TS1398 Turn the wifi on and off? I think I have a serious problem here. I cannot even press the on and off because its not available (the color is grey not black). I think this is why Apple is constantly losing a buyer and user. Slow action.
What is the problem here Apple? Please hear us. I turned on my Wifi and then turned it off after use. After that I noticed something strange because I cannot turn on the wifi button anymore. I have restarted the phone several times, and turn it on after 10 mins, sometimes 30 min - 1 Hr. but then again its not working. I encountered this problem after updating my iOS to 6.1.2! Please hear us. If you wanted to penetrate to the market please love your consumers. Your products are great but your actions to their(US, CONSUMERS) problems in terms of bugs fixes and battery life is so slow. Why is that?
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.
Similar Messages
-
I have the IPhone 3g and when I slide my finger across it to unlock it or even turn it off it does not do anything does anyone know why.
Try resetting it: hold the on/off and home buttons at the same time until you see the Apple logo (ignore the off slider that appears first), then release and wait for it to restart.
-
when i charge my iphone it has the plug instead of the lightning bolt showing its fully charge but the percentage will stay the same or go down. when i plug it in it turns back on but turnes right back off because its at one percent and it keeps repeating the process. if i just try to turn it on it loads the aoole logo the the lock screen then turnes right back off. please help!!! i have a cdma verizion iphone 4 if that matters
Bring your phone into Apple for battery diagnostics.
-
I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
help, the last apple ID used to download in my ipad2 is stuck, I can't download anything because its not asking for my apple ID and password, how do I change it back to mine?
Again, this only affects you if someone *redownloaded* content with a different ID. In my case, I emailed iTunes Store support, explained the situation, and they reset the counter. I recommend you try the same
If you read discussion boards, this is a significant change from a year ago, when Apple told people in the same situation to go f&$# themselves. Clearly it's dawning on them that this is a stupid policy, and my guess is if people keep complaining they'll change it to something more reasonable. Remember, it wasn't that long ago you couldn't re-download content at all.
Apple can't really afford to play hardball on this. Sure, the hardcore fanboys will always say "Thank you sir, may I have another" whatever Apple throws at them, but the rest of us will just switch to Amazon, which has none of these restrictions. -
Last week I upgraded to ios 6.1 and now wifi is hardcoded 'off' I am not able to set it as on
I upgraded to ios 6.1 and now wifi is hardcoded 'off' I am not able to set it as on
Does any body have solution to above problem.......This is iCloud forum. For iPhone issue go to the Using iPhone forum
Anyway try this
IOS: Wi-Fi or Bluetooth settings greyed out or dim.
http://support.apple.com/kb/TS1559 -
My Safari is not working right. It often stalls and I get the "colored spinning wheel of Death". I send reports to Apple, but I never get any response or helpful info. What do I do to get Safari working correctly on my MacBook laptop?
From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.
Uninstall the McAfee product by following the instructions on whichever of the pages linked below is applicable:
How to install or uninstall McAfee Internet Security for Mac
How to manually remove VirusScan for Mac 8.6.x using a removal script
How to uninstall and reinstall McAfee Agent 4.x on Macintosh computers
Note that if you have already tried to uninstall the software, you may have to reinstall it in order to finish the job. If you have a different version of the product, the procedure may be different.
Back up all data before making any changes. -
hi, i bought an iphone 5 through ebay, when i am trying to activate, its asking for a icloud user name and password, but i am unable to contact the owner, but its not black listed. is there any solution? please help me.
Hello there, Ark.
It sounds like the iPhone has Activation Lock still activated. The following Knowledge Base article provides the methods available for removing the previous owner's account:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have macbook pro 15", 2,6 ghz, 8gb, osx 10.9 but the pop up window says that maverics can not be installed on this computer. why is that? thank you
Check here > OS X Mavericks: System Requirements
-
what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network
My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router. -
hey! i have a serious problem coming up which is that i am asked to enter my billing info even for free apps. why should i pay for apps which are free? please help me with this problem! and in the billing info there is pop-up box saying i have accessed my account from didfferent computer but no i have been doing it from the same pc. please help me out.
Tap Settings > General > International. Make sure the Region Format is correct.
As for your Apple ID. Tap Settings > Store > Apple ID > iForgot
Resetting your Apple ID may help.
Congrats on your new iPad !!! -
Hi apple *sigh* i have a serious problem with my imessage... when i try to open it, it automaticlly sends me back to my homescreen... hope someone knows this problem, thanks
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
My headphone jack is a little screwy i have to hold or put my headphones a certain way for me to hear what ever i am listening to. How do i fix this? if apple fixes this how much will it be?
Hello mr_sillypants,
Thanks for using Apple Support Communities.
Please follow the steps below to troubleshoot this issue:
No sound through stereo headset
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Take care,
Alex H. -
Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why I need to deactivate the space service and take my money back .. Thanks
The "issues" you've raised are nothing to do with the iCloud service.
No service that uploads data allows you to disconnect the device you are uploading from while uploading data. Doing so would prevent the upload from completing. It is a basic requirement for any uploading service that you remain connected to it for uploading to be possible.
The time it takes to upload data to iCloud is entirely dependent on how fast your Internet connection is, and how much data you are uploading. Both of these things are completely out of Apple's control. Whichever upload service you use will be affected by the speed of your Internet connection. -
hello im trying to unlock my ipod and its not letting me do this its saying that i have to connect to itunes and i did that so is there anyway you could help me please?
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
Please Get the iPod Touch User Manual for iOS 5
Maybe you are looking for
-
How do I add my new Mac to FF Sync when i dont have my old PC anymore to get a sync password?
My PC that had originally had Firefox Sync on it and was up to date is no longer with me and I don't have the ability to get on to it as its been wiped. I bought my new IMac and tried to add the IMac to the FF sync account I have set p prior on the F
-
How can I add footnotes to a text in a table?
To make use of a wider margin next to longer texts I usually work with two column tables in WORD. No problem to add footnotes to a text there. How can I add footnotes to text in a table when using PAGES? Or -alternatively - how can I write an ordinar
-
I know, another external monitor question...
Can someone please point me to a link or suggest some keywords to find a solution for adding an external video monitor? Apparently I'm not using the right ones. FCP manual says to use a "3rd party video interface". I would like to monitor my video on
-
Security implication of 'Allow Public File Upload' to Yes
Hi I am concerned about setting 'Allow Public File Upload' to Yes. Per the help text "Select Yes to permit unauthenticated users to upload files in applications that provide file upload controls. Select No to prevent unauthenticated users from upload
-
Eclipse Plugin for debugging apps on the WebSphere Application Server 5.0
Does anyone know about an Eclipse plugin for the debugging of the applications deployed on the WebSphere Application Server 5.0 like JBOSS-IDE for jboss??? Any info would be highly appreciated. Thanks