Trouble with Attachments

When viewing emails with an attachment, like reviewing a bid sent to me by a contractor, you can't return back to the email folder. There is no delete or any menu on the top. This has happened to me twice. I would go to home/desktop and hit mail again, but it just returned to that page of the attachment. I reset the Ipad numbers of time by holding down the home key and power together with no results. I finally in both instances I had to go to my mail via my other computer and trash the attachments to get it off of my ipad. Someone tell me how to do this please.

I touched everywhere and could not get the Done or open in buttons to appear. exiting via the Home button and reopening mail still resulted in not being able to get to the done or open in buttons.
Doug Eldred wrote:
On a simple attachment, like a rich-text document, there's a "Done" button at upper left. It disappears after a few seconds, but tapping in the center of the document brings it back for a few seconds. Do you see something different? If you have something like GoodReader installed, it'll also give you the option to open the document there, instead, if that's more convenient for any of a number of possible reasons.

Similar Messages

  • Why do I have trouble with attachments being stripped when sending email via Earthlink Webmail using Firefox?

    I recently built a new computer running Win 8.1. However, I have had trouble sending and receiving attachments with Earthlink Webmail on Firefox. I sometimes cannot see attachments to emails I receive, although the size of the file indicates they are there. When I try to send an email with attachments, the browser contacts Earthlink, and then the message reappears, but the attachments have been stripped. If I hit Send again, the message goes, but without the attachments. If I re-attach the attachments and hit send, they are again stripped. I contacted Earthlink support, and they told me it is a problem with Firefox. I then tried IE and was able to send the attachments without a problem.
    I would really appreciate any help as Firefox is my browser of choice.

    1. Not sure how to send an email in a private browsing window... I use Earthlink Web Mail and I cannot find anything on that site about private browsing window.
    2. Have not tried this yet, but will when I get a chance.
    3. Not sure. My old computer ran XP. Never had the problem with it. Right now, it is not connected to the internet, so can't check it.
    4. I neglected to mention... I did try IE and it worked fine.
    I do have Norton 360 installed, but it was not a problem on the XP machine.
    Thanks for your response. I have been so busy lately that I just now picked up your response. I have not had time t to try anything else.
    As far as the file type, I was trying to send pdf files. Have not tried other file types.
    Earthlink limits messages (and attachments) to 20 MB. The files were less than 3 MB.

  • TS3276 Mail Services - Mavericks this is new OS to me.I am having trouble with attachments to my e-mails.  The attachments were not large (single sheet typed).  Getting message file to large.  Never had this before.  Please advise correct procedure to att

    Some of the attachments were only a couple of typed pages.  I saved them as pdf format so receiver could read.  The pdf file would not attach.  Program gave message file to large for attachment to e-mail.  Perhaps I am not doing correct procedure to attaching a file to an e-mail.  I tried typing the document and saving it in pdf format to the desktop.  Opened the e-mail on Safarii - typed a quick message and then tried to drop /drag attachment from desktop to e-mail. Up pops the stupid message.  Would someone give me the step by step procedure for adding attachments to an e-mail being sent via Safari.  Also is there a way to send large files as an attachment.  I was able to do this when I was using mountain lion.  Help please.

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • Trouble with attachments in mail

    There is no way anymore for me to attach a file in mail (under OS X Mountain Lion; Google IMAP account type):
    - when using the attachment button, once a file selected, I clicked on "Choose File" and I just get nothing attached to the email;
    - when drag and dropping the file into the email, it gets apparently attached but the receiver gets an empty file.
    Did anyone experienced the same? How to fix this?

    It is just the way that Mail handles some types of files. pictures, pdfs and a few others.

  • I have a MacBook Air, OS 10.8.5 I am having trouble sending attachments with Mail. Even small (130K) files don't go. It tries to send then gives up. What can I do to fix this?

    I am having trouble send messages with attachments in Mail. Even small attachments (130K) Mail tries to send, then gives up and the message sits in my out box. How can I fix this?

    1. You need an external DVD drive.
    2. There are no Mac OS X applications or other software in the iTunes App Store.
    (116312)

  • PC T'bird users having trouble with my Mail e-mail with attachments

    Lately a couple of co-workers have had bizarre troubles with e-mail I've sent them with attachments. I'm using Mail on a Mac (10.5.8), they're using Thunderbird on PCs. When I've sent them attachments ("Windows-friendly," attached at end of e-mail), they haven't been able to e-mail me via Reply . . . their font is changed to white on white. Occasionally their whole application will hang, and one person had to do a hard reboot. Only other relevant detail I have is that the mail I send them originates as Stationery, and some of the text is colored. I'm currently working to narrow down the variables, but if that "white on white" issue rings a bell immediately to anyone, I'd be very curious to hear about it.
    Mucho thanko.
    Rob

    After a series of tests with the Thunderbird users, we've established the problem was not:
    Mail/Thunderbird incompatibility
    related to Mail's stationery
    related to styled text
    only because of attachments
    only because of PDF attachments
    Both users had the trouble after I forwarded PDFs to them from two different outside suppliers. So far, my theory is that there was something about those particular files. After five run-throughs where the co-workers had no problems with e-mail from me, I now want to replicate the problem, but (understandably) they're not eager to lose their work time to do it. I'll post more as I learn more.
    Thanks, BDAqua for the ideas about blank lines around the attachment.
    Rob

  • Trouble sending attachments with Mail 7.0

    I just upgraded to Mavericks and I just started using Mail 7.0 to manage my email (switching from Outlook 2011 for Mac).  I'm using an early 2008 Mac Pro.  I'm having trouble sending emails with attachments through Mail 7.0.  Any attachment regardless of file type or size doesn't go through on the first try.  I compose my email, hit send and then after sitting in the outbox for a minute or two I get this error message...
    I then click on "Try With Selected Server" and sometimes it will send after that and sometimes it won't.  File size doesn't seem to matter.  I switch back to Outlook and all attachments send just fine.  Outlook has its own bugs (that's why I'm trying to switch to Mail) so I'm trying to make Mail my email app.
    Any help is greatly appreciated.  Let me know if you need any more info.  NOTE: I'm not an IT person so please try to dumb down your answers to a first grade level.

    I am also having the exact same issue only with exchange emails that have attachments... funny thing is the problem only persistis on my MacBook not on my Imac.  Both running Mavericks, set up identically and both totally up to date.   I will on occacsion get the can't send mail error on the imac but after I click try again it goes through... on the MacBook I'm not so lucky and end up having to email people dropbox links to every darn file I want to send from my laptop.  Talk about a pain in the butt.  Apple please address and fix. 
    btw the unchecking auto discovery trick didn't make any difference for me
    thanks for bringin this up
    James

  • Mail 2 File scenario - problems with attachments in file receiver

    Hi experts,
    I want to receive PDF documents via email and send them thru file adapter. Now I have some trouble with the attachments. I have configured my mailsender as follows:
    localejbs/AF_Modules/PayloadSwapBean    TRANSFORM
    sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean    mail
    Modules:
    TRANSFORM       swap.keyName   Content-Disposition
    TRANSFORM     swap.keyName     Content-Description
    TRANSFORM       swap.keyValue     MailAttachment-1
    TRANSFORM       swap.keyValue     attachment;filename="MailAttachment-1.pdf"
    Now what modules do I have to use in my file receiver when I want to write the PDF-attachment to my directory? I already tried a lot and referred to many blogs but nothing really worked. I only get my header information in the output file.
    Any ideas?
    Thanks in advance.
    Best regards.
    Oliver.

    Hi
    Check this blogs
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417700)ID1810608850DB10913328217115658435End?blog=/pub/wlg/1685
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417700)ID1810608850DB10913328217115658435End?blog=/pub/wlg/2849
    Regards
    Ramesh

  • Trouble with contact book (was William Bennetrt)

    trouble with email attachments Contact Book

    Elements 12    ?on OS   can not put a list of  names in the contact book
    Bill
    In a message dated 10/30/2013 12:39:06 A.M. Central Daylight Time, 
    [email protected] writes:
    Re:  Trouble with contact book (was William Bennetrt)
    created by andaleebfatima1
    (http://forums.adobe.com/people/andaleebfatima1)   in Photoshop Elements - View the full  discussion
    (http://forums.adobe.com/message/5799481#5799481)

  • Loading trouble with reader

    In trying to load reader from the online store, it gets about 80% finished and then gives an error saying I need a registration key. I have had Reader on this computer before and it worked fine but one day it stopped coming up automatically on the list for opening attachments. If I could load an older version that is simpler that would be the best. Any ideas? Running windows XP pro. Thanks

    I just wanted to say I was "searching" for answers to my own trouble with Adobe Reader 9, when I came across your post and "graffiti's" answer!
    Graffiti wrote:
    "Are you trying to get it from here: http://get.adobe.com/reader/
    If so, try downloading from the FTP site at ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.1/enu/AdbeRdr910_en_US.exe and see what happens. It should work."
    I clicked directly on that link ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.1/enu/AdbeRdr910_en_US.exe and it did WORK!!! I'm so grateful because for days I've been unable to access documents that require Adobe Reader!
    Thank you Graffiti, and thank you duendestudio for the post heading I needed ~ I'm now a happy camper! 
    God bless you both!
    Litaseat
    PS: I run Win XP Home

  • Trouble with browser editing FTP upload

    I have been updating a site to a sub-domain of my personal site while working for client. Yesterday when I tried to walk them through the in-browser editing feature I got an error that wouldn't let me login to edit the site. I followed all of the instructions in the error message (use the "upload via FTP" setting, sign in with the same user) but I still can't log in. Is this a bug with how Muse handles sub-domains, or what else am I doing wrong?

    No, everything uploaded correctly. You can see my site properly  
    -Eric
    On August 23, 2014 at 3:37:13 PM EDT, Zak Williamson (Adobe) <[email protected]> wrote:      Trouble with browser editing FTP upload    reated by Zak Williamson (Adobe) in Help with using Adobe Muse CC - View the full discussion   When using File > Upload to FTP Host... do you receive a warning message that the domain name could not be validated?    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6668001#6668001  Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:   To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.   Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community  For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • E-Mailing Photos from iPhoto - Having trouble with resolution

    I am having trouble with emailing pictures from i-photo. When I email pictures as attachments they end up being low resolution versions and the receiver can not print them. I can not figure out what sort of setting I must have set. Please help.

    MMVP
    Welcome to the Apple user assistance forums
    1 - how are you selecting and attaching the photos?
    2 - what is the resolution of the photos in iPhoto?
    3 - if you are using the iPhoto e-mail capability (recommended) you select a photo(s) and click mail - there you can choose actual, large, medium or small
    4 - this creates an e-mail message in the e-mail client of your choice (iPhoto preferences) - if you are using Apple mail in the lower right hand corner under the e-mail there is a menu where you can set Actual, large, medium or small
    Be sure that both selections are set the way you want them - if either is se tto small you will send a small (low resolutin) photo
    LN

  • I am trying to publish my site so a client can view it. In the past I have not had trouble with this

    I am trying to publish my site so a client can view it. In the past I have not had trouble with this

    Adobe really does have the worst customer service/tech support of any product I have ever experienced. It is so unfortunate.
    Date: Tue, 13 Aug 2013 08:26:34 -0700
    From: [email protected]
    To: [email protected]
    Subject: I am trying to publish my site so a client can view it. In the past I have not had trouble with this
        Re: I am trying to publish my site so a client can view it. In the past I have not had trouble with this
        created by Brad Lawryk in Help with using Adobe Muse CC - View the full discussion
    We need a little more info ..
    Where are you publishing to and what is happening when you try and publish?
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5590683#5590683
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5590683#5590683
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5590683#5590683. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Windows user having trouble reading attachments since 10.4.4

    Has anyone else experienced problems sending attachments (specifically Word docs) to Windows users? I have experienced this only since the latest batch of updates. I have checked my settings and 'Windows friendly' is the default for mail. I have also sent the docs I have had trouble with to an old mac and this works fine which leads me to think its 10.4.4 as the cause?
    Help!!!!!!!!!!!

    As I have emailed, in part:
    Well, this Mac friend is not all right! Please tell me the exact method of creating this document, and the version of Word being used. It is not recognized as a valid format by any of my applications that should open it. Also, tell me how you are connected to the internet.
    and
    Placing the cursor over the attachment, reports it to be of the type octet stream. This is most often seen when an exchange server, or some other MS program is involved, and working improperly.
    Also, try switching off windows friendly setting and sending to me again. Does the document open properly when you open the message sent to me in the Sent mailbox?
    Try sending me a JPEG, or other type of attachment -- this might help to check for a transmission error. This does not appear to be simply a Mail problem.
    Ernie

  • Having trouble with the str()function

    I'm having trouble with the str() function. The first parameter is the value and I want to set the format but I keep getting an error. I do it like this. str(locals.array[8]-locals.array[9],"%$.6f"). I get a runtime error, so I tried to remove the "" but now the I get a syntax error.

    Hi,
    Can not see a problem with your statement.
    I have attached a TS2.0.1 example using you expression.
    Regards
    Ray Farmer
    Regards
    Ray Farmer
    Attachments:
    Sequence_File1.seq ‏20 KB

Maybe you are looking for