Trying to get multiple clips to line up & be exactly the same size?
Hi, I'm trying to figure out how to get four clips to line up perfectly and be the exact same size. I'm able to do it manually by dragging out the corners of each clip, but I know it's not perfect. I feel like there has to be an easier way to achevie what I'm trying to do. Any help or ideas would be great. Thanks.
Dan
Powermac G5 Dual 2.3 Mac OS X (10.4.8)
You want all the clips to be 50%. One one clip into the Viewer and in the Motion tab set the Scale value to 50. Copy the clip. Select all the other clips and use Edit>Paste Attributes and check Basic Motion.
Similar Messages
-
How can I edit multiple clips with different frame rates on the same timeline
how can I edit multiple clips with different frame rates on the same timeline
You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x -
I use a gmail account for my mail. When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file. help
Did you check your user name and password in Settings>Mail,Contacts,Calendars...tap your email account, tap SMTP, then tap the primary server name. Make sure the settings there are correct.
-
Is it possible to output multiple clips from a multitrack session, at the same time?
I'm using Audition CC 2014.2
on Windows 7 Pro x64
I am trying to figure out how to output several clips from a multitrack session, at the same time.
A session like this:
Is it possible to output 5 files right now?
I can select each one (or even multiple) and use File > Export > Multitrack Mixdown > Selected Clips to do one at a time only.
I'm hoping for a way to give each clip (or group of clips) a predefined filename, by perhaps using markers or something like that, which would then allow me to faster "automate" the exporting of each section into a different sound file.
This ability would be really helpful when using a single multitrack session to generate multiple sounds and a change to globally applied effects is made and all sounds now need to be updated.
Any ideas?They are, yes, but I'm also working with multitrack sessions using clips made from various different sound files.
Ahh ok, use markers?
So, this sort of thing isn't possible in multitrack mode then?
If not, it sounds I'll have to "mix down" my multitrack session into a single file and set up the markers in Waveform Edit view.
That's an extra step I'd have to do, and after editing the multitrack session, surely some markers . . . oh wait, no . . . every time I output the new mix down file from the multitrack I'd need to redo all the markers. Drat . . .
Honestly, I am very new to Audition, but I'm about to plow into it, big-time, and I'm hoping for a nice non-destructive and fast workflow that'll enable me to output sets of sounds from the same multitrack session.
But, it seems like this functionality is currently missing. -
Getting two midi threads to start at exactly the same time
Hello, is it possible to get two threads to start at exactly the same time because when I start two threads or more at the same time that playback midi using a synthesizer, they never start at exactly the same time.
Any help would be appreciated.Use the Behavior framework for making changes in the scene. This uses an internal j3d thread which is in sync with the rendering thread.
See chapter 4 (Interaction) and 5 (Animation) in the 2nd module of the j3d tutorial (this may not be the correct chapters, since i have a rather old version of the tutorial) -
Trying to get multiple cell values within a geometry
I am provided with 3 tables:
1 - The GeoRaster
2 - The geoRasterData table
3 - A VAT table who's PK is the cell value from the above tables
Currently the user can select a point in our application and by using the getCellValue we get the cell value which is the PK on the 3rd table and this gives us the details to return to the user.
We now want to give the worst scenario within a given geometry or distance. So if I get back all the cell values within a given geometry/distance I can then call my other functions against the 3rd table to get the worst scores.
I had a conversation open for this before where JeffreyXie had some brilliant input, but it got archived while I was waiting on Oracle to resolve a bug (about 7 months)
See:
Trying to get multiple cell values within a geometry
If I am looking to get a list of cell values that interact with my geometry/distance and then loop through them, is there a better way?
BTW, if anybody wants to play with this functionality, it only seems to work in 11.2.0.4.
Below is the code I was using last, I think it is trying to get the cell values but the numbers coming back are not correct, I think I am converting the binary to integer wrong.
Any ideas?
CREATE OR REPLACE FUNCTION GEOSUK.getCellValuesInGeom_FNC RETURN VARCHAR2 AS
gr sdo_georaster;
lb blob;
win1 sdo_geometry;
win2 sdo_number_array;
status VARCHAR2(1000) := NULL;
CDP varchar2(80);
FLT number := 0;
cdl number;
vals varchar2(32000) := null;
VAL number;
amt0 integer;
amt integer;
off integer;
len integer;
buf raw(32767);
MAXV number := null;
r1 raw(1);
r2 raw(2);
r4 raw(200);
r8 raw(8);
MATCH varchar2(10) := '';
ROW_COUNT integer := 0;
COL_COUNT integer := 0;
ROW_CUR integer := 0;
COL_CUR integer := 0;
CUR_XOFFSET integer := 0;
CUR_YOFFSET integer := 0;
ORIGINY integer := 0;
ORIGINX integer := 0;
XOFF number(38,0) := 0;
YOFF number(38,0) := 0;
BEGIN
status := '1';
SELECT a.georaster INTO gr FROM JBA_MEGARASTER_1012 a WHERE id=1;
-- first figure out the celldepth from the metadata
cdp := gr.metadata.extract('/georasterMetadata/rasterInfo/cellDepth/text()',
'xmlns=http://xmlns.oracle.com/spatial/georaster').getStringVal();
if cdp = '32BIT_REAL' then
flt := 1;
end if;
cdl := sdo_geor.getCellDepth(gr);
if cdl < 8 then
-- if celldepth<8bit, get the cell values as 8bit integers
cdl := 8;
end if;
dbms_lob.createTemporary(lb, TRUE);
status := '2';
-- querying/clipping polygon
win1 := SDO_GEOM.SDO_BUFFER(SDO_GEOMETRY(2001,27700,MDSYS.SDO_POINT_TYPE(473517,173650.3, NULL),NULL,NULL), 10, .005);
status := '1.2';
sdo_geor.getRasterSubset(gr, 0, win1, '1',
lb, win2, NULL, NULL, 'TRUE');
-- Then work on the resulting subset stored in lb.
status := '2.3';
DBMS_OUTPUT.PUT_LINE ( 'cdl: '||cdl );
len := dbms_lob.getlength(lb);
cdl := cdl / 8;
-- make sure to read all the bytes of a cell value at one run
amt := floor(32767 / cdl) * cdl;
amt0 := amt;
status := '3';
ROW_COUNT := (WIN2(3) - WIN2(1))+1;
COL_COUNT := (WIN2(4) - WIN2(2))+1;
--NEED TO FETCH FROM RASTER
ORIGINY := 979405;
ORIGINX := 91685;
--CALCUALATE BLOB AREA
YOFF := ORIGINY - (WIN2(1) * 5); --177005;
XOFF := ORIGINX + (WIN2(2) * 5); --530505;
status := '4';
--LOOP CELLS
off := 1;
WHILE off <= LEN LOOP
dbms_lob.read(lb, amt, off, buf);
for I in 1..AMT/CDL LOOP
if cdl = 1 then
r1 := utl_raw.substr(buf, (i-1)*cdl+1, cdl);
VAL := UTL_RAW.CAST_TO_BINARY_INTEGER(R1);
elsif cdl = 2 then
r2 := utl_raw.substr(buf, (i-1)*cdl+1, cdl);
val := utl_raw.cast_to_binary_integer(r2);
ELSIF CDL = 4 then
IF (((i-1)*cdl+1) + cdl) > len THEN
r4 := utl_raw.substr(buf, (i-1)*cdl+1, (len - ((i-1)*cdl+1)));
ELSE
r4 := utl_raw.substr(buf, (i-1)*cdl+1, cdl+1);
END IF;
if flt = 0 then
val := utl_raw.cast_to_binary_integer(r4);
else
val := utl_raw.cast_to_binary_float(r4);
end if;
elsif cdl = 8 then
r8 := utl_raw.substr(buf, (i-1)*cdl+1, cdl);
val := utl_raw.cast_to_binary_double(r8);
end if;
if MAXV is null or MAXV < VAL then
MAXV := VAL;
end if;
IF i = 1 THEN
VALS := VALS || VAL;
ELSE
VALS := VALS ||'|'|| VAL;
END IF;
end loop;
off := off+amt;
amt := amt0;
end loop;
dbms_lob.freeTemporary(lb);
status := '5';
RETURN VALS;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001, 'GENERAL ERROR IN MY PROC, Status: '||status||', SQL ERROR: '||SQLERRM);
END;Hey guys,
Zzhang,
That's a good spot and as it happens I spotted that and that is why I am sure I am querying that lob wrong. I always get the a logic going past the total length of the lob.
I think I am ok using 11.2.0.4, if I can get this working it is really important to us, so saying to roll up to 11.2.0.4 for this would be no problem.
The error in 11.2.0.3 was an internal error: [kghstack_underflow_internal_3].
Something that I think I need to find out more about, but am struggling to get more information on is, I am assuming that the lob that is returned is all cell values or at lest an array of 4 byte (32 bit) chunks, although, I don't know this.
Is that a correct assumption or is there more to it?
Have either of you seen any documentation on how to query this lob?
Thanks -
How to get multiple output formats for each execution of the report?
Hi,
Is it possible to get multiple output formats for each execution of the report? If so can you provide some details?
ThanksIn Reports 6i, Reports Distribution was introduced. This allows you to run the report once and output to a number of destinations with a different format. It also allows you to distribute individual sections within a report to different destinations in different formats.
The Destinations for a Report to distribute to are defined either in a distribution file and passed on the command line or inside of the report definition.
To add a destination to the the report definition, bring up the property palette against the report object and then select the "Distribution" property under the "Report" node. This will bring up a dialog that allows you to create a distribution list. You can then test this list by selecting "file->distribute" from the menu.
To run a report that is to be distributed through rwrun60, you need to add "distribute=yes" to the command line. It will pick up the destinations from the report definition. If you add "destination=<filename>" then it will pick up the destinations from the specified "<filename>" and ignore the destinations in the report definition.
Note: if "distribute=yes" is specified on the command line then the destype/desname/desformat parameters will be used to format the report (ie: which printer/display to use during formatting for sizing objects) but will be ignored when the report is sent to the destinations. -
How can I get "IMAQ Line Fit" stable (with the same points)
How can I get "IMAQ Line Fit" stable (with the same points)
I my vision applications I use a lot off times "IMAQ Line Fit"
some times the results are not Stable.
See vi and word document attached.
When I take the same points but in a other order (sort)
then suddenly all points are used.
In this case I was looking for a edge in vertical direction (Y).
I found the points but "IMAQ Line Fit" did not function well.
I tried changing all settings like pixel radius and minimum score and
also threshold and so on. But no result.
Then I sorted the points reversed and that worked. See vi.
I use labview Labview 8.6.0 and IMAQ machine vision.
Maybe this problem is solved in a newer version.
Please let me know.
Thanks
Attachments:
TEST-imaq-line-fit-86.vi 169 KB
IMAQ-Fit-Line-Problem-86.doc 230 KBThank You for your reaction Hossein,
This "one application" uses "Line fit" about 20 000 000 times a day.
about 200 will go wrong. With your setting the the "Line fit" for this occasion will work but others will go wrong.
A algorithm should be:
1e Stable, when using the same points and settings the result MUST be the same. How the points are sorted should not matter.
2e Accuracy
3e Speed
4e Testing. Is very difficult but al least close points and the same points and sorting ... should be done
NI now as made a " IMAQ Line Fit" Problem CAR (Corrective Action request) 298016.
so in the future there will be a update.
In the mean while a made a line fit which uses Bisquare option from Linear Fit.vi :
from C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\analysis\6fits.llb
This is a temporary fix because "IMAQ Fit Line VI" is not so stable.
Because outliers should be rejected only Bisquare does this reasonable.
This program does NOT USE "Minimum Score" and "Pixel Radius"
Valid fit = When there are enough points within Outlier_Distance.
Algorithm steps:
- Determine if line is more horizontal then vertical, Compare DeltaX with DeltaY
- If DeltaX <= DeltaY then SWAP X Y and later Swap back
- Sort Points at on X value
- First : Bisquare Linear Fit
- Calculate distances to the found line for all points
- Inliers: Points within Outlier_distance
- Outliers: Points outside Outlier_Distance
- Only use Inlier Points
- Check again if DeltaX < DeltaY then SWAP X Y later SWAP back again
- Second : Bisquare Linear Fit only with the Inlier Points
- Results are from the second fit
Warning : This Program is Not so accurate and Not so fast
See attachments it is in labview 8.6
If some has a improvement please let me know.
Thanks
Attachments:
svi_fit_line_Bsquare_and_draw.vi 18 KB
Fit_Line_Bisquare_Linear.vi 40 KB -
I tried to download a movie on my iPod touch but due to limited space, it did not download. Then, I checked my credit card online, and I found the money was already taken. How will I get it to download on another device with the same account? Also, I was wondering why they took my money even when it did not finish downloading let alone get downloaded?
Welcome to the Apple Community.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option which is revealed in the iTunes app on your iOS device by tapping the more button at the bottom of the screen. -
latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress.
Refer to EX11....
Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium -
iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
When trying to upload pictures from my camera I get this message although I have uploaded from the same camera in the past, "iPhoto cannot import your photos because there was a problem downloading an image."
Can you access the images with Image Capture (in your Applications Folder) ?
-
I'm trying to get rid of logmein. I threw away the entire application but I can't remove it from my overhead menu bar and the activity monitor tells me it's still running. How do I get rid of it completely?
Install it again and use the developers uninstall instructions
How to uninstall/install software on your Mac -
My iPad has a white screen after trying to restore. I try and restore again and the same thing happens and we are back at the white screen. How can I get it back?
type HT4097 in the search bar. its unable to update or restore iOS. Follow the instructions and if that does not work then id go to the local apple store.
-
Itunes 11.4.0.18 crashing when clicking on app store
Itunes is getting crash when clicked on app store. I tried to get some information for this crash and got the above message in debugging mode. Please fix this if required but i am unable to open app store.Click here and follow the instructions to change the iTunes Store country.
(97125)
Maybe you are looking for
-
I am no longer an admin on my computer
I have a Macbook Pro with Leopard (OS X 10.6.4) and I was going to change the nickname in advanced settings. I deleted the name, accidentally hit back. When I went to change it again I clicked on the button and my highlighted full name deleted itself
-
Pls help me on how i can activate my imessage and facetime. Ive already tried to reset my iphone, done turning my iphone on and off, done turning on and off my settings and also tried time zone as suggested by others also tried to change my DNS setti
-
Converting from Tcl to Java...need to decode passwords stored in DB
Hello: I am converting an application that was previously coded in Tcl/Vignette to Java. Part of this application is a login process. There are already passwords established for thousands of users and I need to be able to have Java decode these passw
-
Where is the subwoofer on the envy 14
the hp site says the envy 14 has a subwoofer. http://www.hp.com/united-states/campaigns/envy/envy14.html Where is it because I sure can't hear it
-
greetings, my company got licenses for the oracle database recently, the database version we have is 10.2.0.1 i would like to upgarde to 10.2.0.3. i went to metalink and start trying to use it but i couldn't understand what to do... if some one can p