Trying to find termplates with drop zones for FCP 6 Help please.
I'm on FCS 2 (FCP6) and I'm looking for some templates that I can use to create a short video montage. I wold like to have images moving slowly around the screen with 'firework' effects going off around them. I've seen this done with a template but that was done on FCP 7. This would take the rest of my life to do manually so the question is are the kinds of templates WITH DROP ZONES available for use in FCP6? I've searched around but can only find templates for fonts, transitions and so on. Any help much appreciated.
I've just realised that the template I was looking for in FC is actually available in Motion and I'd failed to install it, so I'm sorted. If there is a source of free templates I'd be thrilled to find them.
Similar Messages
-
I've downloaded the newest version of softwear to my iTunes libary (iOS 10.5 i believe) iTunes store now dosn't function right and i'm not able to sync. my iPod 4G with my libary. i've tried to reinstall iTunes, but for no use. help please.
well i have to be honest, but i don't know if it the vista you use has any significance for this. but you can try.
okay follow:
1: click "start" on the status line on the buttom of your screen.
2: then click on "all Programs" and find "Accessories" and find the "command prompt"
3: Right click with your mouse "command prompt" and click on "run as administrator"
(as you has click'd on "run as administrator", "command prompt" should appear.)
4: when it appears you need to type this "netsh windsock reset"
5: wait for your computer to registrer the command you gave it, and restart your computer.
then erverything should be pretty much as good or better then new. -
"Replace" does not work with drop zones?
I set up a project in FCPX using "dummy" stock footage - edited drop zones, changed size/position of clips, etc...
Now want to simply replace the stock footage with footage from the event browser.
Dragging selections from the event browser to the timeline causes the replaced footage to appear full-screen - all editing work is lost.
Is there another way to do this?When you drag over a clip in the timeline you are replacing that clip - which is precisely what you are getting, so no weird behavior here.
How to do it properly depends on which generators you used, but you probably need to just replace the drop zone clips, which is done in the inspector. Select the title or generator and in the inspector select the appropriate drop zone and choose the clip you want.
In the picture below I am using a split screen generator with two drop zones for left and right. The left drop zone is selected.
Once I click on a clip in the browser, it will appear; the choice is finalized by clicking the "Apply Clip" button. -
I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
Hello, I am trying to find a GPS Tracker/Watch for my kids, Apple Iphone 5s compatible. Any suggestions?
Hi, Please use the following link: http://support.hp.com/us-en/product/HP-Pavilion-10-x2-PC/7439381/model/7499063/manuals/ Regards.
-
hi you know i can't make the MIDI connection network from my iMac to my iPad 3 appears 192.168.1.69:5004 refused the connection request. ill appreciate so much your help I'm trying to do it with the animoog for iPad
Hi James and welcome.....
Try the help here for Windows 7.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Carolyn -
I am trying to find a program called XMP for putting metadata in pictures. Any ideas?
I am trying to find a program called XMP for putting metadata in pictures. Any ideas?
You can either enter metadata in bridge in the bridge metadata panel, or in Photoshop by selecting the file>File Info...
-
I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?
Hello daltonfromgbr
Check out the article below to troubleshoot you issue with connecting to Home Sharing. It will walk you through checking firewall settings as well as your network connection.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Regards,
-Norm G. -
I am trying to find the network security key for my airport extreme router
I am trying to find the network security key for my airport extreme so I can hook up my pc lap top.
I am afraid that the "key" will be of no use to you (it is 64 characters long).....but I hope I am wrong.
Since you indicate that you are using an iPad, I assume that you are also using AirPort Utility on the iPad.
On the iPad home screen, tap AirPort Utility
Tap on the AirPort Extreme
Tap on Edit
Tap on Advanced
Tap on Show Passwords
Tap on Main Network and "key" will be revealed -
hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help
Hi.
I had a similar problem myself. This is what helped me.
I went to the App store app, scrolled to the bottom, logged out of the account, re logged in with my Apple ID. Then went back to app updates. Once I put in my ID password all was fine. -
I changed my itunes password only and now I can't update any of the apps I downloaded using the old password. I tried signing in with the old password with no luck. Can someone help please?
Have you signed out of your iTunes account on the device/computer that you are using and signed back in with the updated password ? That should 'refresh' the account on it, and you should be able to use the account's new password to download updates to its apps
-
I am losing some of my contacts entered beyond a certain date repeatedly and automatically. I tried to disable sync with iCloud, but it didn't help. Please help me. I use an iPhone 5s with the latest software version.
I understand now that apple forums do not work and are a waste of time
-
My bluetooth keyboard (Macnus brand - bought recently in Thailand)(similar to Mac small keyboard) will pair with my iPad using code 8310,and is recognized by my iMac but will not pair?
There are very scant instructions with the keyboard and no mention of any code (the code was prompted by my iPad).
I have followed the instructions but it still will not pair with my iMac!
Can anyone help please?
My iMac is 20 inch Mid 2007 OSX10.9.1 4GB RAMHi All, thank you for you suggestions. I have been unable to find any website for the maker, but have looked at several Thai/cambodian sites incl <http://www.buycoms.com/Article/8435/index.asp> which mentions the keyboard being suitable for tablet or windows. No mention of iMac! although the box is branded to indicate Mac compatable.
I'm thinking that maybe it just will not pair with an iMac.
Ill keep looking for the maker website, which might come on later in the future? maybe?
thanks again. -
I've downloaded Flip4Mac and set as the default player by clicking on a wmv file in Finder and clicking Command I. Nothing is working, Help please.
Limnos,
Thanks for your reply. I tried that too and it still doesnt work. When I click on the wmv file it opens up in a new browser page. There is sound but no video.
Thank you -
previously i set up iphone 5 same user (account) with my brother.. Now i want to set up as my own User... but try to Erase all content n settings and plug in itunes to set up as a new iphone but it's keep sync with my brother phone ... help please ?
I recommend that you
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Use the new ID on her iPod but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
and Settings>iCloud
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.
Maybe you are looking for
-
Drop down values for table in a view not getting populated dynamically
Hi Experts, The problem which i am facing is as follows In an existing web dynpro component , i already have a view and it consists of table which has 3 columns.All the three columns are non editable MATERIAL MAT_DESC MAT_DEL_FLAG ABC
-
RSCRM_REPORT without access to sm37
To perform T-Code RSCRM_REPORT we need to launch jobs in Production. So we need access to launch any job in SM37. However, the users don't have access to SM37. If there is some other way for the users to launch a job other than through SM37 would
-
Insert table in between two rows of the table in Web dynpro abap.
Hi All, I have a requirment like this, while click on a hide/show button from the first row and last column of the table, want to display a table(or add some rows to insert data) in between the rows of the table and insert data in the new table . p
-
PROTECT DOES NOT SHOW CONTACTS IN BACKED UP DATA; 8530
Hello, when I attempted to restore my data from Blackberry Protect I do not see CONTACTS in the list of data that has been backed upand available to be restored. I checked the under OPTIONS in the app menu to verify that I had selected contacts and a
-
Star office with roaming profiles help please
Hope someone can help me I have installed star office on a networked computer where the users profile and application data is situated on a win 2003 server (roaming profiles and folder redirection) in a stand alone environment i.e no folder redirecti