Trying to update LFAT-TAXGR field via CREMAS04

Hi,
I am trying to update LFAT-TAXGR on CREMAS04 but can't find the corresponding field on CREMAS04.
Question - does CREMAS04 Idoc give this feature?
Any advise will be much appreciated
Regards,
Shreedhar

I also can verify that the web service is working correctly because I can submit a change to other fields including the AuthenticationType and all the other fields will update correctly just not the AuthenticationType field.

Similar Messages

HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I recently tried to update my iphone software via itunes but got an error and my iphone has gone to recovery mode and now it doesn't connects to my itunes. i tried everything but can't connect and apple mobile device(recovery mode) driver

I recently tried to update my iphone software via itunes but got an error and my iphone has gone to recovery mode and now it doesn't connects to my itunes. i tried everything but can't connect and apple mobile device(recovery mode) driver is not installed. Where can i get apple mobile device(recovery mode) driver software? please help

http://support.apple.com/kb/TS3694#error1

Why do I get general access denied trying to update my own field in Active Directory?

I am trying to update a field pertaining to my own user object in Active Directory using ADSI and C++ app. The operating system
is Windows Server 2012 Standard.
I am able to read, I am able to call Put without problems, but when I call SetInfo, it returns with "General access denied". I have
confirmed that it's my own user object I'm trying to access.
I obtain my own FQDN like this:
GetUserNameEx(EXTENDED_NAME_FORMAT::NameFullyQualifiedDN, pszFullyQualifiedDN, &dwFullyQualifiedDN);
Then I use it like this:
LPTSTR pszObj = (LPTSTR)LocalAlloc(LPTR, dwMemToAlloc);
wcscpy_s(pszObj, dwMemToAlloc / sizeof(TCHAR), L"LDAP://");
wcscat_s(pszObj, dwMemToAlloc / sizeof(TCHAR), pszFullyQualifiedDN);
I bind to an object like this:
ADsGetObject(pszObj, IID_IADs, (LPVOID*)&pObject);
This call succeeds:
pObject->Get(CComBSTR("Description"), &var);
This call also succeeds:
VariantClear(&var);
V_BSTR(&var) = SysAllocString(L"Some new value");
V_VT(&var) = VT_BSTR;
hr = pObject->Put(CComBSTR("Description"), var);
Trying to commit the above change using the following:
pObject->SetInfo();
This is where it fails.
It returns E_ACCESSDENIED General access denied error.
As you can see, that is my own user object I am trying to update. To my understanding that is supposed to work provided I am a member of Domain
Users group. Which I am.
What could possibly be the problem?

The problem is that in Windows Server 2012 Domain Controller, permission to write to public (and personal,
for that matter) properties is not granted to "SELF". The field I am trying to write to belongs to public properties. The only property set a user is able to change for himself in Windows Server 2012, by default, seems to be "Private-Information",
which consists of ms-PKI-Credential-Roaming-Tokens,ms-PKI-RoamingTimeStamp, ms-PKI-DPAPIMasterKeys, ms-PKI-AccountCredentials
Why on earth a user doesn't have permission to write to his own personal fields in Windows Server 2012 AD, Microsoft??!?!?!

Lock when trying to update a Z-field in MARD

Hi,
I have a Z-field in an append to MARD. In MIGO we create an output idoc (a custom made Z-idoc) and in the function module processing the idoc I want to update my Z-field in MARD. The update in MARD are made with a bapi called BAPI_MATERIAL_SAVEDATA.
Pseudocoding of the function module which are processing the idoc:
Get material document into bapi structures
loop items.
   perform get_some_more stuff
   perform update_mard.
endloop.
form update_mard.
    do some stuff
    call method class=>update_mard
    loop at error messages.
         Give a message
   endloop.
    call function BAPI_TRANSACTION_COMMIT.
endform.
in the update_mard-method I fill the structures needed to handle the append in mard and call the BAPI_MATERIAL_SAVEDATA
I hope you are with me so far. From the update_mard I receive some error message handled in the loop that the material couldnt be saved. I assume I have a lock problem. But I cannot get the program to stop when I set a break-point. It simply doesnt stop.
So two questions:
1. Can I somehow force my break-points to come in effect?
2. Can I "postpone" the actual update of MARD until the material document output is processed? If so how? If not, what can I do to avoid my lock problem?
best regards,
Glenn

Hi,
I have tried to put a break-point just before my error message are created but it still don´t stop. But since I get the error message I know that the flow passes my break-point. It just doesn´t stop. Does it matter if I use break-point or break ?
I can see lock entries during the processing. I set a wait up to 30 seconds so I have plenty of time to check lock entries, and I see that there are entries.
My concern is that I want to be able to postpone my processing until the system releases the lock, but preferrably from the function module where I handle my idoc.
br,
Glenn

HT4623 I am trying to update to iOS 5 via software updates but the general tab in settings does not offer it? I'm using an iPad 2.

I am trying to update to ios5 via software updates but the general tab does not offer it. I am using an ipad2. Help!

Here you go:
iOS 4: Updating your device to iOS 5 or later
Summary: Connect your iPad to a computer running the latest version of iTunes and your update options will appear.

Problem updating a date field via UnitOfWork - TopLink 9.0.3

Hello,
we want to change an exisiting application that employs TopLink 9.0.3, Build 423.
The data is stored in an Oracle 9.2.0.6.
The specific table has a composite primary key consisting of four fields.
I can easily create a new Object (foo)
uow.registerNewObject(foo)
uow.commit()
and see the results in the database.
If I obtain an exising Object (bar) and change an integer
bar = (Bar) Session.readObject(Bar.class, expr);
cloneBar = (Bar) uow.registerObject(bar);
cloneBar.setSomething(42);
uow.commit()
everything is fine.
But if I dare to change a Date field
cloneBar.setSomethingElse(cal.getTime());
then
uow.hasChanges()
returns true
but the update does not happen. It is neither logged nor is the data changed in the database.
Is this a known bug?
What have I done wrong?
How can I avoid using hard-coded SQL to update my Bar object?
Bye,
Stephan

Hello,
it is very disturbing, but I finally found the reason for this problem.
After decompiling the Project class file (we have no source code of this third-party library), I saw that the mapping for this specific field is set to "readOnly".
I did not know that TopLink is able to have specific fields "readOnly" and others "readWrite", but it can handle this!
So it seems that the behaviour is not a bug but a feature :-(
We can change the mapping before creating the session, with the result that the field is updatable.
Have a nice day.

Trying to update apps on phone via computer

Keep getting this message:
This computer is no longer authorized for apps that are installed on the iPhone “Andrea Campisi’s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store?
When I say yes, and put in my password, it tells me...
This computer is already authorized including this one, you have authorized one computer out of your available 5. I hit ok, and it brings me back to the first message...
Can't seem to update my phone on the phone or computer...help

your itunes on the computer and your iphone are logined with 2 different appleID change it so itunes on the computer is using the same one as the phone

Trying to update a ADO recordset date/time field.....

opened recordset, read 1st records, read a field from 1st record, trying to update a date field in Oracle called "LastAccessed"
Rs->Fields->Item["LastAccessed"]->Value = btemp;
I want to feed it the system date & time.
What type do I use ???
VC++ 6.0 NT
Thanks,
jim

Hey betsyfrombakersfield!
I have an article here that can help you troubleshoot your connection to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Problem with update of BLOB field in a table with compound primary key

Hi,
I've been developing an application in Application Express 3.1.2.00.02 that includes processing of BLOB data in one of the tables (ZPRAVA). Unfortunately, I've come across a strange behaviour when I tried to update value in a BLOB field for an existing record via a DML form process. Insert of a new record including the BLOB value is OK (the binary file uploads upon submiting the form without any problems). I haven't changed the DML process in any way. The form update process used to work perfectly before I'd included the BLOB field. Since than, I keep on getting this error when trying to update the BLOB field:
ORA-20505: Error in DML: p_rowid=3, p_alt_rowid=ID, p_rowid2=CZ000001, p_alt_rowid2=PR_ID. ORA-01008: not all variables bound
Unable to process row of table ZPRAVA.
OK
Some time ago, I've already created another application where I used similar form that operated on a BLOB field without problems. The only, but maybe very important, difference between both the cases is that the first sucessfull one is based on a table with a standard one-column primary key whereas the second (problematic one) uses a table with compound (composite) two-column PK (two varchar2 fields: ID, PR_ID).
In both cases, I've followed this tutorial: [http://www.oracle.com/technology/obe/apex/apex31nf/apex31blob.htm]).
Can anybody confirm my suspicion that Automatic Row Processing (DML) can be used for updating BLOB fields within tables with only single-column primary keys?
Thanks in advance.
Zdenek

Is there a chance that the bug will be included in the next patch?No, this fix will be in the next full version, 3.2.
Scott

Updation of Custom Fields in AFRU table Using Customerexit

Hi all,
I added two fields in CO11n Tcode using SCREEN EXIT - CONFPP07 and iam trying to update these two fields in AFRU table
using CONFPP05. But iam unable to update these two field .
see this code in CONFPP05
LOOP AT afrud_tab.
    afrud_tab-zzshift = wa_afrud-zzshift1 .
    afrud_tab-zzoperator = wa_afrud-zzoperator1 .
    MODIFY afrud_tab.
ENDLOOP.
Plz help me regarding this..

Thanks for reply
Ya i added two fields in confpp07 .
see the code :
*& Include           ZXCOFTOP
tables : afrud.
DATA : WA_AFRUD TYPE AFRUD,
        IT_AFRUD TYPE TABLE OF AFRUD.
Include           ZXCOFU24
MOVE afrud-zzshift1 TO wa_afrud-zzshift1.
MOVE afrud-zzoperator1 TO wa_afrud-zzoperator1.
Even though it is not updating . except these two fields.
Regards,
Srinivas

Tried to update to newest version. I got error because i didn't have this recovery program disc that was supposed to come with the purchase but it didn't and now my ipod touch 8gb won't connect with itunes and is stuck on a connection with itunes screen

I tried to update to newest version via pc. I got error because i didn't have this recovery program disc that was supposed to come with the purchase so it says, but it didn't and now my ipod touch 8gb won't connect with itunes anymore and is stuck on a screen displaying an itunes icon with a usb icon.

oke i'm not done with the whole thing, but i'm doing that right now. Most of the advice I've already read didn't work and at a certain point it said something about shutting down programs then restart. but i notice that there are some pretty important system things in that list and i don't want to mess up my pc :s i'm not a pc genius... and because i'm dutch and my pc-language is in dutch I often have trouble translating and well... i don't always understand the technical stuff in all the articles -_-

How to update the Customer field value of PO Item under the Delivery Address Tab?

Hi Friends,
i tried to update the Customer field Using Bapi_PO_change.I passed the PO Order no,POADDRDELIVERY data with Item no,Adrees no,Customer no.But i am getting no data changed message from return table.I attached the screen shots.So please suggest me the helpful information for resoving this issue.
Thanks,
Dinesh

Thank you friends,
My Problem was resolved.In my case i have passed the customer value in BAPI_PO_CHANGE POITEM Table with updated customer value.
Thanks,
Dinesh

Problem with ojdbc14.jar (oracle10g Rel. 2 driver) in updating a BLOB field

Hello All,
Our web application uses oracle10g Release 2 jdbc driver with websphere 5.1.1.4 and oracle 9i. When it tries to update a BLOB field in the database updation is successful but it is updating that field with a null value. So rest of our application fails as this value is becoming null. We use an entity bean to update this table and websphere uses a prepared statement to update this table. Just before setting this BLOB field using setBinaryStream() on prepared statement I am printing to see whether it is null or not as shown in the code snippet below. And it is printing it correctly as non null. But after execution of the prepared statement some how the value stored in database is null.
Is this a known issue with this driver? Does any one know work around or a solution to this? We have 3 BLOB fields in that table. Is that a problem? If we separate these BLOB fields into separate tables will the problem be solved? Any input on this is very much appreciated.
// For column ORIGINAL_CONTENT
byte[] tempbyteArray;
tempbyteArray=(byte[])inputRecord.get(25);
if (tempbyteArray == null) {
System.out.println("DqPageBeanFunctionSet_f9c724af: tempbyteArray NULLLLLLL");
} else {
System.out.println("DqPageBeanFunctionSet_f9c724af: orig tempbyteArray length: " + tempbyteArray.length);
if(tempbyteArray != null) {
pstmt.setBinaryStream(25,new java.io.ByteArrayInputStream(tempbyteArray),tempbyteArray.length);
else pstmt.setNull(25,java.sql.Types.BLOB);
Thanks & Regards,
-Sunitha

I have similar problem and I solved it using ojdbc14.jar oracle9i version.
try...

Iphone 4 stuck in recovery mode after trying to update

I tried to update my iPhone 4 via iTunes to iOS4.3. and after a while, iTunes gave me a error saying that my iPhone cannot be updated because of an unknown error (10) it's now stuck on a screen showing a USB cable and the iTunes logo. I tried restoring again and now i am getting the unable to restore error 11 message and it is still stuck on the screen showing a USB cable and the iTunes logo. I've also tried uninstalling iTunes and reinstalling but nothing seems to work.
Any suggestions would be much appreciated. thanks.

No, i phoned Apple and they suggested the following:
1) Power off
2) Hold down Home button
3) Simultaenously plug into computer whie holding down Home button
4) Hit restore button in iTunes
Still does not work for me, but i think my iTunes may haven been corrupted during installation, so will try it on another computer and see if it works. I read error 10, is something to do with iTunes.

Trying to update LFAT-TAXGR field via CREMAS04

Similar Messages

Maybe you are looking for