Trying to get Sony HDR-XR100 files (.MPG) on FCP! Please help!
I've purchase Final Cut Pro to edit video coming off of a Sony HDR-XR100 Camcorder. I can import all of the video files (.MPG) to FCP, but when I play them there's no audio.
And when I try to play them from the canvas it simply says "Unrendered."
Is my program set to the wrong default codec? How do I find the proper codec to set it to?
I was also told that there may be a plugin on the sony website to solve this problem, but I haven't been able to find anything that looks like this ...
What should I do?
Thanks in advance!
Hi -
Why don't you do a test file and see if it works for you before you do the whole bunch.
Download MPEG Streamclip and launch it.
Drag one of your mpg files to the square in the center of the window.
Go to the file menu and choose export to Quicktime:
!http://www.spotsbeforeyoureyes.com/MPEG_StreamclipExport.jpg!
Set your settings like this:
!http://www.spotsbeforeyoureyes.com/MPEGStreamClipDV.jpg!
and convert a file.
Then open FCP, go to the menu Final Cut Pro > Easy Set Up and choose Format: All formats, Rate: All Rates, Use: DV-NTSC.
Then open a new project and import your test file,
Create a sequence and you should be good to go.
You'll have to find info on the batch process part.
Hope this helps.
Mtd
Similar Messages
-
please help I just purchased an I phone 5 and I cant figure out how to get my files from my 3gs.
I'm not very computer literate, please helpYou should have been syncing your iphone with your computer regularly.
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device -
ERROR message! importing Motion files back into FCP. please help.
ok...so i started my project, everything worked seamless from fcp to motion and back...and then bam! error: 1 file recognized, 0 access denied, 1 unknown. ive done everything that i know, ive reinstalled, fcp studio and operating system...ive been over every setting...ive deleted preference files, repaired permissions... now my old motion files that were created before the error message still import just fine...can anyone help? i hate to outsource something i can do myself...
thank you.
gdhHave you tried changing the extension on the motion file? You can label it .mov and see if FCP recognizes it then.
Andy -
I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)
I had the exact same problem
It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable -
Unfortunately, I keep getting the error "can not connect to iTunes. Code:0" I've tried rebooting, signing out of my apple ID, can someone please help or advise me on what to do? Many thanks, Ryan
hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo
-
I can't no longer access Itunes. Keep getting error message 127. I tried uninstalling Itunes, but can't. So frustrated. Please help.
First, if you've moved the iPhoto library to an external drive, make sure that drive is mounted by opening it in the Finder.
The issue can be caused by sharing the photo library on a network (against Apple's advice) or by opening it in more than one local user account at the same time. You may be able to clear the error by logging out or restarting the computer. If not, do as follows.
Quit iPhoto if it's running, locally or on any file-sharing client. Select the iPhoto Library in the Finder. Usually it's in the Pictures folder, but you may have moved it somewhere else. Right-click or control-click the library icon and select
Show Package Contents
from the popup menu. In the folder that opens, navigate to
Database/apdb/lockfile.pid
and move that file, if it exists, to the Trash. Close the Finder window.
Credit for this observation to ASC member Elijahg. -
I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.
Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara -
My Bluetooth has disappeared and I have tried just about everything on the internet. When I click on Bluetooth file exchange it says hardware not found. I tried resetting everything as well nothing is working for me please help because now my facetime doesn’t work neither does photo booth and now I cannot text people off my laptop unless they have iMessage.
If you followed the instructions in the support article exactly (leaving the machine off for two minutes), then it has a hardware fault. Take it to an Apple Store or other authorized service provider for repair.
-
I dropped my iPhone and i tried to turn it on but it only comes on at curtain times. And it turns back off when I drop it just a little bit. Sometimes it takes like three days to turn back on. How do I get it to work regularly again?? Please help!!!
Seems like there is some physical damage causing an intermittent issue of the iPhone being unable to power on.
You could try a reset:
- hold the home button and sleep/wake button down at the same time
- the iphone will turn off(keep holding) then when the Apple logo appears release both buttons
If the reset fails I would suggest next time it powers on to try and back it up to either iTunes/iCloud then you can try a restore to factory settings or just back up and book an appointment at an Apple Store to have the iPhone evaluated.
All the best -
I am trying to stream music from my iMac using iTunes music files to my Cocktail Audio X10 music streamer. I have allowed my files to be shared the X10 sees the files but when I try to accsess them it gives me the message files not mounted. Please help?
No, I have the music I want to move from the laptop to the phone selected. Then I go under file, devices, and try to click sync but it is not available to click.
-
i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me
While YOU may not have attempted to jailbreak the phone, SOMEONE ELSE did. Error 1015 occurs by attempting to restore a previously jailbroken phone.
It's very likely you may NEVER get your phone out of recovery mode and your phone may be rendered permanently bricked.
Terms of Use of this forum prohibit the discussion of jailbroken phones. You'll have to scour the internet for a solution to your problem, if indeed one exists. -
Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?
haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.
-
"Error check activation" is the message I get when pulling a book from the library. My computer is authorized (per the ADE screen) I have tried un-authorrzing and re-authorizing but nothing works. Please help
I am having the same problem, and my computer is authorized through my Adobe ID and I cannot open any books. I tried downloading a book from the university library, using my ID, the book is in ACSM format, and I cannot open the book because it keeps telling me
"error check activation" I am including screen shots to show my computer is authorized. -
Can't get macbook past spinning ball at start up.PLEASE HELP
"Can't get Macbook past spinning ball at startup. PLEASE HELP"
Older mac book with (?? 10.5.... ??) Froze up. Force Quit "Kindle", "Sketch up" and "Safari". Have tried to use safe boot but after 5 min. of holding shift key the SBOD (Spinning Beachball Of Death) was still spinning away. Tried to load Mountain lion by means of disc---Didnt have original disc for this macbook; inherited it from deceased family member 2 yrs ago--- but couldn't get past SBOD there either. I am willing to erase all on mac book in order to get it up and running again since all my vital files are in my Mac (desktop) and primary use of macbook tends to be internet use.You could try installing Snow Leopard on the Macbook. Installation DVD is available from Apple:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Are you sure the MB meets the requirements for Mountain Lion?
http://support.apple.com/kb/ht5444 -
Installed YOSEMITE. Lost entire iPhoto Library on my iMac. Tried Apple's UPGRADER 6 times. No LUCK. Please help.
Your iPhoto library is usually kept in your pictures folder. Did you look there? If it is still there then you did lose your photos. Just need to get the iPhoto app at the latest level.
Maybe you are looking for
-
How to add prefixes to xml output?
Does anyone know a quick and easy way to add a namespace prefix to an xml document when you output it as a string? i'm looking for somethinglike this. <Order xmlns="http://www.something.com/name"> <item>sink</item> <Order> converted into <dof:Orde
-
I need to email sales orders as PDF files. Is there a fairly easy way to do this? I have the "SAP" email function working, Just need to send the form as PDF instead of JPG. Thanx, Tim Pope
-
After upgrading to IOS 7 (7.0.2) I have run into a perplexing problem where I am seeing duplicate notes with my iPhone when syncing my notes to MS Outlook 2010 (using MS Exchange on the backend, if that makes much difference). Prior to IOS7, I was a
-
Why movies take so long to download
We have an Apple TV that never allow us to enjoy a movie right away when we rent or buy. It always shows a message saying that it will take 20 hours to be ready to watch. This is very frustrating! I'm sure somebody has either experienced this prob
-
How do i authorize my computer to ipad?
How do i authorize my computer to ipad?