Trying to Print Flash Screen

Hi,
I'm trying to print a particular set of objects that show in
the browser from my flash movie at a particular point in time (I
don't want to print every frame in the movie). I've created a
'print this certificate now' button with the following actionscript
applied to it:
on(release) {
print();
However, I'm not sure what to include inside the print
method. I have several different objects on the screen I'd like to
print. Anyone have any ideas?

the most satisfactory way to print from flash is to create a
printjob, access its pageWidth and pageHeigth properties and then
create a movieclip that matches those dimensions and position/add
whatever you want to include in your printed page to that
movieclip.
then add that movieclip to the printjob and start
printing.

Similar Messages

Running Safari 6.0.3 When trying to print files using Adobe Reader 11.0.02, print preview screen is all black. If files are attached to an email, receiver can't open it. It does work OK in Firefox 19.0.2 Any ideas?

Running Safari 6.0.3 When trying to print files using Adobe Reader 11.0.02, print preview screen is all black. If files are attached to an email, receiver can't open it. It does work OK in Firefox 19.0.2 Any ideas?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

TRYING TO PRINT THE OUTPUT ON SCREEN.

Hi,
I am trying to print the out put to the screen. what am i doing wrong.
CREATE OR REPLACE PROCEDURE "WRITESHIPPING"
is
p_Shipid VARCHAR2(40);
p_OrderID VARCHAR2(10);
p_ShippingMethodId NUMBER(10);
p_ShippingMethodName VARCHAR2(50);
p_ShippingAmount NUMBER(19,6);
p_GiftBoxMessage VARCHAR2(40);
CURSOR c_SHIP IS
SELECT SHIPPING_INFO.SHIPPING_INFO_ID, PRODUCT_ORDER.ORDER_ID,
SHIPPING_METHOD.SHIPPING_METHOD_ID, SHIPPING_METHOD.SHIPPING_METHOD_NAME,
SHIPPING_RATE.CHARGE, SHIPPING_INFO.SEND_AS_GIFT_FLAG
FROM FXWEB01.SHIPPING_INFO@STG, FXWEB01.PRODUCT_ORDER@STG , FXWEB01.SHIPPING_METHOD@STG ,
FXWEB01.SHIPPING_RATE@STG
WHERE ((PRODUCT_ORDER.ORDER_ID = SHIPPING_INFO.ORDER_ID) AND
(SHIPPING_METHOD.SHIPPING_METHOD_ID = SHIPPING_INFO.SHIPPING_METHOD_ID) AND
(SHIPPING_METHOD.SHIPPING_METHOD_ID = SHIPPING_RATE.SHIPPING_METHOD_ID));
BEGIN
FOR C_SHIP_REC IN C_SHIP loop
BEGIN
DBMS_OUTPUT.PUT_LINE ();
END LOOP;
END;
END;
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('no_data_found');
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('***ERROR: OTHER ERROR DURING WRITING TO THE TABLE ');
END WRITESHIPPING;
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Mnemon R ([email protected]):
I believe you have to define implicitly what you want to display on the screen. Something like this procedure:
CREATE OR REPLACE PROCEDURE "WRITESHIPPING"
is
p_Shipid VARCHAR2(40);
p_OrderID VARCHAR2(10);
p_ShippingMethodId NUMBER(10);
p_ShippingMethodName VARCHAR2(50);
p_ShippingAmount NUMBER(19,6);
p_GiftBoxMessage VARCHAR2(40);
CURSOR c_SHIP IS
SELECT SHIPPING_INFO.SHIPPING_INFO_ID, PRODUCT_ORDER.ORDER_ID,
SHIPPING_METHOD.SHIPPING_METHOD_ID, SHIPPING_METHOD.SHIPPING_METHOD_NAME,
SHIPPING_RATE.CHARGE, SHIPPING_INFO.SEND_AS_GIFT_FLAG
FROM FXWEB01.SHIPPING_INFO@STG, FXWEB01.PRODUCT_ORDER@STG ,
FXWEB01.SHIPPING_METHOD@STG ,
FXWEB01.SHIPPING_RATE@STG
WHERE ((PRODUCT_ORDER.ORDER_ID = SHIPPING_INFO.ORDER_ID) AND
(SHIPPING_METHOD.SHIPPING_METHOD_ID = SHIPPING_INFO.SHIPPING_METHOD_ID) AND
(SHIPPING_METHOD.SHIPPING_METHOD_ID = SHIPPING_RATE.SHIPPING_METHOD_ID));
BEGIN
FOR C_SHIP_REC IN C_SHIP loop
BEGIN
DBMS_OUTPUT.PUT_LINE (c_ship_rec.SHIPPING_INFO_ID| |','| |c_ship_rec.PRODUCT_ORDER.ORDER_ID| |','| |c_ship_rec.SHIPPING_METHOD_ID| |','| |c_ship_rec.SHIPPING_METHOD_NAME| |','| |c_ship_rec.CHARGE| |','| |c_ship_ rec.SEND_AS_GIFT_FLAG);
END LOOP;
END;
END;
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('no_data_found');
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('***ERROR: OTHER ERROR DURING WRITING TO THE TABLE ');
END WRITESHIPPING;<HR></BLOCKQUOTE>
null

I'm trying to print some pictures in iPhoto but a error message apears in the screen saying that there is no theme installed and I need to have some theme installed. I don't know how to do that. Need help.

I'm trying to print some pictures in iPhoto but a error message apears in the screen saying that there is no theme installed and I need to have some theme installed. I don't know how to do that. Need help.

Reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

I am trying to print redplum coupons and I can't, help. I have updated java, adobe flash, and made sure my printer was set on default. I am not sure what I am doing wrong. I have contacted redplum and no one will help.

I am trying to print redplum coupons and I can't, help. I have updated java, adobe flash, and made sure my printer was set on default. I am not sure what I am doing wrong. I have contacted redplum and no one will help.

No Apple response??? Redplum/Valassis will not help either. I searched, using the cups error message and though it is Unbuntu, same error so maybe useful...only problem: details would not display unless I join Unbuntu forum. What a pain to do anything with my Mac or find any help. I honestly regret buying this buggy OS.
Anyway, here is what I found, FYI:
http://ubuntuforums.org/showthread.php?t=483415
As the old saying goes: when in doubt, consult the manual. The problem appears to be that I added the printer using the KDE Add Printer Wizard. It was automatically given a "socket" URI instead of an "lpd" one. When I:
- altered the printer settings at http://localhost:631 (the CUPS admin page) as instructed in the manual for the printer, and
- copied the PPD file into a second place on the hard drive (as instructed on ubunutuforums, see the link above)
..everything started working.
It's still slower than windows, but I can live with that
Probably a simple fix. Change the socket I.P. to match the printer I.P. like this:
socket://192.168.1.86:9100. The thing I'm concerned with using socket:// is that AFAIK the printer I.P. must not change. In my case I'm able to assign a static I.P. address to the printer but it's something to consider.
I found that the only thing I needed to do was change socket to lpd (and remove :9100 off the end as well). See Solving Ubuntu printer broken pipe problem (DocuPrint C525A) . BTW thanks for steering me in the right direction - very grateful.
Solving Ubuntu printer “broken pipe” problem (DocuPrint C525A)
Posted on November 25, 2008
Are you having a problem with your printer under the latest versions of Ubuntu (perhaps it worked under an older version)? Are you able to print short documents, but not longer, or more graphics-intensive, documents? (e.g. the unfortunate people at http://ubuntuforums.org/showthread.php?t=625493). Do they sit there as Processing for ages and then switch to Held? If you have the same problem I had the solution I tried may work for you too. Firstly, check your cups error log:
sudo gedit /var/log/cups/error_log
If you see anything like the following, the solution may be simple:
[Job 201] Unable to write print data: Broken pipe
PID 13359 (/usr/lib/cups/backend/socket) stopped with status 1!
System > Administration > Printing and right click on your printer, selecting Properties. Settings > Device URI
If you see something like socket://your_printer_ip_address:9100 just change socket to lpd and remove the :9100 off the end. Then click on apply.
Apparently lpd is a more modern protocol which works with most printers whereas socket is more raw (and potentially faster but riskier in a network situation). Somewhere along the line, the default Ubuntu/Gnome setup for networked printers shifted from lpd to socket. Some primitive printers will have benefited whereas a larger number of more modern printers will have suffered.
Please correct me if I am wrong (which is highly possible) but the underlying problem could be that socket may make the printer wait a long time for a large file to be processed ready for printing. Some printers, such as the Fuji Xerox DocuPrint C525A, may drop the socket if things take too long to start coming through.
Changing timeout settings might work but lpd is better than socket so it is the preferred solution in any case.
If this works for you, please leave a comment to let others know (ideally with a description of the printer and Ubuntu version). Printer may be relevant if it doesn’t support the direct stream protocol properly. NB I may take a while to let your comment through because of the volume of spam. Sorry about that.
Finally, thanks to sphilli8 for the steer in the right direction at http://ubuntuforums.org/showthread.php?p=6245626.
http://ubuntuforums.org/showthread.php?t=483415

Is it not possible to print Flash embedded in PDF as you see it on screen?

Hi,
I have this problem to which I cannot find a solution. I posted my question to another mailing list but I didn't get a reaction.
It is about printing a PDF which contains Flash movies. Actually zooming is an issue too, but printing is more important.
I have attached a sample file. When opened with Adobe Reader 9.1, the first page looks OK. The charts on the
second page are wider than the page width, so that's OK too.
Zoom in; you will observe that the Flash charts will not get resized right away. To
see the effect of zooming, set the page display to "single page", page
forward/backward.
Print the file, the size of the printed Flash charts is much smaller than what is
displayed.
Am I missing something, or isn't printing PDF with embedded Flash movies 100% supported?
Thanks
Zeynep

Gavin Duff wrote:
Would like to see this fixed in a future revision
Let Apple know via
http://www.apple.com/feedback/ibooks-author.html
(I see that Pages, on which iB Author is based, also won't show the styles drawer)

Trying to print from Macbook 10.4.11 using Brother DCP-J125 printer from usb getting messagge on screen The process " Ratsterobrother 145 " terminated unexpectedly on signal 5. Why cant I print from computer?

Trying to print from Macbook OS X 10.4.11 computer to a newly purchased printer which is a Brother DCP-J125 connected through USB.
When I try to print Iget a message saying : The process " Rasterobrother 145 " terminated unexpectedly on signal 5. What does this mean? Why cant I print? What does this message mean? Is it from my computer or from my printer?
Any help or advice would be appreciated.

Trying to print from Macbook OS X 10.4.11 computer to a newly purchased printer which is a Brother DCP-J125 connected through USB.
When I try to print Iget a message saying : The process " Rasterobrother 145 " terminated unexpectedly on signal 5. What does this mean? Why cant I print? What does this message mean? Is it from my computer or from my printer?
Any help or advice would be appreciated.

I'm trying to print an Avery Saved project-(business card) and can't. I'm told that my Adobe is not

I'm trying to print an Avery saved project (business card) and can't I was told my Adobe Reader is not configured correctly. My OS is Windows 7. What do I need to do?
Chef Roberto

I have Adobe X and the latest Flash. When I hit the “print” button on my Avery project, a message comes up that a PDF file is being created followed by a Click to Open message. When I click to open the screen goes grey and stays grey.
Bob

CS3 - Error Messages When Trying To Print

Two error messages come up when trying to print with CS3.
Here are the screens hots of the error messages.
HELP!

Thank you for asking,
Windows 32 bit Vista
My reader version? This is the first I have ever had to look so the best I can say is "Adobe Reader X" .. I think.
My files are local, on a flash drive (E).
I ran chkdsk e on the drive and it all checks out as ok.
Browser is Chrome
Message was edited by: Buckawicki

Problem trying to download Flash Player

First of all I am so sorry if there was a post for this problem that I didn't see. But I am trying to install Flash player on my computer and I keep getting an error message that reads:
The instruction at "0x0e7c0068" referenced memory at "0x0e7c0068". The memory could not be written
OK to terminate
CANCEL to debug
I have tried terminating and canceling with no luck. It still gives me the same error. I can't click on the Active X control bar at the top of the screen because of this error message. I can't even check which version I have because I keep getting this same error. I manually installed Active X from a help page but I still get the error message.
Can you see my frustration. Please any help is appreciated!!! I even uninstalled all of my Adobe stuff, restarted the computer and tried downloading again. I am going insane!!! I'm not very computer savy so I really need your help.
Thanks
ttlterror

Hi thanks. You would probably already know if you have a 64bit. Go up to Help and click on About Internet Explorer, if you see x86 you are not using the 64bit.
You might try the Flash Player Installer for Internet Explorer and download it to your Desktop:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
The Uninstaller for Flash Player can also be downloaded and put it on your Desktop:
http://kb2.adobe.com/cps/141/tn_14157.html
You may want to print the Uninstaller so it is easier to follow. Also make sure you have followed the steps for Security settings, disabling any applications that use Flash. Closing all browsers, etc. Also be sure to Reboot after Uninstalling and then Reboot a second time, as this is done to be sure old Flash files are removed.
If you have any other questions, just post back.
Thanks,
eidnolb

Print to screen OR file problem, need help please.

Hiyo!, im doing a certain program the way to Uni wants me to do it so im using a textFile jar file for all the reading writing etc, i know its not standard java but thats not what im having trouble with.
Im trying to make a prog that will print its results to screen if the only augument on the command line is the file to read from eg.( java ProgramThree input.txt ).
but if two arguments are written on the command line eg.( java ProgramThree input.txt output.txt ) then it
will print the results to the file (output.txt) and not display to screen.
I know that its just that ive messed up a couple of the "args.length" statments in main() , but my brain gets confused easy :[
Any help would be sweet. Thanks.
class ProgramThree
        public static String calc(String line)
            String type[] = {"Valid Isosceles","Valid Equilateral","Valid Scalene","Invalid"};
            String result = null;
          int s1 = 0;
          int s2 = 0;
          int s3 = 0;
          try
               StringTokenizer st = new StringTokenizer(line);
               s1 = Integer.parseInt(st.nextToken());
               s2 = Integer.parseInt(st.nextToken());
               s3 = Integer.parseInt(st.nextToken());
          catch (Exception e) {e.printStackTrace();}
          if ((s1+s2>s3)&&(s1+s3>s2)&&(s2+s3>s1))
               if((s1==s2)||(s1==s3)||(s2==s3))
                    if((s1==s2)&&(s1==s3))
                         result = type[1];
                    else
                         result = type[0];
               else
                    result = type[2];
          else
               result = type[3];
          return result;
        public static void printScreen(String result)
          System.out.println("\nTriangle is: " +result+ "\n");
        public static void main(String args[])
          String line = null;
          String result = null;
                if(args.length > 2)
                  System.out.println("Too many Filenames Given!");
                  System.exit(1);
                textFile inFile = new textFile(args[0], 'r');
                textFile outFile = new textFile(args[1], 'a');
          while(!inFile.EOF())
               line = inFile.readLine();
               if(line == null)
                    break;
               result = calc(line);
               if(args.length == 0)
                    printScreen(result);
               else
                             outFile.writeLine(result);
                    System.out.println("\nResults written to file.");
          inFile.closeFile();
          outFile.closeFile();
          return;
}

Thanks for your reply neil!
But im not to sure how I would impliment your code into my program :0
The code that I posted before is throwing an arrayOutOfBounds exception at the line
inFile = new textFile(args[0], 'r');
outFile = new textFile(args[1], 'a'); <-----------Here
This happens if I enter none or one auguments on the command line :/
But if I enter two auguments it works fine and writes to file..
I know its because when there is one augument on the command line (or none at all) it opens to outFile for nothing, because its printing to screen?
The thing is i dont know how to fix this :[
-thanks

I'm trying to print multiple frames from a website onto separate pages.

Firefox has this option on OSX (each frame on separate page), but safari seems to lack such an option.
I need to print multiple frames (invoices from zencart) each on separate pages. When I try to print with Safari it will either try and print the selected frame, or it will print all the frames as it's laid out on the page (all printed on one page). Am I missing this option somewhere? Is there an extension I can try (already tried print plus to no avail)?
Thanks for all the help!

Wasn't aware of that, I'm trying to disable Full Screen completely in all Apps on my Lion.

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

When I send an email in Thunderbird it looks fine, but when the recipient tries to print it, the font is unreadablly small. Is there a setting I need to fix?

I have Thunderbird version 24.3.0 downloaded to my Windows 7 computer.
When I send an email in Thunderbird it looks fine and when the recipient receives it, it looks fine on the screen, but when she tries to print it, the font is unreadably small. This happens on every email I send her, but not other people's emails she receives. It has happened on some of the emails I receive back from her that contain the information I sent her.
Is there a setting I need to fix or something I can do on my end to address this so this doesn't happen. She is receiving email through AOL online. I believe she is viewing it through either IE or Chrome.

I recently tried sending myself an email through Thunderbird to another email account to see if that was the case, but the email came in with a font so tiny that it was unreadable. I had chosen a font type and size (arial 10) and just coming into my outlook inbox was virtually unreadable.
And referring to the person I work with, she doesn't have problems getting anyone else's emails, just ones I send from Thunderbird.

Photoshop CS4 Crashing when trying to print

Hello First time i have posted on this.
I hope i can get some help!
I have one machine with CS4 the rest have CS3
On CS4 when trying to print it comes up with the box to chose the printer, and trying to send to the colour printer it crashes photoshop
The printer is a network printer, i also set it up as a local prinjter to no avail. The CS3 user have no problems.
I have ste the colour printer to default to no avail.
I uninstalled photoshop and reinstalled this work for a couple for months now it is back to normal.
I have noticed if you chose the black and white printer in the photshop screen, then comes to the windows printing dialogbox and you chose the colour printer from there, it prints OK.
I have tried the CS4 update to no avail.
Can someone please help.

I think you may be using an older driver looking at the name of the plugin mentioned the crash report. I suggest you delete the current driver queue and then trash the Garo folder, located in HD > Library > Printers > Canon. Then you can install the following driver.
http://support-au.canon.com.au/contents/AU/EN/0100154202.html
Canon has also released an updated export plugin to support CS5. This allows better interaction between PS5 and the Garo driver and can help to eliminate the current error you are having.
http://support-au.canon.com.au/contents/AU/EN/0100182002.html

Trying to Print Flash Screen

Similar Messages

Maybe you are looking for