Trying to print off email with Epson iprint

I am experiencing difficulty printing my emails with Epson iprint. It keeps showing that it cannot find my printer.
any help i would appreciate

I, too, have just heard from an end user about problems when printing a completed form with checkboxes.  She uses Acrobat 8 standard.  I originally created the forms in Acrobat 8 Pro (have upgraded to 9 and now at X on Windows XP). 
What's troubling is she can see the form properly completed on screen, but then sometimes the "checked" checkboxes print but most of the time they do not.
I've seen references in different online sources to font issues too, possibly an old printer drive ... bottomline I need to provide an answer for her so any comments will be most appreciated.
Thank you.

Similar Messages

  • I am trying to print off some work on my advent AW10 printer by connecting it with a usb cable to my macbook pro 13" 2011. On my laptop it keeps on saying printer failed. What do i do??

    I am trying to print off some work on my advent AW10 printer by connecting it with a usb cable to my macbook pro 13" 2011. On my laptop it keeps on saying printer failed. What do i do??

    Hello molad,
    Welcome to Apple Support Communities.
    Take a look at the article linked below, it provides troubleshooting tips that can help you solve the issue printing from your MacBook Pro. 
    Troubleshooting printer issues in OS X - Apple Support
    So long,
    -Jason

  • Hi, this morning I tried to send an email with several photo attachments about 32 megs in JPEG formmat. when I sent them the wheel just went round

    Hi this morning I tried to send an email with 4 Jpegs photos about 32 meg in size.  Hit the send button and it would not send just went round and round for 30 min.  Turned off the computer and restartednow I can't access mail on the computer and when in mail mode the quit mail button is greyed out so I can't quit and restart the mail program.  My icon shows no mail on the dock yet I know I have 80  plus emails to wade through.  Using 2008 MacBook Pro with version 10.6.8. Any help would be appreciated?  Looked through the help screens with no luck.  Thanks Doug.

    Thanks Sig for your input.  Yes my ISP says about 27 meg but didn't know this, prior to sending the email.  How do I break up the email.  Two, when I do break up the email message will it stop the sent message wheel from going round & round, has been doing this now for 3 hours.  [email protected]

  • HT4641 Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

    Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

    Hi @kots 
    I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
    My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
    Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
    You may find the HP LaserJet M2727 Multifunction Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
    Best of luck.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Trying to print off CD covers/songs in the song order that it runs on the CD? It seems to print it off everything alphabetically but not in the running order of the CD. Hence it is no use. Can anyone tell me how to change this?

    Hi
    I am trying to print off a CD cover with the running order of songs as it appears on the CD.
    It prints things off ok but only alphabetical lists of songs.
    I do not know how to get the songs into the correct order and print them off.
    Does anyone know how to do this? Or does it only print off songs alphabetically?
    Hope you can help.
    Cheers!

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • How to print an email with link on a pdf output

    Hi,
    I have requirement to print an email with link like mailto: ...at...com
    I created a hyper link in my text element which created a <%W> ... </> tag. this message in this text element will be sent as a body of an email. I want to know to do the link like I mentioned above. Please let me know this is not clear.
    Thanks,
    Surya.

    Srinivas, Thanks for your quick reply.
    This is smartform, and sending the output as pdf, except the the first page on which I have the text to be printed on the email body. In this email body text I have to display an email.
    when user clicks on the email should open an outlook with the email id in the TO. Hope this helps.
    Thank you,
    Surya

  • TS1363 I tried to print off some of the iTunes advice but my computer froze. I re-booted the computer and ran the diagnostic test again but now "Secure link to itunes store failed"  AND " itunes helper not running."

    I just tried to print off some itunes advice but my computer froze.  I re-booted it and ran the ipod diagnostic test again to get back to the screen I was on. This time "Secure Link to  i tunes store failed" AND "i tunes helper not running" both appeared.   Please help, all I can see is "Appears in Windows but not iTunes" at the top of the screen.  Even though I only vaguely know what that means, I don't think that's the help I need.    

    I just tried to print off some itunes advice but my computer froze.  I re-booted it and ran the ipod diagnostic test again to get back to the screen I was on. This time "Secure Link to  i tunes store failed" AND "i tunes helper not running" both appeared.   Please help, all I can see is "Appears in Windows but not iTunes" at the top of the screen.  Even though I only vaguely know what that means, I don't think that's the help I need.    

  • Trying to print photos from iPad using iPrint to to my Photosmart c4795.

    I have been trying to print photos from iPad using iPrint to Photosmart c4795. keed getting error message "not enough memory to complete operation".

    If you power your ipad down then turn it back on that should fix the issue
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

  • HT1688 How do I print from iPhone 4 g with epson iprint

    How do I print from iPhone 4g with epson iprint

    You would have to find an app in the app store that provides this feature.

  • InDesign and printing full bleed with Epson

    I have been trying to print in full bleed from InDesign (CS6) on my Epson printer (Photo Stylus 1400). When I preview the artwork it looks fine just as I have set it up, but when I send to print the artwork is being cut off where its not supposed to. I tried to print to my wireless HP printer, in pdf, and jpg format and it still doesn't work. I also tried printing it from Photoshop and Illustrator.
    I have a Macbook Pro OS X 10.8.5 with retina display.
    If anyone has any solution to this, please let me know! Thanks

    Borderless printing is handled by your print driver, which overscales whatever you send to your printer to cover all areas. This has nothing to do with Adobe. You need to find those options in the printer driver and adjust them suitably (if that's possible)
    Mylenium

  • Print on CDs with Epson R800

    I was able to use 'Epson Print CD' to print on my cd/dvd before but since I pluged the printer in my Airport Extreme, I can't use the Epson Manual feed to print on cds. I tried to plug the printer directly in my PowerBook, delete the Manual driver, but now I can't reinstall the Manual driver.
    Is it just not compatible with OS 10.4.4?

    I sent an email to Epson and this is their reply, for those who might have the same problem. I was able to install the manual printing driver for my CDs but the manual printing doesn't work when the printer is pluged in the Airport Extreme. It has to be pluged directly to the Mac.
    Please follow the steps below to completely remove and reinstall a
    downloaded driver for your printer in OSX.4
    DEVICE REMOVAL
    1.  Open the MAC HARD DRIVE, APPLICATIONS folder, UTILITIES folder, PRINTER
    SETUP UTILITY.
    2.  Highlight any listings of the Epson drivers and select DELETE.
    3.  Close the PRINTER SETUP UTILITY.
    REMOVE FILES
    1.  Double click on the MAC HARD DRIVE.
    2.  Double click on the LIBRARY folder.
    3.  Double click on the PRINTERS folder.
    4.  Drag the EPSON folder to the trash can.
    NOTE If you receive an access denied error message, this indicates that
    you do not have root access. You will need to contact Apple for assistance
    on obtaining Root Access.
    5.  Close any open windows.
    6.  Double click on the MAC HARD DRIVE.
    7.  Double click on the LIBRARY folder.
    8.  Double click on the RECEIPTS folder.
    9.  Delete any Epson Receipts.
    10. Close all windows that are open, and restart your computer.
    NOTE: The following procedure will remove all printers that you have
    installed on your computer. If you have multiple printers on your system,
    you will need to re-add all your printers once this is complete.
    1. Make sure that your printer is turned on and connected to your computer.
    2. Open the HARD DRIVE, go into the APPLICATIONS, and select the UTILITIES
    folder.
    3. Double click on the PRINTER SETUP UTILITY. Click on the PRINTER SETUP
    UTILITY Menu option at the top of the screen and click on RESET PRINTING
    SYSTEM. Click on RESET when prompted and then enter your system password.
    This will remove all printer drivers in the list and you will have to add
    all of them again. Now download the current printer driver.
    DOWNLOAD
    Please follow the steps below to download and install your printer in OS X:
    1. Go to the website http://support.epson.com
    2. Under the PRINTERS heading select Ink Jets and then your printer model.
    3. Under the Drivers & Downloads section select Macintosh. Download the
    most current version of the Printer Driver for your Macintosh operating
    system.
    INSTALLATION
    1. After download is complete, double click the icon that appears on your
    desktop, then click CONTINUE, then CONTINUE again, then OK on the
    INSTALLATION WAS SUCCESSFUL screen.
    2. Open the new folder created by the extraction process.  It will appear
    something like  epson1XXXX (X represents variable numbers).
    3. When you open this folder, you will find a file with a .DMG extension -
    double-click it. This will create another icon on the desktop with the name
    of your printer. Double-click to open the DISK IMAGE file.
    NOTE: In most OS 10.3 systems the installer will perform this step
    automatically and you will see an INSTALLER.PKG file.
    4. Double click the INSTALLER.PKG file to start the installation process.
    5. The next menu will prompt you to ensure that you have Administrator
    Rights to install the printer driver.  Click on the lock (if necessary) and
    enter your password.
    6. The actual installation process will begin.  Click CONTINUE, then
    CONTINUE again at the SOFTWARE AGREEMENT window, then CONTINUE again, then
    AGREE.
    7. You will be prompted to select a disk to install the printer to. Select
    the appropriate Macintosh HD or OS X drive or partition and click CONTINUE.
    8. In the next window that appears, click INSTALL.
    9. You may be informed that the computer needs to be restarted after
    installation; click CONTINUE INSTALLATION here.  The driver will now be
    installed and the system optimized. Restart the computer when install is
    complete.
    Configuration
    1.  Make sure that your printer is turned on and connected to your
    computer.
    2.  Open the HARD DRIVE, go into the APPLICATIONS, and select the UTILITIES
    folder.
    3.  Double click on the PRINTER SETUP UTILITY. If your printer is listed
    correctly, close out of the windows and test your printer, as it is already
    installed.
    4.  Click the Add tab at the top of the Printer Browser window and then
    select More Printers tab at the bottom of the Printer Browser window and
    then select  Epson USB and then select your printer under Product Name and
    then select the arrow by the Standard option under the Page Setup option
    and select the All option and then select Add.
    5.  Close out of any open windows and test your printer. Please make sure
    that you select the correct printer in the page setup and print menu of the
    application.
    PowerBook 15", 1.67 GHz, 1.5 GIG RAM   Mac OS X (10.4.3)   G4 QuickSilver 733Mhz, G4 400 Mhz, G3 Desktop
    PowerBook 15", 1.67 GHz, 1.5 GIG RAM   Mac OS X (10.4.3)   G4 QuickSilver 733Mhz, G4 400 Mhz, G3 Desktop

  • Trying to print via wifi to epson stylus color 740 but can't

    Hi all,
    I am trying to set up my just purchased PowerBook g4 to print via airport wifi to an epson stylus color 740. I have been printing to this printer from my old laptop without any problems but I forgot how I set it up. It had something to do with lpt1 protocols. Is that IP address setup? I am now trying to set it up through OS X 10.5.4 and the other laptop has OS X 10.3.9. The dialog box is a little different and gives me many options for connecting. Which one do I use? The printer is hard wired to my SMC router which is connected to my g4 tower.
    I got as far as trying to print to the printer but it would say it was sending then says the printer is paused when it isn't.
    On my Titanium g4 the settings are:
    printer name: lpt1on192.168.2.1 on 192.168.2.1
    location: unknown
    queue name: lpt1on_192.168.2.1_on192.168.2.1-1@g4tower
    host name:g4tower.local
    These settings are working not only for the Titanium g4 but for 2 other IBooks in the house. I just don't know where to put the settings in Leopard.
    Thanks for any help,
    Model Name: PowerBook G4 15"
    Model Identifier: PowerBook5,2
    Processor Name: PowerPC G4 (1.1)
    Processor Speed: 1.25 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 512 KB
    Memory: 1.25 GB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.7.1f1
    Message was edited by: Claire Thomas
    Message was edited by: Claire Thomas

    Generally, there are two issues.  First, you must know which paper to select, and second you must specify a feed-method that allows the paper you want to be in the list.
    Second thing first, as it's more tricky.
    The paper selection in the "Media Type" drop-down of the Epson 3880 Print dialog (the second print dialog presented when printing from Aperture) is limited by the selection you make for "Paper Size" in the Printer section of the Aperture "Print" dialog.  To get "Fine Art" papers to show (and be selectable) in the Media Type drop-down, you must specify a Paper Size that allows those papers.  Anything marked "Manual" should suffice.
    An example will be helpful  .  I print most of my work on Epson's Hot Pressed paper, which I purchase in boxes of sheets.  If I am printing to 8 ½ x 11 inch sheets, I do the following:
    In Aperture, in the Printer section of the Print dialog, I select "US Letter (Manual - Rear)":
    (This is the key.  Selecting "US Letter" will not allow me to specify the paper I want.)
    When I click the button "Print", another Print dialog opens.  This one is specific to the printer (in this case, the Epson 3880).  In that dialog, I specify for "Media Type" on the "Basic" tab of the "Printer Settings" tab of the "Print" dialog "Hot Press Bright":
    This shows in the drop-down menu, along with other papers which must be fed manually:
    I hope that helps.  Non-Epson papers should come with instructions telling you the paper to select.  For instance, I also print to Hahnemühle Harman low-gloss papers.  These specify that I select "Ultra Premium Photo Paper Luster", which I do:
    In the above dialogs, you can see that I have created printer presets for the papers I regularly use.
    —Kirby.

  • Trying to link my email with a iPhone 5c

    I'm trying to link my Tiscali email account with my mail app on my iPhone 5c. I input all the correct details and as i press save it pops up saying 'Cannot connect using SSL' 'Do you want to try setting up the account without SSL?'
    If i press No then it goes back to the setting up account page.
    If i press Yes then it saves the account and i recieve my emails. But it wont let me send any emails it just pops up saying 'Unable to send Email' 'A copy has been placed in your outbox. The sender address '[email protected]' was rejected by the server.'
    Also a pop error message comes up on the odd occasion to. I've tried setting up this email on my iphone a few times now and ever time its failed.
    Why is this happening?
    I created the tiscali account ages ago before tiscali changed to TalkTalk. I have to go on the talktalk website to access my emails.
    Thanks for any help.

    you solved the initial problem by turning off SSL.  The second problem is that you missed some detail in the outgoing server set up.  Google "tiscali e mail set up" to get a fresh copy of the specific e mail parameters , and try again.  Pay particular attentioon to the outgoing server name, and port.  If it asks again for your name and password - do it - even if it says optional. 
    Some services are screwy enough that they have a wizard for installing on mobile devices.  I dont know if tiscaki does, but check their website.

  • Hi There, I have a problem when trying to print either Email or from a web page.

    Hi There,
    I have a problem when trying to print contents fro either Email's or from web pages, the problem started after i opened Google earth and it down loaded Google Chrome i do not like Google chrome so i removed it from my pc via add and remove programmes since then when i try to print an email i get what looks like the computer settings for writing the email and not the text same for web pages, as anyone come across this problem before i can print any word or spreadsheet documents but problem is with email's and web pages.
    Many Thanks.

    Something changed on your system, possibly when Google Chrome installed. It could  be many things, but what it boils down to, is it needs to go back to the way it was. Either by removing whatever else might still be left from the install, or maybe by reinstalling the printer itself.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Hi I just got a new macbook pro i7 processor and i am trying to send a email with  iPhoto and it comes back with The Email sever didn't recognise your username /password combination I'm with btyahoo  thats my I S P

    hi i just got a apple macbook pro on sat... it is the i7 processor 13inch.. the thing is i have been trying to send a picture with iphoto but it just comes back with the sever didn't recognise my Email/password combination

    Go to the Mac App Store main page and click on Support under Quick Links.
    (82704)

Maybe you are looking for