems. I could therefore create two workspaces, but then I would need to copy the shared project which is exactly what I wanted to avoid.
This appears to be a severe restriction of Workshop for OSB 10R3.1. Any ideas?
Thanks in advance,
Adil.

I know this thread is a little old, but the same issue still applies in OEPE 11.1.1.7 and OSB 11.1.1.5. The workaround I implemented was:
1) Put all of my OSB projects in a folder (for easy version-controlling)
CommonArtifacts
MyProject1
MyProject2
2) Create an OSB Configuration Project for each Project. So now that folder looks like:
CommonArtifacts
MyProject1
MyProject2
OSB Configuration - MyProject1
OSB Configuration - MyProject2
3) Create 2 workspaces in OEPE
workspace_MyProject1
workspace_MyProject2
4) Switch to workspace_MyProject1
Import Eclipse Projects:
- CommonArtifacts
- MyProject1
- OSB Configuration - MyProject1
5) Drag CommonArtifacts and MyProject1 into the OSBConfguration - MyProject1 (while in OSB Perspective)
6) Switch to workspace_MyProject2
Repeat the import & drag steps
The caveat to this is that you can only work on 1 "MyProject#" at a time and you need to switch between Eclipse/OEPE workspaces to go back and forth. But the underlying assets within those projects are still in a single location on the file system.
Cheers,
Michael

Trouble Sharing Project as AVI

Similar Messages

Maybe you are looking for