Trying to configure a network connection on Fresh installation!

Hello,
I am new here. I am trying to configure a network connection. I prefer to configure a static Ip connection. So, i want to follow this guide-article:
https://wiki.archlinux.org/index.php/Systemd-networkd .
At the bottom of the page Static ip Network is located. So my main question is what is container and what is host?
Also, i would like a tip if possible, My computer is connected to a switch which gives IP to many computers. For this situation what is best? DHCP or static IP?
Thanks in advance!

Ok, Here it comes ,
My internet connection is slow. I have a laptop next to me with windows on it and the difference is huge.
I am posting several outputs of commands.
# ping -c 3 google.com
PING google.com (194.177.211.120) 56(84) bytes of data.
64 bytes from 194.177.211.120: icmp_seq=1 ttl=60 time=15.2 ms
64 bytes from 194.177.211.120: icmp_seq=2 ttl=60 time=16.3 ms
64 bytes from 194.177.211.120: icmp_seq=3 ttl=60 time=21.4 ms
--- google.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 20185ms
rtt min/avg/max/mdev = 15.237/17.679/21.444/2.703 ms
# ping -c 5 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=51 time=72.9 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=51 time=66.6 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=51 time=61.7 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=51 time=70.1 ms
64 bytes from 8.8.8.8: icmp_seq=5 ttl=51 time=65.4 ms
--- 8.8.8.8 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4005ms
rtt min/avg/max/mdev = 61.792/67.407/72.936/3.846 ms
# cat /etc/systemd/network/50-static.network
[Match]
Name=eth0
[Network]
DNS=192.168.7.2 8.8.8.8
Gateway=192.168.7.2
Address=192.168.7.120/24
# time wget [url]http://www.google.com[/url]
--2015-03-05 01:26:33-- [url]http://www.google.com/[/url]
Resolving [url=http://www.google.com]www.google.com[/url] ([url=http://www.google.com]www.google.com[/url])... 194.177.211.113, 194.177.211.117, 194.177.211.121, ...
Connecting to [url=http://www.google.com]www.google.com[/url] ([url=http://www.google.com]www.google.com[/url])|194.177.211.113|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: [url]http://www.google.gr/?gfe_rd=cr&ei=EJX3VLfcB4aJ8Qf-yYDACA[/url] [following]
--2015-03-05 01:26:38-- [url]http://www.google.gr/?gfe_rd=cr&ei=EJX3VLfcB4aJ8Qf-yYDACA[/url]
Resolving [url=http://www.google.gr]www.google.gr[/url] ([url=http://www.google.gr]www.google.gr[/url])... 194.177.211.121, 194.177.211.122, 194.177.211.116, ...
Reusing existing connection to [url=http://www.google.com:80]www.google.com:80[/url].
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘index.html’
index.html [ <=> ] 17.89K --.-KB/s in 0.04s
2015-03-05 01:26:43 (427 KB/s) - ‘index.html’ saved [18317]
real 0m10.441s
user 0m0.010s
sys 0m0.010s
# wget [url]http://www.google.com[/url]
Resolving [url=http://www.google.com]www.google.com[/url] ([url=http://www.google.com]www.google.com[/url])... 194.177.211.117, 194.177.211.116, 194.177.211.119, ...
Connecting to [url=http://www.google.com]www.google.com[/url] ([url=http://www.google.com]www.google.com[/url])|194.177.211.117|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: [url]http://www.google.gr/?gfe_rd=cr&ei=KZf3VM7SB6mH8Qeu_ICIBA[/url] [following]
--2015-03-05 01:35:35-- [url]http://www.google.gr/?gfe_rd=cr&ei=KZf3VM7SB6mH8Qeu_ICIBA[/url]
Resolving [url=http://www.google.gr]www.google.gr[/url] ([url=http://www.google.gr]www.google.gr[/url])... 194.177.211.123, 194.177.211.122, 194.177.211.119, ...
Reusing existing connection to [url=http://www.google.com:80]www.google.com:80[/url].
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘index.html.1’
index.html.1 [ <=> ] 17.92K --.-KB/s in 0.03s
2015-03-05 01:35:50 (573 KB/s) - ‘index.html.1’ saved [18346]
# lspci -v
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
Subsystem: Gigabyte Technology Co., Ltd Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 26
I/O ports at de00 [size=256]
Memory at fdbff000 (64-bit, prefetchable) [size=4K]
Memory at fdbe0000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at fde00000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 12-34-56-78-12-34-56-78
Kernel driver in use: r8169
Kernel modules: r8169
# cat /etc/resolv.conf
# This file is managed by systemd-resolved(8). Do not edit.
# Third party programs must not access this file directly, but
# only through the symlink at /etc/resolv.conf. To manage
# resolv.conf(5) in a different way, replace the symlink by a
# static file or a different symlink.
nameserver 192.168.7.2
nameserver 8.8.8.8
# cat /etc/hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain zabArch
::1 localhost.localdomain zabArch
# End of file
# dmesg | grep r8169
[ 4.695019] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.695029] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.695227] r8169 0000:02:00.0: irq 26 for MSI/MSI-X
[ 4.695411] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc9000063e000, 00:24:1d:d1:44:ea, XID 1c4000c0 IRQ 26
[ 4.695414] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 6.859386] r8169 0000:02:00.0 eth0: link down
[ 6.859425] r8169 0000:02:00.0 eth0: link down
[ 8.479455] r8169 0000:02:00.0 eth0: link up
# time dig google.com
bash: dig: command not found
real 0m0.002s
user 0m0.000s
sys 0m0.000s
# time echo -e 'GET /HTTP/1.0\nHost: google.com\n\n'|nc 74.125.79.99:80
Error: Couldn't resolve host "74.125.79.99:80"
real 0m0.003s
user 0m0.000s
sys 0m0.000s
My motherboard is GIGABYTE GA-MA785GMT-UD2H
My network card is Realtek 8111C Gigabit Ethernet (10/100/1000Mbit)
I am trying firefox and uzbl-browser.
If any information is missing, please do not hesitate to ask.
Thanks in advance!
Last edited by zabrielza (2015-03-05 07:51:03)

Similar Messages

How do I stop InDesign from trying to create a network connection?

I have a huge problem, either with InDesign or Apple I am not sure.
Basically when I bring my computer home from work every time I open InDesing it tries to connect to a server and I get this error message: the server XXX.local may not exist or is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
Why is InDesign trying connect to a server? Photoshop and Illustrator work perfectly well and function as a normal program. Indesign has no reason to do this as it should need to work through a server.
I get this error message and once I have dismissed it, it comes back after a few seconds and then stalls my computer again.
I really hope that someone can give me some idea of what is happening because the support in my country have not been at all helpful. I am asking this same question on the Adobe forums.

I get no messages from ID for InDesign or anything else and I am running CS5. I can't install Little Snitch because it is a work computer and my IT won't let me me do it. They have mentioned reinstalling it but our IT department haven't said anything more than that and frankly I don't think they would register as an issue that needs fixing as such.
The drive it is looking for is the timecapsule.local which I have turned off and on again and nothing has helped.

Manually configuring WiFi network connections - ne...

Unable to uncover settings menu to allow for the manual configuration of the settings for my WiFI network. Network is using static IPs...is this not an option on the Lumia 920?

It is not an option. Fixed IP while fine for fixed devices that don't move and change networks, is not ideal for a mobile device connecting to multiple wlans with potentially different IP ranges. What you could do it to enable the DHCP server on your router with a small range which would allow you to use the phone while having your other devices on fixed IP's outside the range. Another possibility is to use IP reservation on the DHCP server for devices requiring a fixed IP. These are better solutions than having every device on fixed IP's.

Airport Extreme dropping network connection

Hi all,
I have had my iMac and Airport Extreme for about 6 months. Within the past month, each time my computer either hibernates or starts up after shutting down, I have to physically unplug my Airport Extreme for the Internet connection to work again. I have tried to update the software and also tried to reestablish the network connection using the Network Preferences and System Preferences yet nothing has worked so far. Any help would be great! Thanks,

I believe it has something to do with securing the network as I'm now running an unsecured network and it not only stays up but it also seems a bit faster. I even ran the Airport Utility via ethernet and got it to "almost" configure but for some reason the setting never got implemented but at least I have internet access in my entire house. I thought it might be interference with some part of the house but it is indeed due to the latest firmware update for the AEB. Which I now call AE"BS". I tried my older Airport Express but I also couldn't get it to configure to now I'm not even sure if its firmware on the AEB or the Airport Utility that is messed up. Going tethered is not an option as I don't want to hunker down in a closet! Go unsecured and it might fix a lot of the issues we are seeing.

Juniper Network Connect Support with Fusion

Hi, I'm trying to run Juniper Network Connect in my W7 partition using VM Ware Fusion, but I get the following error: nc.windos.app.24043 (a NC client is already configured on the client). Has anyone solved this?

Hi BDAqua, thank so much for see my post.
My path is /Applications/Symantec Solutions/Norton AntiVirus
Thanks again
Alex

How to configure jdbc/jndi connection in crystal report 10

Post Author: effy
CA Forum: Data Connectivity and SQL
i have tried to configure jdbc/jndi connection , i have both
drivers data base side and crystal report side but i
can't configure it. so please help if u know
something.

Sorry, but I'm not on a home pc, I'm working on a virtualized pc with a long chain of permissions ... so I cannot simply download and run an utility...
Instead... I think (I WAS thinking) someone from SAP can tell me this info ... Probably I'll buy a paid assistance ticket... But really it's a strange thing that a simply connection from a (so) paid software need a so difficult problem solving routine..
I edited my environment variales: JAVA, PATH; CLASSPATH; JAVA_DIR, and a long list of others ... to ALL point to ALL of directory containing used jars...
.. I asked my SysAdmin to edit CrConfig.xml and it's done ... classpath are rights, jdbc infos are also ok, ...
.. but none ...

Issue with Configuring BPM- MDS Connection -Oracle BPM 11g

Hi ,
I am trying to Configure BPM-MDS Connection:
Followed the below steps:
1. Configured DB Connection-DEV_MDS User --> Success
2. Configured SOA-MDS Connection -> DEV_MDS user --> Success
3. Trying to Configure BPm-MDS Connection faced the below issue:
Caused by: ORABPEL-10555
Identity Service Configuration error.
Identity Service Configuration has error.
Please refer to the identity service configuration guidelines and correct the Identity Service configurations. Contact Oracle Support Services if error is not fixable.
     at oracle.bpel.services.identity.client.AbstractIdentityConfigServiceClient.getDefaultRealmName(AbstractIdentityConfigServiceClient.java:99)
     at oracle.bpm.pml.security.util.SecurityServiceFactory.createSecurityHelper(SecurityServiceFactory.java:63)
     at oracle.bpm.services.pml.impl.SecurityService.getSecurityService(SecurityService.java:272)
     at oracle.bpm.services.pml.impl.SecurityService.checkMigration(SecurityService.java:88)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:91)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy260.checkMigration(Unknown Source)
     at oracle.bpm.services.pml.ejb.SecurityServiceBean.checkMigration(SecurityServiceBean.java:115)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy259.checkMigration(Unknown Source)
     at oracle.bpm.services.pml.ejb.SecurityServiceBean_z7zjfk_ISecurityServiceRemoteImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
     at oracle.bpm.services.pml.ejb.SecurityServiceBean_z7zjfk_ISecurityServiceRemoteImpl.checkMigration(Unknown Source)
     at oracle.bpm.services.pml.ejb.SecurityServiceBean_z7zjfk_ISecurityServiceRemoteImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: oracle.bpel.services.workflow.client.WorkflowServiceClientException: java.net.MalformedURLException: unknown protocol: ibm-0c09c4jrman.za.ibm.com
     at oracle.bpel.services.identity.client.IdentityConfigServiceSOAPClient.invoke(IdentityConfigServiceSOAPClient.java:251)
     at oracle.bpel.services.identity.client.IdentityConfigServiceSOAPClient.getDefaultRealmName(IdentityConfigServiceSOAPClient.java:325)
     at oracle.bpel.services.identity.client.AbstractIdentityConfigServiceClient.getDefaultRealmName(AbstractIdentityConfigServiceClient.java:85)
     ... 49 more
Caused by: java.net.MalformedURLException: unknown protocol: ibm-0c09c4jrman.za.ibm.com
     at java.net.URL.<init>(URL.java:574)
     at java.net.URL.<init>(URL.java:464)
     at java.net.URL.<init>(URL.java:413)
     at oracle.bpel.services.identity.client.IdentityConfigServiceSOAPClient.getWsdlUrl(IdentityConfigServiceSOAPClient.java:161)
     at oracle.bpel.services.identity.client.IdentityConfigServiceSOAPClient.createDispatch(IdentityConfigServiceSOAPClient.java:187)
     at oracle.bpel.services.identity.client.IdentityConfigServiceSOAPClient.invoke(IdentityConfigServiceSOAPClient.java:234)
     ... 51 more
Could someone provide any resolution over this !!!
Thanks in advance,
Chandra_

Please set the topic to "solved" then or even delete it, since the problem was related to your machine and the thread here doesn't help anyone else. Thanks in advance.

Juniper Network Connect fails in Mac OS 10.10

Hello,
I am trying to use Juniper Network Connect on my MacBook Pro running OS 10.10 and Java 8 (Update 25) to connect to my corporate network.
However, each time I log into my corporate network through Mozilla Firefox and attempt to establish a remote desktop connection the following message appears as Network Connect attempts to load, "An error occurred while extracting one of the Network Connect components."
Mozilla Firefox is recommended by my company.
Has anybody else experienced this issue?
I have encountered Network Connect problems over the years (and similar error messages) and I am wondering if this message is related to OS and/or Java upgrades?
Regards,
Ben

https://coderwall.com/p/_gpxpq/workaround-for-failing-juniper-network-connect-in -yosemite
Text of site:
The current version 8.0.7 of Network Connect and the latest Yosemite 10.10.1 don't like each other: you simply can't connect.
A workaround (and it should be nothing more if you care) is to allow unsigned kernel extensions (which are unsupported/disabled in Yosemite by default):
sudo nvram boot-args="kext-dev-mode=1"
(reboot afterward) To revert this:
sudo nvram -d boot-args
Looks like this is also helpful for some other problematic extensions.

"Safari cannot open the page because the network connection was lost"

I can't not access most of website by my cellular data, why? I still can receive or send on imessage, still can check my facebook but no instagram. What's wrong with my phone 5?
I tried to reset my network connection but it didn't work

Tap Settings > Safari
Tap to clear cookies, history, and data
Then restart the device.
If that didn't help, reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings

I bought a retina 15", but it will not make a network connection to my 27" iMac 2 feet away. The wifi is working fine on both units, but prefer to use ethernet cable on 27". The question is, why can I not ewstablish a network connection between the 2? Air

my desktop iMac 27". The odd this is, the AirDrop works fine, so they can obviously see each other over wifi.
Sometimes, when I launch network on the 27, I will briefly see my retina notebook attempting to connect, but after a few seconds, the notebook icon disappears until I relaunch. Then we can go thru the same exercise, ad nauseum.
Any suggestions?

Thanks, Linc, but that almost helped:
Because the retina 15 only has a wifi connection (no ethernet), that's the connection I'm stuck with for the notebook. But on the 27iMac, I did have both ethernet and wifi enabled. When I turned the wifi off on the 27, therer was a brief moment when both computers were showing their counterparts when I tried to make a network connection. BUT, after a few seconds of 'searching', the computer I was trying to connect to disappeared from the Network list.
So I tried the opposite; the retina can only connect thru wifi, so that's a given. I swithched my ethernet off and then enabed the wifi on the 27 and ....same thing: When I try a network connection, there are a few seconds of 'searching', then the ony option I'm left with is share screen, which doesn't work either.
I've read the 'dropped' network is a problem with the retina, but the odd thing is that I never lose my internet connection—that continues to work fine, as does Air Drop—but I can't seem to connect, network-wise.
Any ideas about the dropped network?

Public/private network connections

I am trying to setup the network connections so that I have 2 public hooked into the company lan and 1 private which lashes directly into an iScsi target. The documentation is totally confusing and unclear as to how I can set this up in this fashion. I have looked at this site and the xen.org site with its howtos and other locations I am at a loss of how to accomplish this.

Hi
Our setup involves two nics on LAN (172.16.1.67 and 172.16.1.68) as well as a iscsi nic on 172.16.2.67 for SAN storage to Dell MD3000i.
Works fine. iscsi connectivity done with iscsi inititator rpms shipped with Oracle VM disk and we then use a series of out of the box bridges and some post customisation and routing tables to deal with the LAN. The Xen virtual bridges will be created for you by default - the only need for us to create further virtual bridges and routing rules is we use the VM for maskinging client netwoks of 10.10.x.x for example and ensure we can connect from the 172 network.
ta

OVI store app installation error - network connect...

Im downloading some app at ovi store in my PC using Nokia PC Suite, my N8 connects to my pc using Bluetooth.
i can install some app but some of them are cancelled with this error message "Network connection lost cancelling installation"
and there's a message to select a particular icon to continue installation, but i cant find that icon in my N8
some snapshot of this error is attached
what does it really mean? how can i fix this?
Attachments:
Snap000018.jpg ‏48 KB
Snap000019.jpg ‏50 KB

We have the same issue!! I experience that alot of times!! I dont know how to fix it

Strange error trying to configure

Found the server, logging in with SSO admin and get this. Any ideas?
Something failed. Try again.
Command output does not match the expected pattern. Make sure the passed output is from the correct command, and the command completed successfully. Output is:

Probably some problem in the network configuration, although I couldn't figure out why the host command doesn't return anything AND doesn't complain ..
Can you try these as well:
1) host -v $(hostname -f)
2) Also check if you have any nameservers configured - you can do this with cat /etc/resolv.conf
Generally, you can cancel the installation and go configure the network settings from the installer. Just press "Cancel" in the wizard, then go to the "VA Settings" tab, there is an interface for network configuration
(you can then continue with the installation by going to "Overview" and pressing "Configure Support Assistant")
Hope that helps

Configuring network connectivity for VM's on Hyper-V 2012 R2 Server

Hi,
We have installed Hyper-V server 2012 R2 on a server and trying to configure 10 VM's.
on the host machine we have 4 ethernet adpaters available ,for now we have enabled only one.
Questions :
1)Can we use only one adapter and configure all the VM's ?
-- if we use only one adapter for connecting all the VM's will there be any performance or connectivity issues ?
2) Do we need to configure virtual switches ?
Note :Users will access VM's using VPN connectivity .
What is the recommended one .Please suggest
Thanks

Thanks Bill for your replies.
Everything is working fine now. all the VM's are getting the IP addresses.
The "Allow management operating system to share this network adapter" was unchecked. We checked that and restarted the hyper-v server.
By default it is checked ,accidentally it might have been unchecked.
Everything is working fine now.
Thanks again for your inputs.

Network Connection error when Trying to Install Windows Server 2012 R2 Essentials

Thank you to anyone who can help me out here. I have a brand new machine with known working wifi and wired ethernet adapters (works under Windows 8.1) I am attempting to install Windows Server 2012 Essentials R2. During the install process, the system connects
to the internet to download updates to help along the install. No problem here. Further down the road after restarting several times and now during the "Configuring Windows Server Essentials" step of the install, I am told "There is no network
connection. Please fix the connection issue and try again."
When troubleshooting the connection, I am told that the wifi adapter drivers may not be installed. I have a wireless card in the machine and have also tried disabling the wifi adapter and have been connected successfully via the ethernet port this whole
time.
Help, I'm stuck and have been to this point in the install 4-5 times already.
Thank you.

Is this a laptop? Can you remove the wifi? Disable it in BIOS?
Does the wifi have an IP and internet when it throws the error?
BTW, when the wizard ask about updates say no. Takes way too long and does not help anything
Change the binding order and put the wired on top.
The Steps?
Just open your Network and Sharing Center. (Change adapter settings)
Press an ALTkey on your keyboard to show the menu bar.
Click on the Advancedmenu
choose Advanced Settings option
Adjust your binding order for your NICs to ensure your wired ones are at the TOP
http://regularitguy.com/2012/12/06/how-to-change-nic-binding-order-in-windows-8-and-windows-server-2012/
Grey

Trying to configure a network connection on Fresh installation!

Similar Messages

Maybe you are looking for