Trying to link to a specified frame

Hi
first of all sorry for my english ;-)
i konw that its possible to link from a html link, via
javscript, to a
specified frame in a swf, but im looking since yesterday and
cannot find
something to help me ( yes i found something like this but to
communicate 2
swf movies, but i wanna link a html link to swf frame) ?
best thx

On 27/2/08 11:50 AM, "Kelly Vaughn" <[email protected]> wrote: > tell page item > set vertical scale to -(get vertical scale) > end tell > > VERTICAL SCALE was highlighted: "An identifier can't go after this identifier" The problem is in the previous line; you need to specify *which* page item (ie, something like "page item 1"). > Did I put the code in the correct place? Can you give a little detail about > what your code does? When you flip something vertically in the UI, all that happens is that the object's vertical scale is made negative. So the code does the same thing, directly. -- Shane Stanley <[email protected]>

Similar Messages

Linking to a specific frame from JSP page

I am trying to link to site that has frames. I want to load a specific jsp in frame 3. Does anyone know how to pass the target and source values? I have been looking for tutorials unsuccessfully.

You can not point to a specific frame ina document from an external document.Your best bet might be to pass the parameters using URL and on the recieving end write some javascript to parse the url adn if it has a parameter then process that else just load standard document.
Khalid

Multiple thumbnails linked to one pic. frame?

Hi, i am a beginner, so go eazy on me,
I am trying to link multiple images (thumbnails) to one big
picture frame.
So if you click the thumbnails, each will blow up in the same
frame.
The easy solution would be to link to a table, but it doesn`t
seem linkable.
I tried different slide viewers but I cant personalize them
enough.
Please sombody help me!

There are a few ways:
Google Disjointed rollovers
Set Text of Layer
Swap Image in the Behaviors Panel
Hope this helps
Jo
"serestibi" <[email protected]> wrote in
message
news:fpgc4m$9tj$[email protected]..
> Hi, i am a beginner, so go eazy on me,
> I am trying to link multiple images (thumbnails) to one
big picture frame.
> So if you click the thumbnails, each will blow up in the
same frame.
> The easy solution would be to link to a table, but it
doesn`t seem
> linkable.
> I tried different slide viewers but I cant personalize
them enough.
> Please sombody help me!
>

Opening an swf to a specified frame

Hi,
I'm trying to link from a document that I am creating in Dreamweaver to a specific frame of an swf file (a page of a document produced in InDesign).
Any way to achieve this?
Thanks,
James

James,
I'm wondering if you need to reference the SWF at all. Do you have access to theoriginal InDesign document? If so, why not export that single page (which I presume is the content for your targeted frame) to a PDF and then link to the new PDF file? Or you could even export that page as a JPEG and insert it for your link trigger.
Just a thought.
Chris

I have two iTunes accounts. When I view account info on a older account that I seldom use. It indicated that it was associated with one device;I.e., my IPad. Ian trying to link it to the other account instead

I have two iTunes accounts. When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad. I am trying to link it to the other account instead

johnfromnorth andover wrote:
I have two iTunes accounts
Why?
When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad. I am trying to link it to the other account instead
You want to uise the newer account with the iPad?
Settings > Store.
Tap account, sign out then sign in with the account you want.

How do I fix problem with linked and cropped image frames not printing properly when spanning pages?

We are using InDesign (ID) to develop and print church bulletins which contain a combination of text frames and graphics. One of the graphic types we use are TIF files which are high-resolution scans of hymns.
A hymn usually has a combination of the musical score, plus the lyrics - with many verses., so the modular structure is 'staff' composed of a treble clef, followed by verses, followed by a base clef.
If the example above had 6 verses instead of one, we would crop the image by adjusting the frame, so that the treble clef and the desired verses showed through the frame.
We would then copy and link the frame - piggy back - adjusting the next content window etc....so we build a custom version of the music as a series of linked frames - each with the same base image, but a different frame position.
So this works fine, when we do this on a single page, but when we then add a 'last staff' at the top of the following page, we encounter print problems with some output devices.
Imagine a two-page spread, with a full page of music on the left, and the last staff (treble clef, verses, base clef) unit as a separately linked frame at the top of the right page of the spread.
It displays correctly, and will print individually as pages correctly, but when we print it as a booklet, the last frame drops out and we have blank space.
I can print the document to PDF and it works fine, but if I print it to a copier or laser printer I get drop out.
It is inconsistent.
Previews are always okay. Individual page prints are okay, but when you print the entire document, the last frame in this kind of linked series gets blanked.
If we create and name the image differently, and call it in as a new image - (not linked to the previous), but it is still a large image that is cropped to a small piece, then it doesn't print.
If we save the last frame as a different image type (take the TIFF file into photoshop, crop it and save it as a jpg - so it is only the 'snippet') and then import it, it works fine.
So my question to you InDesigners....is there some setting or tip or trick I need to know to be able to link a series of frames with the same base image, but different crops and make it span across two pages properly.
Or do we need to play this game of crop and trim the image so that it doesn't drop out?
Any thoughts, advice, direction would be gratefully received!

I did a lot of such hymn things in the past, but I was alway working on the scans in Photoshop, like adjusting, retouching spots and cropping. And I was always seperating those images to be more flexible so I never run into such a problem.
I am always scanning in a higher quality level than I would need, I scan it in color, this allows me to eliminate paper color easily, even if I need 1-bit images at the end, I do it in color, so I can also turn the image.
I did once run into a similar problem with a scan I have got from a copier-scanner machine (it was not a song). But saving as PSD resolved my problem.
So I would suggest: Open your files in Photoshop, resave them as PSD files and use those instead. If you use 1-bit images (which is fine for this type of images) you should use a resolution equal to the printer's resolution.

Hi, I am trying to link my Ipad to my email account, and keep getting a message to click on the link to verify the email account is my own, however I am not seeing a link to click on. Please help.

Hi, I am trying to link my Ipad to my email address, but I keep getting a message to click on the link to verify the email account is my own, however I am not seeing a link to click on to. Can someone please help me?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

I am trying to link to page in my document from the table of contents. How can this be done?

I am trying to link to page in my document from the table of contents. How can this be done?

The Table of Contents picks up selected named Styles in the text like Head 1, 2 etc.
Have you actually applied the styles?
Peter

Trying to link EIPO foreign trade data to VBAK,LIPS,LIKP,KNA1,TVROT

Hi
I am trying to link table EIKO - Foreign Trade data on delivery item data to my existing Quickview which has the following tables,
VBAK - Sales Doc header
LIPS - Delivery item
LIKP - Delivery header
TVROT - Route
KNA1 - general data in customer master
But when added SAP says 'no relationship Found'
Do i need to add another table as a common link ?- if so which one?
Many thanks for your help and advise
Tony

Hi
I'm not sure what you want to do. But the link is in EIKP-REFNR. With this field you can link to PO, deliv, invoice and so on.
I hope this helps you
Regards
Eduardo

Trying to link my email with a iPhone 5c

I'm trying to link my Tiscali email account with my mail app on my iPhone 5c. I input all the correct details and as i press save it pops up saying 'Cannot connect using SSL' 'Do you want to try setting up the account without SSL?'
If i press No then it goes back to the setting up account page.
If i press Yes then it saves the account and i recieve my emails. But it wont let me send any emails it just pops up saying 'Unable to send Email' 'A copy has been placed in your outbox. The sender address '[email protected]' was rejected by the server.'
Also a pop error message comes up on the odd occasion to. I've tried setting up this email on my iphone a few times now and ever time its failed.
Why is this happening?
I created the tiscali account ages ago before tiscali changed to TalkTalk. I have to go on the talktalk website to access my emails.
Thanks for any help.

you solved the initial problem by turning off SSL. The second problem is that you missed some detail in the outgoing server set up. Google "tiscali e mail set up" to get a fresh copy of the specific e mail parameters , and try again. Pay particular attentioon to the outgoing server name, and port. If it asks again for your name and password - do it - even if it says optional.
Some services are screwy enough that they have a wizard for installing on mobile devices. I dont know if tiscaki does, but check their website.

I am trying to link slides, a specific slides to specific lines. Every time I attempt to link, Keynote automatically links me to slide 10, despite my attempt to link to a slide other than slide 10

I am trying to link slides, a specific slide to a specific slide. Every time I attempt to link, Keynote automatically links me to slide 10, despite my attempt to link to a slide other than slide 10; any ideas why? Thanks

create a shape on the slide e.g. a circle
right click the shape and select Add Link
make sure you select a specific slide number (don't select first previous or next)

Button link to a specific frame in time line

Ok I have created my buttons and the content for the specific
frames. I have named the button and given it an instance name. I
have also given my specific frame a name and set that label type to
Name.
Whats the code for turning getting my button to link to a
specific frame?
I've also done the stop() code in each frame as I want it to
stop at each frame until the button is clicked again.
I have more than one button and each will link to a different
frame.
Thanks.

I've duplicated an FLA with exactly the assets you have in
the same places, with the code on the main timeline. And mine
didn't work, just the same problem as you had. The solution I
proposed above works, but it is not the only way (See #2 below).
On Frame 1, select the UIScrollbar. if you look in the
Parameters tab of your UIScrollbar component, you'll notice that
the
scrolltargetName refers to
Instance_0. This is a default instance name assigned by the
Flash compiler, because you did not give your dynamic textfield an
instance, and your UIscollbar is referencing that. Now go to Frame
4. You will find that your dynamic textfield has the same instance
name, and the UIScrollbar is referencing the same instance. Problem
is, you have more than one textfield on more than one frame using
and referencing the same instance name, your UIScrollbars will get
confused as to which textfield is actually "Instance_0". The moment
you click to another frame, you've confused the UIScrollbar(s), so
they never work again.
The solution is simple.
First, put a stop() action on the first frame, if you have
not already done so, so your timeline stays put until you click on
a button.
Then you can solve the problem in one of two ways:
Give your textfields different instance names, and make sure
the
scrolltargetName property of each UIScrollbar refers to its
respective textfield.
Or set the text dynamically, which after all is what a dynamic
textfield is for. Have only one textfield/UIscrollbar combo, on the
first frame, and place code on a keyframe for each section which
changes the
text or
htmlText property of the textfield.
That should work. It did on mine.

URGENT: Media Offline, Trying to Link Media, still giving error: File Import Failure,No video stream

Media Offline, Trying to Link Media, pointed it in the right directory
But it still gives an error. It says the file has no video or audio streams
I have a project going on. Please help. Thanks

HI abhishah,
Thanks for posting on adobe forums;
Please provide me following details
Premiere pro CC or CS6
What is the OS and version ?
What is the Graphics Card installed on the system ?
How much Ram do you have ?
Do you use any external Hard Drive ?
and please try to copy the media file from the one location another without media, and make the media offline and save the project as a new project and try to open the new one, then try to link the media.
Thanks
Sandeep

I am trying to link coc between a new ipod and my iPad. The iPad was the old device. I did as I was supposed to by logging in the Game Center, then opening coc, and went thru the tutorial. The Game Center keeps trying to load the new village on my iPad an

I am trying to link coc between a new ipod and my iPad. The iPad was the old device. I did as I was supposed to by logging in the Game Center, then opening coc, and went thru the tutorial. The Game Center keeps trying to load the new village on my iPad and not the other way around. It basically is trying to make my old village the new village, meaning I lose a lot of progress. How do make it combine the 2? If I cannot, is there a way to remove the new village off the Game Center and add the one I want to be saved? Thank you.

You'll have to contact the app developer for help with this.

I got this message when I tried your link?

I got this message when I tried your link?
This Connection is Untrusted
You have asked Firefox to connect
securely to kazklub.com, but we can't confirm that your connection is secure.
Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to
this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
Technical Details
I Understand the Risks
If you understand what's going on, you
can tell Firefox to start trusting this site's identification.
Even if you trust the site, this error could mean that someone is
tampering with your connection.
Don't add an exception unless
you know there's a good reason why this site doesn't use trusted identification.

patrickfromgalax wrote:
I tried googling it, but all of the answers are from years and years ago. Can someone help?
Apparently you did not try googling it. People have been asking the same question repeatedly over the last couple of weeks in these forums.
Here is a posting with resolution from 3 days ago. https://discussions.apple.com/message/15078964

Trying to link to a specified frame

Similar Messages

Maybe you are looking for