Trouble with Streaming Video in Dreamweaver 8

Hello,
I am having trouble inserting a streaming FLV into a CFM page
via Dreamweaver. I have successfully done this using Flash 8
Pro’s FLVPlayback component. I think the problem is my
syntax, but I could be wrong.
Here is what I used in Flash that is currently working:
- contentPath: rtmp://serverIPAddress/loadTest/test.flv
Here is what I’ve been trying to do in Dreamweaver via
the GUI when choosing Insert > Media > Flash Video >
Streaming video:
- Server URI: rtmp://10.64.189.66/loadTest/myLoadTest
(Note: myLoadTest is the new instance name that I gave
loadTest in the FMS console.)
- Stream name: test.flv or test
When I do the above in Dreamweaver and try to auto detect the
dimensions of the FLV it just times out and give an error message.
I put in some values and ran the file anyway and it does nothing.
If anyone can help figure out what I’m doing wrong I
will be greatly appreciative!! :)
Thanks,
Eric

Having the same exact problem you are. One thing you might
check that I have also done to no avail, is to be sure your MIME
extensions are added to your webserver (IIS or Apache). That seems
to be a common mistake and if that doesn't help you, it will at
least tackle the next problem you might encounter.

Similar Messages

Trouble with streaming videos

Recently since the last patch i downloaded for quicktime, my internet browsers have been pretty messed up when trying to view streaming videos or anything flash like youtube videos and such.
at times, it works fine and then most of the time when i wanna see something it gives me the Q with a question mark, and i have no idea how to make it work.
please help.

You more or less answered your own question by stating the difference between your MB and your husbands. More RAM (memory) will improve the amount of video capability for your MacBook. Your model of MacBook uses shared memory for video and you really don't have enough to share for the streaming video that you're trying to watch. I would increase your RAM to the maximum of 2GB. The spinning sound that you here is probably your hard drive spinning and by increasing your RAM you will resolve this issue as well. -GDF

Problems with streaming video on Quicktime

I have been having trouble with streaming videos continuing to pause, then start playing, pause again and so on. I was wondering if there is something I have done to effect playback or if there something I can do to stop this. Thank you for any suggestions

Hello djdoo6
Welcome to discussions!
It will depend on your Internet Service.
Open / Q-Time Player / Q-Time Preferences / open Streaming section. My preference is set to Automatic, select that or known ISP speed. If you use the Enable Instant-On Drag the blue pointer to the right for more delay befor starting play. Play with this untill you download enough to start and finish videos.
Hope this helps
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.8) Maxtor 300GB FireWire 2G Nano

Problems with streaming videos and sound

Hi,
I'm having troubles with streaming videos and I also have sound issues. After upgrading to latest flash player version, everytime I stream videos on the internet (youtube,vimeo,etc.), videos are constantly freezing every 7 seconds. It is so annoying. Also, my audio does not work.
With greatest respect, I would be eternally grateful if you could help me with this.
Jelmar

Everything will be find if you follow those step
Install Window XP service pack 1 or later version
then after install flash the BIOS to V 1.4 from the one that given (1.3)
After flash then enable the Sound card feture and choose Azalia and not AC97 Then at the same time enable the USB and Lan.
Final restart again the computer. The window should detect the 3 thing. Last last install the driver from the CD given. Then everything will work out.

Problem viewing video, something about an ad blocker. I had no trouble viewing streaming video until I downloaded firefox 4

I do not have any trouble watching streaming video on the Netflix website, but all other streaming video such as on a tv network or on IMDB.com comes back unavailable or blocked by an ad blocker. The only change to my computer I have done is upgrade my Mazilla Firefox browser. Something downloaded with it maybe that is blocking streaming transmissions. I need to know how to disable or bypass the problem.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Is there an issue with streaming videos direct from itunes? I

Is there an issue with streaming videos direct from itunes? I have good wifi but films just buffer , doesn't happen on flixster on netflix , wonder if there is any tweak to watch a film uninterrupted , because it is very frustrating? Thanks

Apple appears to be having trouble with the iTunes Store servers right now.
(81070)

Trouble with HD videos on Satellite M70

HI,
I recently bought a M70-208. It seems that I experience trouble with HD video both with VLC and WMP. For example, while playing the demo video of "HDtoGo", the flow is very slow. Other non Toshiba notebook that I'm using for my job is playing this video smoothly, despite its lower configuration.
I tried different combination of Energy management, but it still the same. I can't understand what's going on.
Apart from that, this notebook makes me happy (6900 point at 3D mark05).
Thanks for helping me.

Hi
Maybe is my English not so good but what you mean under flow? Is there any kind of bucking while video plays?
Maybe some application in background occupied the CPU and because of that the video doesnt run well. Try to check it.
Anyway, as you said this unit has very good value on graphic test. Friend of mine has M70-257.
Bye

Having trouble with the video function..

I just purchased the 60GB ipod photo. I'm transferring music files easily. However, I'm having trouble with the video function. I've loaded Itunes 6, reloaded the original setup disk, and have loaded the latest updates for the unit. I can download movies from the itunes store and save them to my library, but I cant seem to transfer the video files to the ipod. Ive reinstalled itunes and the update 6 with no success. After syncing the ipod it only shows the music files even after all that Ive tried. Additionally, there is no evidence of the video function on the main menu after the update attempts. Can someone tell me what I'm doing wrong? I'm eager to get past this problem so that I can start tranfering personal movies and video files.

You Have an iPod Photo, You do NOT have a 5th Generation Video iPod. Get it? You need the 5G model to play video.
If the salesman told you it was the 5G model he lied, was ignorant or both. If video is important or if thats what you thought you were getting you will need to return your 4G iPod photo for new iPod.
Rotsa Ruck!

I am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

i am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

Looking up your camera online, I found it is capable of 1920 x 1080 Full HD 60p Recording. It's the 60p (60 frames per second Progressive) that's the problem I think. iMovie '11 will do 60i (Interlaced). You might need to convert it from the format the camera currently uses into another format to get it into iMovie. Read more about it on this link here: How to import 60p footage From that message thread comes the recommendation to use ClipWrap to convert the camera's video clips now that they are in 60p:
Tom Wolsky
Re: How to import 60p footage
Aug 17, 2011 12:40 PM (in response to ptburnett68)
Use ClipWrap to rewrap to QuickTime. Import the files. Edit in either 59.94 or 29.97. The latter if you want to use the high frame rate for slomo

Trouble with opening images from dreamweaver cs6(64bit) to photoshop cs6(64bit).

Hi guys i need help! I have trouble with opening images from dreamweaver cs6(64bit) to photoshop cs6(64bit). I uninstalled and went to preferences/file types editors to set up ps6 as primary but I still get some error.After i click image in dreamweaver,I get this message-Unable to launch...Please be sure that application exists and that there is enough memory to run it..

Can you Launch Photoshop normally from your desktop shortcuts?
I usually keep DW and PS open at all times so I can switch back & forth.
Nancy O.

Trouble with large videos

I'm wondering if anyone has had any trouble with large videos in their stacks? We are using a clip that weighs in at about 311 MB and my art director is reporting some trouble getting it into InDesign.
A shorter clip weighing in at 170 MB is working just fine.
Any ideas?

That is a pretty small file for being 7 hours long.
Have you tried using interpolation and converting the hours, seconds and frames into all seconds or does that defeat the object of the composition? I have a bunch of movies taken with the same camera and some do not provide a timecode. Has been an issue for me for a while. In X.6.+ even apple created comps cause the finder and QC to crash. You wil get a lot more kowledgeable people over at http://kineme.net

Trouble viewing streaming video with Quicktime

This is a problem I have no encountered before, and I am hoping someone has an idea, because I'm fresh out.
A user has to take a class that involves her logging into a webiste with her own unique ID, and watching a video before it will allow her to take a test. It is a quicktime streaming video. When she attempts to watch the video, all she gets is a large quicktime symbol with a bar going back and forth under it, as though it were loading, but it never loads. Here comes the odd part. We had another user log into the website ont the same computer and she was able to watch the video just fine. We then had the original user try to watch on a different computer, and she was still not able to watch, though another user was able to watch the video with their own login on that computer as well. We believe it is a problem with her account on that website, but I am just curious if quicktime has any quirks that might cause this? Any help would be appreciated!
Thanks!

I cannot imagine that the problem is due to QuickTime or any other fault on the computer. If it were, it's highly likely that all users logging in from that same computer would have the same problem, and the problem would not be moving with that user to other computers.
I think it's almost certainly something amiss with your user's account on your server.
Regards.

Trouble with ichat video

I dont know if this is any where else in the forum but i am haveing trouble getting a video chat to work. The person im trying to chat with has a macbook as well. at first we had to try a few times to get it to work and then we did. when we got back on after ending our first one 10 mins ago we couldnt get it to work.
Why would this happen if we had already gotten it to work? it says that it failed to connect because i didnt respond although i clicked accept. when i would do that it would say connecting video with _ and then give an error note after a few seconds.
If anyone could help that would be great
-Emily
Macbook 2Ghz Intel Core Duo Mac OS X (10.4.10)

Hi
First have you set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps(dont use automatic)
In ichats prefs click on video and change bandwidth limit to NONE.
Restart iChat.
Tony

Trouble with Playing Video Files

I have a new macbook pro and I am having trouble playing video files. It seems like it is having trouble with the size of the file. I need to get this figured out because I will be doing a lot of work with video including using final cut to edit. Any suggestions for me to speed up video play?

Any suggestions for me to speed up video play?
Max out your ram.
It seems like it is having trouble with the size of the file.
Please clarify.
Are the videos home made, downloaded from the net, browser videos, streaming videos, etc.

Dashboard widget with streaming video breaks after upgrade to Mountain Lion

Hi. I recently upgraded from Snow Leopard to Mountain Lion. Under SL, I had an OS X widget that was a web clipping of a streaming mpeg image being produced by a Linksys/Cisco WVC54GCA web camera. When I brought up the dashboard, the OS would start streaming the data from the mpeg filename, which looks like "hostname.com/img/video.mjpeg".
After upgrading to Mountain Lion, I noted that the widget never fully loads, indefinitely displaying a "Loading Clip..." mesasge. After deleting and re-adding, I can still get as far as adding the web clipping to the dashboard at the right dimensions, but there's no content.
Unfortunately the camera unit doesn't provide for the display of HTTP access logs, so I can't see if there's an issue there, but my understanding is that if I can display the image in a Safari browser, it should work just fine in Dashboard too. (I did make sure that, where needed, the username/password for accessing the video are included in the URL.)
I did sniff the network traffic between my system and the camera host, and show that video traffic starts flowing between the two as soon as the widget is brought up. So, it's almost like the widget doesn't know when to stop "loading" and start "displaying," perhaps because the HTTP request is never truly "done."
Can anyone speculate if something may have changed in Mountain Lion affecting the ability of web clipping widgets to display streaming video?
Thanks,
Chris

Hi James
I have exactly the same problem with the same "Loading clip" then blank. I have been trying a lot of stuff to get this working, but haven't had the chance of sniffing the network traffic as you have done. By reading what you said about the traffic seems to be flowing without the picure being displayed makes me even more puzzled by this. I never had a streaming video while I were using Snow Leopard, but I had a still-image, as I also do now in Mountain Lion. I recently began to research for a way to display the video.cgi MIME image that my camera produces, and I've also concluded that this should be an easy task for the dashboard web clip function; the video does display in safari after all.
I suspect that our cameras uses the same built in webserver solution written by a "Steven Wu". Cheap webcameras frequently uses his script with MJPEG (stream of JPEG pictures) to avoid the expensive licenses of using other video codecs.
I read this a bit down at this site: http://channel9.msdn.com/coding4fun/articles/Everyone-Loves-Babies-Webcams-and-M otion-Detection
Have you come any closer in your research?
I have started to think that maybe I have to write a dashboard widget on my own to accomplish this.
trelements

Trouble with Streaming Video in Dreamweaver 8

Similar Messages

Maybe you are looking for