Troubleshooting Management Point installation on site system
Hello,
I am trying to install MP on site system, where DP and SMP are installed already. But installing of MP fails. In the Event Viewer on site system I see:
component SMS_SITE_COMPONENT_MANAGER on computer SCCM.contoso.com reported: Site Component Manager failed to reinstall this component on this site system.
I did not find mpsetup.log on site system, where is it stored? where is not such folders \program files\microsoft configuration manager or sms_ccm.
Start by looking in the sitecomp.log file on the Site Server. This should give you information about the MP component installation adn why it failed. Then have a look at the
mpsetup.log which you will find on the server where you added the MP. It will be in the
<Driveletter>:\SMS\Logs folder
Similar Messages
-
Hi,
We have an flat singel site.
Boundary Group for site assignment, shall I add My "Management Point" as a "Site System Server" in "References"
/SaiTechYes - if it's also a DP?
The servers are added as content location servers for this boundary group. Only servers that have a distribution point or state migration point installed on them are available.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
SCCM Management point installation errors
we have been experiencing some issues with SCCM and NAP problems with updating distribution points. A repair has tried to be run, however we are having issues with our installation of management point
uninstalled MP, uninstalled IIS, rebooted, installed IIS, install MP
errors from logs below
mpMSI.log
MSI (s) (4C:3C) [11:09:44:910]: Windows Installer installed the product. Product Name: SMS Management Point. Product Version: 4.00.6487.2000. Product Language: 1033. Installation success or error status: 1603.
MPSetup.log
<07-01-2011 10:58:09> Installing D:\Program Files (x86)\Microsoft Configuration Manager\bin\i386\mp.msi CCMINSTALLDIR="D:\Program Files (x86)\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files (x86)\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80
USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<07-01-2011 11:09:44> mp.msi exited with return code: 1603
<07-01-2011 11:09:44> Backing up D:\Program Files (x86)\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files (x86)\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<07-01-2011 11:09:44> Fatal MSI Error - mp.msi could not be installed.
Please helpHi, it maybe a permission issue of your task directory (%windir%\Tasks).
Take this thread as a reference, it contains the same error as you:
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/248b8fca-c6f3-47a4-a76c-c45125296692/
In the thread Bechir Gharbi gave some steps to fix it:
- Remove the MP as a site system role (if it is still installed), wait for it to finish
- Remove IIS completely
- Reboot the server
- Stop the Task Scheduler Service
- Rename the %windir%\Tasks folder to something else (or move it)
- Start the Task Scheduler Service (this will recreate the %windir%\Tasks folder)
- Reinstall IIS, BITS, WebDAV
- Insure BITS and WebDAV are enabled
- Reinstall the MP
Thanks -
Uninstall and Reinstall Secondary Site Management Point Role
Dear Brothers,
I have an issue with one of my SCCM 2012 Sp1 with CU3 Secondary Site Server which the client failed to install on the actual server due to a client issue observed in the CCMSetup.log.
Observation Regarding the issue:
Issue Detail No1.
SCCM Client is not installing to my Secondary Site Server with site code (XYZ), after all the site server are also clients in SCCM hierarchy so it self needs SCCM Client as well.
CCMSetup.log:
"Error 25150. Setup was unable to register the CCM_Service_HostingConfiguration endpoint" when you try to install the client agent in Configuration Manager"
According to http://support.microsoft.com/kb/2905359
the solution is to :
1. Uninstall the management point role.
2. Reinstall the client agent on the management point computer.
3. Reinstall the management point role.
Issue Detail No 2.
When I am trying to uninstall the Management Point Role via SCCM Console as part of the solution posted on the above KB Article, unfortunately the delete or uninstall option is been greyed out.
Now a lot of discussion on the topic "Can not remove management point role is greyed out "under this thread
http://social.technet.microsoft.com/Forums/en-US/1a039893-4a65-4dc9-9feb-e6f09ea1fc0b/can-not-remove-management-point-remove-role-is-greyd-out?forum=configmanagerdeployment
However on the last comment of the above thread from"Trana010"
stated a tool or a command
C:\program files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:(sec server name) SMSMP
0
Which I never tried yet, and also cannot find a reliable KB supporting the command "rolesetup.exe".
Questions:
1. What is the best way to uninstall/Reinstall the management point on secondary site considering the above issue details?
2. Should I installed CU4 directly instead? Maybe it will resolved the issue even though it is not related to the current case
Regards,Well, it's by design that you can't remove a management point on a secondary site, so I can imagine that that's why there is nothing "official" written on that subject. I think there are three things you can do:
Try to run the command line (which is probably unsupported)
Submit a CSS call
Upgrade to CU4 and assume the problem is gone.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
Dear Peter,
I end up shooting a case with CSS, he guided me and share that this issue is very common.
The reason is that it requires CU3 upgrade (Configmgr2012ac-sp1-kb2882125-x64.msp) to be installed with the SCCM Client installation (The same time) via command line in an elevated permission.
Follow the solution provided by Microsoft Support:
CCMSetup.exe /forceinstall SMSSITECODE=XYZ CCMENABLELOGGING=TRUE CCMLOGLEVEL=0 PATCH=C:\Configmgr2012ac-sp1-kb2882125-x64.msp
It seems the Client Push provided by SCCM 2012 Sp1 Infra, that includes your Hotfix under the "Hotfix" folder under the client source folder somehow doesn't work with this issue, that's why the work around is to help the ccmsetup to grab the Hotfix with
by providing the path for the hotfix instead of relying to take the hotfix for the hotfix folder.
Overall peter thanks for your suggestion. And also to Mr. Jason Sandys opening the option for an R2 upgrade, I will look into the KB for this to plan for implementation.
Regards, -
How to assign clients to alternate management point
Hi Guys
Does anyone know how to reassign clients to another management point on the same site.
We have 3 seperate locations connected by a vpn, our main site has a primary site server with the management point role and the other 2 locations are just distribution and management point servers.
I have built another distribution /management point server as the primary server site location as i want to take some of the roles of the primary site server as its overloaded, all my clients at this site are already assigned to the primary site server management
point but want to assign them to the new distibution/management point at the same site.
Was going to uninstall the management point role of the primary site server so that just my new server would have this role at this location, if i do this will the cleints automatically assign themself to the only available management point at this site
or will they break.The clients always request a list of available MPs. If you deinstall a MP it will not be on that list anymore, so the clients will automatically go to another available MP.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
My organization has SCCM 2012 R2 up and running with one primary and 2 secondary servers. All 3 servers are management points. The servers are geographically separated by between 30 and 60 miles. Currently half the computers
at location 1 are connected to the management point at location 1 and the other half are connected to the management point at location 2. It seems to me that all the computers at location 1 should connect to the management point
at location 1 and all the computers at location 2 should connect to the management point at location 2, likewise for location 3.
Am I wrong?
Does it make any difference?
Is there a way to force the computers to connect to the closest management point?
Is there an explanation for this behavior?
All 3 servers are distribution points as well and later this summer a 4th server will go in at a location about 200 miles from the primary location. It too will be a management point and DP.
All and any comments greatly appreciated.
WD
Management points are not site aware, they're picked up randomly and mostly used for redundancy / load balancing / sizing. How many clients are there in your locations? One MP can support up to 25 000 clients so I think you'd be good to go with a single
one in your primary site and then only add distribution points to your remote locations.
Perhaps this is partially true. But my experience is that clients that are assigned with a boundary of a secondary site DP, will roam only between that MP and the parent site MP. They do NOT roam within another secondary site MP. The end
result is clients using a SS in the UK do NOT use a SS MP in Texas. -
Add Site System Roles (Management Point)
To resolve an issue I was having with the management point role I have removed it.
I left it for an hour and then restarted the server and the role had been removed. When I tried to re-add the role the option is greyed out. I believe this is due to the Server being the primary site but am finding it hard to get any definitive answer on
how to re-add the role.
Currently my site has no management point.
My question is HOW DO I RE-ADD THE ROLE OF "MANAGEMENT POINT"?
Will the configuration management setup wizard allow me to do this, whilst retaining the current roles and config?I thought it was a permissions issue at first to. Signed into the server with the service account used to install SCCM and also explicitly named my domain account as a local admin despite me being a domain admin. Furthermore, I have access to remove the
roles from the server and permission to add and remove roles to all other servers.
Adding role
In management console Administration>Site Configuration>Servers and Site System Roles
This bring up the list of servers and when left clicked their roles. I right click on the server in question and the option to "add site system roles" is greyed out as are the sub-options under start and the option to delete.
Will screen shot in the morning -
Symptom: When you install Reporting Service Point role on a Site System Server running SQL Server
2012 SP1, you may encounter an issue that the Reporting Service Point role cannot be installed. The error log “srsrpMSI.log” and “srsrpsetup.log” may throw the error as shown in Figure 1 and Figure 2.
03:32:03:764]:
MainEngineThread is returning 1618
Figure 1: Error -1
<03/03/14 03:32:03>
srsrp.msi exited with return code: 1618
Figure 2: Error -2
Reason: All the two logs indicate an error return code 1618. From the KB below you may know what
the return code means.
ERROR_INSTALL_ALREADY RUNNING
1618
Another installation is already in progress. Complete that installation before proceeding with this install.
KB link:
http://support.microsoft.com/kb/290158 “it is related to an Office Suite KB, anyway, the MSI return code is the same meaning”
You can look into Resource Manager and Event Viewer to find the other currently running MSI installation. You may get a warning in Event Log that means the MSI wants to install a SQL Server
related Component (Figure 3). The Resource Manager confirms this (Figure 4).
Event Log:
Event ID: 1004
Source: Msinstaller
Level: Warning
Detection of product '{A7037EB2-F953-4B12-B843-195F4D988DA1}',
feature 'SQL_Tools_ANS', component '{0CECE655-2A0F-4593-AF4B-EFC31D622982}' failed. The resource '' does not exist.
Figure 3: Event Log
Figure 4: Resource Manager
Resolution: the error is exactly what the following KB describes.
KB Link:
http://support.microsoft.com/kb/2793634
After we resolve the SQL Server 2012 issue, the Reporting Service Role is installed successfully.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference. -
SCCM 2012 - Change Distribution Point's Site System Properties Site Code
Hello All,
I'm hoping someone can help me out. Here's what I have and here's what I'm trying to do.
SCCM 2012 R1
Each of our offices has a Windows 7 SP1 Ent PC that is a distribution point for that office's 10-20 machines. A number of these offices and their DPs were setup prior to me setting up a number of Secondary Site Servers. So right now, these DPs' site codes
are the primary site server's. I'd like to change these to one of the Secondary Site Servers.
When I go to the Site System properties of one of these Win7 distribution points, the Site Code is grayed out.
So, the question is, how can I change one of these DPs' site codes?
Thanks in advance to whomever helps!!
BillThat's a strange reason for using Secondary Sites. How many clients are you managing? Have you good WAN links?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
I uninstalled MBAM 2.0 and installed MBAM 2.5. During 2.5 installation there was this one section to enter "Web service application pool domain account", where I entered domain admin account. I don´t know if that has any effect on this problem.
Though, situation now is that my site is now out of order because of Management Point cannot connect to IIS or something like that.
In status messages I see "MP Control Manager detected management point is not responding to HTTP requests. The HTTP status code and text is 404, Not Found. Message ID 5436".
In mpcontrol.log I see Call to HttpSendRequestSync failed for port 80 with status code 404, text: Not Found
I have tried:
Bindings checked, that http uses port 80
MP component is uninstalled and reinstalled succsessfully
Primary site server has restarted several times
In IIS, Default Site -> SMS_MP->Basic Settings I did "Test Settings". With pass-through authentification it cannot Access the D:\SMS_CCM path, I changed to the domain admin, and it succseed. I have no idea, does this have something to do
with it.I have experienced all the above problems also and they can be a pain to fix. I guess the moral of the story is (as Andy says) leave the ConfigMgr server alone. If you want an MBAM server then build an MBAM server.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Hmm, I guess ConfMgr integration will not be the problem if your MP is using http(80) and MBAM will use https(443). If you then set spn to https, it will use 443 as-is, right? But other custom ports might be the problem? -
SCCM and ForeFront Endpoint Protection point site system role
Thanks for looking at this......I am working with SCCM 2012, and ForeFront Endpoint Protection has been set up as an Endpoint Protection point site system role. Up to now we just haven't had to mess with it much, it just has worked. I
have been busy packaging applications for the eager public. I have one pc that has had the Endpoint client self destruct. Had to remove it via the control panel. I next did a machine policy retrieval and evaluation cycle (among others) and sccm
shows that it is aware that this particular machine needs FEP. It lists it as "To Be Installed". How long will this take? I have things set for "as soon as possible". Am I at the mercy of Sccm? Also, is there
a way to force the install? Thanks for any light you can shed on this!This will depend on your SCCM client policy settings to allow SCEP installation outside of maintenance windows (if you have any).
It will also depend if you are using 2 hour deployment "randomizer" option in your SCCM client policy.
Lastly, you can install it with BITS that have already been downloaded with SCCM client install.
c:\windows\ccmsetup\scepintall.exe -
Cant install destribution point on site system server (0x800706ba)
hi everybody , im having a problem trying to install configuration manager 2012 destribution point (im using sccm 2012 sp1).
when im deploying the site system to the machine (server 2012) the wizard go smooth and looks good , but when i look at the distmgr.log i see the following error :
CWmi::connect() failed to connect to server\root\sccmdp error = 0x800706ba
just yesterday i have installed it with the same configuration and method on a virtual server (im having a problem with a physical one ) any ideas ???I recently had a similar problem with Server 2012R2 and HP Proliant (a few years old). I had to update the firmware so that Windows 2012 could be installed properly.
This actually makes sense in your case as you have no issue with virtual.
However this is a question for the Windows Server 2012 forum. This isn't an issue with ConfigMgr.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Log location for the DP having only "Distribution point" and "site system" installed
Hi
I have one SCCM DP 2012 server. that have only "Distribution point" and "site system" role installed.
Is the log will be generated on primary server? I am not able to find the log on this server.
Please help me in this.
Regards, Shishir Kushawaha "If this thread answered your question, please click on "Mark as Answer"HI,
You will have it in a folder called \SMS_DP\sms\logs, you can also see information about package transfers in the primary site server in the distmgr.log and pkgxfermgr.log files .
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation . " What do I do?
yes, I did that with helping message 3, I'd remove Cs6 only, but it did not help. The message "Failed to initialize the setup program. To identify the problem, download the program Adobe Support Advisor" repeat again =(
-
Management Point, System Center License required?
Hi
If I am setting up a Windows Server as an additional Management point and Distribution Point. Does it need a System Center server license?
/ALXNo. You only need a license for servers and workstations you want to manage (not the management servers)
http://www.micromail.com/files/admin/uploads/W285_Field_2_65088.pdf
However, MS licensing is a minefield and all organisations have different benefits. You need to contact your Microsoft License reseller for best information.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Maybe you are looking for
-
Mail crashing while checking for incoming messages
Every time I open Mail, it crashes on me. Everything happens normally until it starts downloading new messages, at which point it crashes. Here is the report: Process: Mail [5267] Path: /Applications/Mail.app/Contents/MacOS/Mail Identifier: com.apple
-
Hi, I have a requirement as below, We need to schedule a JOB using JOB_OPEN FM and SUBMIT the report and JOB_CLOSE. In this process, we want to run this job on a different user name other than SY-UNAME. How to schedule a JOB with some other user name
-
I started updating my iPhone 3gs but now it is locked and sim is not being recognized by the set
-
Late-2011 MacBook Pro 13" Freezes with Clicking Noise
Hi guys, I bought a MacBook Pro for my birthday in April earlier this year (the model is the Late 2011 i5 13 inch model). Recently I have been encountering a problem where randomly a clicking noise will start and repeat every 5 or so seconds. On top
-
Resetting the File browse item in Javascript in Apex 4.0
Hi, Can anyone please help to reset the File browse item in Apex with Javascript. For example I have an File Browse item P10_FILE_BROWSE, I have selected some file in it and on Click of button, I want to set NULL in that File Browse item "P10_FILE_BR