Trouble using configuration assistant

ora10g-r2, xp
whenever i try setting up a database using the configuration assistant i get the following error messages:
ORA-24324
ORA-24323
ORA-03113
being new to oracledb i have no clue what is causing this. help is appreciated.

Comment out the below line in your $ORACLE_HOME/network/admin/sqlnet.ora file. This is as per Metalink Note:365046.1(step 3 of solution) what's being installed is different but the error has the same error messages and solution I think.
#SQLNET.AUTHENTICATION_SERVICES = (NTS)

Similar Messages

I'm having trouble using migration assistant to get data from a windows pc over to a macbook pro mavericks. It can't resolve finding the sources wirelessly.

I have installed migration assistant on the pc. I am running it as administrator. It says waiting to connect to Mac. I am running MS on the macbook pro (brand new) and it found the machine but keeps saying looking for other sources and I can't move ahead. Any ideas?

Resolved. Someone told me verbally what to do.

WF Configuration assistant Error (Table or view does not exist)

Hi
I'm trying to configure a fresh owf_mgr schema on my new 11gr2 database using configuration assistant 2.6.4.0.0.
The assistant connects but is not able to continue. The error is: java.sql.SQLException: ORA-00942: table or view does not exist.
I don't find anything useful in the log file though.
I previously did the same thing on a 11gr2 db and it went all nice and good.
Any ideas what table or view does the wizard mean?
Thank you in advance.

Hi
I'm trying to configure a fresh owf_mgr schema on my new 11gr2 database using configuration assistant 2.6.4.0.0.
The assistant connects but is not able to continue. The error is: java.sql.SQLException: ORA-00942: table or view does not exist.
I don't find anything useful in the log file though.
I previously did the same thing on a 11gr2 db and it went all nice and good.
Any ideas what table or view does the wizard mean?
Thank you in advance.

I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network. The connection was interrupted and the time was over 24 hours. Is there a better way to do this? I'm using Migration assistant.

I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network. The connection was interrupted and the time was over 24 hours. Is there a better way to do this? I'm using Migration assistant. The lack of an ethernet port on MacBook air does not help.

William ..
Alternative data transfer methods suggested here > OS X: How to migrate data from another Mac using Mavericks

Problem using template in database configuration assistant Oracle 10g

Hi,
I created a database using the database configuration assistant for Oracle 10g on a Windows Server 2003 box. The database I created worked perfectly, and I had saved it as a template so I could save some time when creating similar databases (which I have to do on occasion)
When I try to use the template though, I get an error (at about 4% through the database creation) saying:
ORA-01501: CREATE DATABASE failed
ORA-09314: sltln: error translating logical name
I'm creating this new database on the same server as the one I created my previous database on and NOTHING has changed on it, I did this just minutes apart and can duplicate it at will (just try and use a template)
Heres the template file contents (KM1.dbt)
<DatabaseTemplate name="KM1" description="" version="10.1.0.2.0">
<CommonAttributes>
<option name="ISEARCH" value="false"/>
<option name="OMS" value="false"/>
<option name="JSERVER" value="false"/>
<option name="SPATIAL" value="false"/>
<option name="ODM" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="IMEDIA" value="false"/>
<option name="XDB_PROTOCOLS" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="ORACLE_TEXT" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="SAMPLE_SCHEMA" value="false"/>
<option name="CWMLITE" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="EM_REPOSITORY" value="true">
<tablespace id="SYSAUX"/>
</option>
</CommonAttributes>
<Variables/>
<CustomScripts Execute="false"/>
<InitParamAttributes>
<InitParams>
<initParam name="O7_DICTIONARY_ACCESSIBILITY" value="TRUE"/>
<initParam name="background_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\bdump"/>
<initParam name="compatible" value="10.1.0.2.0"/>
<initParam name="core_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\cdump"/>
<initParam name="db_block_size" value="8" unit="KB"/>
<initParam name="db_cache_size" value="24" unit="MB"/>
<initParam name="db_create_file_dest" value="E:\oradata"/>
<initParam name="db_create_online_log_dest_1" value="C:\Oradata"/>
<initParam name="db_create_online_log_dest_2" value="D:\Oradata"/>
<initParam name="db_create_online_log_dest_3" value="E:\Oradata"/>
<initParam name="db_domain" value="JACOBSONCO.COM"/>
<initParam name="db_file_multiblock_read_count" value="16"/>
<initParam name="db_name" value="UDC7"/>
<initParam name="db_recovery_file_dest" value="E:\UDC7\flash_recovery_area"/>
<initParam name="db_recovery_file_dest_size" value="2048" unit="MB"/>
<initParam name="java_pool_size" value="0" unit="MB"/>
<initParam name="job_queue_processes" value="10"/>
<initParam name="large_pool_size" value="8" unit="MB"/>
<initParam name="open_cursors" value="1000"/>
<initParam name="pga_aggregate_target" value="24" unit="MB"/>
<initParam name="processes" value="150"/>
<initParam name="remote_login_passwordfile" value="EXCLUSIVE"/>
<initParam name="shared_pool_size" value="80" unit="MB"/>
<initParam name="sort_area_size" value="65536"/>
<initParam name="undo_management" value="AUTO"/>
<initParam name="undo_tablespace" value="UNDOTBS1"/>
<initParam name="user_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\udump"/>
</InitParams>
<MiscParams>
<databaseType>MULTIPURPOSE</databaseType>
<maxUserConn>20</maxUserConn>
<percentageMemTOSGA>40</percentageMemTOSGA>
<customSGA>true</customSGA>
<characterSet>WE8MSWIN1252</characterSet>
<nationalCharacterSet>AL16UTF16</nationalCharacterSet>
<archiveLogMode>false</archiveLogMode>
<initParamFileName>{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\pfile\init.ora</initParamFileName>
</MiscParams>
<SPfile useSPFile="true">{ORACLE_HOME}\database\spfile{SID}.ora</SPfile>
</InitParamAttributes>
<StorageAttributes>
<ControlfileAttributes id="Controlfile">
<maxDatafiles>100</maxDatafiles>
<maxLogfiles>16</maxLogfiles>
<maxLogMembers>3</maxLogMembers>
<maxLogHistory>1</maxLogHistory>
<maxInstances>8</maxInstances>
<image name="<OMF_CONTROL_0>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
<image name="<OMF_CONTROL_1>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
<image name="<OMF_CONTROL_2>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</ControlfileAttributes>
<DatafileAttributes id="<OMF_SNIKEB_DATAFILE_0>">
<tablespace>SNIKEB</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">300</size>
<reuse>false</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">-2</increment>
<maxSize unit="KB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
<tablespace>SYSAUX</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">120</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
<tablespace>SYSTEM</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">300</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
<tablespace>TEMP</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">20</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">640</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
<tablespace>UNDOTBS1</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">200</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">5120</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_USERS_DATAFILE_0>">
<tablespace>USER_DATA</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">5</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">1280</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<TablespaceAttributes id="SNIKEB">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">-1</initSize>
<increment unit="KB">-1</increment>
<incrementPercent>-1</incrementPercent>
<minExtends>-1</minExtends>
<maxExtends>-2</maxExtends>
<minExtendsSize unit="KB">-1</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SNIKEB_DATAFILE_0>">
<id>1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSAUX">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSTEM">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>3</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>-1</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="TEMP">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>true</temporary>
<defaultTemp>true</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>0</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="UNDOTBS1">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>true</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">512</initSize>
<increment unit="KB">512</increment>
<incrementPercent>50</incrementPercent>
<minExtends>8</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">512</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="USER_DATA">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">128</initSize>
<increment unit="KB">128</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">128</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_USERS_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<RedoLogGroupAttributes id="1">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_1_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="2">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_2_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="3">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_3_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
</StorageAttributes>
</DatabaseTemplate>
can anyone explain why I keep getting this error?
Thanks

Error:     ORA-9314
Text:     sltln: error translating logical name
Cause:     Internal buffer may have overflowed
Action:     See OSD error accompanying this message
Check alertlog and trace files.
Message was edited by:
FeNiCrC_Neil

Using Database Configuration Assistant

hi
i m using Database Configuration Assistant in Windows2000....when i try to create a new template using the structure of a current running database(ORCL)...i m having a problem....it asks for a DBA usernam,e and password and Service name to connect to the database which structure is to be used for creating a database template ....i have service name ORCL....and it is working whn i try to conect using SQLPLUS...but when i use this service ORCL to connect here i receive error
VBD-2000 SERVICE ALIAS COULD NOT BE RESOLVED
why i m receiving this error???
Regards

Ensure that service is registered in the listener.ora file, reload the listener and ensure that service is an entry of the tnsnames.ora file.
Joel Pérez
http://otn.oracle.com/experts

Error when using OID configuration assistant

Hi all !
I meet a problem of configuration with OID.
When using OID configuration assistant, and after modifying super user password page, the OID stops, and i get on the console, the error : " Configuration Exception, error number 16".
I have done this operation a second time, and the error is now 5.
I don't know what these errors means, and where i can find a solution, or an explication, do you know where ??
thanks you very much !
SB

Hi all !
I meet a problem of configuration with OID.
When using OID configuration assistant, and after modifying super user password page, the OID stops, and i get on the console, the error : " Configuration Exception, error number 16".
I have done this operation a second time, and the error is now 5.
I don't know what these errors means, and where i can find a solution, or an explication, do you know where ??
thanks you very much !
SB

ORA-12514 Error when using Net Configuration Assistant

I have recently installed Oracle 11g on a Windows 2008 server and am now trying to connect via the Oracle client on my local machine.
Here is how I've been using Net Configuration Assistant so far:
Listener Configuration
The name of my listener is LISTENER_PROXIMA (proxima is the name of the server). Does this need to be named something else? Something specific?
I'm using TCP to connect.
I'm using standard port 1521.
Naming Methods
Local Naming and Easy Connect Naming
Local Net Service Name
Service name is ADMI04 (checked this against the lsnrstl service status on the server and it's correct)
Using TCP
Using the hostname proxima.domain-name.com
I'm attempting to connect as SYS (but have tried others with the same result)
When I go to test the connection I keep getting the ORA-12514 error. Does anyone know what I should do? Reinstall the listener? If so, are there any suggestions or guidance for that?
Thank you.

=================================
A couple of important points.
First, the listener is a server side only process. It's entire purpose in life is to receive requests for connections to databases and set up those connections. Once the connection is established, the listener is out of the picture. It creates the connection. It doesn't sustain the connection. One listener, with the default name of LISTENER, running from one oracle home, listening on a single port, will serve multiple database instances of multiple versions running from multiple homes. It is an unnecessary complexity to try to have multiple listeners or to name the listener as if it belongs to a particular database. That would be like the telephone company building a separate switchboard for each customer.
Second, the tnsnames.ora file is a client side issue. It's purpose is for address resolution - the tns equivalent of the 'hosts' file further down the network stack. The only reason it exists on a host machine is because that machine can also run client processes.
Assume you have the following in your tnsnames.ora:
larry =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = curley)
)Now, when you issue a connect, say like this:
$> sqlplus scott/tiger@larrytns will look in your tnsnames.ora for an entry called 'larry'. Next, tns sends a request to (PORT = 1521) on (HOST = myhost) using (PROTOCOL = TCP), asking for a connection to (SERVICE_NAME = curley).
Where is (HOST = myhost) on the network? When the request gets passed from tns to the next layer in the network stack, the name 'myhost' will get resolved to an IP address, either via a local 'hosts' file, via DNS, or possibly other less used mechanisms. You can also hard-code the ip address (HOST = 123.456.789.101) in the tnsnames.ora.
Next, the request arrives at port 1521 on myhost. Hopefully, there is a listener on myhost configured to listen on port 1521, and that listener knows about SERVICE_NAME = curley. If so, you'll be connected.
What can go wrong?
First, there may not be an entry for 'larry' in your tnsnames. In that case you get "ORA-12154: TNS:could not resolve the connect identifier specified" No need to go looking for a problem on the host, with the listener, etc. If you can't place a telephone call because you don't know the number (can't find your telephone directory (tnsnames.ora) or can't find the party you are looking for listed in it (no entry for larry)) you don't look for problems at the telephone switchboard.
Maybe the entry for larry was found, but myhost couldn't be resolved to an IP address (say there was no entry for myhost in the local hosts file). This will result in "ORA-12545: Connect failed because target host or object does not exist"
Maybe there was an entry for myserver in the local hosts file, but it specified a bad IP address. This will result in "ORA-12545: Connect failed because target host or object does not exist"
Maybe the IP was good, but there is no listener running: "ORA-12541: TNS:no listener"
Maybe the IP was good, there is a listener at myhost, but it is listening on a different port. "ORA-12560: TNS:protocol adapter error"
Maybe the IP was good, there is a listener at myhost, it is listening on the specified port, but doesn't know about SERVICE_NAME = curley. "ORA-12514: TNS:listener does not currently know of service requested in connect descriptor"
=====================================

Configure SG500X using Cisco Configuration Assistant (CCA)

Hi,
I have a couple of SG500X Switches which need to be configured and I wanted to do this with a central managed tool to have an uncomplicated way to configure the switches.
I already found Cisco Configuration Assistant, which supports the 200 and 300 Series but does not seem to support 500 Series. Also I found the Cisco Network Assistant which only supports Catalyst Switches.
Is there a tool which can be used to centrally configure and manage SG500X switches?
Thanks in advance,
Christoph

push
Is there really no tool for the 500 Series?
Seems strange to me, as 300 and lower have the CCA and Catalyst have CNA, only the 500 don't have any tool.

Error when creating data base using Database Configuration Assistant

Hi!
I have installed Oracle 9i release 2 in Windows Xp, I want to create a db from the Database Configuration Assistant but they appear the following errors:
ORA 01034
ORA 01501
ORA1109
I press the button to ignore but they continue appearing.. when the process arrives the 12% they stopped.... When i installed the Oracle appeared a pair of errors but when i press the Ignore button the process continued and finish satisfactorily....
Any Suggestion???
Thanks...
Tere Blanco

Oracle error description
ORA-01034 ORACLE not available
Cause: Oracle was not started.
Possible causes include the following:
1) The SGA requires more space than was allocated for it.
2) The operating-system variable pointing to the instance is improperly defined.
Action: Refer to accompanying messages for possible causes and correct the problem mentioned in the other messages. If Oracle has been initialized, then on some operating systems, verify that Oracle was linked correctly. See the platform-specific Oracle documentation.
-aijaz

I am using Pattern matching using vision assistant . its able to detect the temple which created while configuration

Hi all ,
i am using vision assistant to do patten matching . its able to find the pattern with created template in vision assistant .
if i load some other pattern is not detecting ..
i have attached my vi file
Attachments:
PM_light.vi ‏266 KB

Hi all ,
i am using vision assistant to do patten matching . its able to find the pattern with created template in vision assistant .
if i load some other pattern is not detecting ..
i have attached my vi file
Attachments:
PM_light.vi ‏266 KB

TS4062 After using Setup Assistant, devices no longer appear in iTunes for Wifi Sync

I'm trying to fix an issue that is the result of a bug I disovered, and I'm out of ideas to troubleshoot. I'm hoping you guys will have some more suggestions, perhaps deleting plists or somehow resetting iTunes device syncing so I can start over.
The bug:
Using Setup Assistant to transfer data over from my other parition which had iTunes configured to sync my devices causes the new partition's iTunes to NOT show devices in iTunes. When I plug my device in, the option to sync over Wifi is still enabled, but unplugging it still doesn't keep the device displayed in iTunes. Unchecking Wifi sync, clicking Apply, checking, clicking Apply and disconnecting results in the same problem - device disappears from iTunes. But if you go to Settings > General > iTunes Wi-Fi Sync, the Sync Now button is not grayed out. Clicking it starts the sync, but it never gets past the "Looking for iMac" stage.
I'm in the process of filing this bug with Apple, but I want to include the steps I've followed to fix the issue so they know.
What I've attempted so far (in this order):
Quitting and relaunching iTunes
Restarted my iPad
Then forcing a sync on the iPad via Settings is the same result, endlessly looking for the iMac
So then I opened AirPort Utility, clicked my Time Capsule, then clicked Base Station > Restart. After the Time Capsule restarted and the Wifi was working again, I checked back in iTunes to see if the iPad showed up - it didn't.
So then I turned off Wifi on the iPad, Quit and relaunched iTunes, then enabled Wifi on the iPad and it still didn't appear.
Note that the exact same thing is happening with my iPhone.
iTunes 11.0.2
OS X 10.8.3
iOS 6.1.3
Thanks guys!

Not even deleting plists, essentially resetting iTunes, solved the problem.
In case anyone has troubles with this and none of the troubleshooting steps worked, here is your last resort, which finally solved the problem for me.
Use Terminal to delete iTunes:
cd /Applications/
sudo rm -rf iTunes.app/
Download and install iTunes
The iOS devices magically appear in iTunes, without needing to plug in via USB to enable Wifi sync.

Problem during installation oracle database configuration assistant FAILED

Hi Dear,
The Configurations are :
VM OS : Oracle enterprise linux 5
Trying to install : Oracle 11g R1
I'm having a real problem , so i can't continue my installation during the configuration assistant, oracle net configuration assistant was succeeded but oracle database configuration assistant FAILED
Here is the long message showed by console :
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/11.1.0/db_1/bin/netca /orahome /u01/app/oracle/product/11.1.0/db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /u01/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = /u01/app/oracle/product/11.1.0/db_1
Parameter "orahnam" = OraDb11g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = /u01/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
Listener started at port:1521
Oracle Net Listener Startup:
Running Listener Control:
/u01/app/oracle/product/11.1.0/db_1/bin/lsnrctl start LISTENER
Listener Control complete.
Listener started successfully.
Listener configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Configuration assistant "Oracle Net Configuration Assistant" succeeded
Output generated from configuration assistant "Oracle Database Configuration Assistant":
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant":
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 2):
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 3):
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
Please help me it's urgently

Please help me i can't find any solution to resolve this trouble
Should i uninstall this version or what exactly, could you please suggest to me something like another release who matches that configuration
Sorry but i have no idea
Waiting for the response

Using migration assistant from HDD only to SSD+HDD?

Hi,
Usually, when buying a new mac and starting it for the first time, I use the migration assistant to get everything (software, settings, data...) from my time capsule backup.
I am currently using an iMac 24'' which only has a "standard" HDD. I am however thinking about upgrading to the latest iMacs, potentially with the "SSD+HDD" option.
The description on the "Configure" page of the online store says : "If you configure your iMac with both the solid-state drive and a Serial ATA hard drive, it will come preformatted with Mac OS X and all your applications on the solid-state drive. Then you can use the hard drive for videos, photos, and other files."
My question is therefore the following : would the migration assistant be "smart enough" to place my OS and applications on the SSD drive, and the rest of my files ("videos, photos, and other files.") on the HDD?
Thanks in advance!

I had the same issue some time ago: I added a 32 gb SSD to my mac running leopard. Then wanted to use install Snow Leopard and use migration assistant to restore the sytem with Snow leopard and applications on the SSD, and the user folders on the old 250gb HD. Turns out this isn't possible. Manually accessing your time machine or other backup up to restore files by hand is a pain. Just installing Snow Leopard and pointing the user folder to the Leopard user folder on the HD creates problems too, just as pointing it to a newly created folder.
Solution:
-Backup your old system with time machine to an external disk
-Note: make sure you don't mix up SSD and HD in this manual.
-Install SSD (If this means you no longer have a cd drive, use a copy of snow leopard on an external drive).
-BE SURE YOUR OLD SYSTEM IS BACKED UP WITH TIME MACHINE.
-Then install OS X TWICE: once on the old HD and once the SSD. Wipe your HD with Disk Utility before install.
-Start up OS X on the HD, use the option key at startup if necessery to select the right disk.
-Use migration assistant to restore from the time machine backup. Now you have a fresh install of OS X, with your user files and applications intact.
-Now startup OS X on the SSD.
-Make the SSD startup disk in system preferences -> Startup disk.
-Go to System preferences -> Users. Unlock. Create an extra user, so you end up with a spare user account, and one you will actually use. Now right click on the user account thats going to be used, and select your user folder on the HD that you just restored with Migration assistant. Just leave the spare one. It is for emergencies and also disk failures: OS X is designed to have user and system files on the same disk, so you should always have one user account sticking those rules.
-Restart OS X on the SSD as asked.
-Now all thats left to do is migrate applications from the HD application folder to the SSD application folder by simply copy/pasting. This is trial and error, but in my case 90% of the applications gave no trouble at all. The ones that did are library based media applications like Aperture. All I needed to do is go to their preferences and point them to their old libraries on the HD. MS Office was the only application that needed full reinstalling. The applications that ship with the OS don't need to be migrated of course since they are already there on the SSD.
-Point your dock icons to the right folders (on the HD) and applications (on the SSD)
-Make a new time machine backup
-Last step, optional: clean up the HD. You don't need the system folder that is still there, but I chose to keep it for a while as a backup. I left the library in place there too, since I don't know which applications still use it, but in time I will clean it up too.
And one more thing: Since Migration assistant doesnt' just copy files, but also seams to adapt application databases of Apple apps to work with a newer version of an application coming with a new OS, such as Mail, Safari, iCal and Address Book, this is probably going to be the best way to upgrade an SSD+HD setup to Lion too. (Lion has better SSD support). Provided of course that Apple doesn't update Migration assistant, which is what should actually be done. Upgrading this way took me 2,5 hours, most of which was spent waiting ofcourse.
Message was edited by: jason487
Message was edited by: jason487

New project using Daq Assistant or not ?

Hi everybody,
I need to create a software to do some realtime acquisition & analysis.
I trained myself a little bit on c# lessons to get use to this programming language; I’m also discovering Measurement Studio & Visual Studio. (I’ve background in C++).
My software will have 2 modes :
Continuous acquisition, signal plotting + signal processing & plotting (fft, 1/3 octave band filter)
Triggered acquisition, signal plotting + signal processing & plotting (fft, , 1/3 octave band filter)
I have examples in my National Instruments directory which don't use daq Assistant and code is different from generated files with daq Component.
If I use Daq Assistant ( http://www.ni.com/tutorial/4652/en/ )
I know that the code to create channel is stored in DaqTask.cs
Plotting :
NationalInstruments.AnalogWaveform<double>[] acquiredData = daqTaskComponent1.Read();
waveformGraph1.PlotWaveforms(acquiredData);
When I look to examples, like "MStudioVS2010\DotNET\Examples\DAQmxWithUI\SpectrumAnalyzer\cs "
all code to create channel is generated in Mainform.cs, there is no Daq Assistant (http://www.ni.com/tutorial/5409/en/ )
and there is a slight difference between acquired type :
private AnalogWaveform<double> data = new AnalogWaveform<double>(1000);
data = reader.EndReadWaveform(ar);
acquiredDataWaveformGraph.PlotWaveform(data);
Questions :
What is the difference between AnalogWaveform<double> and AnalogWaveform<double>[] ? why it's not the same type ? I need to do some signal processing with this signal, so what type should I use for my application ?
I didn't succeed to configure my 2 modes in daq Assistant (continuous and triggered acquisition) is it possible or should I create 2 Items in my solution, one for continuous acquisition and on for triggered acquisition ?
Kind regards,

Check out the downloads section of iLounge.com. There are a handful or two of applications that will help you transfer songs from the iPod to the computer.
Another option is to network the two computers together and transfer the iTunes folder to the new Mac. All you need is an ethernet cable and to turn on file sharing in the Sharing preference panel. Depending on how old your "older" Mac is, you might need a crossover ethernet cable.
A third option is to hook up the two computers using a Firewire cable. On the older Mac make sure it is shut down, hook the two computers up, turn on the older Mac while holding down the "T" key. On the new Mac you should see the old Mac's hard drive show up. Just find the iTunes music folder and copy it over. You could also use the Migration Assistant which will be in the Utilities folder of the new Mac.
Hope this helps.

Trouble using configuration assistant

Similar Messages

Maybe you are looking for