TS1372 I have an ipod classic 160gb have already tried all the steps with no success. I have just bought this ipod and have had it for less than a week before this happened. what is wrong with my ipod and how can i fix it?
brand new ipod classic 160gb will not restore. have tried all steps with no fix. Also tried steps on a different computer with same results. anu help?
if you own a mac try to re format the disc to journal.
If you are on a windows like me, try to reformat the disc to NTFS. Then it will display that you need to restore as the ipod is in recovery mode. It restored with success. and voila, brand new working ipod.
Similar Messages
-
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
My movies I bought through iTunes are in my iCloud for my iPad. They continuously keep freezing not allowing me to watch them. How can I fix this?
You might need to use a faster internet connection or stonger wifi signal, or download them to your iTunes library (see http://support.apple.com/kb/ht2519) and sync them to your iPad to watch them.
-
I have also recently installed Adobe Acrobat 6.0 Professional. Could that be the reason?
Because you had the printer connected to Windows, the print queue on your Mac was for this connection. With you moving the printer away from the Windows computer, the print queue on the Mac will no longer work and will show offline. So for the new connection of the printer you have to create a new print queue.
Now the question is; how is the printer connected to the Mac. If it is connected by USB to the Mac then it should appear in the Default Add Printer view. If it is connected to the Mac via some other method, then could you reply with how it is connected.
If it is connected to the Mac by USB then the most likely cause for the printer not appearing in the Default Add Printer view is thenUSB printer cable. So try disconnecting it and reconnecting it or even try another USB printer cable. -
Error code: Timed out
Error: Nothing done when trying to convert webpage to PDF using Acrobat X Pro 10.0.3Hi
Please update to the latest version of Acrobat 10.1.13 and then try.
Let us know if the issue still persists.
Thanks
Tanvi -
Hello!
I have had my Macbook Pro for less than 2 weeks. About an hour ago I turned it on and clicked on Safari. A pop up appeared...the usual "Congratulations! You are the Winner of.." etc etc. I have not downloaded anything from an unreliable source. I have quite honestly turned on the computer less than 10 times since getting it. The pop up prevents me from browsing the internet.
Please help! I did not think I would run into problems with the laptop so soon.
Thank you.
J.The Lion OS has a new feature that returns you to a "previous state" the next time an application is opened.
You can stop this behavior by holding down the option key when quiting an app or hold down the shift key when you launch an app. -
After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?
I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch. -
keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipodI just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.
-
I don't know what happened to my iphone but for some reason, siri is talking to me now and I have to tap everything 3 times inorder for my phone to do what I want it to do. How can I fix this problem?
Hello, Alayah14.
Thank you for visiting Apple Support Communities.
This sounds like VoiceOver has been enabled. Here are the steps on how to disable this feature.
iOS: Configuring accessibility features
http://support.apple.com/kb/HT5018
Cheers,
Jason H. -
I have tried all the steps as suggested by the community partners i.e. uninstall/reinstall itunes (number of times). If I plug my ipad 2 on my office PC which has itunes, it is recognised immediately. My lap top does not show 'NEW HARDWARE FOUND" as iPad. It just says new hardware found and shows scanner and camera hardware recognised. In my opinion there could be programme file which is having conflict with ipad 2 recognisation. I am surprised to find that APPLE has not yet come out with straightforward steps for stting up procedures to avoid this recognition issue. It is waste of time and causing lot of aggravation among iPad 2 purchasers.
Sounds like it could be your computer and not Apple. Sounds like some registry issues and/or other underlying problems.
What are your computer specs? Year? Manufacturer? RAM? Processor (type & speed, # of cores), OS (32 bit? 64 bit? Professional? Standard?) -
how can I get rid of ios6 ? I have had this iPad for less than 2 weeks and made the mistake of "upgrading" to ios6 and now my map is completely useless. Feel like I have been robbed
There are alternatives. But none of them have Google street view, able to work on iOS 6. Apple should have offered this as a beta version, for a few more months instead of inflicting us with an inferior product. This iPad will probably be my last Apple product. A shame, because until last a few days ago, I thought the iPad and iPhone were fantastic.
Apple should quit their petty squabbling with, Google and Samsung and concentrate on supplying the best product.
Google and Samsung must be enjoying this particular fiasco. -
my ipod 7th generation is not recognised by itunes and my computer. I am not able to transfer any songs. Please help me on this regard. I tried all the steps from apple website
This article should give you the options
https://discussions.apple.com/docs/DOC-3991 -
Hi. I tried all the steps above but I still cannot open any of my apps. They close instantaneously. Any one have any insight? Thanks!
This happened after I got my carrier to unlock my phone.Hi, I tried all the steps listed in these forums and they didn't work (I deleted the apps and added them back, I dled a new app, I signed in and out of my acct, I synced my phone, I did a reset holding down the power and home button, etc.). Finally I just restored the phone and added back the apps I wanted. That took care of it. Thanks.
-
I've purchased an album through the itunes store and every track plays except one which continually asks me to authorise my computer. I've tried all the steps suggested above but still no joy. Anyone have any ideas what i can do next? Thanks Paul
Sounds like you have a "damaged track" or "damaged file".
This worked for me today downloading Kendrick Lamar's new Album "good kid, m.A.A.d city".
My situation: I bought the album today for my Mac, MacBook Pro, iPad 2, and iPhone 4S devices.
Issue: One song (only on my MacBook Pro) would not play, instead display "
EX: left"
Solution: 1. Manually delete the song (giving you the error) permantly from the authorized computer.
2. Open iTunes, Click iTunes Store (left sidebar), and locate Quick Links and then click Purchased to proceed.
3. Click "Not On This Computer", find the song that wouldn't play, and re-download it again.
4. Check your Music Library for your song (Should download inside the associated album) and hit play.
EX: (Song I purchased that wouldn't play because of authorization, playing)
Enjoy! -
TS1398 My I phone will jot connect to wifi automatically I have tried all the steps here
My iPhone 5 s will not connect to wifi I have tried all the steps to rest it still does not work
I have read extensively the fixes for this and after trying them all, decided I had nothing to lose but to try the one that seemed rediculous - PUTTING IT IN THE FREEZER. I did this, then I restarted my iphone and IT WORKED. How, I do not know.
Maybe you are looking for
-
Driver issue-problem installing hardware
I installed the latest update to iTunes yesterday. Now, when I connect my IPod to my PC, I get the following error message: "There was a problem installing this hardware-apple IPOD USB driver-An Error Occurred During the Installation of this device.
-
JDOQL - isEmpty() on variable field not working?
I have a class X that has a Set of Filters. Each Filter has a Set of elements. For this example, I'll use CommodityFilter that has a Set of Commodities. Here is some example code of the example: public class X { // type: Filter private Set filters =
-
Isync and the nokia 3109 classic
Greetings, I would very much like to synchronise my nokia 3109 classis with ical adress book itunes unfortunately is does not seem to be supported by iSync. does anybody know a work around, or, when support is to be expected? I would be very happy wi
-
Dear all, My client wants to implement POD as the customer wants to be billed only on receipt of the material. We have made the necessary setting for POD. Now when we do PGI for the delivery the stock for that material is moved by 601 movement type.
-
Product Category field in basic list be edit mode.
Hi Expert, We are using SRM 5.0. In basic data we have a field Product Category which is gradeout mode(not editable). my requirement was to make it editable. please help me. Thank and reagrds, Tirumala