Trouble with Dynamic Calc Scenario
We have built a dynamic Calc scenario in our first 11.1.2 Planning environment that works fine in web forms; Forecast vs Prior Forecast Version. However, when we created our second environment the dyanmic scenario is now causing errors with the web forms. I am getting the generic Data form is invalid, check log for details.
I have isolated the problem to this one scenario. We have three other dynamic scenarios on the form and they work fine.
The formula on the scenario below which is not working does reference another dynamic scenario (Prior Forecast Version, which is working).
Forecast vs Prior Forecast (Scenario not working)
"Forecast" - "Prior Forecast Version";
Prior Forecast Version works fine and here is that formula:
if (@ISMBR("Final"))
"Forecast"->&FcstPF;
elseif (@ISMBR("Final_Jul"))
"Budget"->"Final";
else
@PRIOR("Forecast", 1, @RELATIVE("Version", 0));
endif;
The Prior Forecast Version is before the Forecast vs Prior Forecast in the outline.
I have checked the formulas and settings on each one and they are the same in both environments. We used LCM to build the second environment.
Any suggestions on where to look next?
I am not finding anything in the planning logs that seems to help, do I need to turn on auditing first to get information from the planning logs when you get the generic Check Planning Log for Details message?
Thanks.
I haven't check the essbase log but will do so. I thought I checked the correct planning log, but looking at the path I was using, I might have been looking for the log in the wrong place. I was using the path from the troubleshooting guide but it was the diagnostic logs and maybe that is only the correct one when we have auditing turned on.
Help on the path to the correct planning log would be great. I was looking in middleware/user_projects/epmsystem1/diagnostics/logs
Thanks.
Similar Messages
-
Essbase : Order evalution with dynamic Calc : Account x Scenario
Hi everybody,
I'm trying to calculate a variation N / N-1 in % for All Accounts.
basically : %/ N-1 = (Actual- Actual N-1) / Actual N-1 - I create a scenario.
I create a scenario %_N_1 which is Dynamic Calc.
"%_N_1" = ("ACTUAL" - @MDSHIFT( "ACTUAL" , -1 , "Year" , ))/@MDSHIFT( "ACTUAL" , -1 , "Year" , )*100;
But with agregated Accounts (which are dynamic calc also), Essbase sums the % ... which is wrong !!!
Question : How could we set the priority between Scenario and Account for Dynamic Calculation.
regards,
ps : I want not to put this calculation in Financial Reporting, because there are a lot of reports that use this measure : %_N_1 !Two-pass Calc
You should basically put this on every formula that is a % to make sure it happens after the aggregation stuff.
It get's tricky if you did two-pass on two pass but I believe you aren't using two-pass so you should be good to go -
Problem with Dynamic Calc members in calc script
Hi
i wrote a calc script which calculates the value of acct2 which is dependant on the value of acct1 that is calculated from acct0 as bellow:
FIX(
M1
acct1(
acct1=acct0->M2;
acct2=acct1->M2;
ENDFIX
the value of the intersection of M1->acct0 is 100 as input ,what i wanted from this calc script is the acct2->M1 to be 100 after executing the script once
but the fact is i have to run it twice to get the expected result.
the outline is like this:
M:
M2 Dynamic calc M2=M0+M1
M0 Stored
m1 stored
Account:
acct0 stored
acct1 stored
acct2 stored
Can anyone tell me the reason and how to solve it?
Edited by: user10450070 on 2011-1-25 上午1:38Is acct1 correct after one run of the calculation, but acct2 incorrect? If so, it's because Essbase is calculating them both at the same time (parallel), whereas it has to be forced to calculate acct1 first and acct2 second. You can do this with separate fixes as below:
FIX(M1)
acct1=acct0->M2;
ENDFIX
FIX(M2)
acct2=acct1->M2;
ENDFIX
Or, you can you can force it into calculating in serial mode:
SET CALCPARALLEL 0;
FIX(M1)
acct1=acct0->M2;
acct2=acct1->M2;
ENDFIX
Sabrina
Edited by: SabrinaD on Jan 26, 2011 7:56 AM -
Retrive time with Dynamic Calc
Hi Experts,
My users run a large smart view report which works well
However, when they change one of the member on the query to DC member (dense)
Then the retrieve takes forever and they getting network error from smart view.
I try to figure out , how can I improve the retrieve time on my BSO app, focusing on DC issues
I try to increase the data cache, index cache, retrieval buffer and sort.
I add command of DYNCALCCACHEMAXSIZE and the retrieve doesn’t getting better.
In addition, can you pls help me understand the app log file,
Here’s what happen after I ran the report, maybe it will lead
To the problem:
[Mon Aug 06 02:41:03 2012]Local/Orac///1768/Info(1200481)
Formula for member [YTD USD Display] will be executed in [TOPDOWN and CELL] mode
[Mon Aug 06 02:41:03 2012]Local/Orac///1768/Info(1012710)
Essbase needs to retrieve [1] Essbase Kernel blocks in order to calculate the top dynamically-calculated block.
[Mon Aug 06 02:41:03 2012]Local/Orac///1768/Info(1012736)
The Dyn.Calc.Cache for database [Main] can hold a maximum of [242] blocks.
[Mon Aug 06 02:41:03 2012]Local/Orac///1768/Info(1012737)
The Dyn.Calc.Cache for database [Main], when full, will result in [allocation from non-Dyn.Calc.Cache memory].
[Mon Aug 06 02:41:03 2012]Local/Orac///1768/Info(1019018)
Writing Parameters For Database [Main]
[Mon Aug 06 02:41:03 2012]Local/Orac///1768/Info(1019017)
Reading Parameters For Database [Main]
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1070013)
Index cache size ==> [307200000] bytes, [37500] index pages.
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1070014)
Index page size ==> [8192] bytes.
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1070081)
Using buffered I/O for the index and data files.
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1070083)
Using waited I/O for the index and data files.
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1019019)
Reading Data File Free Space Information For Database [Main]...
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1006025)
Data cache size ==> [512000000] bytes, [9359] data pages
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1006026)
Data file cache size ==> [0] bytes, [0] data file pages
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1080053)
Free space recovery skipped. Estimated free space recoverable by RecoverDbFreeSpace: [11068706640] bytes
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1024033)
Missing Database Config File [E:\Hyperion\AnalyticServices\APP\Orac\Main\Main.cfg], Query logging disabled
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1203135)
Starting the Data Mining Framework
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1203136)
Data Mining Framework successfully initialized.
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1200551)
Allocated TRIGMAXMEMSIZE: [4096] Bytes.
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1013205)
Received Command [Get Database Volumes]
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1013205)
Received Command [Set Database State]
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1019018)
Writing Parameters For Database [Main]
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1019018)
Writing Parameters For Database [Main]
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1013205)
Received Command [Get Database State]
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1013205)
Received Command [Get Database Info]
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1013205)
Received Command [SetApplicationState]
[Mon Aug 06 02:41:06 2012]Local/Orac///1768/Info(1019010)
Writing Application Definition For [Orac]
[Mon Aug 06 02:41:06 2012]Local/Orac///1768/Info(1019011)
Writing Database Definition For [Main]
[Mon Aug 06 02:41:06 2012]Local/Orac///1768/Info(1019022)
Writing Database Mapping For [Orac]
[Mon Aug 06 02:41:06 2012]Local/Orac///5132/Info(1013210)
User [essadmin] set active on database [Main]
Pls help me find out how can I overcome this.
Many thanks,I'll add on to Dan's comment that you very much need to test the dynamic calc (if indeed that is the problem) in the proper context.
Amusing but painful story:
I was once tasked with reducing calc time on a BSO database. i saw long ugly stored member calcs. Hah! I cleverly converted them to dynamic and calc times dropped. No one told me (and I didn't ask) how they were to be reported. There were thousands of instances of this member on the Excel sheet. What had been a nice fast retrieve dropped to five minutes. Whoops.
Take your pain wherever you like -- if you are reading multiple blocks to do the calc (my guess) nothing on earth is going to make it fast. Why make it dynamic in the first place? How many times is the member retrieved? Is it all in the block or, as i guessed, across multiple blocks?
Last comment -- again (this is getting boring) I agree with Dan -- caches are not, usually, the source of any performance joy and it always comes down to design.
Regards,
Cameron Lackpour -
Hello, could someone help me why after creating the dynamic calc member below, our calc script somehow get stuck/ ran very very slow...
Below is currently our Hierararchy for Division dimension:
Division Dimension
Division Rollup ( Never Share)
Division 1 ( Never Share)
Division a (Never Share) level 0
Division b (Never Share) level 0
Division c (Never Share) level 0
Division 2 (Never Share)
Division d ( Never Share) level 0
Alt_Division without cd (Dynamic Calc) ...and the member formula I did is
="Division Rollup" - "Division c" - "Division d" ;
After I refresh, the Alt_Division without cd went fine, calculated correctly when I retreive in Essbase Escel , however, the big problem was, when we run our aregular Essbase calc scripts, it somehow got stuck with Alt_Division without cd member and the calc went very very slow almost to the point that it just stopped calcing.
Could you please let me know if there is something wrong with my dynamic calc member above... Should the Alt_Division dynamic calc should not be a sibling of the Division Rollup member? or I could not use the "Division Rollup" member .
Could you please recommend a better way of writing the dynamic calc member ( and it's position in the Hierarchy) ... without me aggregarting the dbase ...( I like dynamic calc since it aggs on the fly).
Please advise.
Thanks.Few Things...
I am assuming Division is a sparse Dimension. A Dynamic Calc member formula on a Sparse dimension member will surely take lots of time.
Suggestion 1:
Create an Alternate hierarchy sharing c and d. Change the consolidation operators to get the C - D at Alt_Hierarchy.
Suggestion 2:
Make the member Store and put the desired calculation in a Calculation script rather than having it as a dynamic calc member formula.
Hope this helps.
Madhavi -
Retrieval performance become poor with dynamic calc members with formulas
We are facing the retrieval performance issue on our partititon cube.
It was fine before applying the member formulas for 4 of measures and made them dynamic calc.
The retrieval time has increased from 1sec to 5 sec.
Here is the main formula on a member, and all these members are dynamic calc (having member formula)
IF (@ISCHILD ("YTD"))
IF (@ISMBR("JAN_YTD") AND @ISMBR ("Normalised"))
"Run Rate" =
(@AVG(SKIPNONE, @LIST (@CURRMBR ("Year")->"JAN_MTD",
@RANGE (@SHIFT(@CURRMBR ("Year"),-1, @LEVMBRS ("Year", 0)), @LIST("NOV_MTD","DEC_MTD")))) *
@COUNT(SKIPNONE,@RSIBLINGS(@CURRMBR ("Period")))) + "04";
ELSE
IF (@ISMBR("FEB_YTD") AND @ISMBR ("Normalised"))
"Run Rate" =
(@AVG (SKIPNONE, @RANGE (@SHIFT(@CURRMBR ("Year"),-1, @LEVMBRS ("Year", 0)),"DEC_MTD"),
@RANGE (@CURRMBR ("Year"), @LIST ("JAN_MTD", "FEB_MTD"))) *
@COUNT(SKIPNONE,@RSIBLINGS(@CURRMBR ("Period")))) + "04";
ELSE
"Run Rate"
=(@AVGRANGE(SKIPNONE,"Normalised Amount",@CURRMBRRANGE("Period",LEV,0,-14,-12))*
@COUNT(SKIPNONE,@RSIBLINGS(@CURRMBR ("Period"))))
+ "Normalised"->"04";
ENDIF;
ENDIF;
ELSE 0;
ENDIF
Period is dense
Year is dense
Measures (normalised) is dense
remaining all sparse
block size 112k
index cache to 10mb
Rertrieval buffer 70kb
dynamiccalccahe max set to 200mb
Please not that, this is partition cube, retriving data from 2 ASO, 1 BSO underline cubes.I received the following from Hyperion. I had the customer add the following line to their essbase.cfg file and it increased their performance of Analyzer retrieval from 30 seconds to 0.4 seconds. CalcReuseDynCalcBlocks FALSE This is an undocumented setting (will be documented in Essbase v6.2.3). Here is a brief explanation of this setting from development: This setting is used to turn off a method of reusing dynamically calculated values during retrievals. The method is turned on by default and can speed up retrievals when it involves a large number of dynamically calculated blocks that are each required to compute several other blocks. This may happen when there is a big hierarchy of sparse dynamic calc members. However, a large dynamic calculator cache size or a large value of CALCLOCKBLOCK may adversely affect the retrieval performance when this method is used. In such cases, the method should be turned off by setting CalcReuseDynCalcBlocks to FALSE in the essbase.cfg file. Only retrievals are affected by this setting.
-
Having trouble with Dynamic-to-static
Having an issue with traffic passing over a dynamic-to-static VPN. Phase 1 and Phase 2 both complete. sh cry ips sa on the ASA shows 0 #pkts encaps. From the 861 it shows 0 #pkts decaps
I know its a lot to look at but hopefully someone will see something obvious that I messed up.
The second tunnel is working. It is coming from a CradlePoint MBR1400 so I am unable to apply the config from that.
ciscoasa# sh crypto isakmp sa
Active SA: 2
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 2
1 IKE Peer: 107.46.57.189
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
2 IKE Peer: xxx.xxx.xxx.xxx
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
ciscoasa# sh crypto ipsec sa
interface: outside
Crypto map tag: SYSTEM_DEFAULT_CRYPTO_MAP, seq num: 65535, local addr:
local ident (addr/mask/prot/port): (10.10.0.0/255.255.0.0/0/0)
remote ident (addr/mask/prot/port): (192.168.101.0/255.255.255.0/0/0)
current_peer: 107.46.57.189
#pkts encaps: 3166, #pkts encrypt: 3166, #pkts digest: 3166
#pkts decaps: 2828, #pkts decrypt: 2828, #pkts verify: 2828
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 3166, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: xxx.xxx.xxx.98, remote crypto endpt.: 107.46.57.189
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: 0D67A97D
current inbound spi : B59B6F50
inbound esp sas:
spi: 0xB59B6F50 (3046862672)
transform: esp-aes esp-sha-hmac no compression
in use settings ={L2L, Tunnel, }
slot: 0, conn_id: 5472256, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
sa timing: remaining key lifetime (sec): 3020
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0xFFFFFFFF 0xFFF7FFFF
outbound esp sas:
spi: 0x0D67A97D (224897405)
transform: esp-aes esp-sha-hmac no compression
in use settings ={L2L, Tunnel, }
slot: 0, conn_id: 5472256, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
sa timing: remaining key lifetime (sec): 3020
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
Crypto map tag: SYSTEM_DEFAULT_CRYPTO_MAP, seq num: 65535, local addr: xxx.xxx.xxx.98
local ident (addr/mask/prot/port): (10.10.0.0/255.255.0.0/0/0)
remote ident (addr/mask/prot/port): (10.10.10.0/255.255.255.0/0/0)
current_peer: xxx.xxx.xxx.xxx
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 1041, #pkts decrypt: 1044, #pkts verify: 1044
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: xxx.xxx.xxx.xxx/4500, remote crypto endpt.: xxx.xxx.xxx.xxx/2944
path mtu 1500, ipsec overhead 82, media mtu 1500
current outbound spi: 9613FEAC
current inbound spi : 186C9E40
inbound esp sas:
spi: 0x186C9E40 (409771584)
transform: esp-aes esp-sha-hmac no compression
in use settings ={L2L, Tunnel, NAT-T-Encaps, }
slot: 0, conn_id: 5476352, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
sa timing: remaining key lifetime (kB/sec): (3914991/3199)
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0xFFFFFFFF 0xFFFFFFFF
outbound esp sas:
spi: 0x9613FEAC (2517892780)
transform: esp-aes esp-sha-hmac no compression
in use settings ={L2L, Tunnel, NAT-T-Encaps, }
slot: 0, conn_id: 5476352, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
sa timing: remaining key lifetime (kB/sec): (3915000/3198)
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
REMOTE Config Cisco 861
Current configuration : 3112 bytes
! Last configuration change at 13:07:07 UTC Mon Jan 2 2006 by jwright
! NVRAM config last updated at 12:10:49 UTC Mon Jan 2 2006 by jwright
version 15.0
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service sequence-numbers
hostname Corvid
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
logging console critical
no aaa new-model
memory-size iomem 10
crypto pki trustpoint TP-self-signed-3769564853
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3769564853
revocation-check none
rsakeypair TP-self-signed-3769564853
crypto pki certificate chain TP-self-signed-3769564853
certificate self-signed 02
ip source-route
ip dhcp excluded-address 10.10.10.1
ip dhcp pool ccp-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
lease 0 2
ip cef
no ip bootp server
no ip domain lookup
ip domain name yourdomain.com
license udi pid CISCO861-K9 sn
username xxxxx privilege 15 secret 5 $1$SI.
username xxxxx privilege 15 secret 5 $1$y1
ip tcp synwait-time 10
crypto isakmp policy 1
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key ************ address xxx.xxx.xxx.xxx
crypto ipsec transform-set RTPSET esp-aes esp-sha-hmac
crypto map RTP 1 ipsec-isakmp
set peer xxx.xxx.xxx.xxx
set transform-set RTPSET
match address 100
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
ip address dhcp
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map RTP
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.248
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source route-map nonat interface FastEthernet4 overload
ip route 0.0.0.0 0.0.0.0 dhcp
logging trap debugging
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 24 permit 192.168.0.0 0.0.0.255
access-list 100 permit ip 10.10.10.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 100 deny ip 10.10.10.0 0.0.0.255 any
access-list 120 deny ip 10.10.10.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 120 permit ip 10.10.10.0 0.0.0.255 any
no cdp run
route-map nonat permit 10
match ip address 120
control-plane
line con 0
logging synchronous
login local
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
end
ASA5510
ciscoasa# sh run
: Saved
ASA Version 8.2(1)11
hostname ciscoasa
domain-name pme.local
enable password xxx encrypted
passwd xxx encrypted
names
interface Ethernet0/0
nameif backup
security-level 1
ip address xxx.xxx.xxx.xxx 255.255.255.248
interface Ethernet0/1
nameif inside
security-level 100
ip address 10.10.1.1 255.255.0.0
interface Ethernet0/2
shutdown
nameif outside2
security-level 0
no ip address
interface Ethernet0/3
nameif outside
security-level 0
ip address xxx.xxx.xxx.xxx 255.255.255.224
interface Management0/0
nameif management
security-level 100
ip address 172.17.0.199 255.255.255.0
management-only
banner motd **************************** NOTICE ******************************
banner motd * Unauthorized access to this network device is FORBIDDEN! *
banner motd * All connection attempts and sessions are logged and AUDITED! *
banner motd ******************************************************************
banner motd **************************** NOTICE ******************************
banner motd * Unauthorized access to this network device is FORBIDDEN! *
banner motd * All connection attempts and sessions are logged and AUDITED! *
banner motd ******************************************************************
boot system disk0:/asa821-11-k8.bin
ftp mode passive
clock timezone EST -5
clock summer-time EDT recurring
dns domain-lookup inside
dns domain-lookup outside2
dns domain-lookup outside
dns domain-lookup management
dns server-group DefaultDNS
name-server HOMESTEAD-INT
name-server SEBRING-INT
domain-name pme.local
object-group service SQLTEST udp
description SQLTEST for VES
port-object eq 1434
object-group service SQLTEST_TCP tcp
description SQLTEST For VES
port-object eq 1433
object-group service DM_INLINE_TCP_1 tcp
port-object eq ftp
port-object eq ftp-data
access-list nonat extended permit ip any 10.10.11.0 255.255.255.0
access-list nonat extended permit ip 10.10.0.0 255.255.0.0 10.10.11.0 255.255.255.0
access-list nonat extended permit ip 10.10.0.0 255.255.0.0 192.168.101.0 255.255.255.0
access-list nonat extended permit ip 10.10.0.0 255.255.0.0 10.10.10.0 255.255.255.248
access-list outside_access_in extended permit tcp any host DAYTONA-EXT-BAK eq smtp
access-list outside_access_in extended permit tcp any host DAYTONA-EXT-BAK eq https
access-list outside_access_in extended permit tcp any host DAYTONA-EXT-BAK eq www
access-list outside_access_in extended permit tcp any host SonomaBullsEye eq https inactive
access-list outside_access_in extended permit tcp any host AUTHENTICA-EXT-BAK eq www
access-list outside_access_in extended permit tcp any host AUTHENTICA-EXT-BAK eq https
access-list outside_access_in extended permit udp any host xxx.xxx.xxx.xxx eq 1434
access-list outside_access_in extended permit tcp any host xxx.xxx.xxx.xxx eq 1433 inactive
access-list outside_access_in extended permit tcp any host FILETRANSFER-EXT-BAK eq www
access-list outside_access_in extended permit tcp any host FILETRANSFER-EXT-BAK eq https
access-list outside_access_in remark HTTP for TeamWeb
access-list outside_access_in extended permit tcp any host ALEXSYS-EXT-BAK eq www
access-list outside_access_in remark HTTPS for TeamWeb
access-list outside_access_in extended permit tcp any host ALEXSYS-EXT-BAK eq https
access-list outside_access_in extended deny icmp any any
access-list Split_Tunnel_List standard permit 10.10.0.0 255.255.0.0
access-list outside_access_in_1 extended permit tcp any host DAYTONA-EXT-OUT eq smtp
access-list outside_access_in_1 extended permit tcp any host DAYTONA-EXT-OUT eq https
access-list outside_access_in_1 extended permit tcp any host DAYTONA-EXT-OUT eq www
access-list outside_access_in_1 extended permit tcp any host Sonoma eq https inactive
access-list outside_access_in_1 extended permit tcp any host PMEUPDATE-EXT-OUT eq www
access-list outside_access_in_1 extended permit tcp any host FILETRANSFER-EXT-OUT eq www
access-list outside_access_in_1 extended permit tcp any host FILETRANSFER-EXT-OUT eq ssh inactive
access-list outside_access_in_1 extended permit tcp any host FILETRANSFER-EXT-OUT eq https
access-list outside_access_in_1 remark FTPS
access-list outside_access_in_1 extended permit tcp any host FTP-EXT-OUT object-group DM_INLINE_TCP_1
access-list outside_access_in_1 extended permit tcp any host FTP-EXT-OUT range 60200 60400
access-list outside_access_in_1 extended permit tcp any host AUTHENTICA-EXT-OUT eq www
access-list outside_access_in_1 extended permit tcp any host AUTHENTICA-EXT-OUT eq https
access-list outside_access_in_1 extended permit tcp any host OSCODA-EXT-OUT object-group SQLTEST_TCP inactive
access-list outside_access_in_1 extended permit udp any host OSCODA-EXT-OUT object-group SQLTEST inactive
access-list outside_access_in_1 extended permit tcp any host ALEXSYS123-EXT-OUT eq www
access-list outside_access_in_1 extended permit tcp any host ALEXSYS123-EXT-OUT eq https
access-list outside_access_in_1 extended deny icmp any any
access-list inside_access_out extended permit ip any any log
pager lines 24
logging enable
logging timestamp
logging trap notifications
logging asdm notifications
logging from-address [email protected]
logging recipient-address [email protected] level errors
logging host inside 10.10.2.12
logging permit-hostdown
no logging message 302015
no logging message 302014
no logging message 302013
no logging message 302012
no logging message 302017
no logging message 302016
mtu backup 1500
mtu inside 1500
mtu outside2 1500
mtu outside 1500
mtu management 1500
ip local pool IPSECVPN2 10.10.11.76-10.10.11.100
ip local pool SSLVPN 10.10.11.101-10.10.11.200 mask 255.255.0.0
ip local pool IPSECVPN 10.10.11.25-10.10.11.75
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-623.bin
no asdm history enable
arp timeout 14400
global (backup) 1 xxx.xxx.xxx.xxx
global (outside) 1 xxx.xxx.xxx.xxx netmask 255.255.255.224
nat (inside) 0 access-list nonat
nat (inside) 1 10.10.0.0 255.255.0.0
static (inside,outside) DAYTONA-EXT-OUT DAYTONA-INT netmask 255.255.255.255
static (inside,outside) AUTHENTICA-EXT-OUT AUTHENTICA-INT netmask 255.255.255.255
static (inside,outside) ALEXSYS123-EXT-OUT MIDOHIO-INT netmask 255.255.255.255
static (inside,outside) PMEUPDATE-EXT-OUT PMEUPDATE-INT netmask 255.255.255.255
static (inside,outside) FILETRANSFER-EXT-OUT FILETRANSFER-INT netmask 255.255.255.255
static (inside,outside) FTP-EXT-OUT FTP-INT netmask 255.255.255.255
static (inside,backup) FILETRANSFER-EXT-BAK FILETRANSFER-INT netmask 255.255.255.255
static (inside,backup) DAYTONA-EXT-BAK DAYTONA-INT netmask 255.255.255.255
static (inside,backup) AUTHENTICA-EXT-BAK AUTHENTICA-INT netmask 255.255.255.255
static (inside,backup) ALEXSYS-EXT-BAK MIDOHIO-INT netmask 255.255.255.255
access-group outside_access_in in interface backup
access-group inside_access_out in interface inside
access-group outside_access_in_1 in interface outside
route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1 track 1
route backup 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 254
route backup 62.109.192.0 255.255.240.0 xxx.xxx.xxx.xxx 1
route backup 64.68.96.0 255.255.224.0 xxx.xxx.xxx.xxx 1
route backup 66.114.160.0 255.255.240.0 xxx.xxx.xxx.xxx 1
route backup 66.163.32.0 255.255.240.0 xxx.xxx.xxx.xxx 1
route backup 209.197.192.0 255.255.224.0 xxx.xxx.xxx.xxx 1
route backup 210.4.192.0 255.255.240.0 xxx.xxx.xxx.xxx 1
timeout xlate 3:00:00
timeout conn 24:00:00 half-closed 0:05:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
webvpn
http-proxy enable
aaa-server PMERADIUS protocol radius
aaa-server PMERADIUS (inside) host HOMESTEAD-INT
key ******
radius-common-pw ******
aaa authentication ssh console LOCAL
http server enable
http 10.10.0.0 255.255.0.0 inside
http 172.17.0.0 255.255.255.0 management
http redirect backup 80
http redirect outside 80
snmp-server location Server Room
snmp-server contact Jay
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
sla monitor 100
type echo protocol ipIcmpEcho xxx.xxx.xxx.xxx interface outside
timeout 3000
frequency 10
sla monitor schedule 100 life forever start-time now
crypto ipsec transform-set PM1 esp-3des esp-md5-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map dyn1 1 set pfs group1
crypto dynamic-map dyn1 1 set transform-set PM1
crypto dynamic-map dyn1 1 set security-association lifetime seconds 28800
crypto dynamic-map dyn1 1 set security-association lifetime kilobytes 4608000
crypto dynamic-map dyn1 1 set reverse-route
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map cryptomap1 1 ipsec-isakmp dynamic dyn1
crypto map cryptomap1 interface backup
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint xxx.xxx.xxx.xxx
enrollment terminal
fqdn xxx.xxx.xxx.xxx
subject-name CN= xxx.xxx.xxx.xxx, O=xxxx, C=US, St=MI, L=xxxx
keypair xxx.xxx.xxx.xxx
crl configure
crypto ca certificate chain xxx.xxx.xxx.xxx
certificate 041200616c79f4
30820577 3082045f a0030201 02020704 1200616c 79f4300d 06092a86 4886f70d
quit
crypto isakmp identity address
crypto isakmp enable backup
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 86400
crypto isakmp policy 50
authentication pre-share
encryption aes-256
hash md5
group 5
lifetime 86400
crypto isakmp nat-traversal 33
track 1 rtr 100 reachability
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 15
ssh version 2
console timeout 0
management-access inside
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 64.22.86.210 source backup prefer
ssl trust-point vpn.prattmiller.com outside
ssl trust-point vpn.prattmiller.com backup
ssl trust-point vpn.prattmiller.com outside2
webvpn
enable backup
enable outside2
enable outside
svc image disk0:/anyconnect-win-2.5.3055-k9.pkg 2
svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 3
svc profiles AllowRemoteUsers disk0:/AnyConnectProfile.xml
svc enable
internal-password enable
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
dns-server value 10.10.2.1
vpn-tunnel-protocol IPSec l2tp-ipsec
default-domain none
group-policy DfltGrpPolicy attributes
dns-server value 10.10.2.1 10.10.2.62
vpn-idle-timeout 600
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split_Tunnel_List
default-domain value pme.local
webvpn
url-list value Book1
svc profiles value AllowRemoteUsers
svc ask enable default webvpn timeout 10
group-policy AnyConnect internal
group-policy AnyConnect attributes
vpn-tunnel-protocol webvpn
webvpn
svc ask enable default webvpn timeout 15
username xxxx password RrjDgdg5BBLrGPnn encrypted privilege 15
username xxxx password qDxllXruMJHEVZji encrypted privilege 15
username xxxx password dGOqWbOOjP0FVxtl encrypted privilege 15
tunnel-group DefaultL2LGroup ipsec-attributes
pre-shared-key *
tunnel-group DefaultRAGroup general-attributes
default-group-policy DefaultRAGroup
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool (backup) IPSECVPN2
address-pool (outside2) IPSECVPN2
address-pool (outside) SSLVPN
address-pool SSLVPN
authentication-server-group PMERADIUS
tunnel-group pm_ipsec type remote-access
tunnel-group pm_ipsec general-attributes
address-pool IPSECVPN2
tunnel-group pm_ipsec ipsec-attributes
pre-shared-key *
tunnel-group prattmiller type remote-access
tunnel-group prattmiller general-attributes
address-pool IPSECVPN
tunnel-group prattmiller ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 1024
policy-map global_policy
class inspection_default
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect pptp
class class-default
service-policy global_policy global
smtp-server 10.10.2.6
prompt hostname context
Cryptochecksum:8316029502f6698d4015f5e1b3d40a08
: end
[code] TEST [/code]My question about this is the other Dynamic VPN that is working has no static route.
I added:
route outside 10.10.10.0 255.255.255.248 xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP of the non working remote IKE Peer)
This had no effect.
Looking at the two tunnels. The working tunnel is using IKE IPSEC and the nonworking tunnel is using IKE IPsecOverNatT. What have I entered that tells the VPN to use IPsecOverNatT? -
HELP troubles with dynamically generated URLs
I'm trying to integrate a new shopping cart, but DW CS4 can't follow the dynamic links in the template pages. They render fine in Live View. I can follow the CSS in the CSS Styles panel, but of course, it's not editable. Related files are far from complete and if I try to click on one, I get an error that the file can't be found.
The templates all contain dynamically generated URLs such as:
<?php include("${__TPL_DIR__}pages/templates/part.header.tpl.html"); ?>
The .ini files used have site root relative references.
Any ideas? Or am I stuck limping along?Thanks David,
I found a few articles in the Developer Center that were helpful in understanding what I was looking at. The articles on creating Drupal and Wordpress themes explained how the pages are created dynamically, as well as how to use DW to modify and create themes. Though the specifics are different than what I am looking at, the concepts are similar. They also confirmed that attaching the relevant CSS files as design time style sheets was a practical workaround in the absence of an add-on to help DW understand the site structure. I was hoping that I had just not done something correctly, but I can live with a workaround, knowing that an "easier" way isn't just waiting for me to learn something about DW.
Don -
Trouble with Dynamic TextField and Virtual Keyboard
I'm working on a flashlite 3.1 touchscreen device running a flash app that I've written. At certain times, I need to be able to enter text, so I created an onscreen keyboard that updates a dynamic textfield.
If I use a dynamic textfield, a caret doesn't appear, and you can tell where you are entering text. Using some of the text metric info, I've been able to *draw* a caret at the proper position for single line textfields. However, when I try and handle multiline textfields (with wordwrap on), I can seem to figure out what line the *caret* would be or how to breakdown what text is on each line. Has anybody had any success with this? Obviously, hard newlines could be parsed, but the wordwrap is giving me grief.
In addition, for the Selection class to work, the textfield must have focus. In flashlite, this results in a yellow box around the input, which looks horrible. Is there a way to disable the yellow box?
Regards,
BillIt is simple, and should be, but I can't say whether you are implementing something incorrectly or if CS5 has some added complexity (or bug) at play. If we go back to your initial posting, and my initial response, then that should be the end of the story.
I don't own CS5, but I'd hate to think they made something else difficult to deal with like they seemingly did with timeline tweening in CS4 (which I also did not buy into). I believe they invented some new form of textfield in CS5, but it'd be sad if they invented some new property to deal with for assigning text to it.
The only thing I can imagine at this point where it might be something you did involves a couple of factors being at play... 1) you are using the library name of the movieclip, not the instance name, and 2) your Publish Settings are set for AS2 (so that no error is generated... AS2 is not generous with them like AS3). -
Trouble with dynamically filling fields
I have a large form that contains over 50 pages. The first page is a flowable user input form.
There are several fields which are common with other fields in the various underlying hidden pages. When a user selects an account type from a dropdown list, the appropriate account opening checklist appears as page 2.
The user then selects various checkboxes which then makes the appropriate additional pages visible. Thes additional pages contain fields that should autopopulate based on the data entered in page 1 input form.
The fields that are globally bound are fine. The problem is fields where I need to script to autopopulate. For example, there is a ACH authorization distribution section with 2 checkboxes (one for Checking one for Savings) and one Account number field. The page for ACH data, shows the ABA and Bank Name fine since those are globally bound, but the account number is 2 separate fields that I need to script in order to fill in but it is not working correctly.
I think it is the event I have used but I'm not sure which event is best to place the script in. I started in the initialize event of that page but that doesnt work. If I click the checking/savings checkbox again after the ach page is visible, the field populates.
How do I get the field to be prefilled as soon as it becomes visible?
I am very new to scripting and LC. Any suggestions would be greatly appreciated!If you are new to scripting I might suggest using the Action Builder. It is a set of prebuilt actions that do not require scripting. If you are using Windows go to the toolbar at the top, go to Tools and select Action Builder. From there you set a condition and a result. From the condition select what field is going to hold the value you want to be copied and select "is not empty" from the first drop down box. Then in the result section select "set value of field" and then select the field that you want the data copied to. In the result section you will then select from the drop down box what you want the value to be and you select "to the value of field" and select your 1st field. This will mirror 2 fields or even multiple fields from 1 box without global binding. What is nice about the Action Builder is if you go to the Script box at the top you can see Livecycle will populate the actual code on the correct show event. This way you can start to see how the code works and build from there.
-
Trouble with dynamic XML and dataSets
I am generating dynamic XML files from a datasource. When I
try and load into a XMLDataSet I get an 'onLoadError' notification.
Now, if I load the same dynamic content as a static XML file it
works fine, so I know my XPath and XML structure is correct. Has
anyone else run into this issue? I can't find anything
online.Without actually seeing the file, I would say check your
content-type and make sure it is 'text/xml'.
You can see examples of setting the content type here:
http://labs.adobe.com/technologies/spry/samples/utils/query2xml.html
You can sometimes tell just by viewing the dynamic XML in the
browser. If it shows as a XML tree, all is well. If it is a big
blob of text, it's probably content-type...
Let us know...
Don -
Trouble with dynamic link manager in starting a cs6 product
i just re-installed cs6 on a new hard drive. Now, I get an error message when I try to load Photoshop 64-bit. Dynamic Link Manager has stopped working.
I applied the DLM update, applied all the updated to all the programs in cs6, and still getting the DLM error message.
HELP!
Michele Johnson
423-619-9886Tech support was finally able to correct the problem. He went into the appdata folder and renamed the dynamic link manager file. Then he restarted Photoshop, which then automatically recreated the file. Such a simple solution.
-
Dynamic Calc, 2 Pass with Attributes!
Hi there,We have an Occupancy KPI within our Measures dimension, that works off the following member calc:(("Agency"/"Occupancy")/"Actual"->"DayInMonth"->"DummyHome")*7;This is set with <Dynamic Calc> <Two-Pass>This works great accross our cost centres until we start to use attributes within the ADD-In. Then the figures are shown as #Missing - Nuts!Any ideas would be welcomeMany Thanks in advanceMark
Are you also trying to pull dynamic time series or any other dynamically calculated member? If every other intersection is stored, I would expect this to work. However, if you attempt to pull, say Q-T-D(&CurrWk), then a #Mi result is quite possible, and unavoidable (depending on your outline).
-
Substitution variable in Dynamic Calc
Hi,
We are using Essbase 9.3.0 on Windows and are seeing this behavior in our BSO cubes.
When we use a substitution variable in a Scenario member with Dynamic Calc (not store) setting, after the first retrieve, if we change the value of the substitution variable, the subsequent retrieves do not generate updated results.
I suspect that the value is cached in the Dynamic Calculator Cache, and for some reason does not track changes in Substitution Variables to know that the value must be re-calculated. Here is what I see in the Application log -
[Mon Aug 09 10:31:51 2010]Local/App1/db1/user1/Info(1020055)
Spreadsheet Extractor Elapsed Time : [0.032] seconds
[Mon Aug 09 10:31:51 2010]Local/App1/db1/user1/Info(1020082)
Spreadsheet Extractor Big Block Allocs -- Dyn.Calc.Cache : [4] non-Dyn.Calc.Cache : [0]
This says that 4 blocks were used from the Dynamic Calc Cache, and none from outside it. Does this mean that existing blocks were read and not re-populated?
If I make a change to the formula, wherein I hard code the value of the sub var and perform the retrieve, then the value is updated. Subsequent retrieves, after restoring the formula still returns the updated results.
My question is, is this expected behavior? Or am I doing something /reading something wrong?
Thanks,
Andywhen a subst variable value is changed... to use the value in member formula or calc script, the concerned application has to be restarted...
- Krish -
DATACOPY from Dynamic Calc Member not working
Hello,
I have a BR to Copy from one Scenario to another. I let the user chose the Scenario via RTP. When they chose a dynamic calc scenario no data is copied.
Here is the Rule
SET CREATENONMISSINGBLK ON;
SET COPYMISSINGBLOCK ON;
FIX(Dec, "Daten brutto", "Daten_brutto_P_M")
DATACOPY [TEBIT_COPY_Year_Source]->[TEBIT_COPY_Scenario_Source]->Final TO [TEBIT_COPY_Year_Target]->[TEBIT_COPY_Scenario_Target]->Version_1;
ENDFIX
I fix on some specific Members an then copy from a specific Year->Scenario combination the Final Version to another Year->Scenario combination Version_1. Doing this with a store Scenario works, with a dynamic calc Scenario it doesnt.
Thx for your Help.Kevin,
Unfortunately, I think this is the way it works. DATACOPY will not copy dynamically calculated members to stored members.
Although it is not in the DATACOPY Tech Ref documentation, that's the way it works.
Here are some older threads on the "other" board:
http://www.network54.com/Forum/58296/thread/1184768427/DATACOPY+Help
http://www.network54.com/Forum/58296/thread/1054220911/Datacopy+Problem
You are going to have to come up with another way of copying the Scenario by summing the members into the target Scenario. It can be a pain because you're going to have to mind the creation of the blocks. SET CREATEBLOCKONEQ will be your friend on this one.
Regards,
Cameron Lackpour
Maybe you are looking for
-
Installing Java Stack - Netweaver 7.0 EHP1
We currently have our ERP system installed (ECC6) and i am planning to install the Java stack on a separate server for portal and ADS. I was at the Service Marketplace to download the installation files and was wondering what is all needed. I have
-
How to get podcasts onto my ipod so I can see what's going on?
Hi, My G3 15GB ipod with version 2.3 on it... My podcasts sync over from itunes OK. But by the time they get onto my iPOD its really hard to see what's what. The ipod shows a "Podcasts" playlist. But really they are not presented in an elegant way. W
-
Oracle ODBC - Internal Error - unable to initialize NLS during driver load
I'm having some trouble with my ODBC connections which I hope someone can please help me with! About 6 weeks ago all was working as normal. As far as I know there have been no updates to the ORacle DB, the Windows XP operating system or the ODBC Driv
-
On my MACbook pro retina display, OS X, I'm having a problem when running PHOTOSHOP CS6 extended where the spacebar doesn't move the selection of the marquee tool. I've deleted the preferences file and also reset tool(all) but to no avail. I've als
-
Purchase requisition creation date ...
Our auditor want to know the creation date of purchase requisition , i have check table CDHDR ... using Object value <PR NUMBER> and using BANF, it only display change history only ... where can i find creation date of PR ?