TS1398 not staying connected

Hi My wifi is not staying connected. It always reconnents and it goes to a web page and then says sucess and I have click done in order for it to connect. Never did this before the ios6 update

Not quite the right place - I'll let the Hosts know, and if they see fit to move it I'm sure they will.
On your machine try the following:
Open System Preferences --> Network
Show: Airport (select this option from the drop down next to 'show')
Select Airport tab on the far left.
By default, join: Preferred networks (again, select from adjacent drop down)
Ensure your network is in the list, and is at the top (drag and drop your network to the top to re-order).
If your network is not present, click the '+' sign below the box, and find your network and add it manually. If this is the only wireless network you want to use, select any others if present and click the '-' button below the box to remove them.
Good luck, let us know how you get on.
..k

Similar Messages

  • How do you resolve the problem of ipad not staying connected to internet. other laptops remain connected but ipad just disconnects after about 5 seconds.

    how do you resolve the problem of ipad not staying connected to internet when other devices are connected. Ipad disconnects after about 5 seconds.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Why is my ipad3 not staying connected to  and remembering my password to router

    After upgrading to ios 6.0.1 my ipad3 has a few problems.
    1. The internet is slow slow slow...to connect to even common websites, like Apple, Google etc.
    2. It is not staying connected to my router for wireless and is forgetting the password for
       connection to the router.
    Other computers(ipad1 and pc's) in the house do stay connected and do not have the slowness to
    connect to sites.
    I have done resets, cleared history and cookies and so on but nothing seems to make any
    difference.
    Appreciate any advice.
    Thanks
    Gary in Oregon

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
    ~~~~~~~~~~~~~~~~~
    How to Fix a Slow iPad
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-A-Slow-iPad.htm
    iPad running slow? How to speed up a slow iPad
    http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
     Cheers, Tom

  • My iphone 4s and my ipad both will not stay connected to wifi since the latest update ios.6

    my iphone will not stay connected to wifi since the ios 6.0 update

    Hello DickChris,
    The following article provides some useful troubleshooting steps and information that can help establish and stabilize Wi-Fi connections on your iPad.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Cheers,
    Allen

  • Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

    I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
    I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged. 
    I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
    The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
    If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • IPhone 4 does not stay connected to internet over 3G+

    I have an iPhone 4 on the telus network running the latest version of the os 4.3.3. My phone will not stay connected to the Internet most of the time. It looses connection and won't reconnect until I turn on airplane mode and then turn it back off. It also looses connection if I have wifi on and it detects a network but choose not to connect to it. I have restored my phone and it fixed the problem for half a day before it started again. I only have a couple months warranty left, is this covered do you think?

    I don't have another phone to try. I took out the sim to check for deffects but it looked fine. Cleaned the sim card with alcohol and cleaned the aim compartment. Phone didn't loose Internet connection all day yesterday, but this morning went to check emails and wouldn't update until I turned airplane mode on then off again.

  • Iphone 4 does not stay connected to my network

    Since upgrading to 6.1, my iPhone 4 does not stay connected to my network.  I have to input my password each time I leave my house.  My other devices stay connected, so the issue is with the upgrade.  Has anyone found a way to keep their IPhone connected to their network?  Thanks.

    I don't have another phone to try. I took out the sim to check for deffects but it looked fine. Cleaned the sim card with alcohol and cleaned the aim compartment. Phone didn't loose Internet connection all day yesterday, but this morning went to check emails and wouldn't update until I turned airplane mode on then off again.

  • Iphone does not stay connected to wi-fi.

    When using apps or when in sleep mode my iphone does not stay connected to my wi-fi. All other items within the house have no issues with staying connected to my wi-fi.

    By design, when entering sleep mode, the iPhone will disconnect from WiFi to conserve battery. If you want the WiFi connection to remain persistent, plug your phone into a power source.

  • HP Officejet 6500A Plus not staying connected to wireless network

    Just picked up a HP Officejet 6500A Plus e-All-in-One Printer - E710n the other week and set it all up and it was working wonderfully. But I noticed after it goes into sleep mode it disconnects from the wireless network and doesn't reconnect.
    I will get a overview of how I have it all set up.
    I have a DSL modem with a TRENDnet TEW-639GR router connected to it. I have set my router to reserve IP addresses for the computer and printer. That way I can leave the computer and printer wireless IP settings as automatic and they will always get the same IP address. I do this for the wireless network at my parents place as well and it works perfectly with their HP Photosmart C7280.
    I also set up the HP ePrintCenter feature on the printer so that I can print by sending the printer an email. When I first set it all up this was working great. I tested it all and it was awesome. When I would log onto the ePrint website it would show as connected and it was all good.
    So then what happened was it was all fine then the next day when we want to print something the computer says the printer is offline. I go on the HP ePrintCenter website and it says not connected. I print out a wireless network report page and it says not connected. After I printed that test page, I guess it woke up the printer enough or something as it then connected to the router and printed fine as well as showed up as connected on the ePrintCenter website. So all was good. Then the next day the printer goes to sleep and again it shows as disconnected.
    Should it not be staying connected in sleep mode? How will the printer know something is being sent to it and that it should wake up if it is not staying connected?
    Any suggestions of what I should change with the settings? I suppose I could try setting the IP settings as static on the printer itself but I shouldn't need to as I set it to static on the router. When it finally does reconnect it does always keep the same IP. If that is what is required I guess I could do that but then what is the point in having an automatic setting if it doesn't work? I would rather have this issue fixed that have to do a work around for it.
    Thanks in advance!

    Hi,
    The printer should stay connected to your wireless network after the printer enters the sleep mode.
    This is not an expected behavior.
    I believe such an issue may be caused due to a signal quality or any conflict as too many broadcust on the same channel.
    Please try the following steps in order to better understand the issue:
    Follow the Wireless Setup Wizard if your printer currently disconnected
    Enter the Setup menu.
    Enter the Network menu.
    Click Wireless.
    Click Wireless Test Report.
    What is the signal quality provided by the report and what channel used to broadcast by your router?
    If you may scan and attach the report, it may help to better understand any possible cause.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • My Macbook will not stay connected to the internet, while my Dell computer works fine. Why? What can I do?

    My sister and I both have Macbook Pros that will not stay connected to our internet (wifi). Our dell computers and HP computers in the household work great- but both of the Macs do not stay connected, and often say "you are not connected to the internet". I have saved our wifi name to the computer so it is registered as our home network- but it still will not work fast or stay connected for long periods of time. Is there a setting I need to change, or anything I can do? Very disappointed with how the Mac works with our wifi.

    Mac's will have trouble connecting to WEP Encrpyted and/or "hidden" / "invisible " networks.
    OpenWEP (insecure) or WPA2(AES) is the only secure standard.
    ..WiFi, Internet problems, possible solutions
    WiFi security issues, at home and WiFi hotspots
    Also make sure the date and time are current and updating to Apple's servers for your location in System Preferneces > Date and Time. Then reboot and reconnect.
    If your still having trouble after this, take both machines back to the store for a free evaluation.

  • HT4061 my memory is low on my ipad and i can not stay connected to the internet.  How do I fix this problem

    My ipad will not stay connected to the internet.  the message in the settings says low memory. How do I fix this problem?

    Go to Settings > General > Usage and you will see the memory consumers.  Remove some of the big stuff.

  • TS1369 I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not in itunes. At this point my ipod is connected to my computer but when it finishes syncing it's no

    I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not on itunes. The ipod is initially connected to my computer, I can see it when I look on devices in my computer. However, when it finishes syncing it is no longer detected to my computer. I cannot transfer any of my songs to my new laptop because of this. I have tried to reinstall itunes, reset my ipod and use a different port. None of these things worked. Any ideas?

    rubicon53 wrote:
    I just bought a new laptop and my ipod nano will not stay connected to my computer.
    I cannot transfer any of my songs to my new laptop
    How to use your iPod to move your music to a new computer

  • IPad 3 and iPhone 5 will not stay connected to wifi although I am close to router and have strong signal

    iPad 3 and iPhone 5 will not stay connected to wifi although I am close to router and have strong signal. I have to keep joining the network or restarting devices or forgetting network and rejoining it.  As a side note my 1st gen iPhone which I upgraded to iPhone 5 yesterday always stayed connected!

    The steps to try would be to:
    1. Restore the iPhone to Factory.
    2. If that does not solve the problem replace the iPhone.
    If Verizon is offering to replace the iPhone for free under warranty I would go with that option.

  • Mail 4.4 and Exchange 2010: not staying connected

    I am using Mail 4.4 connected to an Exchange 2010 account, and with an SMTP server instead of the actual Exchange connection to send outgoing mail due to the "no from: field" issue.
    I have noticed that Mail is not staying connected to the server. IIRC, Exchange is intended to be a live connection, and messages that arrived quite some time ago are nowhere to be seen until I click "Get Mail." Up to now, I've relied on IMAP with IDLE for mail, as I'd rather receive everything in real time instead of relying on a scheduled polling interval.
    Why is this? Is it just an issue of being Exchange 2010 instead of Exchange 2007, or is there something I can do to fix it?
    My iPhone running iOS 4.2 works perfectly with the same Exchange account.

    IMAP with IDLE for mail, as I'd rather receive everything in real time
    Certainly in the current version of Mail, you'll get more of a push effect if you use IMAP IDLE instead of EWS for communication with an Exchange server. Exchange Web Services feel less responsive.
    The Get Mail routine is much quicker with IMAP IDLE than with EWS. With EWS: the more mailboxes you have, the longer it takes.
    However: if you use IMAP instead of EWS, some features of Exchange will appear less graceful. Noticeable with e.g. messages relating to calendaring.
    (Note to self: I should review this after our organisation has completed its transition from Exchange Server 2003 to Exchange Server 2010.)
    messages that arrived quite some time ago are nowhere to be seen until I click "Get Mail."
    Using EWS: in the absence of a real-time/push effect, three approaches come to mind:
    a) pull manually (click Get Mail)
    b) prefer a schedule
    c) simply move or delete any message to trigger an update of that mailbox.
    For my Inbox, I prefer (c). An update of the Inbox alone is much faster than the (Get Mail) update of all mailboxes.
    Eventually, I guess that Apple will improve Mail to make it respond immediately to changes on the EWS side.
    Then, I'll go back to using e.g. GrowlMail to weed most messages immediately, as each one appears (much more pleasing than ploughing through a massive Inbox).

  • WRT54G v.5 will not stay connected to new laptop/Windows 7 Premium

    WRT54G v.5 will not stay connected to new laptop/Windows 7 Premium. It continuously runs through a cycle of detecting, connecting, losing connection; detecting, connecting, losing connection, etc. A the router runs through this cycle, basically acting as if I have disconnected then reconnected to power to reset it, it disrupts my Internet connection to both my wired iMac and other, wireless desktop upstairs. Paid for Linksys support today and through remote access he set up a new network on my desktop (iMac). After he finished, the problem still existed. When I told him the problem hadn't been fixed,  he told me just wait for an hour or so and it should work itself out. It, of course, did not work itself out. Any ideas out there?
    Solved!
    Go to Solution.

    Never mind-I seem to have fixed the problem with a simple firmware upgrade. Funny how the Linksys support technician didn't think to ask what version of the router I have or suggest that I should try upgrading the firmware first. He was, however, quite good at trying to upsell me to a new router instead of trying to help me fix the problem I was having. Makes me want to go buy Netgear next time, thank you very much!

Maybe you are looking for

  • Not able to update data in iterator

    Our scenario is something like this: We do not directly bind UI components to VO, that is, for example we do not directly drag and drop a VO as a table. Instead we use POJO to exchange data between the UI and model layers. Our requirement is to show

  • How to run Oracle Report in new window

    Hi, There appear to be many threads regarding this issue, but so far I've been unable to piece together a solution to my problem. My requirements are quite simple really. - Invoke an Oracle Report from an HTMLDB page - Pass parameters form the page t

  • IPad 4 128GB WiFi Battery Life

    I bought a brand new 128GB iPad 4 two days ago. I have adjusted just about every setting possible, but my battery life drains like it's use double A batteries. I left home this morning with 75% and within 3 hours (30 minutes of actual use), it was do

  • ASN Contact Info

    Dear All, Few days back I got Bronze ASN membership. Since I am new for Debug Version of applications so I am facing a lot of problem in using it. Please let me know how to caontact them. I am having only on support case and I want to use this in ver

  • How passbook works

    how passbook works? i Can´t add any of my loyal cards or gift cards