Trouble with logging into my router

I'm running a MI424-WR rev f router and when I log into 192.168.1.1, I can enter the admin login name, but I cannot enter the password. For every letter I type, at least two characters appear. I used to be able to copy and past the password into the form, but now that doesn't work, either (it adds another character).
This happens with every browser I have (chrome, safari, firefox, and camino). Anyone else seen this?
thanks!
-M

You can ignore the number of characters displayed. This is a security feature that is suppose to confuse any one watching over your shoulder as to how long your password is.
Password should default to matching the serial number displayed on your router. The router when reset may use "password" as the password and installers use to change it to "password1"

Similar Messages

TS1398 Is anyone else having trouble with logging into some previously accepted WiFi networks after downloading iOS6?

Since I downloaded iOS6, I can login to my personal WiFi, but one network that I had joined a long time ago reflects a connection without connecting to WiFi. When I checked the settings to reinsert my password, it appears as if I'm connected, however, subsequent to that it takes me to a blank page on apple.com and kills the connection. Has anyone else had this experience?

reading other threads:
My solution is not working in general. It seem to be that iOS6 changed something in portforwarding with UPnP
and in my special case with an "AVM FRITZ!Box WLAN" router, it was a workarround to weak the WLAN security.
In other cases with "Netgear" routers older firmware will work with iOS 6.0
So maybe you can find a solution for your own router or wait maybe a week (I'm sure)
until apple will publish iOS 6.1 or iOS 6.0.1
This situation is teaching again, let test other users null versions one week and then update.
BUT YEAH I wanted iOS6 and solving the problem with the network, I can tell you there are great improvments in it.

Trouble staying logged into websites

It seems that after updating to Yosemite and Safari 8, I'm having trouble staying logged into some sites such as Facebook and Netflix. I have the "keep me logged in" button checked too. After a couple minutes or so of browsing or watching an episode, it automatically logs me out. I even tried clearing the Cache on Safari but that didn't help.
PS. Trying to post this thread, it told me that I was logged out. :/

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Lion Ichat client issues with logging into SL Ichat server

We run the iChat server on our OD master running 10.6.8. We have about 250 users and it's working great for everyone on Leopard or SL (the majority of our users).
We just started upgrading people to Lion, as well as getting some new lion machines. The people who are on Lion Pre-Configured machines seem ok, but the people who we upgrade are having issues with logging into it. Sometimes it will work just fine, and other times they just can't log in. They get the ~ symbol by their status and can't connect to the server.
The only fix seems to be trashing their prefs AND rebooting, just trashing them or just rebooting don't seem to be enough to fix this. Anyone seen or have a better fix for this? It has happened more than once for the same user.

Same problem here [https://discussions.apple.com/message/23114338#23114338].
Were you ever able to troubleshoot or fix this? File a bug report?

Issue with logging into my WRT54GX-v2

hey i need to log onto my router to take my ps3 out of the firewall, but when i log onto it i get this(see image below) there's no txt in the fields or tabs its pretty much a blank page
my linksys router model is :WRT54GX-v2
my isp is : cox
i dont know what brand the cox modem is (theres no name on it) but the model number is: u10c018
i need to get into the DMZ section to fix my ps3 network problems, what is my router doing? why does it look like this? why cant i click on anything, i dont know what this kind of issue is called
i might add that i can connect to the internet fine..
http://img.photobucket.com/albums/v505/tuxedokman/Picture1-2.png (direct link to a screen shot)

To view the router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Trouble with split into clips when importing from camera

I'm importing old video from mini DV tapes into iMovie. Unlike many other people writing here, I'm not having trouble with the connection between the camera and the computer. That works fine. I click "import" and the video IS imported.
The problem is, iMovie splits up the video it loads into little clips, some are long and some are less than a second long. Then, when it displays them in the clips window, they are out of order. For instance, the first few bars of a song might be pulled off and be in a short clip near the bottom of the list while the rest of the song is in a longer clip near the top. As a result, I am forced to carefully put them back in order -- like making a jigsaw puzzle -- as I drag them into the project.
Can I either turn off whatever it is that splits the input into clips (I'd like just one big clip) OR at least could the clips be displayed in the order that they were loaded from the camera so that clips that belong together are next to each other?
Thanks (and sorry for asking what is PROBABLY a dumb question),
ak

The best answer I've found so far to my own question is the post from Randman here:
http://discussions.apple.com/thread.jspa?messageID=9007098
As he points out, the problem is that iMovie is splitting and ordering the clips by their "time stamp", but if the video was previously edited (even by iMovie itself!) this time stamp may reflect the time it was edited rather than the time it was filmed. This is especially a problem for clips that have a title or special effect used on PART of it, because the modified part does not show up anywhere near the unmodified part in the list of clips.
Randman ALSO provides a sort of solution: rename the files themselves. I found this did work. (You rename them so that time stamps in the filename are in increasing order when listed in order by "last modified" which reflects the time they were loaded from the camera!)
I've written myself a script to do this automatically, but it is a bit of a hack and not really suitable for distribution. But, I suggest that someone with more time and programming experience than I write such a script that would help people with this problem!

Issue with logging into samples

Hi ,
When I open the enterprise sample , and enter the user id and password , I am not being logged into the portal server.Instead a the same screen again shows up.So as a workaround , I have to change the url from "\portal\dt" to "\amconsole".Then it shows logged in user as "mary".Now i again I replace "\amconsole" with "\portal\dt" . Now it logs me in.
How can I overcome this issue?
Thanks and Regards,
Vivek

Try setting the "Default success Login URL" of Enterprise sample org to http://portal machine:port/portal/dt
Default success Login URL can be found at :
1. Login to amconsole
2. click on enterprisesample organization
3. select services for this organization
4. click on "core" and on the Right hand frame, you will find "Default success Login URL"
5. remove whatever was this in that textarea, and add http://portal machine:port/portal/dt
Edited by: SiddeshKamath on Mar 16, 2008 7:02 AM

Problems with logging into Muse and so to CCloud

Alternatively I cannot log into my Creative Cloud Account on my desktop or my laptop. Muse seems to be the problem. This already happened twice. I dumped Muse into the trash and emptied it. This was the solution the help desk gave me a few weeks ago. I had then to remove a .db file, but I forgot which one. Anyway, when trying to download another version of Muse I get the the message that I already have it, the download button is blanked out. Bother! Does anyone have this problem as well??

Moved from the Creative Cloud to the Muse forum. They will be able to help you here.

Issue with logging into Presentation Services

No luck fixing my issue using the search function.
Administrator/Administrator or a blank password are not working. In NQSConfig.INI I set AUTHENTICATION_TYPE = BYPASS_NQS; but still cannot get into presentation services. Where do define/set the password here?
I tried to uninstall/reinstall and get prompted for the oc4jadmin password which i also do not have.
Edited by: cisGuy on Aug 16, 2010 10:12 AM

Yes, i was then able to uninstall OBIEE and reinstall by resetting the oc4jadmin password. However upon installation and before reboot, i was able to log into Presentation Services as Administrator/Administrator. However once i rebooted and started all services, i can get to presentation services login screen but the same credentials give me an invalid user/pass error message.
What is going on here? All services are running:
Oracle Java Host
Oracle Presentation Services
Oracle BI Server

I'm having trouble with logging in on Premiere Elements 8.

I'm on my Lenovo Thinkpad X200 Tablet, running Windows 8 Pro.
I just installed Adobe Premiere Elements 8 on it, perfectly fine. But, when I log in, it will bring up this screen:
But when I fill everything in, it says that an error has occured and my data was not saved.
What should/can I do?

Nelsonator
The frustrating part about this particular update is that Adobe did not provide for any "8.0.1" to show on the Welcome Screen or anywhere else after installation. The user is left with a message at the end of the download and install mentioning successful completion.
One of the actions of the 8.0.1 Update is to turn off the automatic background rendering in preferences. So one sign that the update is installed is finding no check mark next to the background rendering option in Edit Menu/Preferences/General. Unfortunately this 8.0.1 does not turn off the AutoAnalzyer which you have to do yourself in the Elements Organizer interface.
You can download and install that 8.0.1 Update with Premiere Elements 8.0/8.0.1 closed. But the easier route is via the Premiere Elements 8 workspace Help Menu/Updates. But, if you cannot get into the program, so much for that alternative.
If you have Premiere Elements 8 closed, what is the specific problem with downloading the 8.0.1 Update from the Adobe link provided and installing it to your computer?
Without the 8.0.1 I found the program unusable. With it, it is a great program.
Back to the issue at hand, that screenshot message...I have gotten them out of the way by cancelling out without entering anything in the fields. All you should ever have to do maybe is to enter your Adobe ID and password and not in response to that dialog. You do not want to have anything to do with photoshop.com in this instance. If you have not already, close the program. Reopen it. If the message appears, hit Cancel or X. Do not enter anything.
I have no evidence to present to suggest that the 8.0.1 Update has anything to do with getting rid of the photoshop.com leftover.
Please left let us know what is happening.
Thanks.
ATR

AAA authentication when logging into the router via the web browser

Hi group,
I am trying to get access the a cisco 2621 via http and authentication
via AAA but there is something I am not quite understand.
I am using the freeware TACACS+ server running on RedHat Linux
Enterprise Server 3.0. I setup the TACACS+ account for myself with
enable privilege on the TACACS+ box. This account, let call it,
ddt123, can telnet/ssh into the IOS router and the enable secret
is associated with this account as setup in TACACS+.
Here is my configuration looks like on the TACACS+ file:
[root@dca2-LinuxES tacacs]# more tac_plus.cfg
accounting file = /var/log/tac_plus.log
key = zFgGkIooIsZ.Q
user = ddt123 {
member = admin
name = "ddt 123"
login = cleartext "exec123"
user = $ddt123$ {
member = admin
name = "ddt 123"
login = cleartext "privi123"
group = admin {
default service = permit
[root@dca2-LinuxES tacacs]#
Here is my configuration on the IOS device:
aaa authentication login notac none
aaa authentication login VTY group tacacs+ local
aaa authentication login web local enable
aaa authentication enable default group tacacs+ enable
aaa authorization console
aaa authorization config-commands
aaa authorization exec notac none
aaa authorization exec VTY group tacacs+ if-authenticated none
aaa authorization commands 0 VTY group tacacs+ if-authenticated none
aaa authorization commands 1 VTY group tacacs+ if-authenticated none
aaa authorization commands 15 VTY group tacacs+ if-authenticated none
aaa authorization network VTY group tacacs+ if-authenticated none
aaa accounting exec VTY start-stop group tacacs+
aaa accounting commands 0 VTY start-stop group tacacs+
aaa accounting commands 1 VTY start-stop group tacacs+
aaa accounting commands 15 VTY start-stop group tacacs+
aaa accounting network VTY start-stop group tacacs+
aaa accounting connection VTY start-stop group tacacs+
tacacs-server host 192.168.15.10 key ***
ip http server
ip http authentication aaa login-authentication VTY
line con 0
exec-timeout 0 0
authorization exec notac
accounting commands 0 VTY
accounting commands 1 VTY
accounting commands 15 VTY
accounting exec VTY
logging synchronous
login authentication notac
line vty 0 15
exec-timeout 0 0
authorization commands 0 VTY
authorization commands 1 VTY
authorization commands 15 VTY
authorization exec VTY
accounting commands 0 VTY
accounting commands 1 VTY
accounting commands 15 VTY
accounting exec VTY
login authentication VTY
The question I have is that when I open the browser and enter http://router_IP_address,
the it prompts me for authetication, which password should I use, "exec123" or "privi123"?
Can someone explain to me how this work, and if it works at all? Thanks.
David

here is the "debug aaa authen" and "debug aaa author" on the router:
C2621#term mon
C2621#
Feb 25 23:11:33.967 UTC: AAA/AUTHOR/TAC+: (3081244823): send AV cmd-arg=monitor
Feb 25 23:11:33.971 UTC: AAA/AUTHOR/TAC+: (3081244823): send AV cmd-arg=
Feb 25 23:11:34.183 UTC: TAC+: (-1213722473): received author response status = PASS_ADD
Feb 25 23:11:34.187 UTC: AAA/AUTHOR (3081244823): Post authorization status = PASS_ADD
Feb 25 23:11:34.187 UTC: AAA/MEMORY: free_user (0x8276F8AC) user='ddt123' ruser='C2621' port='tty66' rem_addr='192.168.15.1' authen_type=ASCII service=NONE priv=0 vrf= (id=0)
Feb 25 2007 23:11:36 UTC: %SEC-6-IPACCESSLOGP: list 111 permitted tcp 192.168.15.10(49) -> 192.168.15.1(24127), 1 packet
Feb 25 2007 23:11:38 UTC: %SEC-6-IPACCESSLOGP: list 111 permitted tcp 192.168.15.10(49) -> 192.168.15.1(14840), 1 packet
Feb 25 23:11:39.248 UTC: AAA/AUTHEN/LOGIN (00000000): Pick method list 'VTY'
Feb 25 23:11:39.268 UTC: AAA/AUTHOR (00000000): Method=None for method list id=A0000003. Skip author
Feb 25 2007 23:11:40 UTC: %SEC-6-IPACCESSLOGP: list 111 permitted tcp 192.168.15.10(49) -> 192.168.15.1(36781), 1 packet
Feb 25 2007 23:11:41 UTC: %SEC-6-IPACCESSLOGP: list 111 permitted udp 192.168.4.10(2537) -> 192.168.15.1(161), 1 packet
Feb 25 23:11:42.553 UTC: AAA/AUTHEN/LOGIN (00000000): Pick method list 'VTY'
Feb 25 2007 23:11:43 UTC: %SEC-6-IPACCESSLOGP: list 111 permitted tcp 192.168.15.10(49) -> 192.168.15.1(19535), 1 packetu
All possible debugging has been turned off
C2621#
Feb 25 23:11:46.552 UTC: AAA: parse name=tty66 idb type=-1 tty=-1
Feb 25 23:11:46.552 UTC: AAA: name=tty66 flags=0x11 type=5 shelf=0 slot=0 adapter=0 port=66 channel=0
Feb 25 23:11:46.552 UTC: AAA/MEMORY: create_user (0x8276AD88) user='ddt123' ruser='C2621' ds0=0 port='tty66' rem_addr='192.168.15.1' authen_type=ASCII service=NONE priv=0 initial_task_id='0', vrf= (id=0)
Feb 25 23:11:46.556 UTC: tty66 AAA/AUTHOR/CMD(1541751897): Port='tty66' list='VTY' service=CMD
Feb 25 23:11:46.556 UTC: AAA/AUTHOR/CMD: tty66(1541751897) user='ddt123'
Feb 25 23:11:46.556 UTC: tty66 AAA/AUTHOR/CMD(1541751897): send AV service=shell
Feb 25 23:11:46.556 UTC: tty66 AAA/AUTHOR/CMD(1541751897): send AV cmd=undebug
Feb 25 23:11:46.556 UTC: tty66 AAA/AUTHOR/CMD(1541751897): send AV cmd-arg=all
Feb 25 23:11:46.556 UTC: tty66 AAA/AUTHOR/CMD(1541751897): send AV cmd-arg=
Feb 25 23:11:46.556 UTC: tty66 AAA/AUTHOR/CMD(1541751897): found list "VTY"
Feb 25 23:11:46.556 UTC: tty66 AAA/AUTHOR/CMD(1541751897): Method=tacacs+ (tacacs+)
Feb 25 23:11:46.560 UTC: AAA/AUTHOR/TAC+: (1541751897): user=ddt123
Feb 25 23:11:46.560 UTC: AAA/AUTHOR/TAC+: (1541751897): send AV service=shell
Feb 25 23:11:46.560 UTC: AAA/AUTHOR/TAC+: (1541751897): send AV cmd=undebug
Feb 25 23:11:46.560 UTC: AAA/AUTHOR/TAC+: (1541751897): send AV cmd-arg=all
Feb 25 23:11:46.560 UTC: AAA/AUTHOR/TAC+: (1541751897): send AV cmd-arg=
Feb 25 23:11:46.768 UTC: TAC+: (1541751897): received author response status = PASS_ADD
Feb 25 23:11:46.772 UTC: AAA/AUTHOR (1541751897): Post authorization status = PASS_ADD
Feb 25 23:11:46.772 UTC: AAA/MEMORY: free_user (0x8276AD88) user='ddt123' ruser='C2621' port='tty66' rem_addr='192.168.15.1' authen_type=ASCII service=NONE priv=0 vrf= (id=0)no
Feb 25 2007 23:11:47 UTC: %SEC-6-IPACCESSLOGRL: access-list logging rate-limited or missed 976 packets
C2621#
David

Laptop cannot log into WRT120N Router, but ipad can...

Confused about this one....
I connect to several different routers at 192.168.1.1 and the WRT120N stops me at the user/password screen.
I thought it was a router problem - so I flashed newest firmware to the unit...(yes - I was able to get into the boot loader screen on the unit) and then after upgrading, was stopped with the user name and password just not letting me past....
Then I used the setup CD - it configured the router and left a text file on the desktop with the configuration settings....those settings would not allow the laptop (using both Firefox and IE) to get past the login pop up.
I then tried access by using an ipad....got right into the setup screen of the router....
So - what is it on the laptop that does not allow access to the 120N router - but access to other routers....(ie the address is not blocked by a firewall)???
Open to suggestions....
B

I’ve read an article that this is common in the old firmware version and they strongly advised to perform a firmware upgrade. Before doing an upgrade, you need to reset the router button for exactly 10 seconds. Check out this link: http://kb.linksys.com/Linksys/GetArticle.aspx?docid=9af8f4ff4b7940fab9142139d06e471a_Unable_to_reset...

I'm having a problem with logging into a FileVault-protected user account after restoring from Time Machine backup.

Hi all,
My computer had been running really slowly for a while, so I decided to erase the whole hard drive and reinstall the operating system, and then I was going to restore the files I cared about from Time Machine. The main account, which had all my documents and photos, was FileVault-protected. The last thing I did before erasing the hard drive was to run one last Time Machine backup. As far as I remember, I always ran Time Machine backups with the FileVaulted user logged in.
I don't remember whether I was using FileVault 1 or 2. I had been using FileVault 1, but I installed Lion as soon as it came out and I thought I had migrated to FileVault 2 at that point.
Once I erased the hard drive and reinstalled the operating system, I browsed the Time Machine disk and, within the Users folder, there was no folder for the main user account. When I tried to reinstall everything by restoring from Time Machine backup, I'd get the option for all the user accounts, but when I tried to log in with the main one I'd get the dreaded "You are unable to log in to the FileVault user account "User" at this time. Log in failed because an error occurred." Finally, when attempting to restore from the Time Machine backup again, I noticed something strange: After the computer got to about 10% done restoring, it declared itself completed successfully and rebooted.
I've tried a number of tips that came up from questions about similar issues on the Apple support forum, but had no luck. Is there any way to get these files back? Did they ever even get backed up?
Thanks.

Hroodbwai wrote:
I can't find it! not sure what's going on but the only folder shown is the " Shared" folder.
Did you have only the one user account? If there were others, they should also be in the "Users" folder. You probably won't have access to the files inside them, but they should be there.
From what can make out, it looks like it's not backed up any of the files for the filevault account. Can't see user folder when looking through previous backups in Time Machine galaxy view.
Are you doing that from a Finder window set to your internal HD, or your computer name? It should look something like this (with the Finder in List view):
|
|
I'd been logging out and backing up manually on a regular basis.
Scheduled backups should run normally; but they won't back up the File Vault sparse bundle, nor will any run manually.
The only time it's backed-up is when you actually log out.
You should have seen this window on logout:
|
|
followed by this one:
|
|
If you didn't see the second one, or cancelled it, the account wasn't backed-up.

Trouble with logging off and back on, Windows XP

This doesn't quite seem to go here, but none of the sub forums seemed really appropriate.
I've had Windows XP installed on my Macbook for about a month now. I recently noticed that if I log off my user account, my computer will freeze up as it tries logging back in.
If I put the computer to sleep, it will log back in fine; it only seems to occur if I go Start>Log Off
Any ideas what the issue is?
~Lyssa

There is a discussion group for Boot Camp. Search in that group for answers, this has been covered before.
Remember you are not only using beta software you are using it to install Windows.
Before heading off in a great search in the Boot Camp discussions... Be absolutely certain that you have WinXP (Pro or Home) with Service Pack 2 (SP2) installed. While in WinXP right click on "My Computer" and select "Properties", it will tell you if this is true.
Some folks have resorted to unpacking the driver file & installing each one at a time. The drivers can be unpacked using a command line switch. I don't remember the exact syntax - but a quick search in the Boot Camp discussion group should bring you the answer.
Good luck! And remember... BACK UP your OSX data!
Steve

Trouble with setting up my router...

I've set up plenty of routers in my life, i've built plenty of computers as well, my knowledge of computers and networking isn't that bad you can say. I was setting up my girlfriends router and was having trouble getting an internet connection. When the modem was hooked up to her computer it was fine, and a website could be accessed. When it is plugged in through the router, you can't access a website. The computer is detecting the connection (Local Area Connection 2 is plugged in) but the interent connection is not being detected. Any suggestions. To avoid this: all wires are assembled correctly! Thanks =)

I have the same problem here as described above...my router is the linksys wrt150N and my service provider is cox cable...my wireless adapter is intel WiFi link 4965AGN, while the regular connection is through realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.0).
thanks for any solution you can provide...
DC

Trouble with logging into my router

Similar Messages

Maybe you are looking for