Trying to keep IE out of "quirks mode"

I was told that if I used HTML 4.01 Strict for my DOCTYPE, it would prevent IE from going into "quirks mode." However, after doing that and trying to validate the pages, I got dozens of errors. Most concerned closing some tags with " />" instead of just ">"  Even after fixing all those there were numerous errors left. Was I mis-informed? Is there reallyl a way to keep IE from going into quirks mode?

I was told that if I used HTML 4.01 Strict for my DOCTYPE, it would prevent IE from going into "quirks mode."
You were misinformed.
You merely need to use a complete and valid (as opposed to incomplete or broken) Doctype.
Several are available to you
http://www.w3.org/QA/2002/04/valid-dtd-list.html
The simplest is:
<!DOCTYPE html>
However, after doing that and trying to validate the pages, I got dozens of errors. Most concerned closing some tags with " />" instead of just ">"
XHTML doctypes require self-closing tags for HTML tags (such as <img> which don't have a corresponding closing tag pair e.g. /> rather than >.
What is the address of your website?

Similar Messages

  • Im trying to restore my iphone 4S, however i keep getting error 1611!, i have tried kicking the iphone out of recovery mode but then i have another problem, it gets stuck on the apple logo for a few seconds then the low battery symbol shows repeatdly HELP

    Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!

    Jai141 wrote:
    ... and im not sure as i brought the phone of someone else..  i will have to ask them
    Good Luck.
    Jai141 wrote:
    Thanks
    You're Welcome.

  • IPhone 4 keeps going out of DFU mode when trying to reset

    So I was helping my dad with his iPhone 4. It just stopped working from time to time.
    When I tried turning it back on at those times, it just stops at the recovery mode screen. I then tried having it plugged in while I had iTunes up, but that didn't help. Error 21, iTunes said.
    So I tried putting the phone in DFU mode and then resetting it to factory settings. But during the reset - when it tried to contact the Apple servers - the phone went straight from DFU mode to Recovery mode which gave me the error 21 again.
    I've tried all of the tips in the help section (making sure that the computer was up-to-date, I made sure the security program was turned off etc, I deleted the ipw and had iTunes download it for me again), but that didn't help either. I even tried to start iTunes as an administrator, but that didn't help either. The account on the computer is also an administrator.
    So what should I do now?

    http://support.apple.com/kb/TS3694#error21
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

  • My Iphone keeps coming out of recovery mode before Im done

    anyone know how to make your iphone stay in recovery mode till its done restoring

    Hi eli238,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Use recovery mode
    Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
    Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
    Plug the device's USB cable into your computer only.
    Hold down the device's Home button as you connect the USB cable to it.
    When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
    iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    Use iTunes to restore your device.
    If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • My firefox keeps coming out of maximized mode. There is no action that triggers it. But it happens in less than a minute.

    Addons I use:
    addblock plus
    ant video downloader
    fire gestures
    new tab king
    web developer

    My answer is probably not what you're looking for, but that hasn't stopped me yet ;-)
    I used the Apple imaging tools for years, sometimes without a hitch, sometimes successfully after searching these forums for tips becasue the tools didn't work straightforward, and sometimes with no luck. 2 or 3 years ago we hired a consultant to help out with imaging. They went right to DeployStudio. I've not touched Apple's imaging tools since.
    DeployStudion's documentation is great, there is a good firum at their web site, and I've found the process to be much more stable than any version of Apple's tools. Once it is set up and running, adding new images and workflows is a breeze, and it is easily configurable. I highly reccomend it. YMMV.
    http://deploystudio.com/Home.html
    Jeff

  • 6230i keeps coming out of "car" mode in cradle

    Sorry, but I don't know what cradle I have as the kit was installed by my employer. When I put the 6230i in the cradle it recognises it and goes into hands free mode. After 30 secs or so it goes back into hand held mode. If I press the remote Nokia button on the dash it goes back to hands free but only briefly. Any ideas?
    Thanks in advance.

    Sounds like the engineer has taken power from the back of the radio and you have a car with a can bus system (no ignition wires). To cheat he has use power antenna connection. I would seriously doubt this engineer capability. If you need a good engineer in your area let me know.
    Danny b
    Nokia Accredited Installer
    If my answers help you, give me a Kudos. Its like a pat on the back.

  • How do I get my iPod 1st Gen out of recovery mode when it gives an error message (1)?

    I tried to restore my iPod 1st generation and while restoring it got stuck in recovery mode. I tried to get it out of recovery mode by (restoring and updating) but it would say (extracting software) and then would show an error message (1) saying-
    What do I do now?????????????????

    ERROR (1)
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Try another cable           
    - Also, confirm your security software and settings are allowing communication between your device and update servers.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     

  • My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!

    My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!
    I have tried to hold the "home" and "power" button to reboot
    I have tried powering it off
    I have tried, to unplug the cable, hold the "home" button and then plug it in.
    Can't check the SN or warranty, cause it is stuck in restore mode.
    Is the hard drive gone? Should there be something replaced.

    http://support.apple.com/kb/TS3694#error1
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice.

  • HT4623 I tried updating to iOS6 via itunes bc my storage space was pass limit and now my phone is telling me it's in recovery mode and I need to restore it. I didn't back it up. How do I take it out of recovery mode and keep the information on my phone?

    I tried updating to iOS6 via itunes bc my storage space was pass limit and now my phone is telling me it's in recovery mode and I need to restore it. I didn't back it up. How do I take it out of recovery mode and keep the information on my phone?

    You cannot.  If it is in recovery mode, the data is already gone.
    Did you fail to make sure everything was on your computer before updating?

  • Can anyone help me!!! i have an i pod touch and the 4 digit passcode has been forgotten. i have tried a number of times to restore the factory settings on i tunes and have put the i pod into recovery mode, but attempts keep timing out

    my son has forgotten his 4 digit pass code for hios i pod touch. i have been instructed to disable it and connect to i tunes to restore factory settings. when I do this the download time is anything up to 20 hours and it keeps timing out. it is now saying that i tunes cannot connect to the i pod because it is locked with a passcode and saying that i must enter the passcode - can anyone help?

    - To get around the passcode issue, place the iPod in recovery mode. For how to see:
    iPhone and iPod touch: Unable to update or restore
    - If you are getting a network timeout error during the restore, disable the computer's security software during the restore.

  • Someone keeps putting my iPhone into lost mode in my other cloud account, and I keep getting out. How do I switch the cloud account to this one, so they won't be able to do it again

    Well, for the last week someones been putting my iPhone constantly in lost mode using my apple account and I keep getting out because I know my own password. I want to change the password but two other people I know use it, (who definetly wouldn't do this), someone else probably got ahold of the account and is spamming the phones into lost mode. I'm not in lost mode currently by the way. This repetition is really a hassle for me because I'm not always connected to the internet to get out of the lost mode, a few days ago, I went on a 12 hour flight and both my apple devices were probably put into the lost mode and I wasn't able to use my iPhone or iPad to do work and entertainment purposes. I was literally sitting there for 12 hours! So now that you sat through my problem, which I thank you for greatly, how do I switch apple/cloud accounts on my devices so this won't happen again? I hope you can give my solution, if there is one out there, and thank you in advance for atleast trying to solve my problem.

    The only way this can happen is with access to your id and password
    Read this and focus on "changing your Apple id"
    http://www.apple.com/support/appleid/manage/

  • HT201210 I have followed the restoration guidelines mention here but I keep getting the same error; 2009. At the end of my tether and don't what else to do as my phone can't get out of restoration mode. My computer is HP DC500 running Windows XP Pro with

    I was updating my iPhone 3g from iOS 4.1 to 4.2.1 when suddenly I lost network connection and the process failed. I have since tried to restore my iPhone 3g with no luck. I keep getting the error code 2009. Which instructs me to check my computer is up to date and all third party security software are turned off. I have done all these pulled out all usb devices but for the one that is my internet modem. I am running Windows XP Pro SP2 on HP DC500 minitower. How do I get out of restore mode. Thank you kindly.

    Not sure if you were told what error 2009 is caused by so I'll let you know if you havn;t been informed. In the article http://support.apple.com/kb/TS3694 is says:
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

  • HT5642 my ipod touch 5th gen is not recognized since I tried to update ios. It says it is in recovery mode but it just keeps looping back to recovery mode. I tried holging power button for 3 sec. then both home and power for 10 sec then home button for 20

    My ipod touch 5th generation went into recovery mode when I tried to update ios. When I try to recover it just keeps looping back to recovery mode. I tried to hold the power button for 3 secs. then simultaneously hold the home button for 10 secs. then hold only power button for 20 secs. I tried this several times to no avail. This is my daughter's ipod. I am computer illiterate and I'm not sure what else to try.

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • How do i get my ipod touch out of recovery mode......keep getting error message saying ipod could not be restored an unknown error occurred

    How do i get my ipod touch out of recovery mode......keep getting error message saying ipod could not be restored an unknown error occurred.
    Been trying all night to sort out but just going around in circles

    I have not seen a solution for that error but try:
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • I've tried everything to get my phone out of recovery mode but nothing is working.

    Hi,
    I recently started updating my phone to I.O.S 8.1.3, and it was downloading and updating fine, then it said it had an error updating. I turned it off and on again to see if that would work, and when I clicked install it showed up as if it was turning off. It then showed up that I needed to connect to iTunes. So I did, and it said it was in recovery mode, and that I needed to restore. So I tried that and it said multiple times, when I got part way through the restoration, that the network had timed out when it hadn't. So I researched ways to get it out of the recovery mode.
    I've tried:
    holding down home and lock button
    holding down lock and volume button
    downloading tinyumbrella, however it wouldn't let me open it
    Putting it into DFU mode and restoring
    Nothing is working! I don't know what to do, I need my phone for when I'm travelling and now I don't have one.
    Anyone got any more ideas? I'll be incredibly grateful.
    If I can't get this to work I've wasted £200 of money on a phone that decides it's logical to kill itself. I won't be doing that again.

    I was trying to download TinyUmbrella because some people have said it basically kicks phones out of recovery mode, and I did try that but it hadn't worked, it kept loosing connection with the phone even though it was connected.
    I took the phone to the O2 shop and they did something to restore it, so it's working fine finally thanks for replying!

Maybe you are looking for

  • Proforma invoice number is not in the document flow of the order.

    Hi all, I have a doubt , if i create an proforma invoice based on order, and after that i create delivery and billing, i cannot able to see the  proforma invoice in the document flow of the particular order.   pls guide me on this Thanks all Kumi

  • Upgrade from 3.0B (release 620) to BI 7.1 (release 710)

    Hi, Please guide me whether it is possible to upgrade from BW 3.0B system to BI 7.1, I am in release 620 now. Can you please help me locate upgrade guide for the same? Looking forward for your replies Thank you Rajath

  • Mac Mini and WD My Book Duo RAID drives not mounting?

    I have two of these My Book Duo drives connected via USB to my Mac Mini (late 2012), running OSX 10.9.5. The drives are both configured as RAID 1, one has my iTunes and other media, the second one is the Time Machine backup disk. Last night when I re

  • Check In using webdav

    Hi, I intend to use the webdav interface to check in documents. I have defined mandatory custom attributes whose values vary a lot from document to document. Is it possible to supply a check-in form to the user, so that it can fulfil the values of th

  • Spry region XML issue

    I'm developing an interactive menu using the Spry and Ajax framework that lists the menu items on the left (in a Spry accordion) to a corresponding image and description on the right. I have the basic functionality working, however, my menu items are