Troubles finding values for a RE-FX's Report

Hi gurus,
After all this time fighting with a REFX's report, I debugged the RECN Transaction and I found the method that calculates the value I am trying to show, ( especially beacause none of the RE's bapis have the field I need )
I found in the class CL_REAJ_METHOD, there is the following methid IF_REAJ_METHOD~GET_DETAIL_BY_CONDITION that calculates the value I am looking for.
The exactly value is the last adjustment method, which is got from the get_last_adjm_date method.
I wonder if somebody has any idea how to use or get that value ... I am sincerely desperate with this issue...

Helpfull since it's logical that the processor connector with set the height. Just beware that the ones you showed me, for the cube are female-female. And the Quicksilver, like the Gigabit and DA will take female-male since they have females embedded (permanently) in the metal sheet covering the case's lid. I'll get two pairs of the Gigabit ones, and apply one pair to the quicksilver. thanks.
Message was edited by: Lars_G

Similar Messages

Is it possible to find out for one universe in which reports is used?

Hi,
Can we find out for one universe in which reports is used?
We have universes that we used to create different reports, InfoView reports. And we need to find out in which of them.
Regards,

Hi Valdete,
You can run a query for the universe using QueryBuilder:
http://servername:port/AdminTools
You can find out the CUID of the universe by viewing its properties. Note this CUID down.
CUID is the longer, alpha-numeric value.
In query builder, run the following:
select si_name, si_webi from ci_appobjects where si_cuid='Cuid of the Universe'
OR
select * from ci_appobjects where si_cuid='Cuid of the Universe' (then look for SI_WEBI.
SI_WEBI stores the object IDs of all the reports that this universe points to.
You can then query the table ci_infoobjects, using si_id to find details of the report.
I would also recommend you to go through the links that Ajay has posted as this provides a better insight into QB.
Hope this helps.
-Sid

How to set a new value for formula field in crystal reports xi?

<p>How to set a new value for formula field in crystal reports xi?</p><p>//formula</p><p>{@description}</p><p> </p><p>exemplo in VB6</p><p>crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" or</p><p>crxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"</p><p>How to in JRC?</p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p>

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
<p>Blair Wheadon</p>
<p>Product Manager, Crystal Reports</p>

Finding value for a specific condition

Hi All,
I have a several Employee Numbers in my Database Table. Each Employee is having different set of Profile Numbers.
For eg. the Table Emp_Profile contains the following
Emp No ProfileNo Salary Red_Amount
1000     11     1200     430
1000     12     100     55
1000     13     120     7
1000     14     430     8
1000     15     300     40
1000     43     200     20
1000     56     100     232
1010     11     1000     300
1010     14     110     700
1010     19     200     500
1010     12     410     545
1010     13     300     54
If the Employee contains 19,45,67,89,99,24 as ProfileNo then For Each Employee reduce the Salary value for 11 ProfileNo by the Corresponding Red_Amount
Ie the Output Should be
For
EmpNo Salary
1000 1200
1010 500 (as it has 19 ProfileNo)
Please help me in doing this task.
Regards,
Gita

I used simple case.
And I used searched case.
create table empTable(EmpNo,ProfileNo,Salary,Red_Amount) as
select 1000,11,1200,430 from dual union
select 1000,12, 100, 55 from dual union
select 1000,13, 120, 7 from dual union
select 1000,14, 430, 8 from dual union
select 1000,15, 300, 40 from dual union
select 1000,43, 200, 20 from dual union
select 1000,56, 100,232 from dual union
select 1010,11,1000,300 from dual union
select 1010,14, 110,700 from dual union
select 1010,19, 200,500 from dual union
select 1010,12, 410,545 from dual union
select 1010,13, 300, 54 from dual;
select EmpNo,
case max(case when ProfileNo in(19,45,67,89,99,24)
              then 1 else 0 end)
when 1 then max(decode(ProfileNo,19,Red_Amount))
else max(Salary) end as Salary
from empTable
group by EmpNo;
EmpNo Salary
1000    1200
1010     500

To show all months of qty values for each fiscal year in report?

Our cube contains different fiscal years of order qty/delivered qty for a material (e.g. material A). We use fiscal year variant V9 (Oct. - Sep). We would like to generate the following query result to list the material, order qty, fiscal year, and then for each calender month, the delivered qty value for the corresponding fiscal year:
Column title:
Material --- Order Qty --- Fiscal Year --- Oct --- Nov --- Dec --- Jan --- Feb --- Mar --- Apr --- May --- Jun --- Jul --- Aug --- Sep
Just give two rows of data for material A:
1st row data example:
A (material) --- 23 (Order Qty) --- 2006 (fiscal year) --- 2 (delivered qty in Oct of the calendar year 2005 ) --- 4(delivered qty in Nov of the calendar year 2005 ) ---1 (delivered qty in Dec of the calendar year 2005 ) --- 5 (delivered qty in Jan of the calendar year 2006 ) --- .... 2 (delivered qty in Sep. of the calendar year 2006)
2nd row data example:
A (material) --- 45 (Order Qty) --- 2007 (fiscal year) --- 3(delivered qty in Oct of the calendar year 2006 ) --- 6 (delivered qty in Nov of the calendar year 2006 ) ---1 (delivered qty in Dec of the calendar year 2006 ) --- 5 (delivered qty in Jan of the calendar year 2007 ) --- .... 2 (delivered qty in Sep. of the calendar year 2007)
How to generate this query?
Thanks!

hi Chandran,
Actually in each row data for material in different fiscal year, all the KFs in columns should be restricted to the fiscal year value. What we do is to use selections other than structure or RKF. What we is following listed in details that you can check if what we do is correct:
Under KF structure:
1. Create a selection for the 1st KF (Order Qty). In this selection, Order Qty is restricted with the characteristic 0FISCYEAR.
2. Create a formular as 2nd KF for the FY value. This formula KF use the value of a formular variable with Replacement Path of the the characteristic 0FISCYEAR. But somehow this KF value shows "X" values in this column. We defined this Replacement Path variable with the Reference Characteristic as 0FISCYEAR and all others keep default. But don't know why this column shows "X" values. We also add 0FISCYEAR to the row, and find the one does have data in the row. Any idea why put it in formular variable onto column not working?
3. Create a selecction for the 3rd KF (Oct). In this selection, restrict Delivered Qty with the characteristic 0CALMONTH2 (Calendar month) and further restrict 0CALMONTH2 to a fixed value: October
4. Create a selecction for the 4th KF (Nov). In this selection, restrict Delivered Qty with the characteristic 0CALMONTH2 (Calendar month) and further restrict 0CALMONTH2 to a fixed value: November.
Then the following steps are similar to step 3 and 4 to create all other Month columns. We wonder in all these selections, would we have to restrict them further with 0FISCYEAR?
Therefore we've got two questions:
1. Why in step 2, the formular variable doesn't work and the FY column shows "X" values?
2. Do we need to further restrict the delivered qty with the characteristic 0FISCYEAR for each month column which corresonding to the fiscal year in the same row?
Thanks alot and we are keeping giving you reward points!

How to dispalay only 10 values for a prompt in a report

Hi,
We are displaying the values for a prompt through userresponse() function on the report.But the user want us to display upto 10 values for a prompt, thought he selct more LOV's for a prompt.Could anyone help me in sloving this issue.
Thanks in Advance.
Regards,
Spandana.

Hi,
you need to define your database under the DB Admin tab. In the Schema objects node you'll find Sequence Implementations, and there you can definde min max values as well as caching and increments.
Gerald

* Values for Billing QTY in a Report

Dear SDN,
I am getting some values for Billing Qty as star (*)...in a Credit memos Report (SD)..
I am using 0SD_C03 InfoCube..
I have checked in the PSA also.. Data is available... Some value should come...but * is coming
Help will be greatly appreciated with points..
Thanks in advance...

Thanks...
But after doing the same way .. i am not getting any Units...
Not getting * but values are ok...But without any units
But Now client may ask to me..How to identify which are expressed in NO and TO and KG...
Please help me out to resolve it
Indeed, Thanks a lot for your help...

Select multiple items from a list box as values for a parameter of crystal report and Oracle procedure

- I have a Product list box (asp.net) used as multiple selected values for a parameter.
- The Product ID is defined in the Oracle procedure as NUMBER data type.
- In my crystal report, I have a parameter field allow multiple values as p_product_id type as Number. This is the code in my Record Selection Formula for the report:
({?p_product_id}[1] = -1 OR {Procedure_name.product_id} in {p_product_id})
- In C#, this is my code
List<decimal?> productUnit = new List<decimal?>();
int counter = 0;
decimal prod;
for (int i = 0; i < lstProducts.Items.Count; i++)
              if (lstProducts.Items[i].Selected)
                            if (decimal.TryParse(lstProduct.Items[i].Value, out prod))
                                productUnit.Add((decimal?)prod);
                                counter++;
       if (counter == 0)
                   productUnit.Add(-1);
ReportingDAO rDataFactory = new ReportingDAO();
retVal = rDataFactory.GetProductReport(productUnit);
public CrystalDecisions.CrystalReports.Engine.ReportDocument GetProductReport(List<decimal?> productUnit)
          CrystalDecisions.CrystalReports.Engine.ReportDocument retVal = new rptProductDownload();
          ReportLogon rptLog = new ReportLogon();
         rptLog.Logon(retVal, "RPT_PRODUCT_DOWNLOAD");
         retVal.SetParameterValue("p_product_id", productUnit);
I keep having the "Value does not fall within the expected range" when I debug. My question is, is the data type I used for procedure/Crystal report/ and C# correct ? I always have problem with the data type. Any help would be
appreciated
Thank you

Hi progGirl,
Thank you for your post, but Microsoft doesn't provide support for CrystalReport now. Please post your question in SAP official site here:
http://forums.sdn.sap.com/forum.jspa?forumID=313
Thank you for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Passing different (multi-) values for parameters to drill-through report, based on clicked subtotal in main report

In Report Builder 3.0, I have made a main report in which the user can filter the underlying dataset using three parameters (all multi-value). The report shows totals grouped by these three parameters, as well as a grand total. What I want is to click
on a total, which then opens the drill-through report for the corresponding records. I have achieved this for the grand total; the action in the corresponding text box passes all selected values of the parameters to the drill-through report.
What I cannot figure out is how to make this work right when clicking on a subtotal. When I use the same expression as for the grand total, the same values for the parameters are passed, instead of the subset that apply to the corresponding text box in the
main report. I expected this to work, because Report Builder /does/ correctly calculate the SUMs for the different levels, even though the expressions are the same.
My question is: how do I pass different drill-through (multi-) values for parameters, corresponding to the respective subtotals in the main report?
(FYI: I am using Microsoft SQL Server 2008 R2 and Report Builder 3.0 .)

Hello Katherine,
Thanks once more for your quick reply.
I was aware of the textbox action "Go to report", and how to pass parameters in general. My question concerned how to determine the scope of the passed multi-value parameters (to the values that apply to the respective group/subtotal). The article you linked
to is informative, but not a solution to my problem.
A colleague of mine came up with a pragmatic solution: instead of trying to determine the scope of the parameter values, now I "look to the left in the results table". The two screenshots below should illustrate this. (Screenshots are in Dutch. Specific information
is pixelated.)
Unfortunately, I am not able to post images. Once my account is verified, I will edit them in. For now, I hope the text speaks for itself enough.
[Screenshot: Drill-through parameters - 01: Report Builder tablix with subtotals]
[Screenshot: Drill-through parameters - 02: Textbox properties (selected in screenshot 01) - Action - Go to report]
The first screenshot shows the tablix in the Report Builder. The second screenshot shows the properties of the textbox selected in the first.
Notice that I do not pass parameters for the first two columns, but the actual values. I only pass the parameter (containing /all/ user-selected values) for the third column. In the textbox below the selected one, I pass the actual values for the first column,
and parameters for the last two. In the textbox above the selected one, I pass the actual values for all three columns.
The only (cosmetic) flaw this approach has is that in the drill-through report, the list of selected parameters might show values that do not occur in the (corresponding part of the) results, and only for those parameters for which the main report passes (all
user-selected) parameter values, and not the actual values in the results. The results are correct, though.
If there is a way to directly determine the scope of multi-value parameters for passing to a drill-through report, I would still like know. But for now, this seems to work.

How to find values for fields of PROPERTIES in cl_crm_documents= create_w

Hi everyone ,
I am attaching files from local disk to CRM Opportunity by using method cl_crm_documents=>create_with_file .
I am able to see files in SAP frontend portal , but the problem is some of the fields in properties tab coming blank .
So how to find the NAME and VALUE fields of PROPERTIES structure in create_with_file .
Right now i am passing below fields these ar coming
"-----Filling Properties structure
    ls_prop-name   = 'KW_RELATIVE_URL'.
    ls_prop-value = wa_path-ls_name.
    APPEND ls_prop TO lt_prop.
    ls_prop-name   = 'DESCRIPTION '.
    ls_prop-value = 'Strategy paper for action plan1' .
    APPEND ls_prop TO lt_prop.
ls_prop-name = 'LANGUAGE'.
    ls_prop-value = sy-langu.
    APPEND ls_prop TO lt_prop.
but fileds like Attachment Type , Document Status , Line of Business , Business Year and Country of LE are not coming
as i frontend is a CRM custom application to mentain opportunity .
at prasent i am passing attribute Names and default values of these fields to properties structure but then also i am unable to see it in front end.
Please help if anybody knows where to find the NAME and VALUE fields for thse parameters.
Regards
Chetan

I used insert statement to populate these fields in table CRMD_KW_DOC_GEN as these are custom fields.
Regards
Chetan

Expression to find value for previous year SSRS

Hi
I need some help with expressions.I need a report that shows calcul of a field for current year as well as previous year respecting this rule expression(Last-Last Previous)/Last Previous*100 (I work with MDX Query and i work with SSRS 2008).
Also the report runs on a Year Parameter. Below is an example for the result
for example i selected the years 2010 2011 2012 i can select another years because i have the report runs on a Year Parameter
year
Data 2010 2011 2012
hp 14 25 30
Dell 17 18 20
and the result i want
year
Data 2010 2011 2012 2011/2012
hp 14 25 30 0.002 (Last -Last Previous)/(last Previous*100) =(30-25)/(25*100)
Dell 17 18 20 0.0040
Thanks a lot

Hi Yassir,
Please find the RDL code, save the code into .RDL and run it
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<Body>
<ReportItems>
<Tablix Name="matrix1">
<TablixCorner>
<TablixCornerRows>
<TablixCornerRow>
<TablixCornerCell>
<CellContents>
<Textbox Name="textbox3">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value />
<Style>
<FontFamily>Tahoma</FontFamily>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox3</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCornerCell>
</TablixCornerRow>
</TablixCornerRows>
</TablixCorner>
<TablixBody>
<TablixColumns>
<TablixColumn>
<Width>1in</Width>
</TablixColumn>
<TablixColumn>
<Width>1in</Width>
</TablixColumn>
</TablixColumns>
<TablixRows>
<TablixRow>
<Height>0.21in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="textbox2">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Sum(Fields!value.Value)</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox2</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
<DataElementOutput>Output</DataElementOutput>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="Textbox16">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=((last(Fields!value.Value) -Code.GetValueByKeyValue(Fields!keyvalue.Value)) /Code.GetValueByKeyValue(Fields!keyvalue.Value))*100</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
<Format>f2</Format>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox16</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
<DataElementOutput>Output</DataElementOutput>
</TablixCell>
</TablixCells>
</TablixRow>
</TablixRows>
</TablixBody>
<TablixColumnHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="matrix1_year">
<GroupExpressions>
<GroupExpression>=Fields!year.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!year.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>0.21in</Size>
<CellContents>
<Textbox Name="year">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!year.Value</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
<FontWeight>Bold</FontWeight>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>year</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>#6e9eca</BackgroundColor>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<DataElementOutput>Output</DataElementOutput>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
<TablixHeader>
<Size>0.21in</Size>
<CellContents>
<Textbox Name="Textbox4">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value />
<Style>
<FontFamily>Tahoma</FontFamily>
<FontWeight>Bold</FontWeight>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox4</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>#6e9eca</BackgroundColor>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
</TablixMember>
</TablixMembers>
</TablixColumnHierarchy>
<TablixRowHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="matrix1_data">
<GroupExpressions>
<GroupExpression>=Fields!data.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!data.Value</Value>
<Direction>Descending</Direction>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>1in</Size>
<CellContents>
<Textbox Name="data">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!data.Value</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
<FontWeight>Bold</FontWeight>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>data</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>#6e9eca</BackgroundColor>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<TablixMembers>
<TablixMember />
</TablixMembers>
<DataElementOutput>Output</DataElementOutput>
<KeepTogether>true</KeepTogether>
</TablixMember>
</TablixMembers>
</TablixRowHierarchy>
<RepeatColumnHeaders>true</RepeatColumnHeaders>
<RepeatRowHeaders>true</RepeatRowHeaders>
<DataSetName>DataSet1</DataSetName>
<Top>1.20333in</Top>
<Left>0.10833in</Left>
<Height>0.42in</Height>
<Width>3in</Width>
<Style />
</Tablix>
<Textbox Name="textbox1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Get the last previous value</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
<FontSize>12pt</FontSize>
<FontWeight>Bold</FontWeight>
<Color>SteelBlue</Color>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox1</rd:DefaultName>
<Height>0.37in</Height>
<Width>5in</Width>
<ZIndex>1</ZIndex>
<Style>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
<Tablix Name="Tablix1">
<TablixCorner>
<TablixCornerRows>
<TablixCornerRow>
<TablixCornerCell>
<CellContents>
<Textbox Name="Textbox7">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>data</Value>
<Style>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox7</rd:DefaultName>
<Style>
<Border>
<Color>White</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCornerCell>
</TablixCornerRow>
</TablixCornerRows>
</TablixCorner>
<TablixBody>
<TablixColumns>
<TablixColumn>
<Width>1in</Width>
</TablixColumn>
<TablixColumn>
<Width>1in</Width>
</TablixColumn>
</TablixColumns>
<TablixRows>
<TablixRow>
<Height>0.25in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="previous">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Sum(Fields!previous.Value)</Value>
<Style>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>previous</rd:DefaultName>
<Style>
<Border>
<Color>White</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="Textbox21">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Code.AddKeyValue(Fields!keyvalue.Value, last(Fields!previous.Value))</Value>
<Style>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox21</rd:DefaultName>
<Style>
<Border>
<Color>White</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
</TablixCells>
</TablixRow>
</TablixRows>
</TablixBody>
<TablixColumnHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="year">
<GroupExpressions>
<GroupExpression>=Fields!year.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!year.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>0.25in</Size>
<CellContents>
<Textbox Name="year1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!year.Value</Value>
<Style>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>year1</rd:DefaultName>
<Style>
<Border>
<Color>White</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<TablixMembers>
<TablixMember />
</TablixMembers>
</TablixMember>
<TablixMember>
<TablixHeader>
<Size>0.25in</Size>
<CellContents>
<Textbox Name="Textbox20">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value />
<Style>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox20</rd:DefaultName>
<Style>
<Border>
<Color>White</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
</TablixMember>
</TablixMembers>
</TablixColumnHierarchy>
<TablixRowHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="data">
<GroupExpressions>
<GroupExpression>=Fields!data.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!data.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>1in</Size>
<CellContents>
<Textbox Name="data1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!data.Value</Value>
<Style>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>data1</rd:DefaultName>
<Style>
<Border>
<Color>White</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
</TablixMember>
</TablixMembers>
</TablixRowHierarchy>
<DataSetName>DataSet2</DataSetName>
<Top>0.43944in</Top>
<Left>0.29667in</Left>
<Height>0.5in</Height>
<Width>3in</Width>
<ZIndex>2</ZIndex>
<Style>
<Border>
<Color>White</Color>
<Style>None</Style>
</Border>
</Style>
</Tablix>
</ReportItems>
<Height>1.76333in</Height>
<Style />
</Body>
<Width>5.10833in</Width>
<Page>
<LeftMargin>1in</LeftMargin>
<RightMargin>1in</RightMargin>
<TopMargin>1in</TopMargin>
<BottomMargin>1in</BottomMargin>
<Style />
</Page>
<AutoRefresh>0</AutoRefresh>
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:SecurityType>None</rd:SecurityType>
<rd:DataSourceID>87cd8154-60ce-43ca-a678-39a5c1bfeb15</rd:DataSourceID>
</DataSource>
</DataSources>
<DataSets>
<DataSet Name="DataSet2">
<Query>
<DataSourceName>DataSource1</DataSourceName>
<QueryParameters>
<QueryParameter Name="@Year">
<Value>=Parameters!Year.Value</Value>
</QueryParameter>
</QueryParameters>
<CommandText>select * from
SELECT data, year , value AS previous,cast(year as varchar)+ data as keyvalue,row_number() over(partition by data order by year desc) yeardesc
FROM (SELECT 'HP' DATA, 2010 year, 14 value
UNION
SELECT 'HP' DATA, 2011 year, 25 value
UNION
SELECT 'HP' DATA, 2012 year, 30 value
UNION
SELECT 'Dell' DATA, 2010 year, 17 value
UNION
SELECT 'Dell' DATA, 2011 year, 18 value
UNION
SELECT 'Dell' DATA, 2012 year, 20 value
) AS t
WHERE year IN (@Year)
)t1
where yeardesc <> 1
order by year asc</CommandText>
</Query>
<Fields>
<Field Name="data">
<DataField>data</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="year">
<DataField>year</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="previous">
<DataField>previous</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="keyvalue">
<DataField>keyvalue</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="yeardesc">
<DataField>yeardesc</DataField>
<rd:TypeName>System.Int64</rd:TypeName>
</Field>
</Fields>
</DataSet>
<DataSet Name="DataSet1">
<Query>
<DataSourceName>DataSource1</DataSourceName>
<QueryParameters>
<QueryParameter Name="@Year">
<Value>=Parameters!Year.Value</Value>
</QueryParameter>
</QueryParameters>
<CommandText>SELECT data, year, value,cast(year as varchar)+data keyvalue
FROM (SELECT 'HP' DATA, 2010 year, 14 value
UNION
SELECT 'HP' DATA, 2011 year, 25 value
UNION
SELECT 'HP' DATA, 2012 year, 30 value
UNION
SELECT 'Dell' DATA, 2010 year, 17 value
UNION
SELECT 'Dell' DATA, 2011 year, 18 value
UNION
SELECT 'Dell' DATA, 2012 year, 20 value) AS t
WHERE year IN (@Year)</CommandText>
</Query>
<Fields>
<Field Name="data">
<DataField>data</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="year">
<DataField>year</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="value">
<DataField>value</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="keyvalue">
<DataField>keyvalue</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
</Fields>
</DataSet>
</DataSets>
<ReportParameters>
<ReportParameter Name="Year">
<DataType>String</DataType>
<DefaultValue>
<Values>
<Value>=2010</Value>
<Value>=2011</Value>
<Value>=2012</Value>
</Values>
</DefaultValue>
<Prompt>Year</Prompt>
<ValidValues>
<ParameterValues>
<ParameterValue>
<Value>2010</Value>
<Label>2010</Label>
</ParameterValue>
<ParameterValue>
<Value>2011</Value>
<Label>2011</Label>
</ParameterValue>
<ParameterValue>
<Value>2012</Value>
<Label>2012</Label>
</ParameterValue>
</ParameterValues>
</ValidValues>
<MultiValue>true</MultiValue>
</ReportParameter>
</ReportParameters>
<Code>Public PersSal as New System.Collections.HashTable()
Function ClearList(SomeValue as String) as String
PersSal.Clear
Return SomeValue
End Function
Function AddKeyValue(KeyValue as String, Value as Decimal) as Decimal
Try
PersSal.Add(KeyValue, Value)
Return Value
Catch ex as Exception
End Try
End Function
Function GetValueByKeyValue (ByVal Key As String) As Decimal
For Each clsPair As System.Collections.DictionaryEntry In PersSal
If clsPair.Key.ToString() = Key Then Return clsPair.Value
Next
End Function</Code>
<Language>en-US</Language>
<ConsumeContainerWhitespace>true</ConsumeContainerWhitespace>
<rd:ReportUnitType>Inch</rd:ReportUnitType>
<rd:ReportID>53660ed8-b969-46cf-960b-2ccb14abf7e7</rd:ReportID>
</Report>
Thanks
Prasad
Mark this as Answer if it helps you to proceed on further.

Dynamically find values for M_EINK_FRG for FRGCO

I would like to dynamically fill the release code value in the authorization object M_EINK_FRG based on the user entering ME54N.
Can this be done?
So instead of putting 06 as a value in this object I'd like to put a field name that would be filled when this authorization check is made.

What you can do is generate javascript that looks likeif (selectedID == 1) {
return ['option a', 'option b'];
} else if (selectedID == 2) {
return ['option 'c', 'option d'];
}and use that from a different function (which gets invoked if your first level menu changes). The generation would be done with some loop construct (c:if or logic:iterate for example).

Where I can find value for APXWS_EXPR_1 in IRR report

Hi,
I need to export the region into excel, its working fine. but my requirement is after user using the IRR filter he wants to export only those records.
I see the query uses APXWS_EXPR_1 to filter it but can not get the value. please let me know where i can find a value.
Thanks
K

Hi,
APEX_IR_QUERY package might help you
http://stewstools.wordpress.com/apex_ir_query-package/
http://simonhunt.blogspot.com/2009/02/auditing-downloads-from-interactive.html
Also this Martin blog post might help
http://apex-smb.blogspot.com/2009/04/log-apex-interactive-report-search.html
Br,Jari

Trouble finding driver for Canon ir2520

Am having challenges finding a driver that works on mac (using Mac OS X version 10.7.4)
Any ideas, thoughts or suggestions greatly appreciated.

Check here to see if it's on Canon's Lion compatibility list. And then check here for driver downloads. And, apart from Canon, try here.
Clinton

I have completed the generic extraction - an i find values for numeric ?

Hi all,
Generic extraction can be done using:
1. calendar day
2. Timestamp
3. Numeric pointer.
I have used numeric pointer - in which table can i see the flag for numeric pointer.
And for timestamp and calendar day - in which table can is see when was the last extraction happeneed for generic extraction using timestamp and for calenday day.
Thanks
Pooja

hi,
check the delta pointer for that datasource in table ROOSGENDLM.
regards
mohammed

Troubles finding values for a RE-FX's Report

Similar Messages

Maybe you are looking for