Troubleshooting of CCMS Configuration in SAP-PI 7.1
Hi
I have configured the CCMS configuration in PI 7.1 My intention to raise the email alerts if anything goes wrong
I have done it using the below weblogs....
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/3187. [original link is broken] [original link is broken] [original link is broken]
I have done the following steps in 000 client
1. activated the central Dispatching job
2. Configured the SCOT
3. created the RFC destination to target client (200 in my case ) .. as per note 0176492
4. Specified the parameters in CCMS_OnAlert_Email_V2 .Sender id existing user in 000 client.
Below are the parameters i have specified in Auto reaction method
SENDER- SAP*
RECIPIENT- mentioned mail address
RECIPIENT-TYPEID- U
Here i do have one doubt on sender id. do we need to specify the dialog user or does SAP* serve our purpose.?
I hope everything as per procedure and now i do see alerts in RZ20 t-code dnt get any email alerts
Can someone through some light on this.. and guide how to troubleshoot my configuration.
Thanks in Advance.
Regards,
Deep
You can use any dialog/system user, the user must have a valid e-mail address populated on the user master though.
Regards
Juan
Similar Messages
-
Hello all.....
Please tell me how to do CCMS Configuration ?
My environment is MS SQL, SAP4.7, WINDOWS 2003 Server
Gayatry.Hi,
Check this....
http://help.sap.com/saphelp_nw70/helpdata/en/72/e670375fbf307ee10000009b38f8cf/frameset.htm
Refer this also...
Here is the link for the file you uploaded:
http://download.yousendit.com/F7A778914F4FE3B9
Note: Points always encourage me reply!! -
CCMS Configuration Guide of ECC 5.0 and BW 3.5
Hi,
Can anyone send me the CCMS configuration Guide (Step by Step) for ECC 5.0 and BW 3.5.
Regards
ChanduHi,
Try this,
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
http://service.sap.com/monitoring
Thanks
DST
Message was edited by:
DST -
Variant Configuration in SAP CRM
Hello all
My client is currently using SAP R/3 4.7 and heavily use VC for configurable products and also for pricing but in the process of moving to ECC
Now we wish to explore the possibility of using SAP CRM 7.0 to enable our sales force to use CRM Web GUI to create quotes and sales orders ( in the future) for configurable materials.
My questions are as following:-
1. Is it possible to download all VC related data into CRM from R/3 including pricing? I understand that for different VC object, I will have to use different CRM objects but is it possible? If the data transfer is possible, is it typically done by a middleware resource?
2. I would also like to confirm that by creating a run time version and Kbase is required to enable the download to CRM.
3. No changes are possible on the product that can be replicated back to ECC
4. Looking at the forums - I gather that "from CRM 2007 the PME is replaced with WEB UI in CRM. IF you want to do the modeling of a product then u need to use WEB UI and also for generating the KB" - does anyone have any information on this using the XCM ?
If you could please point me to the appropriate help on this topic, I would really appreciate it.
Best regards
RajHi Anne,
Hope you have done the following settings -
The product is marked as configurable in the product master data.
Product configuration is activated. You activate product configuration in Customizing under Customer Relationship Management Master Data Products Settings for Configurable Products Allow Configurable Products for a Product Type . For more information about activating product configuration, see SAP Note 854170.
You have created a product model (SAP CRM), or replicated a knowledge base with the configuration master data from SAP ERP to SAP CRM
These are mentioned in the below link -
Product Configuration with the Configuration Engine in SAP CRM - SAP Library
Hope this will be useful.
Thanks and Regards
DJ -
MM configurations for SAP AFS System
Hi,
I'm working in MM configuration for SAP AFS production system, After uploading AFS Materials successfully and also created Purchase order to make a stock for that material, but PO created successfully but not able to do Goods receipts for created PO.
Errors : Purchase order xxxxx has no items,
Once created sales order for the same material again we got the error while GR but error is different.
GR is not possible for this PO number.
But material type is ROH , and its external procurement only.
Please let me know when we will get this type of errors.
Thanks and regards
Nisar.Hi Nasir;
Some possible causes are;
1. Defining inbound delivery (Or kind of a confirmation) in the PO LI level and not maintaining the document subsequently
2. Not releasing the PO before the GRN
3. Creating the PO with a material with Grids (AFS Basic Data Screen) and not maintaining the grid value at item detail level of the PO
Azwath Mohammad
http://www.sapafs.net -
Error in the configuration for sap logon tickets
Hi Forum,
I use Tcode crmd_order_bp to see the BP cockpit and the error message displays as
<b>Error in the configuration for SAP logon tickets</b>
But if I click "Yes", system displays cockpit.
How can I avoid this error.
Thanks in advance
Regards
ShridharYou will still need to configure SSO (either by logon ticket or username/password). The data source access is done using the username/password configured in the UM Config dialog box.
I can see where you're coming from with your thinking, however logon-ticket-based SSO is probably the best approach.
Cheers,
Darren. -
Hi, what's the impact of creating sites through configuration in Sap retail System?
Hi Experts,
Business requirement is to have a production plant created through config in retail system and then ship the finished product to DC using STO's and Dc will be created as master data in retail system. please share your experience on business impact on this integartion of production plant and site in Retail?
Thanks in Advance !Hi Govind,
In SAP Retail system, the options for creating plant from configuration is disabled. Means in SPRO screen, the execute button is not there for these options. So you will not be able to create plant through configuration in SAP Retail system where the retail switch is activated.
All the Retail related features will not support that plants.
To the best of my knowledge, Site created in Retail system using WB01 transactions can be used for production cycle to implement manufacturing scenario. Using article to article stock transfer you can transfer the stock of Finished Goods articles to trading articles and so on.
Various processes are available for this.
Let me know if you need any more information.
Regards,
Amit -
MaxDB configuration file - SAP System Rename
Hello,
I am new and tried to make a System Rename with SWPM.
We have maxDB.
After a few steps the setup wants you to choose a maxDB configuration file which was used for installation of the source system.
Does anyone new where I can find this configuration file?
I tried a few cfg files but nothing was correct.
These files here are not correct, I tried.
Configuration Files - SAP Documentation
Thank you so far and well greets.
StefanHi Deepak,
Thanks for your suggestion but there are no existing enteries for MaxDB in the windows registry.
We are facing an issue while renaming the database. Kindly refer to SAP Note : 1427931
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
Best Regards -
Problem facing in Dynamic configuration in SAP PI 7.3
Hello,
I am doing dynamic configuration in sap pi 7.3. I am using the following UDF.
String devFileName="'a.vc'";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey FileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","FileName");
conf.put(FileName, devFilename);
I am using this UDF in message mapping and mapped this UDF in the message header.
I have selected the adapter specific message attribute in receiver communication channel also.
Still I am getting the folowing error.
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but was not supplied in the XI Message header
Exception caught by adapter framework: The Adapter Message Property 'FileName' was configured as mandatory element, but was not supplied in the XI Message header
'Transmitting the message to endpoint using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but was not supplied in the XI Message header.
Please help me what to do.
Thanks & Regards,
MoumitaHi, try this code:
String devFileName="a.vc";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
conf.put(FileName, devFilename);
ASMA checkbox and respective parameter should be enabled in the required Adapter.
Best Regards -
Synchronous file adapter sender side configuration in sap pi
Hi Experts
synchronous file adapter sender side configuration in sap pi
can you explain any one tell me step by step procedure?
Regards
SagarHi,
You can use RequestResponseBean in the sender file adapter module .
RequestResponseBean (SAP Library - SAP Exchange Infrastructure)
Request/Response Bean for IDOC_AAE adapter
Instead of IDOC_AAE adapter you can use FILE adapter.
Regards, -
MS active Directory Configuration on SAP 4.7 and ECC6.0
Hello
Can anybody guide the steps required for MS Active Directory Configuration with SAP 4.7 on AIX and
and ECC 6.0 also on AIX 5.3.
Currently we are using many different applications on client landscape.
The requirement is for implementing the Single Sign On for all the applications
on the client landscape.Please check
/people/andre.fischer/blog/2008/06/04/windows-server-2008--active-directory-certified-for-the-bc-ldap-usr-directory-interface-for-user-management
In Case you also have EP then
/people/wai-hon.lam/blog/2006/04/20/windows-integrated-authentication-via-kerberos-on-an-ldap-data-source
Also check below for SSO
Note 121178 - NT: Installation note for SSO Single Sign On
Note 138498 - Single Sign-On Solutions -
Configuration between SAP PI and BPM in SAP PO
Dear Experts,
I am working on SAP PO 7.31 and want to carry out configuration between SAP PI and BPM in SAP PO. I carried the post installation
activities in NWA i.e. CTC.
Helplessly , I could not find any documents and notes to refer the configurations.
Regards
RebeccaAAEx configuration:
Advanced Adapter Engine Extended (AEX) - Installation and Configuration - III
Configuring SAP BPM and PI runtime:
Configuring Message Processing from PI to BPM - Process Orchestration - SAP Library
Sample BPM
NetWeaver BPM for System-to-System Message Orchestration (Including Migration of ccBPM to NW BPM)
Hope this helps -
Hi SAP XI experts!
I implemented a simple File to IDOC scenario with SAP XI 7.0 for SAP ECC 6.0 system.
Now I set up Business Process Monitoring within SAP Solution Manager.
There I can monitor the Interface Monitoring.
Here I am able to give Application Monitor, CCMS Monitor, Analyse & Monitoring Tools, Monitoring Activities.
Question:
What are the steps to activate CCMS monitoring for SAP XI?
What is the CCMS path to monitor the XI messages from SXI_MONITOR?
Thank you very much!
regards
Holger ThomassonHi!
Many thanks!
I mean how can monitor the following issues?
a) on XI side: tcode SXI_MONITOR
Are there some undelivered messages?
b) on SAP ERB sind: tcode BD87
Are there some IDOC that have the status other than "green"
Thank you!
regards -
Mail configuration in SAP SOLUTION MANAGER 7.1
Hi All,
I am working on SMTP (Mail)Configuration in SAP Solution Manager 7.1. And our mail host is GOOGLE APPS.
Does any one had configured mail in SAP for hosted on GOOGLE APPS?
Does SAP will support this as it is external (mail) server?
I read note 455140, related notes and configured accordingly.
Steps I followed:
1. parameters maintained:
icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180
is/SMTP/virt_host_0 = *:25000;
2. User maintained: Dialog user with S_A.SCON profile with user address as username@<companyname>.com
3.Client Assignment: (SICF): a. Host Data:Profile Parameter Number: is/SMTP/virt_host_0
b. Service data: Client 100, user: username, password: ***, language: EN.
c. Handler List: CL_SMTP_EXT_SAPCONNECT in the first position
Saved Changes n Activated.
4.SAPconnect administration (SCOT):
a. Default domain: <companyname>.com
b. Nodes: SMTP Under node:
Mail Host: smtp.gmail.com
Mail Port: 25 and also tried 587
In Internet Address Area: *
5.Scheduled periodic Job with SAP&CONNECTALL variant
6. telnet <HOSTNAME> 25000 is successful
In both cases I am getting error as:
No delivery to ishan.sangai@<companyname>.com, authentication required
Message no. XS853
Diagnosis
The message was processed successfully in the SAP system. The mail server that is supposed to receive the message for further processing requires authentication. The SAP system does not support this procedure. As a result, the message was not delivered to recipient ishan.sangai@<companyname>.com.
Information from External System
_530 5.7.0 Must issue a STARTTLS command first. p1admin@<companyname>.com
Procedure
The administration settings must be changed. The specified mail server must not request authentication.
7. I tried to telnet smtp.gmail.com 25 and 587 also
I am getting following output:
220 mx.google.com ESMTP ds5sm2193379ibb.5
HELO <HOSTNAME>
250 mx.google.com at your service
HELO <companyname>.com
250 mx.google.com at your service
MAIL FROM solman_admin@<companyname>.com ENVID=12345
530 5.7.0 Must issue a STARTTLS command first. ds5sm2193379ibb.5
Does we need to talk with Google Apps provider for any modifications to be made for this.
if yes, which changes should I request them?
Please help me to solve this problem.
Please provide links,guides.notes etc. for this scenario
Thanks & Regards,
IshanHi we are configuring Google SMTP getting below error..
No delivery to xxx.com, authentication required
Message no. XS856
Diagnosis
The message was processed successfully in the SAP system. The mail server that is to receive the message for further processing requires authentication. Probably there is no logon data specified in the SAPconnect configuration.
Information from external system (if available)
smtp.gmail.com:587
530 5.7.0 Must issue a STARTTLS command first. i91sm11178241qgd.25 - gsmtp
Procedure
Enter the logon data in the SAPconnect node.
Using Gmail SMTP server using "smtp.gmail.com" with port 587
Please advise.
Regards,
Sudarshan -
Configuration of SAP NW AS (Configuration of SAP Mobile Infrastructure)
Hello everyone
'm configuring the MI and I want to clarify some key concepts.
In the configuration of SAP NetWeaver AS when it says to initiate transactions (eg PFCG) means over the SAP R3 system?
Thanks, GokhanDear Veeraraagavan,
Yes, SAP R/3 = backend
I think you're right, and I'm banging my head on for days ... I gave a quick glance at guides (installation, architecture, Installation Options, etc.) on the SAP Web NWAS and I think I found a bit of light!
But I need confirmation from you experts.
On the Configuration of SAP Mobile Infrastructure in Prerequisites section is written that there is need of SAP NetWeaver AS 2004 (including the SAP J2EE Engine and the ABAP stack), so if I understand correctly the installation option for SAP Web AS is Integration = SAP Web Application Server ABAP + Java System. So what in the figure http://www.mediafire.com/imageview.php?quickkey=vg3nzmjhiwm&thumb=6 represents only a SAP Web Application Server Java System (J2EE Engine) and non-SAP Web Application Server ABAP + Java System? Or it could be an ABAP + Java System?
I'm thinking that might be missing only the SAP GUI to access the ABAB ENGINE as shown in this photo http://help.sap.com/saphelp_nw04/helpdata/EN/84/54953fc405330ee10000000a114084/frameset.htm .
Thanks in advance, Gokhan
Maybe you are looking for
-
TREX7.1 - Program not registered
Hi to all experts, I am implementing TREX7.1 revision 36 (latest) which is standalone, but I encountered the error - program not registered while creating the RFC connection in admin tool. Previously the connection was working but it happens when I s
-
Is Safari 5.0.5 compatible with OS X 10.6.8?
When I try to install Safari 5.0.5, I get a message stating that it works only with OS X 10.6.7. Is there a way to install a compatible version of Safari?
-
IPod Touch video out broken with 3.1.3
Anyone else experienced this? I updated to 3.1.3 this afternoon, and now when I plug my iPod into the dock in my LG Home Theatre the iPod displays a message about it not being compatible with that accessory. I get the same result when trying to outpu
-
Hi Gurus, We have currently upgraded from 11i to R12.1.2 and we have decided to USE MLS & NLS(Multi Language Support) for the very 1st time.We have 4 Languages (American,Spanish,French,Portuguese) so when we query for data in tl tables(apterms_tl,ra_
-
How to access HID Class Devide with C program??
HI, every, I need to port an application from linux to Max OS X , Working on C enviroment. On linux, API from lib #include <linux/hid.h>. I use to open/ioctl HID handle directly, Now, On Mac OS X,How to do this,No hid.h in mac OX S? I already read a