Trouble with SQL Query Tool on Leopard

I have been following the lessons in Ben Forta's book Adobe
ColdFusion 8 Getting Started, and have installed the SQL query tool
in my Mac and have installed the sql folder in
http://localhost:8501/db/ows/sql/index.cfm
When I try to open the file in the browser, I get a 404 error: File
not found: /db/ows/sql/index.cfm
Have tried rebooting the computer and get the same result.
What's going on?
TIA

I have copied the full code for the error message below.
Paul D
404
File not found: /db/ows/sql/index.cfm
coldfusion.runtime.TemplateNotFoundException: File not found:
/db/ows/sql/index.cfm
at coldfusion.filter.PathFilter.invoke(PathFilter.java:89)
at
coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:175)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at
coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at
coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at
jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

Similar Messages

Benefits of SAP Business Warehouse Reporting compared with the Query-tools?

Hello experts,
I've been creating reports with SAP Query tools, but been faced with few problems. First of all, there are restricted possibilities in terms of joining tables, and thus I cannot include all the data required for the report.
One solution for this would have been to create separate queries and join the data together in Excel. The problem with this is that there exists no common field that would make sense as for a selection criterion. If the selection criterion is different in different queries, there is the danger of combining false data together, which would eventually result with distorted data.
So I was wondering, could anyone briefly tell me if SAP Business Warehouse reporting would solve these problems? And what other benefits would it provide compared with the SAP Query? I'd urgently need to know if it would be a beneficial investment for the company, since I haven't found solutions for the problems occurred in the creation of reports.
Thank you in advance for you help!
Maria

The answers are yes - and thousands of companies have gone down this route
Puttingin BW is a strategic aim of the comapny and not to be thought about and discussed in a BI forum such as this
The costs of implementation and hardware will no doubt make your eyes water.
To be quite honest SAP BI is a "no brainer" as most of the new e-SOA and new R3 modules reply on BW for their reporting needs

Report region with sql query

Hi
I have a report region with sql query. There are two regions in page. On top of page, user enters data and after that second region show enterd data which is report region
based on sql query.
Now,when this page is opned, as user had not entered any thing, report region shows "no data found" message. Is it possible to remove that message or
may i conditionally disaply report region i.e if data is inserted then only report region is dispalyed.
Thanks

>
i was trying with select count(1) in expression.
>
Just for your info, COUNT() (without any grouping obviously) with always return 1 row. If there are no result for the query then 1 row will be returned with a value of zero - so there are results returned.
Secondly, why were you using COUNT(1) rather than COUNT(*)? That is is faster is a very common misconception and not true. If you need to know how many rows have been returned, use COUNT(*). If you need to take nulls into account (ie. not include them in your count) then use COUNT(column_name) and name the column that you are interested in specifically.
Cheers
Ben

Need help with SQL Query with Inline View + Group by

Hello Gurus,
I would really appreciate your time and effort regarding this query. I have the following data set.
Reference_No---Check_Number---Check_Date--------Description-------------------------------Invoice_Number----------Invoice_Type---Paid_Amount-----Vendor_Number
1234567----------11223-------------- 7/5/2008----------paid for cleaning----------------------44345563------------------I-----------------*20.00*-------------19
1234567----------11223--------------7/5/2008-----------Adjustment for bad quality---------44345563------------------A-----------------10.00------------19
7654321----------11223--------------7/5/2008-----------Adjustment from last billing cycle-----23543556-------------------A--------------------50.00--------------19
4653456----------11223--------------7/5/2008-----------paid for cleaning------------------------35654765--------------------I---------------------30.00-------------19
Please Ignore '----', added it for clarity
I am trying to write a query to aggregate paid_amount based on Reference_No, Check_Number, Payment_Date, Invoice_Number, Invoice_Type, Vendor_Number and display description with Invoice_type 'I' when there are multiple records with the same Reference_No, Check_Number, Payment_Date, Invoice_Number, Invoice_Type, Vendor_Number. When there are no multiple records I want to display the respective Description.
The query should return the following data set
Reference_No---Check_Number---Check_Date--------Description-------------------------------Invoice_Number----------Invoice_Type---Paid_Amount-----Vendor_Number
1234567----------11223-------------- 7/5/2008----------paid for cleaning----------------------44345563------------------I-----------------*10.00*------------19
7654321----------11223--------------7/5/2008-----------Adjustment from last billing cycle-----23543556-------------------A--------------------50.00--------------19
4653456----------11223--------------7/5/2008-----------paid for cleaning------------------------35654765-------------------I---------------------30.00--------------19
The following is my query. I am kind of lost.
select B.Description, A.sequence_id,A.check_date, A.check_number, A.invoice_number, A.amount, A.vendor_number
from (
select sequence_id,check_date, check_number, invoice_number, sum(paid_amount) amount, vendor_number
from INVOICE
group by sequence_id,check_date, check_number, invoice_number, vendor_number
) A, INVOICE B
where A.sequence_id = B.sequence_id
Thanks,
Nick

It looks like it is a duplicate thread - correct me if i'm wrong in this case ->
Need help with SQL Query with Inline View + Group by
Regards.
Satyaki De.

I'm having trouble with my clone tool. When I am cloning it appears OK (the image within the brush circles is the correct colours) however once the cloning is done, it processes leaving me with a darkened blur. Any help with what's going on would be appre

I'm having trouble with my clone tool. When I am cloning it appears OK (the image within the brush circles is the correct colours) however once the cloning is done, it processes leaving me with a darkened blur. Any help with what's going on would be appreciated.

Which tool in Camera Raw, exactly? The Spot Removal Tool? Adjustment Brush?

Having alot of trouble with a query

Hey, I'm having trouble with a query for an assignment. The questions states
Find the name of the highest earning employee in each location, excluding managers, salespeople and the president
The problem I'm having is that my query returns the highest earning employee from each location perfectly, but one of those returned is a salesperson, so the next highest earning person in that location should be returned.
We are also not allowed to create a temporary table
Here's my code so far
select
e.first_name,
e.last_name,
e.salary,
l.regional_group
from employee e
inner join department d
on d.department_id = e.department_id
inner join location l
on l.location_id = d.location_id
where e.salary = (select max(e2.salary) from employee e2
inner join department d2
on d2.department_id = e2.department_id
inner join location l2
on l2.location_id = d2.location_id
where l2.location_id = l.location_id
and e.job_id !=672;
the job_id refers to what job title they have
and here's the schema below
Schema
Any help you could give me on this would be fantastic as I have been pulling my hair out over this for the last day.
Edited by: 837562 on 17-Feb-2011 02:14

Maybe you can try the below:
with job_location as
select 1 location_id, 'loc1' regional_group from dual
union
select 2 location_id, 'loc2' regional_group from dual
department as
select 1 department_id, 'dept1' dept_name, 1 location_id from dual
union
select 2 department_id, 'dept2' dept_name, 2 location_id from dual
job_FUNCTION as
select 1 job_id, 'MANAGER' job_function from dual
UNION
select 2 job_id, 'SALES' job_function from dual
UNION
select 3 job_id, 'PRESIDENT' job_function from dual
UNION
select 4 job_id, 'REST_1' job_function from dual
UNION
select 5 job_id, 'REST_2' job_function from dual
employee as
select 1 employee_id, 'a' last_name, 100 salary, 1 department_id, 4 JOB_ID from dual union
select 2 employee_id, 'b' last_name, 200 salary,1, 5 from dual union
select 3 employee_id, 'c' last_name, 300 salary,1, 2 from dual union
select 4 employee_id, 'd' last_name, 400 salary,1, 2 from dual union
select 5 employee_id, 'e' last_name, 500 salary,2, 3 from dual union
select 6 employee_id, 'f' last_name, 600 salary,2, 3 from dual union
select 7 employee_id, 'g' last_name, 700 salary,2, 4 from dual union
select 8 employee_id, 'h' last_name, 800 salary,2, 4 from dual
select
regional_group, employee_id, max_salary
from
select e.regional_group, b.department_id, employee_id, salary, max(b.salary) over (partition by b.department_id order by b.department_id) max_salary
from
employee b,
job_function c,
department d,
job_location e
where
b.job_id = c.job_id and
b.department_id = d.department_id and
e.location_id = d.location_id and
c.job_id not in (1,2,3)
) where salary = max_salary;
"REGIONAL_GROUP"     "EMPLOYEE_ID"     "MAX_SALARY"
"loc1"     "2"     "200"
"loc2"     "8"     "800"

Trouble with my cropping tool

I am having trouble with my cropping tool. It doesnt seem to want to crop, the bar will go about a third of the way and then wont go any further and the says Photoshop not responding then I have to crtl alt delete to get out. I am a afraid to uninstall then reintall as I have a whole lot of assignments to do and cant risk it not reinstalling uggg

With the crop tool selected, try this reset:
Benjamin

Using prompts with SQL query

Post Author: wleonetti
CA Forum: Crystal Reports
Hello!
I have acquired a report from our regional headquarters, and have been asked locally to add a prompt to one that already exists in the report.
The report currently uses an SQL query, which in turn uses a single prompt to limit the data reported. However, the name of the parameter in the Field Explorer in Parameter Fields is "Facility", but, when I use the Database Expert and select edit for the query (under Selected Tables, right-click on "Command" under the database and click on "Edit Command"--is Command a default name?), under the Parameter List, the name of the parameter there is "Facility1" (?). The SQL references the parameter "Facility1" (...like '{?Facility1}'), but I cannot find any link/interface between the Parameter List "Facility1" to the Parameter Field "Facility", and I cannot find any other references to "Facility1" anywhere else in the report (sorry, I'm very new at CR, and am not sure how to do a global search of a desired text string in the reports).
I have asked the author for an explanation, but he would only offer, after indicating that he ... was not obligated to help me in any way .., the following bone: "I just simply rename the parameter in Command from Facility1 to Facility which bears the same name as the parameter interface and it just works fine." This only served to confuse me more, since the parameter name currently in Command is "Facility1" (and the report works the way it is)--when I change the name of the parameter in Parameter List (and the parameter name in the SQL query) to "Facility" (to match the Parameter Field's "Facility"?) ... the parameter in the Parameter Fields ... disappears?
Can someone please instruct me how to, in whatever steps are necessary, add a parameter to the Parameter Fields and edit the SQL code to use that parameter? or point me to some documentation that will help me with this?
Thanks in advance for any help offered.
wleonetti

Hi Eric,
Try expressing the source as this:
begin
return functionname(to_date('30-sep-2010', 'dd-mon-yyyy'));
end;That works fine for me, and if I take out the begin-end and the trailing semicolon from the return statement I get the same behavior as you.
It does mention in the help for the source (only during the wizard though) that this source type has to be expressed that way, but I agree it would be helpful if the tool would validate for this format when 'Function Returning SQL Query' is used or give some sort of indication of the trouble. Anyway, this should get you going again.
Hope this helps,
John
If you find this information useful, please remember to mark the post "helpful" or "correct" so that others may benefit as well.

Error using Database addons with SQL query.

I get a LabVIEW error when I provide the following SQL query to the NI database VI: ..vi.lib\addons\database\Connection.llb\Conn Execute.vi.
declare @SR_ID table ( script_result_id uniqueidentifier )
insert into @SR_ID
select script_result_id from SCRIPT_RESULT
where script_result.software_name = '%s'
SELECT distinct STEP_RESULT.STEP_TYPE
FROM STEP_RESULT INNER JOIN @SR_ID s ON
STEP_RESULT.SCRIPT_RESULT_ID = s.script_result_id
The error is:
Error -2146824584 occurred at NI_Database_API.lvlib:Rec Destroy - Connection.vi->Database_Query Database with flattened string reply.vi->ADUTS-RPT Query DB.vi->ADUTS-RPT Get Step Names.vi->ADUTS-RPT Top.vi
Possible Reason(s): Exception occured in ADODB.Recordset: Operation is not allowed when the object is closed.
The query works fine when given directly to my SQL server.
Any ideas on this problem would be most appreciated.

It looks like the bug is related to ADODB objects. I found a related KnowledgeBase article that was written about the same issue, but never published for some reason. Here's what it has to say about your error:
"This error occurs when a query is run on the database that does not return any recordset data, such as a delete command. In this case, when you encounter the DB Tools Fetch Recordset Data VI, the state of the recordset is "closed" and produces the error.
To avoid the error, you can check for the state of the recordset and make sure that it isn't closed. To do this, use the DB Tools Get Properties VI and check the state from the properties cluster. An additional, or alternate, check would be to check for the beginning of file and end of file properties. If both BOF and EOF are both true, there is no data in the recordset.
If you open the example program, Database Fetching, you can see that they are using both of these checks.
In versions of the toolset prior to version 1.0.2, these checks were built in. This causes code without the checks to return this error if the toolset is updated from a previous version."
Tim W.
Applications Engineering
National Instruments
http://www.ni.com/support

Strange problem with SQL query in toad.

Guys,
My colleague is up with a strange problem with an SQL query that if it is run in toad encounters the "ORA-03113: end-of-file on communication channel" problem,but if run in SQL plus executes just fine.
Do anyone have thoughts about this strange error in toad?
Thanks!!!!
Regards,
Bhagat

Not sure what version of TOAD you have but it may have shipped with SQLMonitor which montiors SQL sent from Windows apps . Navigation should be similar to;
Start~Programs~Quest Software~TOAD for Oracle~Tools~SQLMonitor
or
C:\Program Files\Quest Software\Toad for Oracle\SQLMonitor.exe
To use it, start TOAD and connect, start SQLMonitor and click the checkbox for TOAD.exe, then execute the query. SQLMonitor will show you the actual query that TOAD sent to the client. It may be exactly what you sent or it may contain some extras.

Free SQL query tool

Hi there,
Does anyone know if there is such a thing as a free sql querying only tool that will allow users to run a sql query script and will save the output on a file on thier PC ?
Thanks,
Daniel

>
Does anyone know if there is such a thing as a free sql querying only tool
that will allow users to run a sql query script and will save the output on a file on thier PC ?If you're looking for a multi-database tool, take a look at SquirrelSQL - a java tool
that will connect to any db with a JDBC driver. It also has plugins for specific
databases incl. Oracle - I've been impressed. Open Source under the LGPL.
[Edit]
Just checked, and SquirrelSQL will do just what you want. .csv .xls and .xml
Another note, if you're only using Oracle, then SQLdeveloper is hard to beat!
HTH,
Paul...
DanielEdited by: Paulie on 30-Apr-2013 14:37

Problem with SQL query region source containing OLAP clauses

Hi team,
I believe I found a bug when HTMLDB validates the SQL Query in a report region.
My query includes an ORDER BY clause within a windowing function and HTMLDB refuses to accept the source owing to the presence of the ORDER BY and the column heading sort preference.
Clearly the order-by in a window function has little to do with the column heading sort, but this error prevents me from updating the conditional display item in the page definition.
Note also that the page was imported smoothly from the 1.5 version, so probably the region source is not checked at that time, but only when you update it "manually".
So, in the end, if I don't change anything the page works because the sql query is assumed to be correct but unfortunately I need to change the condition and I cannot.
The problem shows up in page 126 of app 21670, SQL query region.
Bye,
Flavio
PS: may be I can work around this by using the pl/sql function returning the sql query.

Flavio,
We're aware of this problem. For now, your workaround is described in this thread:
HTMLDB 1.6 and "order by" in analytic functions
Sergio

Help with sql query the status of A/P Reserve Invoice

Hi,
I am trying to write a query which lists all A/P Reserve Invoice info with OPEN status.
I check the OPCH table and cannot find the rule to tell the status.
The "DocStatus" field has two values only: 'O' for open and 'C' for closed.
However, the status of A/P Reserve Invoice are OPEN, CLOSED, DELIVERED, PAID, etc.
I try to use DocStatus field to filter, but the result does not match what I see in SAP.
Could you please give me some hints about how to get the data I need? Thank you.
Best regards,
Sylvia
Edited by: csylvia on Jun 23, 2011 5:54 AM

Hi Darius,
Thanks for your reply.
However, I don't know what is the relationship between Purchase order and A/P Reserve Invoice.
Do you mean using "SELECT T0.DocEntry FROM OPCH T0, OPOR T1 WHERE T0.DocNum = T1.DocNum AND T1.DocStatus = 'O';" to query the A/P Reserve Invoice data with OPEN status?
But the result is not what I want.
The result of "*SELECT * FROM OPOR WHERE DocStatus = 'O';*" is also not.
I'd like to query A/P Reserve Invoice list with OPEN status, and I try the following sql query:
SELECT DocEntry FROM OPCH WHERE DocStatus = 'O' AND InvntSttus = 'O';
The result is close to what I need, but it's not exactly correct.
Moreover, I don't think the sql query conditions is accurate.
Please give me some advice. Thank you.
Best regards,
Sylvia

Issue with SQL Query with Presentation Variable as Data Source in BI Publisher

Hello All
I have an issue with creating BIP report based on OBIEE reports which is done using direct SQL. There is this one report in OBIEE dashboard, which is written using direct SQL. To create the pixel perfect version of this report, I am creating BIP data model using SQL Query as data source. The physical query that is used to create OBIEE report has several presentation variables in its where clause.
select TILE4,max(APPTS), 'Top Count' from
SELECT c5 as division,nvl(DECODE (C2,0,0,(c1/c2)*100),0) AS APPTS,NTILE (4) OVER ( ORDER BY nvl(DECODE (C2,0,0,(c1/c2)*100),0)) AS TILE4,
c4 as dept,c6 as month FROM
select sum(case when T6736.TYPE = 'ATM' then T7608.COUNT end ) as c1,
     sum(case when T6736.TYPE in ('Call Center', 'LSM') then T7608.CONFIRMED_COUNT end ) as c2,
     T802.NAME_LEVEL_6 as c3,
     T802.NAME_LEVEL_1 as c4,
     T6172.CALENDARMONTHNAMEANDYEAR as c5,
     T6172.CALENDARMONTHNUMBERINYEAR as c6,
     T802.DEPT_CODE as c7
from
     DW_date_DIM T6736 /* z_dim_date */ ,
     DW_MONTH_DIM T6172 /* z_dim_month */ ,
     DW_GEOS_DIM T802 /* z_dim_dept_geo_hierarchy */ ,
     DW_Count_MONTH_AGG T7608 /* z_fact_Count_month_agg */
where ( T802.DEpt_CODE = T7608.DEPT_CODE and T802.NAME_LEVEL_1 = '@{PV_D}{RSD}'
and T802.CALENDARMONTHNAMEANDYEAR = 'July 2013'
and T6172.MONTH_KEY = T7608.MONTH_KEY and T6736.DATE_KEY = T7608.DATE_KEY
and (T6172.CALENDARMONTHNUMBERINYEAR between substr('@{Month_Start}',0,6) and substr('@{Month_END}',8,13))
and (T6736.TYPE in ('Call Center', 'LSM')) )
group by T802.DEPT_CODE, T802.NAME_LEVEL_6, T802.NAME_LEVEL_1, T6172.CALENDARMONTHNAMEANDYEAR, T6172.CALENDARMONTHNUMBERINYEAR
order by c4, c3, c6, c7, c5
))where tile4=3 group by tile4
When I try to view data after creating the data set, I get the following error:
Failed to load XML
XML Parsing Error: mismatched tag. Expected: . Location: http://172.20.17.142:9704/xmlpserver/servlet/xdo Line Number 2, Column 580:
Now when I remove those Presention variables (@{PV1}, @{PV2}) in the query with some hard coded values, it is working fine.
So I know it is the PV that's causing this error.
How can I work around it?
There is no way to create equivalent report without using the direct sql..
Thanks in advance

I have found a solution to this problem after some more investigation. PowerQuery does not support to use SQL statement as source for Teradata (possibly same for other sources as well). This is "by design" according to Microsoft. Hence the problem
is not because different PowerQuery versions as mentioned above. When designing the query in PowerQuery in Excel make sure to use the interface/navigation to create the query/select tables and NOT a SQL statement. The SQL statement as source works fine on
a client machine but not when scheduling it in Power BI in the cloud. I would like to see that the functionality within PowerQuery and Excel should be the same as in Power BI in the cloud. And at least when there is a difference it would be nice with documentation
or more descriptive errors.
//Jonas

Get file name of an email attachment with sql query

Hi all,
How can I get the file name of an email attachment with a sql or pl/sql query?
Thanks in advance.
Edited by: JonasZzZz on Sep 14, 2009 10:52 AM

Hi, anynone? please..

Trouble with SQL Query Tool on Leopard

Similar Messages

Maybe you are looking for