TS1292 Yes I need help activating my card again even though its activated
my iTunes card needs to be activated
If it's activated then it shouldn't need activating again - you should be able to redeem it onto your account.
If it hasn't been activated then are you able to take the card back to the store that you bought it from so that they can activate it properly ? If not then you can try contacting iTunes Support (you will probably need to give them images of the front and back of the card and your receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
Similar Messages
-
I Need help on SIM card slot on the iPhone 6
Ok. That's nice. Perhaps if you told what exactly you need help with, maybe you'll get that help...
-
LT09 - Transfer Order User Exit is not getting trigerred though its active
Hi,
I am trying to assign the enhancement : MWMTO001
( Enhancements for end of transfer order generation )
which contains the user exit component : EXIT_SAPLL03T_001
I have created a project in CMOD and assigned the enhancement.
When I execute the TCode LT09 for transfer order, I noticed that this exit is not getting trigerred ...
I need to call a smartform whenever we save the data in the T-code LT09.
Am i using a wrong Exit ? Please help me to find out why this exit is not getting triggered though its activated ....
Thanking you in advance..
Nagasubramanyam.Hi
Thank you for reply.
According to 1st scenario prgm is activated & also activated enhancement in CMOD.
According to 2nd scenario, can u suggest how to find out the correct exit...
Actually I written a print prgm in include of EXIT_SAPLL03T_001 & designed SMARTFORM for that...
if I do process thru LT09 transaction & save that SMARTFORM should be triggered which is not happening...I put break points & tried but the exit is not triggering.
pls suggest how to find out the correct exit of LT09 .
Thanks&Regards
NagaSubramanyam. -
The genius bar sold me a LaCie 500 GB EHD today but I can't get it to work properly. Can I schedule another genius bar appt. to help me with this issue even though the EHD is not an Apple product?
Yes, if you purchased it in an Apple store, they should be able to assist you. Bring your MBP with you as well as the Drive.
Ciao. -
When I was trying to buy stuff from inside a game app, there was only credit options and no gift card option even though my itunes balance should be at $50 since i just charged from a gift card. Anyone know how i can use my credit on my account to buy stuff inside the game?
If you have a credit card entered, you need to confirm the payment information. Once you do that, the iTunes Store should then charge your credit balance for purchase until that balance is used up.
If you do not have a credit card entered at all, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...
Hi 1283ar.
Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later. -
I need help that my ipad new can't be activated
i need help that my ipad new can't be activated
it's ipad new 4G
i had inserted 3G micro sim card
trying to activate the ipad but it always message apear " couldn't connect with activation server, try again in couple of minuts "
but nothing changed -
Need help with graphics card Hp Pavillion a6530.sc will a 9800GTX or 9800GT work?
Will there be enough room for a new grapihcs card to replace the old one since it's fan has broken and I could use a new Graphics card. I know that the 9500GS is quite small but will there be enough place for a 9800GT/9800GTX if there isn't could you give me the name of a graphics card manufactured by Nvidia that is as powerful as a 9800GT/GTX, and fits in to the pc. Any help will be appreciated!
Well, you are starting out from a fairly low baseline with the integrated graphics. It will not cost much to have a substantial increase if all you want to do is run WoW without error messages. Yes, the 300w power supply is an issue and rules out any card that will require its own power (i.e. needs its own power cord like a hard drive) but there are several mid-grade cards that can run off bus power alone (i.e. just from the pci-e slot itself). Just taking a quick look at newegg.com I see the following:
GeForce 9400 under $50
Radeon HD 4650 under $50
GeForce 9500GT a little over $50
Any of these should get you where you want to be and not require a PS upgrade. The slot you have available is a PCI Express x16 slot so don't look at AGP cards; they will not work. If you want to install the card you mention you need to get a better PSU. -
I need help that my ipad mini can't be activated
Good time, tell me what to do? Friends bought and the U.S. and gave me iPad mini s/n F4*******19D. It is brand new! But when you activate constantly writing - Your Internet phone can not be activated .... In the service center refused to help me by answering: We will not be able to repair your device due to an error that occurred inventory from the seller. What do I do?: (
iPad mini 64Gb WiFi+cellular
<Edited By Host>it's ipad new 4G
i had inserted 3G micro sim card
trying to activate the ipad but it always message apear " couldn't connect with activation server, try again in couple of minuts "
but nothing changed -
I just got my iPhone 4s and everything was working great. I was buying apps and music and everything
Was grand then iTunes asked me to update my billing details and so I tried but every time I put them in it keeps saying
Card declined even thought this is the card I've been using. I contacted the bank and they said the card is ok and active
And there's money in the account so I don't no what's wrong I called into the apple store and the guy
Advised me to go here and go through iTunes support. do here we are
Please help me get this sorted as I have an iPhone and no apps.!!
Thanks mike.You can use the Tab key to select a search engine on the bottom bar and press Enter to use the search engine to do the search.
*https://support.mozilla.org/kb/Search+bar
In the current Firefox 34 release there is a new "one-off" search bar.
This search bar doesn't show the name of the search engine and a logo.
You can type one letter to make a drop-down list appear where you can see suggestions and see the used search engine and that also has bar at the bottom where you can select other search engines that are enabled via the Search tab in Options/Preferences.
You can use the Tab key to select one of the other available search engines and press the Enter key to search with the selected search engine.
Click the search engine icon and click "Change Search Settings" to open the Search tab in Options/Preferences (positioned between Tabs and Content) to select the default search engine and select which search engines to show in the search bar drop-down list that opens when you start typing search terms. -
PLease I need help. My ipad mini wont fully charge. It says 100 % charged but its still shows the lightning bolt
The plug icon will show as long as the device is connected to a power source. Yes, 100% = complete, at least where I was taught math. Your fears about destroying the battery are unfounded. You can leave the device plugged in even after it's fully charged. It will stop charging.
Best of luck. -
Hi There,
I'm setting up an application where I need to record users' voice every so often during the course of the users' interaction with the application. Recording is fine, and the quality is fine, but now my issue is understandng how Flash handles the microphone when it gets attached to a stream for publishing.
Basically, the problem is that when I "publish" my stream, the voice gets cut off (clipped) at the beginning. So, I initially thought this may have to do with buffer settings on the FMS server side, but it wasn't. Then I investigated client side stuff. For some reason, my internal mic .activityLevel property is -1 even though I have called Microphone.getMicrophone(). According to Flash's documentation, this shouldn't be the case:
activityLevel property
activityLevel:Number [read-only]
Language Version : ActionScript 3.0
Player Version : Flash Player 9
The amount of sound the microphone is detecting. Values range from 0 (no sound is detected) to 100 (very loud sound is detected). The value of this property can help you determine a good value to pass to the Microphone.setSilenceLevel() method.
If the microphone is available but is not yet being used because Microphone.getMicrophone() has not been called, this property is set to -1.
Okay, I understand that fine. So, here is my code. I am using a timer to investigate the microphone .activityLevel property every 50 milliseconds:
package
import fl.controls.Button;
import fl.controls.TextInput;
import flash.display.Sprite;
import flash.net.NetConnection;
import flash.net.NetStream;
import flash.events.NetStatusEvent;
import flash.events.MouseEvent;
import flash.events.Event;
import flash.media.Microphone;
import flash.utils.Timer;
import flash.events.TimerEvent;
public class MinRecord extends Sprite
private var nc:NetConnection;
private var ns:NetStream;
private var rtmpNow:String;
private var msg:Boolean;
private var mic:Microphone;
private var recordBtn:Button;
private var stopBtn:Button;
private var textInput:TextInput;
private var micTimer:Timer = new Timer(50, 0);
private var recTimer:Timer = new Timer(4000, 1);
private var recID:String = "userVoc";
private var recording:Boolean = true;
//Constructor
function MinRecord ()
nc=new NetConnection();
nc.addEventListener (NetStatusEvent.NET_STATUS,checkConnect);
rtmpNow="rtmp://www.fmsurl.tv/app";
nc.connect(rtmpNow);
mic = Microphone.getMicrophone();
micTimer.addEventListener(TimerEvent.TIMER, showMicData);
recTimer.addEventListener(TimerEvent.TIMER, recVoice);
recTimer.start();
private function showMicData(e:Event):void
trace( mic.name + "Level: " + mic.activityLevel);
private function recVoice(e:TimerEvent):void
ns.close();
private function addMedia():void
mic.rate = 22;
private function checkConnect (e:NetStatusEvent):void
msg=(e.info.code=="NetConnection.Connect.Success");
if (msg)
ns = new NetStream(nc);
addMedia();
startRecord();
private function startRecord():void
trace("Start recording process");
if (ns)
micTimer.start();
ns.attachAudio(mic);
ns.publish(recID,"record");
trace("Speak for file:" + recID + ".flv");
private function stopRecord ():void
ns.close ();
Here are the trace statements from my output window when I run this program. My question is why the level is at -1 at the time of publising the stream? I already called everything I needed to in order for the client machine to attach mic data to the published stream. I'm at a loss here. I want to be sure that the user's voice does not get clipped at the start.
Start recording process
Speak for voice file:userVoc.flv
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: -1
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 4
Built-in MicrophoneLevel: 6
Built-in MicrophoneLevel: 5
Built-in MicrophoneLevel: 6
Built-in MicrophoneLevel: 8
Built-in MicrophoneLevel: 9
Built-in MicrophoneLevel: 12
Built-in MicrophoneLevel: 12
Built-in MicrophoneLevel: 10
Built-in MicrophoneLevel: 9
Built-in MicrophoneLevel: 7
Built-in MicrophoneLevel: 7
Built-in MicrophoneLevel: 5
Built-in MicrophoneLevel: 2
Built-in MicrophoneLevel: 3
Built-in MicrophoneLevel: 1
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0
Built-in MicrophoneLevel: 0Okay, after more investigation, I'm still getting clipped audio recordings even when the silence level is traced as 0 instead of -1. Has anybody ever had the problem of clipped audio recordings after attaching mic data to a publishing stream? Any tips as to how I might fix this?
-
need help working this out..
"It won't pick it up even though it says it's the default..."
You checked this how? Where does it "say" it is the default? -
TS1702 i can not use my master card card anymore even though it is not empty
i have bought a master card which can be used to purchase apps on the app store, 5 days ago the billing info is rejected even though i am sure that the card is not empty, so what shall i do? callimg the bank where i bought it from, deactivate my account,.....
and if i change my apple id how can i get the apps that i spent money on ???Contact iTunes Billing Support. Here's how:
iTunes Store: Contacting billing support -
help, one of my ipad apps say waiting even though it synced already, i tried to sync again but instaid of 11 gigs, i now have 10:
Hey omaredabed,
Thanks for the question. I understand you have an app that seems to be stuck on "Waiting". The following is a past discussion that dealt with a similar issue, the answer may help you as well:
App updates won't download on my...: Apple Support Communities
https://discussions.apple.com/thread/4111336
Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
If that doesn't do it, try resetting or restoring the iPhone.
via whatheck
Thanks,
Matt M.
Maybe you are looking for
-
Xcode 6.0.1 crashes when trying to debug on device
Running Xcode on Mavericks (10.9.5) it crashes consistently when I try to debug, on either iPad Mini retina with 8.0.2 or iPhone 5 (7.1.1). It also crashes if I try to view the devices from Window -> Devices. It looks to be having issues with the thr
-
I am new to the Macbook community. I own this Macbook since 10/2012. My Macbook Pro 15 with Retina Display suddenly totally stopped responding. No display, no activity on keyboard. When I connect power supply cable, the Mac makes a noise as if it is
-
Urgent- production order error- ERTR status
Dear PP Gurus i have an urgent production issue, we have full fledged WM implemented and production order components are issued automatically when order is released via a Pick list Now the problem is that the BOM components are NOt correctly staged
-
AS2 TextInput Background Color - Issues when trying to change dynamically
Hello, I'm having issues changing a TextInput background color after the initial onLoad using AS2. On load, I have no issues setting the background color with this code: Code: onClipEvent (load) { this.background = true; this.backgroundColor
-
Why do duplicate and/or older versions of plugins/addons appear on startup?
I recently started using CCCleaner and ran an analysis of all the plugins and add-ons that are enabled for start-up on FireFox. Interestingly, many of the older versions of some add-ons and plugins appeared and are enabled. Moreover, several of the s