TS1382 my ipod got wet and allow time to dry, I turn now the musics and sound and everything but the screen is blank and nothing is visible. a solution please urgent.
my ipod got wet and allow time to dry, I turn now the musics and sound and everything but the screen is blank and nothing is visible. a solution please urgent.
See my reply to your other post
Similar Messages
-
My ipad2 (2 years old) will not turn on at all, with home key, or power on key, or both at same time. I just updated to 7.0.4 and there is a passcode, but my screen is blank and I can't turn it on.
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
My computer was rebuilt this week and I am in the process of setting up iTunes and have a weird setup issue. The music in my playlists plays but the same song doesn't play from the library. Initially, I opened ITunes while holding down Shift of control key.
Scratch the post above - the musics that plays in the playlist also plays in the library and that is because i forgot that i imported from the cd yesterday. Basically, I see the rest of my music, but it doesnt' play and tells me it can't locate the file though the location in 'perferences' points to the correct location. Getting iTunes to play after a new computer or rebuild is a headache.
-
I had a virus on my Windows Vista PC so I had to reinstall the whole system. With this I also got an upgrade to Windows 7. Now I want to use the iPod classic to put the music back on the PC. According to the explanations on Apple support you have to drag the iTunes file on the iPod to the My Music file. Unfortunately there is no iTunes file on the iPod. It does work fine though and I can listen to all the music. I have to say that before I deleted the hard drive fro the PC I forgot to switch the iPod to manual sync. It was psooible though to do that with the new installed iTunes without erasing the music on the iPod. Can anybody help? I really wouldn't like to loose the countings and playlists.
Thank you
KschonhoHi,
Not sure if this is going to any help or given your particular situation...
But thought you may like to see it anyway...
Re-create iTunes Library and Playlists
http://support.apple.com/kb/HT1451
It's a pity you don't mention having a Backup of your Hard Drive... -
Apple tv on and working but tv screen is blank and I have no ATV control
Often while using my ATV 160GB (especially when listening to music) I will turn off my TV screen. And about 50% of the time when I turn my TV back on to change what I'm listening to or do somethings else on ATV, my screen display will be blank, and I lose control of the ATV - in other words, I'm pressing buttons on the remote but I have no control over the unit - music will continue playing for example, and I can't do anything because I can't see the ATV menu on screen to navigate any ATV functions.
The only way to get the ATV display back on the TV screen is to unplug the ATV and then replug and boot it up again.
The ATV is running the latest software v3.0.1 and is connected to my stereo amp/receiver via HDMI.
Does anyone have any experience with a similar issue or ideas on a fix?Hi there....thanks for the reply post and sorry to see you are having similar issues.
This never happens if the TV is left on. I have my ATV set to show the screen saver taken from my photos and if I want the ATV menu back, pressing any button on the remote always brings the menu up. Its only when the TV has been turned off and then later is turned back on that the ATV display fails to appear on screen and I lose remote control of the ATV.
Its a good theory you put forth about this is something to do with the HDMI connection being interrupted. But I have other HDMI components connected through my receiver and I've never had this problem when switching between HDMI connected components and turning off the TV and then on again later - then I can always get that component's display on my TV screen (eg DVR or DVD player devices). Its only the ATV that fails so I have to conclude that this must be an ATV issue. -
My PB G4 is full charged and when i go to turn it on The HD spins but and the Start up sound Verifys that it came on but the is nothing on the screen untill a flash of white square like appers on the screen for about half a second. I don't Know whats wrong
It is a PB G4 with a 12" ScreenSee this Apple note on booting and video issues.
-
My iPod got wet, I put it in a bag of rice for 4 days now the Ipod Works in my music player dock, but wont connect to pc and wont work on its own.
Greetings Socs4bill,
It seems your iPod has been exposed to liquid and is not operating properly. Based on the information you have provided, it appears your iPod needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
Apple - Support - Service Answer Center
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D -
My ipod got wet and half works
my ipod got wet and still turns on but doesn't work when i plug it into my laptop
Put your iPod in a Zip-Lock bag with Silica Gel Packets. Let it sit overnight (or two) and the Silica Gel will pull the moisture from the iPod, it's internal parts, and dry it out. Simply air drying does not remove moisture from the components. You'll find Silica Gel in with all new electronics, Tvs, Phones, etc. for a reason.
Just google Silica Gel Packets and you will find a number of vendors selling! -
I was a moron and accidentally left my ipod video outside one night, and it happened to rain that night. It was then left outside half of the next day in 95 degree weather and when i found it, my ipod was too hot to touch. It won't turn on normally (pressing the middle button). However, i plugged it in to a wall charger and it did turn on and look normal. All my songs are on there still, but it won't play (i press play and it just stays at 0 seconds but says its playing). But as soon as i unplug it from the charger it turns off again. It says it is fully charged and I even left it "charging" for a night but when i unplugged my ipod it still died. please help! is it dead? can it be fixed?
iPod Video: 30GB Windows XPSame thing happened to me. I have the black 30GB model. I have mine hooked into the cigarette lighter of my wakeboard boat and my very intelligent friend sprayed the boat with the jetski. The iPod got wet, but worked for the rest of the weekend. It was not until about 4 days afterwards when it quit.
Apple says with the receipt, they can send it off to fix it under warranty. Just don't mention the water part. -
OMG. I was pushed into our new evil pool and my iPod is
COMPLETELY busted. It won't turn on, the screen is fogging up, and I have no idea what to do.
Is it covered by warranty? I was PUSHED!
HELP!!!
SyncMaster 712N Other OSahhhhh I wish I'd read this first. My water bottle leaked in my hand bag and my ipod got wet. Since I had to charge it anyway and I wanted to find out if it would still work, I plugged it in. I left it in for about 5 secondes, but then pulled it out because it was making funny noises. PLEASE is there any hope? Or have I completly ruined it?
PLEASE PLEASE let me know if there's anything I can do. I'd be devastated if it was broken for good:( I love my ipod!
Ursi -
For reasons too complicated to explain, my iPod got wet this morning at the gym. For a couple of hours afterward it was completely dark, but now it's trying to recharge a "very low battery." Assuming it doesn't recover, does anyone know what Apple charges to replace batteries? I assume I have to send it to them...
You could also try completely covering the iPod in a bowl of rice. Rice is a natural desiccant and will help absorb the excess moisture (think of rice in a salt shaker). Given how tightly the Ipod seals, you may want to give it more than 24 hours to ensure it is completely dry.
And, FYI, the issue is not necessarily the battery; you've gotten the entire circuit board wet and any attempt to turn it on or charge it risks shorting out the entire unit.
Good luck. -
my ipod got wet, when it dried out completely, i powered back up but i do not have wifi capabilities. Anyone know how to help?
What does when have to do with it? Liquide damage is not covered by the warranty.
Tomo 2 wrote:
When did you purchase it?
For the poster, try here if it is your problem.
iOS: Wi-Fi or Bluetooth settings grayed out or dim
HOwever, if you rerestored to factory defaults/new iPod and still have the problem then that points to hardware damaged caused by the water. Service is required. -
Repeat message - I have downloaded the FlashPlayer upgrade (now 10 times), in Security - no pop-ups are checked, the "allow Java" and "allow other other plug-ins" are both checked. I have re-booted after the Flash-Player upgrades - still "pop=ups blocked"
Hello,
Please provide the following information:
Your operating system & version
Your web browser(s) & version
Your Flash Player version
Explain your problem in step-by-step detail if possible
A direct link to a page that demonstrates the problem
If you get error messages, please quote them exactly, or provide a screenshot: http://forums.adobe.com/thread/1070933
Thank you.
Maria -
this morning i turned my music on and the volume wouldn't go down, and every time i tried to turn it down it just kept going back up. If i were to hold the volume slide down while playing the music it would make a sort of chopping sound in the music. I finally restarted it and it fixed it but i was wondering what the problem was.
Did you already try to reset the ipod by holding the sleep and home button until the Apple logo comes back again?
If this does not work, restore "as new device" without using the latest backup, in case it contains corrupt files.
How to back up your data and set up as a new device -
When I turn my ipod on why does the screen stay blank and then turn itself off?
When I turn my ipod on the normal start up screen appears with the apple logo in the middle, but then after a few seconds the screen goes blank and it turns itself off. It was working fine the other day. I even charged it overnight to make sure that it wasnt because it was out of battery. I dont know what to do, it has over 600 songs on it and around 300 photos, I know that the memory isnt full because I checked the other day and it said I had around 1GB left. I cant do anything on at all because the screen just goes blank and then turns itself off. Please help, thank you
Well, I strongly suspect that a gig isn't quite enough "extra" storage to allow operation.
However, first, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
Maybe you are looking for
-
Not able to drill down S_ALR_87013558 in reports
Hello Experts, I am in strange situation where in I am not able to drill down my budget report S_ALR_87013558 in my development client. But it is working fine in production client. What could be the reason.? Please suggest. Thanks, Kumar Srinivasan
-
Omni portlet - javascript - date field problem
I want to manipulate a database date type field with javascript in omniportlet layout. In the source tab of omniportlet I use the SQL: (it's very simple for example) select id, to_char(enddate, 'DD/MM/YYYY HH24:MI') edate, enddate from tlh.auctionses
-
How do I turn off the iPhone dial pad tones
I Have the dial pad tones turned off before the update now it's loud how do I turn them off
-
Artist name changes when rotating touch
I have my own MP3 library that I put on my touch. When I play a song in portrait mode it displays the artist and song name correctly but when I rotate into landscape mode the artist name is wrong (song name is still correct). I'm pretty sure this was
-
Hi Guys, Our service desk is using transaction type SLF1 where it does affect the way ChaRM works in a way. Below is my scenario: Flow to complete a change request: Service desk msg->Change doc->Correction doc. As been told, since we are using SLF1,