Trouble shooting WMP with Tiger?

Hi;
Does anyone know why WMP can't be launched after installation of Tiger? Or at least it will take good ammount of time before it can start.
Thanks,

for some reason or another, there is a huge difference between os 10.3 and 10.4. nearly every program that was compatible with os 10.3 had to be updated for tiger. while nearly every software maker who had problems in 10.4 has fixed their applets, Microsoft won't be. sorry to have to tell you this, but Windows Media Player is no longer a good program for Mac! the best program out there so far is VLC (which supports a range of files and codecs, including windows media files!) I think it was recently updated for os 10.4, but not fully sure. you can download it from Download.com. hope this helps!

Similar Messages

TS1702 My garage band app has crashed & keeps returning to the main screen when I try to open it... I've tried most of the trouble shooting options with the exception of re-installing the app, because I fear I will lose a number of recent projects I have

My garage band app has crashed & keeps returning to the main screen when I try to open it... I've tried most of the trouble shooting chart (no updates available, tried restarting app, restarted device) all I have left is to re-install the app... My main fear is that if I do this I will lose a load of recent projects that are saved to the app that I've spent the last few days creating... Help...

I have tried all those things I even updated the software to the new iOS system and it still did fix my problem.
What happened is that my garage band looks like it will open then it shuts down.
I have lot of important things on my garage band and I'm afraid that if I uninstall it deleting it then reinstalling it all my work on it will be gone and I can't have that happen.
Everyday I am hoping that when i go to open the app that is will work but it doesn't it gets ready to turn on then it shuts off , the app doesn't even open all the way and turns off.
I really hope I don't have to erase it.
It'll say it's ,lading my songs then it shuts down .
If I waited for the App Store to come up with an update for garage band should I wait till then to update my app so it doesn't get damaged . I don't want to erase it and all my data get erased . I figured if I wait for an update then my garage band will reset itself but won't delete my data. I'm not sure if that will help. Is there anything you or anyone else might know that can help me with this matter ?
Thank you
Simachyahi

Problem launching WMP with Tiger??

HI;
I have problems launching WMP after installing Tiger on my Ibook!
I have tried re-installing WMP but that doesnt help.
Can anyone please tell me how to solve this issue?

Said,
I noticed that you've posted this topic numerous times. Did you ever try iFelix's suggestion listed here?
iFelix, "any new WMP for Mac users?" #14, 06:52pm Aug 20, 2005 CDT
Brian

Hey i have a normal i phone 4 and have just done all the iTunes, macbook and iphone updates and i can not get the devices thing to come up in the tab on the left in iTunes. and i have done that itunes trouble shooting thing with no luck.. plz help

i just cant get the devices thing to come up in the tab on the left. i am pretty sure everything is up to date and the phone is charging through the mac book usb port. i have also tried this link http://support.apple.com/kb/TS1591 that all the google searches take me to but it no help. i am not very good with computers so spastic easy language would be greatly appreciated, thanks in advance

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

Trouble Shooting help with broken system

See sig for system.
Today I was just sitting there enjoying myself and decided to run diskeeper on my D:
PATA drive when pop went the weasel. The computer won't boot to windows.
All the info the BIOS gives me looks good ie the sata and pata controllers are functioning as is the lone IDE drive.
I looked at the board and one of the sata ports is pulled slightly away from the board
yet the drive is recognized on it as it is on the other.
I have another PS that I will try tonight or tomorrow but was looking for some troubleshooting expertise.
Other info: Hangs for a spell when loading atapi.sys
Won't boot my other OS 64 bit XP which was hidden when the error happened
Any Advice? No way to test the SATA drive
Thanks
Ahumado

Quote from: Hans on 11-August-06, 02:17:32
As long as you don't re-initialize the PATA-RAID, nothing will go wrong. Simply keep an eye on any messages that warn you about data-loss.
I read the manual and it states I may lose data but probably not. Ok if I delete the array where does the data go? Drive 1 or Drive 2 or ? and can I access it by merely hooking the drive(s) to IDE? I have a ton of data and I can move it and back it up but if I don't have to I don't want to.
Or is that the only way to go. Once arrayed always arrayed? As you can see I'm confused and need some spoon fed hand holding or the like.
Thanks
Ahumado

I plug my iPhone 3gs into my laptop and it no longer syncs with my iTunes. Ive tried all the trouble shooting methods and nothing works. My iPhone doesnt appear on iTunes or under "my computer." Does anyone know how to fix this?

I plug my iphone 3gs into my laptop and it no longer syncs with my iTunes. I've tried all the trouble shooting methods and nothing works. My iPhone doesn't appear on iTunes or under "My Computer." Does anyone know how to fix this?

If AMDS is running, you are using a USB port directly on the computer and not a hub, you have disconnected other USB devices except keyboard and mouse, you have completely uninstalled and reinstalled iTunes as described in http://support.apple.com/kb/HT1925, You have tried cleaning the connector on the bottom of the phone, you have tried a different cable, you have installed the latest USB drivers for your computer, you have disabled your antivirus and firewall, you are running as an Administrator account and you have tried creating a new user on your computer and connected when logged in as that user then you have exhausted my knowledge. The only other thing to try is a different computer. If it isn't recognized on a different computer you have a hardware problem. Good luck!

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

Trouble-shooting no sound through the right side of Apple earphones with remote...

Hope this story of trouble-shooting this problem helps someone in the future.
For some strange reason, when I listened to a podcast using the Music app through the Apple earphones with remote on my iPhone 4, the right side has no sound. However, when I pull the earphone plug out one notch, I get sound from both sides, but the remote controls no longer work. At that point, I was sure I had a hardware problem, but where it lay-- earphones or iPhone 4, I didn't know.
1. For my first step, I tried the earphones with another iPhone 4, and got the exact same results. That convinced me that it was a problem with the earphones, but then I tried them on our iPad and they worked fine!
2. That ruled out the earphones and got me wondering if both iPhone 4's earphone jacks were flakey or misbehaving. I had read about the old fuzz in the jack problem, so I used an air blower to clean it out, but it made no difference. I still figured that maybe both jacks were stressed in some way, although two of them?
3. Then I read that some people found different apps worked--and even specifically that running Skype could solve things. That didn't work. However, it led me to try various streaming apps (e.g., Portal to the Universe, NPR) and everything was fine-- sound from both sides and remote controls fully functional.
At that point, I was convinced there was something odd going on with the Music app.
4. Finally, it occurred to me to try other podcasts-- and even other episodes of the particular podcast. They all worked fine.
So, it ended up being one particular podcast-- and, while I still do not know why, it means that the earphones, the headphone jack, the iPhones are all in fine shape! Yay!
In any event, the bottom-line is that it's really smart to consider *all* the variables that could be affecting the situation--especially the most obvious ones that you wouldn't even think about it. As it turned out, in my case, I had tested the very same podcast on both iPhones, so no wonder I got the very same results!

I think you're right-- however, I always thought that mono recordings played through both ears--always worked that way on my old stereo system!
This podcast does that, too, but only if one pulls the plug out a bit! That's what's confusing to me. Why does it change from both ears to only one ear depending on far the plug is pushed in? (And especially as it behaves opposite what one would expect-- both ears when not plugged in all the way-- only 1 when fully embedded!)

PS Elements 10 suddenly incompatible with Windows 7. Cannot open. Windows 7 not even an option on the incompatibility trouble shooter.

Adobe tech people. How do i get the PS version I have been happily using to open again Suddenly it will not open and W7 is not even listed as an OS when I run the compatability trouble shooter. Is this Adobe's way of making me another version? VERY ANGRY.

I had the same problem with my Satellite A505-S6005. I keep everything on external drives/remote backup and ISO my installations because of problems with the CD/DVD on my previous laptop, so I thought turning this off would be handy. Unfortunately, it also turned off virtual drives. Unlike you, I had an error code 52.
The upper/lower filters is what finally worked for me, but I had uninstalled the Eco Utility just prior to that, thinking that is where the power setting was initiated. I'd had an icon in my tray indicating that ODD power was off but with no option to turn it back on. Removing Eco removed that icon, but still no drive until I did the regedit. Do you have this utility? From what I've seen, the Protege has Easy Guard, which seems similar to Eco. Maybe a conflict exists with that?

The file is not compatible with this version of photoshop / CS2 error -- Same File : CS6 no error / CS2 error , I need trouble shooting method, Please

the file is not compatible with this version of photoshop / CS2 error -- Same File : CS6 no error / CS2 error , I need trouble shooting method, Please

Save with Maximize Compatibility in CS6.
Choose Edit > Preferences > File Handling (Windows) or Photoshop > Preferences > File Handling (Mac OS).
From the Maximize PSD and PSB File Compatibility menu, choose any of the following:
Always
Then re-save your file so it can open in CS2

I have been trying to open itunes that has already been installed. But, the thing is it never opens and when i do right click and trouble shoot also, it doesnt open. I dont whats wrong with itunes and my comp is 64 bit windows 7. Can somebody please help

I have been trying to open itunes that has already been installed. But, the thing is it never opens and when i do right click and trouble shoot also, it doesnt open. I dont whats wrong with itunes and my comp is 64 bit windows 7. Can somebody please help

no its 64 bit version of itunes. Can you please help me. I am not able to sync my iphone.

TS1702 WHY EVERYTIME APPLE PUTS OUT A NEW VERSION OF IBOOKS DOES IT CRASH HAPPENED LAST TIME AND NOW WITH V6 i HAVE DONE EVERYTHING IN THE TROUBLE SHOOTING GUIDE LIKE SIX TIMES AND IT STILL WONT LOAD MY BLOODY BOOKS

Why does ibooks crash everytime there is an update? I am so sick to death of having to stuff around and do all the trouble shooting rubbish to try and get ibooks working again, everytime there is an up date. I have wiped restored re synced changed usb leads turned my computer off unplugged and replugged every bloody thing about a dozen times and still after a week, instead of reading my books I have a very expensive paperweight. What is the problem and why does this keep happening with every new update. I am so frustrated and annoyed that I can't just read my book, it is why I bought the **** thing. Anybody got any other ideas before I go insane?

Dude thank-you for your wonder detailed knowldge, I have descovered that lets say xp 1700 in a ultra 2 can only handle at the most 143fsb mult at 12.
Given the settings" irq's are a major",part of directing traffic and power? example:
Sound blaster Live , uses two irq's most common at"Auto" is, irq 10, or 5, and Sound blaster 16 emulation usually takes irq 5,. I have found that the sound card in slot3 works great , but to do this I had to change the Bio's and assign slot 3 irq 7 . and make sure printer port has share irq enabled
Problems that accure with bad traffic are like this. Start a dedicated server. minimize than start your game?":censored: no sound what could be wrong"? Shoot another problem Connection problem?. The computer nerd is getting trouble over the ordeal. ANSWER! IRQ can fix the problem, Study the irq and make changes as you go. "what would it be like with no stop signs,,,that is the same as a irq. with the same knowldge this topic brings IRQ need to be clearly understood.
I can honestly say my system is error free and running like a dream.
xp 2500 barton 333
creative sound 5.1gamers.
512 mb kingston ram 400 mhz
boadband either onboard.
MSI 5700 128 mb ddr
Setting are:
163 fsb
mult of 11
ddr 333
video memory clock down to 450mhz
3d clock to 390mhz
The delta is a smooth running board also I want to mention to the person with crackling sounds, change the irq like I did, that fix the problem and the power is totaly too good to be true.

HT1772 I have an iBook with Dual USB that won't fully turn on. it flashes a "?" and the Mac face symbol in a folder i the middle of the screen. How can I trouble shoot?

I have an iBook with Dual USB that won't fully turn on. it flashes a "?" and the Mac face symbol in a folder i the middle of the screen. How can I trouble shoot?

Restart with the Option key held down and see if the internal drive appears.
If it does, click on it, press Enter, and then change the setting in the Startup Disk pane of System Preferences or the Startup Disk control panel.
If it doesn't, insert a Mac OS install CD or DVD and use the Disk Utility or Disk First Aid to repair the internal drive. If there aren't any problems, install an OS onto it.
(86157)

Kisight: How do I get my iSight working ? Trouble Shooting an iSight Camera. (Version 3)

Replacement for the second draft of this Thread   (To be removed if Published as Tip)
kisight: How do I get my iSight working ?
Trouble Shooting an iSight Camera. (Version 3)
Hi,     On many subjects Apple has Articles and Documents that can help.
In some case they are written by an Engineer or similar and can miss the mark for the average user.
In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
It lists steps and processes to go through for both Internal iSights and External ones.
However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ? which were written several years ago and predate the Apple Article, being aimed at the External iSight. They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
External First. For Internal iSights Start at 2b) (you will need to adjust some options/steps as the Internal is USB)
Steps
1) Pre Purchase
If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
2) Does it work ?
a) First of all Plug it in. It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
It will then go through some checks as the OS powers it up and checks it's firmware.
Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
There is no ON switch as such. It does have an iris mechanism that can be controlled by the User. The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
See this Users Tip for more applications Or this page for yet more.
Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
3) If it does Not Work
a) Check Cables/leads. Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
Try another 6 pin to 6 pin firewire cable.
b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing. (Also see d below if you have an 800 FIreWIre Computer)
c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire. (Use USB for Internal Cameras)
If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point. This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
Other Items
Audio.
The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
Firmware.
The System Profiler as detailed above should tell you the Firmware the iSight has. The current version is 1.0.3 and was updated in Panther. (Essentially it is an Audio compatibility update but does seem to help in other situations)
If your computer is running Panther (10.2.x) then use this Updater
If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
If an iSight is Plugged in on the Computer when you do an OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
Focusing on the External iSight
Essentially the External iSight is self or Autofocusing.
If in doubt then try better lighting and strong colours as opposes to light or pastels.
(All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
EZ Jim has these more specific recommendations for piece of mind.
Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
This Users Tip by Ian Bickerstaff can give you clues for any application really "Look and sound good in iChat"
Other Info and Links
iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
Apple's iSight Firewire Connectivity FAQs
Apple's iSight Service FAQs
If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
1:13 PM      Saturday; October 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Replacement for the second draft of this Thread   (To be removed if Published as Tip)
kisight: How do I get my iSight working ?
Trouble Shooting an iSight Camera. (Version 3)
Hi,     On many subjects Apple has Articles and Documents that can help.
In some case they are written by an Engineer or similar and can miss the mark for the average user.
In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
It lists steps and processes to go through for both Internal iSights and External ones.
However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ? which were written several years ago and predate the Apple Article, being aimed at the External iSight. They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
External First. For Internal iSights Start at 2b) (you will need to adjust some options/steps as the Internal is USB)
Steps
1) Pre Purchase
If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
2) Does it work ?
a) First of all Plug it in. It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
It will then go through some checks as the OS powers it up and checks it's firmware.
Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
There is no ON switch as such. It does have an iris mechanism that can be controlled by the User. The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
See this Users Tip for more applications Or this page for yet more.
Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
3) If it does Not Work
a) Check Cables/leads. Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
Try another 6 pin to 6 pin firewire cable.
b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing. (Also see d below if you have an 800 FIreWIre Computer)
c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire. (Use USB for Internal Cameras)
If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point. This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
Other Items
Audio.
The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
Firmware.
The System Profiler as detailed above should tell you the Firmware the iSight has. The current version is 1.0.3 and was updated in Panther. (Essentially it is an Audio compatibility update but does seem to help in other situations)
If your computer is running Panther (10.2.x) then use this Updater
If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
If an iSight is Plugged in on the Computer when you do an OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
Focusing on the External iSight
Essentially the External iSight is self or Autofocusing.
If in doubt then try better lighting and strong colours as opposes to light or pastels.
(All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
EZ Jim has these more specific recommendations for piece of mind.
Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
This Users Tip by Ian Bickerstaff can give you clues for any application really "Look and sound good in iChat"
Other Info and Links
iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
Apple's iSight Firewire Connectivity FAQs
Apple's iSight Service FAQs
If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
1:13 PM      Saturday; October 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to install Windows 7 on MacBook with Tiger + Leopard upgrade using Boot Camp

Hi,
I've had Vista installed on a separate partition on my MacBook for a while, but wanted to upgrade to Windows 7. I've completely wiped the HDD, re-installed Tiger, upgraded to Leopard and installed Windows 7 using boot camp from within OSX. However, I now can't boot back into OSX - I believe it's because I don't have the latest version of Boot Camp within Windows 7 (it doesn't appear on the task bar), but I also don't have a full copy of Leopard, only the upgrade disk.
Is there any way to (a) boot back into OSX (I've tried holding down the option key and this doesn't work) and (b) installing a version of Boot Camp that will enable me to switch between both operating systems as I was when Vista was installed & without having to purchase the full copy of Leopard?
Any assistance would be much appreciated.
Many thanks,
Elliot.

Try to boot from the 10.4 disk then and "Repair Disk". If you can, then try booting from the 10.5 disk and do the same.
Have you tried holding down the C key also when trying to boot from the Install disks? It could take 30 seconds to a minute or more for the C key/Option key reboots. The Mac DVD HAS to be the OS installer disk not the applications installer, etc,. Sorry if I keep bringing this up.
You have to keep holding it down the whole time it boots, either it will bypass it and reboot into Windows or it should get to the boot loader window with at least Windows showing up.
If you can still boot into Windows with no problems then Windows SHOULD show up in the boot loader window. (C key/Option key) It's hardware related, it's the computers manual way of looking for a bootable OS if there's no OS installed yet.
Don't forget to disconnect any USB devices until you get it fixed.
Also try to boot from the Windows installer disk and "Repair Windows" and see what happens.
Other then your DVD drive may be on it's last legs, I can't really think of any reason you can't boot from the Mac DVD's. All the other post's I searched for eventually got the DVD boot working, even 10.6 and 10.7 are having that issue, tho rarely.
elliotfromnewark wrote:
Hi, ...........inserting the Leopard disk once in Windows to install boot camp and it says that the version on the DVD is only compatible with XP SP2 or Vista.................
Don't run the installer this time, if a window pops up to "Run" or "Open", just open it. If it doesn't open the DVD and look for the BootCamp.exe. Right click on the .exe (or whatever it's called) and select the trouble shoot compatibility mode and select Vista. Yes, I know you have W7. See if that works.
It may have buggered the Mac OS side so you may have to get DiskWarrior (worked for some) or the like in order to fix it. It would definitely be useful in the future.

Trouble shooting WMP with Tiger?

Similar Messages

Maybe you are looking for