Trying to mail user contents I type into textarea

Okay I have a form with a textarea that allows me to type
content. Whatever I type into the textarea named "mailcontent", I
want to mail that to someone. When I load this page with the form,
I keep getting this error message:
element MAILCONTENT is undefined in FORM.
What am I doing wrong here? I'm attatching the code. Don't
worry about the #confirmdelete.EmailAddress# as this works b/c I
have another form on this page as well.

Remove the CFMAIL from your page and put it in
coop_deleted_sendmail.cfm. The sequence of events (1) the user
enters the information into the textarea, (2) user clicks the
submit button, (3) coop_deleted_sendmail.cfm loads and processes he
CFMAIL tag, at which time it can see and use the value for
Form.mailcontent.

Similar Messages

  • Certain websites like Craigslist show a scrambled, blurry security word image that the user has to type into a field in order to submit an ad. With Firefox, the word doesn't show up in the field. I have to open Explorer to accomplish this task.

    When a user posts an ad on Craigslist, they are sent an e-mail with a link. Clicking on this link brings the user to a page where the ad content can be checked, and the last step is to retype the scrambled security word into a field. When I'm on Firefox, this word (which I'm assuming is an image file like a .jpg or a .bmp) does not appear.
    I just had this same problem on a website called Sailing Anarchy when trying to register a new account.

    If images are missing then check that you aren't blocking images from some domains.
    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    * Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
    * Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    * Check the exceptions in Tools > Options > Content: Load Images > Exceptions
    * Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Transaction MB01 we are trying to restrict user to only run Document Type U

    Dear All,
    In Transaction MB01 we are trying to restrict user in Document Type in Purchase Order and restriction is only user can create Document Type UB (Stock Transport Ord. )
    But I am create a dummy user and dummy role and assign MB01 to that role but it is not working I canu2019t understand why? What I can do wrong if nothing is wrong then what is the solution

    Document types also use the "authorization group" concept. You do not grant access to them individually, but rather protect groups of them and then grant the access back again.
    This means they are optional objects... --> which also implies that they are not the only objects...
    If a document type is not protected by an authorization group, then there is no check... --> except for the mandatory objects such as the movement type to actually use the document...
    This is normally explained, together with the customizing prerequisites, in transaction SU21.
    Cheers,
    Julius
    ps: Please do not duplicate-post the same question. To keep the forums tidy, we reject such posts.

  • Using JUnit to let user type into Swing components

    Our goal is to create a test suite in which the user, our customer, types into components in JFrames and experiments with these components. We wanted to enable him to play with a TestCase/JFrame until he closed the JFrame, and let AllTests do the next TestCase.
    We are NOT looking into automated Robots and recording.
    We found that when a TestCase contains a JFrame, and we do a frame.setVisible(true), the frame appears for a split second, and TestCase calls tearDown.
    We kluged a call to Robot.delay(60000). Ugly as it is, it does allow us to play with components in the TestCase! However, this kluge stops AllTests from running all of the TestCase's in its suite.
    Is there a way to throw up Swing TestCases one after another?
    Thanks,
    Matt

    Use BADI ME_PROCESS_PO_CUST

  • Instantiate com.waveset.object.Type into Type[]

    I am trying to instantiate com.waveset.object.Type into Type[]. I am trying execute method exportObjects(Type[] types, java.lang.String filename, BulkMonitor monitor). I can write it in java doing something like _wsSess.exportObjects(new Type[]{Type.findType(type)}, out, null); but having trouble doing in xpress or javascript. Please help. Thanks.

    Hi,
    To get all the types, you can use:
    <invoke name='getTypes' class='com.waveset.object.Type'/>
    to get specific ones:
    <block>
    <set name='typeList'>
    <list>
    <invoke name='getType' class='com.waveset.object.Type'>
    <s>Resource</s>
    </invoke>
    <invoke name='getType' class='com.waveset.object.Type'>
    <s>User</s>
    </invoke>
    </list>
    </set>
    <invoke name='toArray'>
    <ref>typeList</ref>
    </invoke>
    </block>
    hope this helps
    Regards
    Arjun

  • Receiver Mail adapter Content type issue

    Hello,
    I am formatting the body of the receiver mail. The body of the email  should look like below.
    Dear PI User,
    The following Interface has been successfully processed by the middleware PI system.
    Please do not reply to this email. If you need more information please contact the Super User.
    Regards,
    SAP PI Team
    The mapping looks fine and My source MT looks like this:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns1:MT_Mail_Reply xmlns:ns1="http://test.com/Mail/Reply"> 
    - <Reply>  [0..unbounded] 
    - <Item> [0..unbounded] 
    <MESSAGE>Dear Business User, </MESSAGE>   [0..1] 
    /Item>
    - <Item> 
    <MESSAGE>The following Interface has been successfully processed by the middleware PI system.</MESSAGE> [0..1]
    </Item>
    - <Item> 
    <MESSAGE>Please do not reply to this email. If you need more information please contact the Super User.</MESSAGE> [0..1]
    </Item>
    - <Item>
    <MESSAGE>Regards,</MESSAGE> [0..1] 
    </Item>
    - <Item>
    <MESSAGE>SAP PI Team </MESSAGE>  [0..1]
    </Item>
    </Reply>
    </ns1:MT_Mail_Reply>
    The mapping works fine without errors and I get the target message as below after mapping-
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30"> 
    <Subject>ISAP PI Interface Status</Subject> 
    <From>[email protected]</From> 
    <To>[email protected]</To> 
    <Content>Dear Business User</Content> 
    <Content>The following Interface has been successfully processed by the middleware PI system.</Content> 
    <Content>Please do not reply to this email. If you need more information please contact the Super User</Content>
      <Content>Regards,</Content>
      <Content>SAP PI Team</Content>
    </ns1:Mail>
    t
    The context of MESSAGE has been changed to Reply.
    In the adapter I still get the following error.       
    Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint  [null "null"]; nested exception caused by: com.sap.aii.af.sdk.xi.util.XMLScanException: expecting end tag: {http://sap.com/xi/XI/Mail/30}Mail, but found {}Content at state 1
    Please advise !!
    Thanks,
    Teresa
    **I changed the receiver mail adapter to not use Mail package and I receive an email without errors with the Content as mentioned above. **

    Hi Teresa,
    I think the problem is that you are using multiple "Content" tags. Have you tried to use only one?, you can concatenate all your text.
    Check the page 3 of this document to know how introduce new-line character http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0964d7c-e66e-2910-24bb-ac535e4a5992?overridelayout=t…
    Regards.

  • I am trying to create an account and I am unable to type into the password box.

    When I try to create a new account I am unable to type into the password text box. I can enter my email and I can type int he security wquestion box. I have Windows 7, the current version of iTunes and its a fairly powerful PC. Please help!

    Same problem.  Wasted 2 hours so far!  I use my personal email for registering all my HP products and can log-in to that fine. Trying to use same personal email for eprint seems to be problem. 

  • A have new problem that has appeared in my Mac Mail.  When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.

    A have new problem that has appeared in my Mac Mail.  When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.  I have gone to the window pop-down to 'previous recipients' and deleted that addressee as well as all the email addresses it is assigning to that name.  I have also deleted the account entirely from my address book.  I have have run repair permissions and also full defrag in iDefrag.  Still the problem persists.  Any suggestions?

    Hello CarolineLongEaton,
    I noticed you posted this problem quite a while ago and wondered if you managed to have it fixed in an alternative way then posting here. It is too bad no one has posted a solution here. I have a similar problem and if you have had yours solved since this occurance how you accomplished it may help me with mine. I am interested to know what you have done about yours.
    If you are interested in comparing the problems to see if your solution (if you have found one) might help me also then here is the link to the discussion.
    https://discussions.apple.com/thread/6116927
    If your problem has not been solved then I will comment here again if/when my issue is resolved as it may help you too. My hope here is that we may help each other. To quote you "all ideas gratefuly recieved". I hope your problem was resolved, ernestly for your sake and selfishly for mine also. I wish you and yours a great day!
    dofromon

  • Gmail on iphone was working fine until yesterday when it prompted me with the message cannot get mail user name or password for gmail is incorrect, i have tried deleting the account and re-created a new account, same problem, can anyone help?

    gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?

    paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday.  Thanks a million, take care. Robert.

  • TS3276 I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights.

    I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

    I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

  • OK! I am unable to type into any pages documents ... just started doing this. Tried opening new page ... no luck ... thries to edit a current paper... no luck!!! Help, anyone have an idea what I have done?

    OK! I am unable to type into any pages documents ... just started doing this. Tried opening new page ... no luck ... thries to edit a current paper... no luck!!! Help, anyone have an idea what I have done?

    Try a new post in the Pages forum. They would know better then us.
    DALE

  • G'day, i am trying to type into an adobe document using the typewriter function. However everytime after i type the text vanishes. It is almost as if the text is white and vanishes into the background. However this is not the case as the works are not vis

    G'day,
    I need some help, i am trying to type into an adobe document using the typewriter function.
    However every time after i type the text vanishes. It is almost as if the text is white and vanishes into the background.
    This is not the case as the works are not visible regardless of the background color.
    The text box remains available and can be edited if clicked on, also if i double click on it the typed words become visible and editable, however once i close the box i cannot see them on the screen.
    I would appreciate any help i can get, i cant seem to do anything using properties or view.
    Thanks 
    Tiernan

    Hi Sara,
    See response to your questions below:
    1.     Are you running into this issue in a specific PDF, or in all of them?
    A.     All of them
    2.     What version of Acrobat are you using (and, are you on Mac OS or Windows?).
    A.     Using Acrobat 10.0\Acrobat on Windows
    3.     If you look at the text properties on the Tools panel (under Format), what color is the text swatch?
    A.     Test swatch for the text is black
    4.     What happens if you change the text color?
    A.     Nothing.
    I look forward to hearing back from you.

  • Keyboard doesn't appear when trying to type into Numbers cell

    I'm having a strange problem trying to use the latest Numbers app on my iPad 2,.
    I opened a new spreadsheet but the virtual keyboard doesn't appear when I try to enter text in a cell.  I can only get the "Paste" option.  When I hit that, it enters text I'd cut and pasted from a NY Times article into a Facebook post two days ago.  I thought that I'd just paste it then delete that column later but when I move to the next column, the same "Paste" option appears.
    I can title the spreadsheet; I just can't type into the body of the spreadsheet.  The spreadsheet and cells aren't locked.
    I've been using the latest version of Numbers on my desktop with no issues at all.  I have no idea why this is happening.  Any suggestions?  Thanx.

    Hi William,
    Things are working the way the were intended to. A single tap on a cell brings up the Cut/Copy/Paste/Delete/Fill/Comment menu. A double tap brings up the input screen. If the cell is formatted as text you will get the text keyboard right away. If formatted as a date or number then those screens show. You are given the option to change the data type here. If you are in a form you will be ruled by the format and unable to change it there.
    quinn

  • Function module to read Mail Form contents with Usage Type SMS

    Hello there,
    I have created a Mail Form with Usage Type as Internet Mail (HTML). I can successfully read the Mail Form by using Function Module CRM_ERMS_MAIL_COMPOSE_NEW. This is working fine to send an email.
    I have created another Mail Form with  Usage Type as SMS. Since the usage type is a plain text, function module CRM_ERMS_MAIL_COMPOSE_NEW does not return the mail form contents. The requirement is to send the SMS with mail form contents. Appreciate if you can suggest a Function module or Class - Method to retrieve Mail form contents when usage type is SMS.
    Thanks,
    Shaun

    Hello there,
    I have created a Mail Form with Usage Type as Internet Mail (HTML). I can successfully read the Mail Form by using Function Module CRM_ERMS_MAIL_COMPOSE_NEW. This is working fine to send an email.
    I have created another Mail Form with  Usage Type as SMS. Since the usage type is a plain text, function module CRM_ERMS_MAIL_COMPOSE_NEW does not return the mail form contents. The requirement is to send the SMS with mail form contents. Appreciate if you can suggest a Function module or Class - Method to retrieve Mail form contents when usage type is SMS.
    Thanks,
    Shaun

  • When I tried to Mail Merge for Data is is not exporting any data.

    HI,
    EBS-12.1.3
    DB-11gR1
    OS - RHEL 5.6
    [With my Login User and SysAdmin Login User] When I enter into to the "People -> Enter and Maintain" Form and then I press the "Export Button", there is error Alert
    Function is not available to this responsibility. Change Responsibilities or Connect to the System Administrator
    I Added the Function "HR ADI Seeded Integrator Form Functions" into the "AE HRMS Manager" Responsiblity. It is also working and Export Data icon is enable.
    Problem:
    But Problem is when I tried to Mail Merge for Data is is not exporting any data.
    ====================================================================
    Steps
    1.Move to the "People -> Recruirment" and then "Request Recruitment Letter" .
    2. Enter the New Request. as
    Letter Name "App. Letter Contract Site",
    Automatic or Manual = Manual.
    Select the Name from the LOVs for the Request for Detail Block.
    3. Press the "Export Data" icon.
    4. Integrator Page Appear with my Custom Integrator Name as "Appointment Letter - Contact Site".
    5. Select the "Word 2003" from the View List. and Reporting is Checked.
    6. Review the Folowing Enteries as:
    Integrator Appointment Letter - Contact Site
    Viewer Word 2003
    Reporting Yes
    Layout App. Letter Contract Site
    Content XXHR_MBE_APP_LET_CONT_SITE_V
    Session Date 2011/08/02
    Mapping XXHR_MBE_APP_LET_CONT_SITE_V Mapping
    7. Press "Create Document" Button.
    8. It will open the Excel 2003 and then Word 2003. But no data down download from the Form.
    9. It open the Mail Merge Letter but no Data is Display.
    ===========================================================
    Note:
    a. I am following the Steps from the Link:"http://apps2fusion.com/at/38-ss/351-generate-recruitment-letters-web-adi".
    b. From the "Desktop Integrator Manager", "Oracle Web ADI", "HRMS Web ADI", it is working fine and Dowload the Data.
    ===========================================================
    Thanks
    Vishwa

    Please try the solution in ("Function not available to this responsibility" Error While Cliclking On Forms Personalisation [ID 1263970.1]) and see if it helps.
    Thanks,
    Hussein

Maybe you are looking for