Trouble with display settings for projector/Reactable

Hi,
I'm trying to install a musical hardware interface called the Reactable for use with my iMac, and I'm having trouble getting the correct display settings. It's designed to work with laptops and it works fine for the most part with my Apple Hackintosh, but I can't seem to get it working correctly with my iMac. The tech support from the Reactable company recommends that I use 1600x1200 resolution or 1024x768 (native) on the projector, but when I open my display settings I am not presented with either of those options. It only permits me to use 1024x768 and 1024x768 (stretched).
The only instance in which I can get the projection to cover the whole table is with 1024x768, but then the projection is too large. Do I need to change the scaling somehow? How do I do that?
Thanks,
Justin

1080p. If you have a Mac Mini with an HDMI connector, connect direct through there.
Otherwise you'll need to look at either: Which Macs don't have audio over mini-Displayport connectivity, need either an
Apogee DVI To HDMI Converter / SPDIF Optical Toslink+Coaxial Input Output if you have a mini-DVI or DVI (The left connector is DVI, and the right connector is mini-DVI) connector and it is Intel.
Kanex iAdapt Displayport adaptor if you have a mini-Displayport ( http://upload.wikimedia.org/wikipedia/commons/thumb/4/47/Mini_DisplayPort_on_App le_MacBook.jpg/300px-Mini_DisplayPort_on_Apple_MacBook.jpg
) connector.
Note, thunderbolt connectors look the same as mini-Displayport except they have the lightning icon symbol.
PowerPC Mac Minis, need a StarTech DVI2HDMIA connector together with an RCA minijack to red and white splitter cable.

Similar Messages

Has the underscan feature been removed from the display settings for a projector in 10.8.2 for any reason or is this an oversight

Hi
Does anyone know if there is another way to find the underscan feature in display settings for Mac OSX 10.8.2 other than through the display settings. We set up our ceiling mounted prjectors at the start of September when we moved into our new school building at a significant cost. The projectors linked to the teacher's Imac projected onto the interactive whiteboards at the front of the classroom perfectly on 10.8.1. We recently updated to 10.8.2 and now the projected image no longer fits on to the boards and is about 2 feet higher up to the wall. The underscan feature is not available to drop this any ideas.
Moving projectors is not an option due to the cost of bringing in the contractor to extend the ceiling mounts.
thanks
Marcus

Clemens
We have an SR raised which is now with development, but so far we have not been able to pin down what is causing this.
Basically we see entries end up on the recovery queue with nothing written in any logs, even if we increase the level of logging to debug.
This does not happen under load, the exact opposite. If nothing is going on and then we get 5-10 processes start, we see about 1% end on the queue. I pushed 500,000 messages through it last weekend and nothing ended up on the queue, yet a run on Monday of just 100 caused 2 entries on the queue with no explaination.
I have tried everything I can think of, but so far have not been able to re-create the condition at will, it is completely non-deterministic. It also happens on all 5 of our rigs, so it is not machine specific.
I have tuned the BPEL engine and it easily copes with our throughput. We are running with a 10g dehydration store, either single instance or active-passive depending on environment, but I do not think this is going to be causing an issue.
We have about 20 async processes and sub-processes and the problem can occur at any point, although mostly on Invoke and Callback. Each process contains a mixture of async (to BPEL), sync (to External) and a reasonably number of database adapters in each process.
It is not the fact it is placing the entry on the queue that is my issue, it is the fact we have no idea WHY it has ended there as there are no log entries.
Any ideas what else I can try?
Pete

HT5648 OS10.6.8 Firefox 24.0 The new Yahoo mail shows no graphics. However, the new Yahoo mail displays correctly in Safari and Chrome. I believe this has to to with the settings for Javascript. Help me, please.

OS10.6.8, Firefox 24.0
The new Yahoo mail shows no graphics using Firefox 24.0 - just identical rectangles where new icons should be.\. However, the new Yahoo mail displays correctly in Safari and Chrome. I believe this has to to with the settings for Javascript. Those settings aren.t easy to access in the most recent Firefox 24.0 version. Help me, please.

The settings for Javascript are either on or off, Fireefox 24 doesn't give you a option to turn off Javascript, unless you installed something like NoScript extension (or some other Javascipt blocking add-on)
If NoScript, then you need to use the View > Toolbars > Customize and drag the NoScript "Temp Allow All" button to the toolbar area to enable all enabled scripts (including Javascript) on that web page.
Under the Firefox Help menu is a option to restart with add-ons disabled to see if something you might have installed is causing your problem.
Reinstall Firefox or create another user account and run Firefox there to try to localize your issue.
I'm having no problem here on 10.6.8 in Firefox, Chrome or Safari, Yahoo Mail works perfectly.

VmWare Display settings for guest OS Win7 Pro and others not saving

Mid-2014 MBP 15" with Retina, Intel iris Pro, 16GB, 512SSD. Running vmWare 7.1.2 on Yosemite 10.1.2:
- Win7 Pro VM setup with 8GB, 2 'cores', 128GB SSD.
- the Display settings for the Win7 Pro guest won't persist when switching to and from Mac desktop
- Doesn't matter if Full Screen or in Window, it defaults to 1140 x 900 or something like that, and will not keep settings made after Full Screen is selected
- Having done some research before coming here: I have uninstalled and re-installed vmTools. I have tried it with 'Use Full Retina Display' setting in vmWare guest settings, doesn't make a difference other than the default size is either the maximum Retina resolution for the Win7 Pro desktop or the 1440x900 default when the 'Use Retina..' setting is set.
- Apparently this is an Apple bug with Retina MBP and not vmWare, according to vmWare. ;}
Thought, suggestions, other?
Thanks folks!
-=-Dennis

Now having worked with VMware support. Here's the fix for anyone experiencing this problem on a rMBP with Fusion 7.x and running Win7Pro or others as guests, that are not retaining the display settings when either rebooting the guest, pausing the guest or switching between the Mac desktop and the GuestOS desktop.
1. Find a file named WMwareResolutionSet it can be located under ProgramFiles or ProgramFile(x86)-->VMware-->VMware Tools-->
2. Move, do not copy, this file out of this directory, onto your Desktop
3. Restart the Guest
4. Whatever resolution settings you have set, should now be retained
This assumes you have already UN-checked 'Use Full Resolution..' Retina display checkbox in VMware Settings-->Display.

HT1494 hi....i cant continuously play my music with my ipod nano....i tried a lot with the settings for wake time but still it is pausing the music path.Please anybody help me with this issue

hi....i cant continuously play my music with my ipod nano....i tried a lot with the settings for wake time but still it is pausing the music path.Please anybody help me with this issue

Is this your problem?
iPod nano (6th generation): Music stops when display turns off
B-rock

Issue with Visibility Settings for Backgrounds and Layers

I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.

Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave

Anyone having trouble with iPad app for Comcast?

Anyone having trouble with iPad app for Comcast?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—again, the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Help with display settings needed urgently

Graphics and icons that are supposed to be round appear oval. For instance the Safari and App icons on the dock appear very oval. Logos on websites I've visited before and I know are round appear oval.
I've tried all display settings and nothing helps. I'm a designer and this is causing a major hinderance. Everything appears condenced / squashed sideways. I'd be very grateful if someone could help with this.
I've just purchased the laptop. I have been using Mac for a few years and I've always selected the "stretched" option from the Display settings which sorted out the problem completely. A circle looked a proper circle. But in this version the option is not available.
Badly hoping someone can help with this.
Thanks.
Version Details - OS X Lion 10.7.4

It sounds like you have selected an incorrect resolution. For starters, are you talking about your Air's display or an external display? You haven't said which Air you have. If you have an 11" model, make sure your display resolution is set to 1366x768. If you have a 13" model, it should be set to 1440x900. These are the proper resolutions for the built in displays. Chosing anything other than the referenced "native" display resolutions will result in distortions or clarity problems.

Trouble with database connector for FAST for Sharepoint

I have plenty of experience with the JDBC connector for FAST ESP using Oracle, but this is the first experience I have with the same connector for FAST for Sharepoint (F4SP). I've created the XML config exactly to specs based on the technet guides
and configured my user accounts on the SQL Server appropriately. I'm using SQL Server 2008 R2.
If I try to use a Windows account, no level of access granted on the SQL Server results in a successful login. Any attempt to use the connector is met with "Login failed for user: domain\username". If I try a SQL Server account, I no longer
see a login failure, but this instead:
PS C:\FASTSearch\bin> jdbcconnector start -f ..\etc\DTtest.xml
Copyright (c) Microsoft Corporation. All rights reserved.
14:44:59,870 INFO [JDBCConnector] Starting the connector!
14:44:59,870 INFO [JDBCConnector] Validating config.......
14:45:00,136 INFO [JDBCConnector] Testing connections to external systems
14:45:00,198 INFO [JDBCConnector] Checking if connections to source and target work....
14:45:00,620 INFO [JDBCAdapter] Opened JDBC Connection
14:45:00,620 INFO [JDBCConnector] Connection made to source system
14:45:00,620 INFO [CCTKDocumentFeeder] Publisher :Initializing: com.fastsearch.esp.cctk.publishers.CCTKDocumentFeeder
14:45:00,620 ERROR [JDBCConnector] Failed creating publisher. Test connection failed.
14:45:00,620 ERROR [JDBCConnector] Caused by: Unable to create status tracker.
14:45:00,620 ERROR [JDBCConnector] Caused by: Could not connect to database. Make sure TCP/IP is enabled for SQLServer.
14:45:00,620 ERROR [JDBCConnector] Caused by: No suitable driver found for ;integratedSecurity=true
14:45:00,620 INFO [JDBCConnector] Connection made to target system
TCP/IP is certainly enabled for SQL Server -- I am connecting to it with Sharepoint 2010, not to mention a test install of Toad Freeware for SQL Server from another machine, resulting in no errors. My connection string, username and password are all
set up according to the technet guide, including the encrypted password set by the encryption utility run the in F4SP Powershell. The same user who runs the connector also ran the encryption tool, so that should not be a problem either.
I've never had this kind of trouble connecting to Oracle databases with the JDBC connector for FAST ESP. Any suggestions? These failures aren't exactly helpful to me. Thanks in advance.

I found the solution to this problem in case anyone else was still curious.
This was caused not by JDBC settings, permissions/access on SQL Server, etc. It was caused simply by a missing SQL Server in F4SP configuration. When you run the F4SP config wizard, either as single-node or multi-node installations, the wizard
might end up ignoring the value you select for SQL Server, even if you are using a deployment XML file. When configuring as a multi-node setup, the wizard ignored both my deployment XML tag <connector-databaseconnectionstring> and the SQL Server
setting done manually in the wizard itself. Examing the evidence, I suspect this was caused by corrupt installation media (since the installer also failed to create some core files in /etc upon doing a reinstall).
The bottom line is that you must see a value for SQL Server in your install_info.txt file in order for the JDBC connector to work with SQL Server, like this:
Other services
Log Server:             myserver.mydomain.com:13415
SQL Server database:    jdbc:sqlserver://myserver.mydomain.com;DatabaseName=FASTSearchAdminDatabase;integratedSecurity=true
If you see this instead, the connector will never work:
So, the JDBC connector is certainly dependent on the main configuration of F4SP, regardless of what SQL Server is targeted in your connector's XML configuration.
Other services
Log Server:             myserver.mydomain.com:13415
SQL Server database:
;integratedSecurity=true
I had no idea there was a connection between my install_info setup and the use of the JDBC connector. But, the connection makes sense considering this was the error message from the JDBC connector:
09:20:04,016 ERROR [JDBCConnector] Caused by: No suitable driver found for ;integratedSecurity=true

How do you add additional resolution options in the display settings for the MacbookPro?

I am using a Dell external monitor with my 2013 MacBook Pro Retina 13 inch. The resolution is 1900x1200 which is not one of the display selections for an external monitor in the Macbook settings. How do I update the display settings to support this monitor?

Function Modules
http://www.erpgenie.com/abap/functions.htm
http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
http://www.erpgenie.com/abap/index.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

Help with Internet Settings for Blackberry Curve 8520 On Orange Pay-Monthly

I need help with my internet settings I'm currently on Orange Pay-Monthly and have recently bought a second hand Blackberry Curve 8520 which is unlocked but used to be on 02! I don't have a clue on what to do or where to start all I know is in the top right hand corner where the signal bar is it says GPRS and WIFI ! I don't want WIFI as I don't have a wireless connection and would like to get the settings for my curve so I can browse the internet and go on Facebook etc and BBM!! I've clicked on the internet logo in the menu bar but it just say's hotspot browser.. but wont let me browse!! Some one please help me !!

Hey BaByPaW1990,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Correct display settings for hp mini 110

can someone please tell me what the correct display settings are for the hp mini 110? thank you!

@ebernier ,
Hello and thank you for posting on the HP support forums. Please check out the following link it will help you when posting so that we can help you better.
Advice for asking the "Very Best Question"
As for correct display setting. What ever setting you find most comfortable is the best.
Please post back if you have any more questions. As well include your full model and product number.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Can't create a new account at ePrintCenter - trouble with the server for 2 weeks.

Hi. I'm trying to create an account at ePrintCenter and all the time getting mesage 'Возникла проблема с сервером. Проблема будет устранена в ближайшее время. Приносим извинения за неудобства.' (A trouble with the server, wait, bla bla bla). When will it be fixed?

For those who are experiencing ongoing issues with their web services, you can attempt to try the following steps that may help resolve your problems.
1.) Completely shut down your printer and restart it
2.) If you have prints that have not printed, log into ePrint Center (or create an account if you do not have one) and then look for your printer status. If printer status is green but you still have pending jobs, delete the pending jobs one at a time (Starting with the oldest first). There may be a print job stuck in the queue that further restricts other jobs from completing.
a. If option 1 or 2 above still doesn’t work, removing web services and re-adding web services will cause the printer to reattach to the cloud.
b. Please note that if you attempt option 3, you will get a new eprint email address (and lose your custom one with no ability to get it back) furthermore, you will need to re-add your printer back to your ePC account.
I am an HP employee

What are the best Color "Display Settings" for both my Macbook Pro Retina and Thunderbolt Display??

I have recently purchased a Thunderbolt Display for my MBPr (early 2013) and was wondering what were the best settings for both to obtain an equal color and graphic appearance. I want to have them identical for working on graphics and illustrations.
Thanks

I have the same laptop. There's nothing you really need to do to optimise the system. Perhaps just install the cuda drivers.
It runs premiere like a dream.

Restore display settings for MBP- where is preference?

I have a MBP and was playing around with the display settings and messed it up and now want to restore it. I have Time Machine set up- where do I go to find the setting and restore it to what it was yesterday? What folder is it in? Thanks (again), Judy

Got it restored to what it was...... Judy

Trouble with display settings for projector/Reactable

Similar Messages

Maybe you are looking for