TS1368 I'm unable to connect to iStore thru a proxy server (port: 8080)

I connect to internet thru a proxy server (port: 8080) but I'm unable to connect to iStore or any most of the other applications. I would like to know what is the port no. thru which these apps operate? Pls help me connect...

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

I'm unable to connect to database thru cold fusion

I'm unable to connect to database thru cold fusion. it
sometiems give me an error that your uname is undefined , soemtimes
it gives ur index page not found so i created index page also but
still im unable to connect to database n update my records..plz
help me out..im a fresher in cold fusion

I am having a similar problem having CFMX 7.02 verify my SQL
Server 2005 Data Sources.
I am using the sa account for CF to access the db's. But i
get the following error:
Connection verification failed for data source: myDatabase
java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver]Error establishing socket. Connection refused: connect
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver]Error establishing socket.
Connection refused: connect
Every role in SQL Server has the sa grantor Grant enabled. I
can also login to SQL Server with the sa account w/o a hitch.
I don't know what else to do. The server information is set
to the ServerName port 1433, datasource name and database name are
the same as the database name in sql server, and the username and
password are set for the sa account.
Thanks!

Unable to connect to internet via the proxy - Proxy set up OEM 12c

Windows server 2008 64 bit
OEM 12.1
I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
But when I input my Oracle support credentials I get an error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
test successful :
https://updates.oracle.com was tested successfully using the Proxy.
Go to set oracle support credentials error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
In the emoms.log file :
2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. ).
java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )

Please check the following section in
http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
Enabling Oracle Management Service to Access My Oracle Support
Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
At minimum, the following URLs should be made available through the firewall:
aru-akam.oracle.com
ccr.oracle.com
login.oracle.com
support.oracle.com
updates.oracle.com
About the dontProxyfor Property
When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
For example, suppose the following were true:
You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
http://support.oracle.com
The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
proxyHost=proxy42.example.com
proxyHost=80
dontProxyFor=.example.com, .example.us.com
PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS.

I would like to know which apple server dictation connects to so that my proxy server will stop blocking it. Which apple server does it connect too?

I would like to know which apple server dictation connects to so that my proxy server will stop blocking it. Which apple server does it connect too?

I would presume so, but it might be worth your while to experiment and play around with different combinations to see if you can block FaceTime while keeping Game Center open. Good luck!

TS1368 I am unable to connect to the itunes store; I get the message 'Itunes could not be connected to the itunes store. An unknown error occured (-3212). Also when I plug my iphone in to the computer it doesn't ever pick it up

I am unable to connect to the itunes store; I get the message 'Itunes could not be connected to the itunes store. An unknown error occured (-3212). Also when I plug my iphone in to the computer it doesn't ever pick it up please help!!

same here no solutions

Unable to connect to istore via laptop, can anyone help?

Been to apple support prior and done everything they have asked. Not been able to connect to istore since april.
Istore tries to connect then connection just falls away, no error messages etc.

I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

I'm unable to connect to my yahoo e-mail server on my IPAD2, even though I can use safari and get to my yahoo account and mail.?

I'm unable to connect to my yahoo e-mail on my IPAD2 since I have installed the new software? I can use safari and navagiate to my yahoo e-mail and get e-mail. I'm also unable to connect to the Icloud. Does anyone know what I may be doing wrong and how to fix it.

What does it have to do in iPad forum?

I am unable to update to the new version, "proxy server refusing connection."

I am running version 3.6.3 right now and I have not been able to do any of the recent updates, because after I go through the download process and launch Firefox I receive the message "proxy server is refusing connections please try again later, and I am unable to get to the internet unless I redo the 3.6.3 setup. Anybody that has the magic answer would be great, since I have to go through this process every day when I get on my laptop...

Hi
I am having this problem and tried to follow your instructions. However, when I got to 'Advanced' I did not see a Network Tab. The closest reference I could find under my 'settings' was 'HTTP1.1 - use HTTP1.1 through Proxy connections' I have the option of 'unclicking' that box. I wasn't sure if that would solve my problem.
Thanks
Jackie

Unable to connect to a database on one server using oracle client on anothe

Hi,
I am trying to connect to a database on zodiac server (10.180.173.201), from client installed on pluto server (10.180.173.203). But its giving the below error:
bash-2.05$ sqlplus CTEMEA_MWEL3/payplus@ctftdb1
SQL*Plus: Release 11.2.0.2.0 Production on Wed Mar 28 15:57:22 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-21561: OID generation failed
I went through online help but they were not clear.
kindly suggest
-Azad

Hi,
entry is there. But when i changes the oracle home path to that of the previous client i am able to login.
But when i set the oracle home path of 11g client its giving error.
Tks,
-Azad

Unable to connect to SAP gateway to RFC server failed(hostname unknow)

Hi All,
I am trying to create a new Model(to connect to SAP R/3 server) using the following steps:
1.Selecting Import Adaptive RFC Model
2.Entering Model name,package,default logical system names
3.Selecting the single server option and giving the details of the SAP R/3 server.
When I try to connect it gives me the following error :
-Connect from SAP gateway to RFC server failed.
Also it mentions :
<b>"ERROR hostname 'sapR3' unknown "</b>
Where <b>sapR3</b> is the entry corresponding to the IP address in the host file.
Further I am able to establish a telnet session using the same hostname in command prompt.
I have searched the Internet for solutions, but I haven't found any yet.Any ideas?
Regards,
Kshitij Agrawal

Hi,
Please check if the hostname that you specify in the "Reimport Model" GUI of NWDS matches with the application server name specified in your R/3 system.The same can be verified by following three simple steps:
1) Open the SAP LogOn.
2) Choose the server to which you wanted to connect and right click on it to get the "properties" in the context menu.
3) Look for the value entered in the field "Application Server" in the properties window.
Hope this helps.

Tried to make in app purchase. Keeps telling me "unable to connect to istore"

Just wondering why? I've got money in the bank. And have purchased from the game previously several times. An apple side error perhaps?

Hey xXFlash29Xx,
There are a few different reasons why this could happen. You'll want to troubleshoot the error by following along with the help steps in this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Have a great day,
Delgadoh

Unable to connect to Essbase via EAS after server re-ip

Hi all,
One of our environments have had the servers moved to new IP addresses. The DB server was completed changed so I had to reconfigure the environment, using the same databases, and redeployed all the components. Everything worked apart from EAS. It would not launch from the URL nor would it work if the console was installed on a server or PC. I logged an SR and it was suggested to update java which I did but it made no difference. A remote session yielded nothing. I decided to uninstall EAS and reinstall it dropping the tables in the DB and having them recreated as we use calc man for Planning. The EAS console now launches but I can't connect to Essbase. It just hangs and complains of an invalid log in. I tried the native admin account but that made no difference. Here is an extract of the logs
easserver.log
[2013-11-06T15:29:02.482+00:00] [EssbaseAdminServices0] [ERROR] [ESSEAS-35505] [oracle.epm.essbase.eas] [tid: 19] [userId: <anonymous>] [ecid: 0000K8i1zGFAtH_5HRL6if1IUYLA00001b,0] [APP: EAS#11.1.2.0] Following Exception occurred for user admin. Message exception is EPMCSS-00301: Failed to authenticate user. Invalid credentials. Enter valid credentials.
EssbaseAdminServices
####<Nov 6, 2013 10:50:44 AM GMT> <Error> <Diagnostics> <THE SERVER NAME> <EssbaseAdminServices0> <[ACTIVE] ExecuteThread: '55' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1383735044140> <BEA-320127> <An error occurred while generating Image Source configuration as part of the diagnostic image zip file:
weblogic.diagnostics.image.ImageSourceCreationException: java.lang.NullPointerException
at weblogic.management.provider.internal.ConfigImageSource.createDiagnosticImage(ConfigImageSource.java:105)
at weblogic.diagnostics.image.ImageSourceWork.run(ImageSourceWork.java:111)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: java.lang.NullPointerException
at weblogic.management.provider.internal.EditAccessImpl.getEditor(EditAccessImpl.java:597)
at weblogic.management.provider.internal.ConfigImageSource.writeEditLockState(ConfigImageSource.java:296)
at weblogic.management.provider.internal.ConfigImageSource.createDiagnosticImage(ConfigImageSource.java:88)
at weblogic.diagnostics.image.ImageSourceWork.run(ImageSourceWork.java:111)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
>
EAS is installed on the same server as Planning, APS, RA etc. essbase is on a separate box as are the sql databases so in all 3 servers for this environment.
Essbase is definitely started as I can connect to it using EAS from another environment and retrieve database from the apps in excel.
Thanks in advance,
Nathan

If you are able to connect to Essbase using EAS from another Server or PC. and in that Server only if you not able to connect to Essbase using EAS
it is Java issue only. (Ensure ESSBASE.EXE process is there in Essbase Server)
Which version of Hyyperion you are using??
Uninstall Java and install again.
Thanks,
Mady

Unable to connect to system thru gui...

hi,
please help me in this error which frequently occuring connection to host xxx,service sapdp02 timed out, how to solve this and where do i look into to.
thanks in advance..
shash.......

Hi
1. Check whether the client system is connected to the server by pinging the application server.
2.,Check the entries given in SAP GUI ( App server string, Sys id, Sys no) are correct.
3. Try to login to sever thru Start -> Run -> type sapgui <servername>.
4. Try re installing SAP GUI
With regards
Karthik

Unable to connect to 11i client to 11i server through OCI calls

Hello All,
We have a C++ application which uses oci calls to connect to Oracle database. The application is built with 9i libraries. When we connect we try 11i client and 11i server combination, we are not able to connect to the db. We are able to connect to the db via sqlplus but not via our application.
The same application works fine when we use Oracle 9i client and 10gR2 server. What is the change from 9i to 11i that is causing this problem. Do I need to rebuild the product with 11i headers and libraries?
The error message in our log file is: oci.so: invalid mode for dlopen(): Invalid argument
Any help is appreciated.
O.S: Redhat Linux
DB: 11i
Thanks in advance
Radhika

Hi Radhika, I think you picked the wrong forum. See the forum called 'Call Interface' for OCI questions
Oracle Call Interface (OCI)

Unable to connect to 10gR2 client to 10gR2 server through OCI calls

Hello All,
We have a C++ application which uses oci calls to connect to Oracle database. The application is built with 9i libraries. When we connect we try 10gR2 client and 10gR2 server combination, we are not able to connect to the db. We are able to connect to the db via sqlplus but not via our application.
What is the change from 9i to 10gR2 that is causing this problem. Do I need to rebuild the product with 10gR2i headers and libraries?
The error message in our log file is: oci.so: invalid mode for dlopen(): Invalid argument
Any help is appreciated.
O.S: Redhat Linux
DB: Oracle 10.2.0.1.0
Thanks in advance
Radhika

rebuild the image with 10g

TS1368 I'm unable to connect to iStore thru a proxy server (port: 8080)

Similar Messages

Maybe you are looking for