Trouble with port forwarding, DHCP, VUZE, and downloading speed.

I am using Vuze to download things. I have a slow download speed and yellow smiley face, indicating a NAT problem. I think I need to implement a port forwarding, but that requires a static IP address. My router and security is set up such that I CANNOT connect to the internet using a manual configuration--DHCP only. However, I always have the same IP address. This is because the wireless router--a Motorola SB900--will only recognize approved computers designated by the IP address.
Can anyone advise on what to do next?

Enmnm wrote:
I am using Vuze to download things. I have a slow download speed and yellow smiley face, indicating a NAT problem.
Here are two links that will rate your connection.
http://www.speedtest.net/
http://www.pingtest.net/
You can try downloading directly from the terminal to see how fast one file downloads.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ mkdir test
mac $ cd test
mac $ curl "http://www.apple.com" >see
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 11292 100 11292 0 0 22628 0 --:--:-- --:--:-- --:--:-- 62623
mac $ cat see
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-us" lang="en-US">
<head>
... clipped ...
I think I need to implement a port forwarding, but that requires a static IP address. My router and security is set up such that I CANNOT connect to the internet using a manual configuration--DHCP only.
you are dealing with two networks. There is a network between your computer and your router. There is a second network between your router and your ISP.
Port-forwarding is from your router to your computer.
http://www.portforward.com/english/routers/port_forwarding/Motorola/SBG900/Azure us.htm
However, I always have the same IP address. This is because the wireless router--a Motorola SB900--will only recognize approved computers designated by the IP address.
Can anyone advise on what to do next?
You need to set Port-forwarding between your computer and your router. You will need a fixed IP address on a your Computer. There is to ways of doing this. You can set up a static IP address on your computer. A hack would be to add 10 or 20 to your IP address that your router gives out. For example if your router gives out 192.168.1.10 you of would add 10 to the ten giving 192.168.1.20. you need to make the addition to the right most number of which in the example is ten.
The section way is . . . You can have your router a signed a fixed address based on your MAC address. ( Each Internet device has a fixed address that is called the MAC address. This is a different address than your IP address. the MAC address is assigned in the factory. )
Another hack would be to Port-forward to the number your router assigned at random. If your Computer is the only computer on the router, the number should always be the same. It is a hack because this is not guaranteed.

Similar Messages

I'm having trouble with a multi channel acquisition and download with PXI-5922

I am having trouble with getting data out from both channels of a PXI-5922. My software seems to be working, but when I do the fetch there is no data for the second channel. I am using the same format for all of the channelList inputs (0,1). I've checked the instrument handles and anything else I can think of, but this is my first time trying to collect data on 2 channels of a digitizer. Any help would be appreciated.

Hi schliepe,
Try checking your code against an existing example. The
Developer Zone Example: Independent
Channel Configuration with NI-SCOPE is a good VI to reference. Also note
that there are several examples that come with the NI-SCOPE driver. They can be
found in Windows by going to Start »
Programs » National Instruments » NI SCOPE » Examples. Additionally, if you find that the examples are not working either, verify that both channels are functioning by running the
NI-SCOPE Soft Front Panel.
Please post back if you have any questions. Have a great
day!
Ryan D.
District Sales Manager for Boston & Northern New England
National Instruments

I'm having trouble with custom ringtones. I have downloaded the free software "makeTones" and have created some ringtones. I then copied those to Mac and played them in ITunes. My Itunes does not have a ringtone tab. I can not sync the ringtones.

I'm having trouble with custom ringtones. I have downloaded the free software "makeTones" and have created some ringtones. I then copied those to Mac and played them in ITunes. My Itunes library does not have a ringtones tab. I can not sync the ringtones (or I don't know how)! Please help.

Yes, the file extension is M4R. Does it matter where I save these files on my Macbook? I then opened them in Itunes and played them. I did find the Tones folder in Itunes but the Tones or Ringtones tab does not show up when I select Iphone (within Itunes). When I open the Tones folder in the Library, it is empty. Thanks in advance for your help.

Problem with Port Forwarding (when PPTP is up) in WRT-160N

Hi, everybody!
I'm looking for some help with Port Forwarding in my new router from Linksys. I've bought the router afew daysago, and was badly surprised when I found out that there is DD-WRT firmware is installed in it (the router was 100% NEW when I've purchased it). I have downloaded the latest original Linksys firmware file and successfully flashed it.
But I still have problem (same I had on DD-WRT firmware too) with port forwarding for my DC++ and Vuze (app for torrents): I've written port forward for ports 49151 (for Vuze) and 4000 (for DC++) to be forwarded to my desktop computer (IP 192.168.1.201) -- I've seen a post at this forum, that there could be a problem, if you forward to an IP, which is inside DHCP local zone, so I've forwarded it to .201 IP (my local DHCPzone is 192.168.1.100 - .149). But forwardind doesn't work ((
What's wrong?
My configuration:
Router IP: 192.168.1.1
PPTP (I've got it from my ISP)
IP address: 192.168.226.127
Default Gateway: 192.168.226.2
DNS 1: 192.168.1.1
DNS 2 & 3: 0.0.0.0
PPTP Server IP Address: 192.168.226.2
Username: ****
Password: ****
Single Port Forwarding:
Application name     External port     Internal port     Protocol     To IP address     Enabled
Vuze 49151 49151 Both 192.168.1.201    Checked
DC    4000 4000            Both           192.168.1.201 Checked
Solved!
Go to Solution.

As you have mentioned in your post that your ISP has provided you a PPTP connection with an IP address: 192.x.x.x. The IP address which is provided to you by your ISP is in a Private Range, and if you try to forward any ports on your router it will not work, as your ISP modem will block that port. So you need to get a Public IP address from your ISP.
As you are getting Private IP from your ISP, so this connection is called as NAT behind NAT, and your Modem is acting like a Router.
So now you have 2 options, get the Public IP address from your ISP or change the connection type.

Trouble With Port Mirroring (SG200-08)

Trouble with port mirroring.
Even though both Tx and Rx is specified, only getting half the conversation. Ping reply only for instance. And when pinging from other locations no traffic at all.
Please help
SG200-008
FW Version: 1.0.2.0
Boot Version D.3.1
Thanks

I also have problem with the mirroring of port on my SG200-08. The firmware is 1.0.6.2.
I mirror the port g1, to which my router to the Internet is connected, to the port g2 to be able to see the traffic with a Centos system running Bandwidthd connected to the port g2. The problem is that I only see the traffic coming in (downloads from the Internet) and not the traffic comming out (uploads to the Internet).
When looking at the SG 200-08 on the web interface at "Status and Statistics/Interface" and looking at the port g2, I see values for the "Transmit Statistics", but all the values are at 0 for the "Received Statisticsc" (see the attached file)
I confirmed that in "Administration/Diagnostic/Port Mirroring" is set up both Tx and Rx (it does not work either if I have Tx or Rx alone: I do not see the uploda traffic to the Internet). See the attached file.
This is very annoying as I purchased this SG 200-08 especially for this and it does not do the job porperly.
Does anybody knows a solution to this?

LRT214 Accessing Web Services with Port Forwarding & Port Translation

Good afternoon to all,
Purchased the LRT214 yesterday afternoon and it was a breeze to configure the internet settings and get back online. But after the initial configuration, I ran into some trouble getting the router to do port translation together with port forwarding.
The port forwarding setup is straighforward and works perfectly, the same cannot be said for the port translation which does not seem to work. I programmed the following,
1) external port 88 forwarded to internal port 80 for 192.169.1.12
2) external port 89 forwarded to internal port 80 for 192.169.1.13
Can someone point me in the correct direction to achieve the above?
Router Model : LRT214
Firmware Revision : 1.0.2.06
Working Mode : Gateway

Port Address Translation => Service Management
Add two Services for the port translations and then add the translations to the list. Let us know if you get any errors.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

New Customer Experience with Port Forwarding

OK, so my OpenReach Modem and HomeHub 3 were installed last week and all seemed OK at first.
A bit of background:
I'm a seasoned IT guy and have a nice network set up at home that caters for my needs (most of the time).
Without going into too much detail, I have my own DHCP/DNS server and I run a Webserver for personal use.
I have Virgin Broadband - which work most of the time.
I've also just had BT Infinity installed so I should always have Internet access no matter which ISP is having issues.
I was hoping to be able to access my webserver externally from either my BT or Virgin. I didn't think this would be an issue.
It still all works fine through my Virgin connection. I use dynamic DNS (no-ip.org) to get to my server.
On the Virgin Superhub - I have DHCP switched off and all my machines (except one at the moment) get the Virgin router assigned as the Internet gateway (via my own DHCP server).
My test machine gets a the BT HomeHub 3 assigned as the Internet gateway (also from my own DHCP server) and I have switched off DHCP on Home Hub.
Before I move onto my issue, I have to say that the above network setup works flawlessly.
The Virgin Router is on 192.168.0.1, The Home Hub is on 192.168.0.2. (subnet 255.255.255.0)
They are on the same network but because DHCP it switched off on both routers - everything is happy.
I can access my Server from the Internet via my no-ip.org address and it all works great.
The issue:
I thought it would be relatively simple to configure the BT Home Hub 3 to access my server from the Internet.
Hmmm. Port Forwarding seems to be the issue. It just doesn't work reliably enough. Sometimes it works, then sometime it stops working. Right now it's not working.
At first I though it was just me, not configuring it correctly. But no.
Then I started reading this forum and found there are reports of issues with port forwarding going back a year.
I don't know if that a good or bad thing - an issue running that long must be on the verge of getting fixed right?
Or any issue running that long without resolution probably has no simple resolution or just isn't a priority (for BT) maybe.
My Question:
(and I think I already know the answer)
Has anyone got a sure fire way of configuring the HomeHub3 so the port forwarding works?
Or should I just throw in the towel now and buy a Dual Wan Router?
One last note:
This morning my Infinity Broadband Speed dropped from
38Mb down/6Mb Up (measured several times yesterday)
to
0.7Mb down/0.3Mb Up (yes those decimal points are in the right place)
And I haven't got a clue why.
I power cycled the HomeHub and it returned to normal. Does this happen to other people?
Cheers
Graeme.
Graeme

Bullitt wrote:
the port on your network is defined by lan ip address and port number eg 192.168.1.10:80
you cannot forward this outbound port twice
There is no "port on my network" A port is associated with a IP address not a network.
My webserver listens an port 80 - requests from the Internet for http are port forwarded by the router (either BT Homehub or Virgin Superhub) to port 80 at address 192.168.0.5 (in my case).
If I am trying to access my webserver from the Internet, I point my browser at the WAN IP address of my router (again it doesn't matter which one - BT or Virgin) and the router port forwards the request to my Webserver. Each router can do this independently.
"you cannot forward this outbound port twice"
As explained above - It's an inbound port not an outbound port.
I appreciate you are trying to be helpful but just telling me something is not possible without explaining why its not possible doesn't really help me.
As I said before, this was working fine, then it stopped working but only when trying to access my webserver via the BT Router. It still works fine from my Virgin Router. I used WireShark and port mirroring on my switch to prove that the Home Hub as stopped port forwarding inbound traffic to my webserver.
This is a problem with port forwarding on the Homehub, not my network setup. Looking at other posts on this forum - I'd suggest I'm not the only one having problems.
To be honest, it's the least of my problems with the HomeHub right now. I'm far more concerned with the fact that twice today I've had to power cycle it because the throughput has dropped from 38Mbit-down/6Mbit-up to <1Mbit-down/<1Mbit-up. It's a known problem, BT are working on it, yet I still am paying full price for a product that should never had made it out of Beta test.
Graeme

HELP!! asa 5505 8.4(5) problem with port forwarding-smtp

Hi I am having a big problem with port forwarding on my asa. I am trying to forward smtp through the asa to my mail server.
my mail server ip is 10.0.0.2 and my outside interface is 80.80.80.80 , the ASA is setup with pppoe (I get internet access no problem and that seems fine)
When I run a trace i get "(ACL-Drop) - flow is deied by configured rule"
below is my config file , any help would be appreciated
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISPDsl
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_SMTP
host 10.0.0.2
access-list outside_access_in extended permit tcp any object server_SMTP eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network server_SMTP
nat (inside,outside) static interface service tcp smtp smtp
nat (inside,outside) after-auto source dynamic any interface
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:c5570d7ddffd46c528a76e515e65f366
: end

Hi Jennifer
I have removed that nat line as suggested but still no joy.
here is my current config
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISP
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_Mail
host 10.0.0.2
access-list outside_access_in extended permit tcp any object Server_Mail eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network Server_Mail
nat (inside,outside) static interface service tcp smtp smtp
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f3bd954d1f9499595aab4f9da8c15795
: end
also here is the packet trace
and my acl
Thanks

Problem with Port Forwarding in WRT320N

Good day.
I have a web-server and Internet-radio translator to local network of my provider. And I found a problem with Port Forwarding. I'm trying to setup 80 & 8000 ports to forward. And it's working but only for Internet, without provider's local network. My web-server isn't accessible in local network and radio-translator too.
So is it possible to forward ports absolutely - for any type of connections?
P.S. DMZ is working like Port Forwarding.

If you ask questions you have to mention that you have an PPTP connection to the internet and another network directly on the internet port. Otherwise noone will really understand your question as it is a very unusual setup.
Your setup is not one really supported by the router. You are lucky that it works but don't expect too much. Port forwarding only the internet connection. If you use PPTP the network on the internet port is basically hidden. Using that local network on the internet port is not supported.
The DMZ host is the IP address to which all ports are forwarded to which are not forwarded otherwise. The same restriction applies here.
I would recommend to ask your ISP which router they recommend for their internet connection. I think most/all Linksys routers and many other brand's consumer routers won't really support a setup like yours...

Having trouble with the iOS 8.1.1 download. Very slow. Just keeps saying preparing update for about 4 hours now. Help

Having trouble with the iOS 8.1.1 download. Very slow. Just keeps saying preparing update for about 4 hours now. Help

Hello there, Cmm405.
If you're updating your iPad with an over-the-air iOS update, the following Knowledge Base article offers up some practical steps for troubleshooting some of the issues that can arise:
Resolve issues with an over-the-air iOS update - Apple Support
In your instance, these sections may prove particularly useful:
Download takes a long time, or you can't reach update server
iOS updates require a persistent Internet connection, and the time it takes to download the update will vary according to the size of the update and your Internet speed. You can use your device normally while downloading the iOS update, and iOS will notify you when you can install the update. To improve the speed of the download, avoid downloading other content.
If you get a message that "an error occurred downloading iOS," try again later. If the issue persists, try updating your device in another network or use iTunes to update your device. Learn more about iOS updates.
Update does not complete
If you're installing the update and the progress bar appears to move slowly, be patient. The time an update takes depends on the size of the update and the number of files on the device.
When you're updating over the air, keep your device connected to a power source so that it doesn't run out of power. If your device does run out of power, connect it to a power source and turn on the device to let the update or restore complete.
If the update never completes and the progress bar hasn't moved for an extended time, try restarting your device. If you still see the issue after you restart, see what to do if your device appears frozen or won't start.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

Trouble with Adobe CC desktop app and account

Hi. I'm having trouble with my Adobe CC teacher and student subscrition and the Adobe CC desktop application. On my Macbook, adobe CC desktop application doesn't recognize my adobe subscription, but on the Adobe web site page there is my account page and i see the FREE subscription and the Premium, correctly paid. I try to uninstall the Adobe CC desktop app and to logout of adobe cc folder, but when i reinstall the desktop app, it recognize the free subscription and not the Premium. Someone could help me, please?

Lo Zerba for information on how to resolve the connection error preventing your membership from being validated please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html.

Updated iphone 5 to iOS 6.1.3, now trouble with keyboard not responding correctly and screen zooming in by itself...

updated iphone 5 to iOS 6.1.3, now I am having trouble with keyboard not responding correctly and screen zooming in by itself...
Buttons pressing themself...
Also, my main screen is permanently zoomed in...
suggestions?

Double tap the screen with THREE fingers, that should get it back to normal again.
Then go into Settings > General > Accessibility > Zoom > OFF.
Not too sure about the keyboard and random button presses though. Back it up and restore from iTunes, see if that fixes it.

HELP. 3 years ago I purchased cs3. I had troubles with registering the serial number and used my university's suite instead, and (stupidly) did not sort it out. I am now wanting to subscribe to the online creative cloud with my cs3 discount. Is there any

HELP. 3 years ago I purchased cs3. I had troubles with registering the serial number and used my university's suite instead, and (stupidly) did not sort it out. I am now wanting to subscribe to the online creative cloud with my cs3 discount. Is there any way to find / prove that I had purchased cs3 and locate a serial number? On my Adobe account it does not show my purchase of cs3 (I am guessing because of the trouble with registering my serial number). I have moved house 3 times since the purchase and am unable to locate the packaging or disk. Is there any way to prove my purchase without any serial number or showing under my Adobe account? Please help! Thanks

The CS3 discount offer is only for retail online product, it does not include education or volume license purchases. Refer to Terms and Conditions | Adobe
To check whether you had retail CS3 purchase, we need proof of purchase as well as serial number, without which the issue can not be resolved.
Regards
Rajshree

Having trouble with momentary delays while scrolling and typing, new problem that seems to be getting worse every day. Mouse?

Having trouble with momentary delays while scrolling and typing. It's a new problem that seems to be getting worse every day. Mouse? Internet connection? It's driving me nuts!

Hi
Did you find a solution ?
I have the same problem on my iPhone 4

Trouble with port forwarding, DHCP, VUZE, and downloading speed.

Similar Messages

Maybe you are looking for