TS1372 Hi i'm trying to restore my iPod classic and it says that the iPod could not be restored. An unknown error occurred (1434) what can i do to fix this? Thanks
Hi i'm trying to restore my iPod classic and it says that the iPod could not be restored. An unknown error occurred (1434) what can i do to fix this? Thanks
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015
Similar Messages
-
I have problem with my iphone 3gs ( ISO 5.0.1) , it is stuck on apple LOGO and just restaring from time to time after long time will open then i am able to see all app so i tried to update it to new 5.1.1 but not getting update and showing below messege the iphone could not be updated. an unknown error occurred 11
thanksif itunes can no longer pickup your ipod, and you cant even do anything to your ipod, your best option is to either call apple care, or just take it to the nearest apple shop. i had a similar problem, mines currently at apple care repairs and they might just end up giving me a replacement.
-
when attempting a restore, as suggested, to try and fix a week wifi signal on my iphone 5 I got past the point where the sopftware was extracted from my phone but then an error message appeared saying that the phone could not be restored becase of an unknown error (3014). I have tried about 20 times to make it work after trying a number of suggestions I have seen online. My phone gives me know response accept showing a picture of the cable and the itunes symble an the screen permanently - please help
Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
Mine keeps on saying that the device could not be restored, "an unknown error has occurred (2001)"!! Guess it's stuck in that dreaded "iPhone Recovery Mode" loop. The question is, which way out??? How do I get it out of the recovery loop??
A quick Google search for Error 2001 would indicate that this occurs when you have a jailbroken phone or were trying to downgrade iOS. Is that true for you?
-
I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?
The 2nd generation can not be upgraded beyond 4.2.1.
-
I was halfway updating my phone to iOs7 when it froze halfway through where it shows the apple symbol. So I turned it off and now it says that I have to connect to iTunes. So I did and it said it was in the recovery mode and should be restored. I restored it and then it come up with a message that says "iPhone cannot be restored. An unknown error occured (3194) What can i do to fix it? Please!
vTanny wrote:
..."iPhone cannot be restored. An unknown error occured (3194)
Please see the More Like This section on the right. -
I am trying to restore my phone, however it says that the iphone could not be activated because the activation server is temporarily unavailable. I have tried again a few times but still the same. Any suggestions?
Was your phone ever locked to a different phone carrier than the one your on now?
If so how was your phone unlocked?
Very rarely is the server unavailable.
Is your phone jailbroken or was your computer used to jailbreak a device? -
I’m trying to sync and back-up my iPad2. I keep getting an error message (1140) saying, “The iPad cannot be synced. An unknown error occured.” What on earth is that all about?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working. But Windows 7 recognizes the device and I can see my pictures. Same thing happens when I try to put music onto the iPad.
When in iTunes on the computer,my our ipadmshould show under devices.
Click on your ipadmunder devices then go to music at top center of the iTunes window, check what you want to sync for music. You need to set it to a folder if I remember which would have your music in it you want synced.
Same with PDF files.....there should be an option for data or even PDF files at the top center area of iTunes when the iPad is clicked under devices.
If your iPad does not show or you cannot click on it under devices which is in the leftane of iTunes, the iPad is not being seen by the computer.
Try unplugging the USB cord from the laptop then give it a few and see if the computer picks it up. -
I am trying to change my email address for an Apple ID and it is saying that it is already in use. I then sign in with that Apple ID and it says that the account is not set up yet, I don't want to set up the account, but I do want to use the email address in my original Apple ID! HELP!
Welcome to the Apple community.
Once you have created a rescue address, you cannot delete it, nor can you change it to the same address as used by your ID. There are numerous providers you can get additional email addresses from, such as Hotmail, Yahoo, Google etc etc. -
I am unable to synch my iPhone to my laptopI have tried to carry out software updates - I get a message saying that the updates could not be completed as I am not connected to the internet - despite being connected to the internet!
What OS on your Mac?
What iOS on your phone?? -
how do i delete from the startup disk? I am trying to get Mountain Lion from the App store and it says that the purchase was not complete because i need 4.06 GB space to download OS x 10.8. and to remove items from my startup disk to increase space. How?
ThanksYou can use iCloud with 10.7.5. You do not need to upgrade to Yosemite. You should provide a minimum of 15 GBs of free space or 10% of the hard drive's capacity, whichever is greater.
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located. -
message that "The iPhone could not be restored. An unknown error occurred (3194)."
How can I fix it?Usually that means the iPhone was hacked to unlock it from the original
carrier .
Updating the operating system locks it back to that original carrier
You could try this
http://support.apple.com/kb/TS3281
However if the iPhone was hacked it is probably a paper weight now
and as this is an Apple hosted forum you can get no further help here -
All of a sudden my iPhone 3GS gave me a message about setting "Location Services" I think? anyway, when it failed a few times, I was then directed to "restore" my phone. tried that and POOF!!!! could not be restored. Now have a cute little paper weight, but would like to convert it back to a phone. Any help?
Error 1 is a very bad Hardware Error of the Baseband Chip. There is no fix. If you have Warranty or AppleCare Coverage, make Genius Reservation and take iPhone to Apple for resolution.
-
Im trying to downlaod Aperature but a window pops up saying that the purchase cannot be completed because OS X 10.9 version or later is required? HELP!
What version of OSX are you using, and is this a download from the App store? Have you just bought Aperture or did you previously purchase and if so, from the App Store or from a retail / trial upgrade?
Andy
Maybe you are looking for
-
How do I stop, cancel or block my Online Number?!?...
Dear all, I checked many of the FAQ's at the Skype forum, but I can not find any answer to my question. I really hope somebody can help me out with the following: I do have an online number for one of my clients, but I need to stop or transfer this t
-
hi all, i have a very basic doubt. <form action="form_action.jsp" method="get"> First name: <input type="text" name="fname" value="Mickey" /> <br /> Last name: <input type="text" name="lname" value="Mouse" /> <br /> <input type="submit" value="Submit
-
Is there a way to find out if a particular email address (eg. [email protected]) doesn't exisit without sending an actual email message to that particular address. (through java mail api's)
-
Apportioning / splitting of Source of supply in MRP
Hi, I have a requirement in which during MRP run (in ECC 5.0) against certain materials, we need to be able to source from stock (local warehouse) whatever is available and the remaining to be procured from our vendor. I know if we set the special pr
-
[b]Adding Union in Runtime[/b]
Depending on parameters passed from the form I'd like to change my report query in runtime and add/remove union to/from the main query: If flag = 'v' then query_1 elsif flag =âtâ then query_1 Union query_2 Etc. Is it possible to implement using l