TS1425 Click wheel is totally unresponsive even after restarting & flipping the hold switch on & off

Click wheel totally responsive no matter what I try...any suggestions?

You can work through the remaining five 5 R's of troubleshooting.
http://www.apple.com/support/ipod/five_rs/
It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's clickwheel, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damage part for a little less. Google "iPod repair" and you should get a number of results to work with.
B-rock

Similar Messages

Unresponsive system but mouse still moves; even after restart

I was transferring a few files over my LAN wirelessly via file sharing to another macbook (B) when that macbook was closed and caused a disconnect. My macbook (A) has experienced issues since this disconnect. Even after restarts and resetting the pram, my system is unresponsive. The mouse will move but I cannot open applications, folders, files, or even the menu. It is as if my mouse is moving over top a picture of the desktop. I did manage to click and highlight my HD icon once but as soon as I did, the color wheel showed up and never stopped. My hard drive has over 10GB of space free. I was able to do a target disk boot and test the drive and its ok according to disk utility. Any ideas about what I could do would be greatly appreciated...preferably without wiping the hard drive.

The first issue occurred while I was transferring large files from one computer to another via afp file sharing over my wireless network. In the middle of this transfer, someone closed the receiving macbook. The macbook sending the files didn't respond well after this. It would intermittently freeze without a linked resource draining process. I believe the first occurrence was when I tried to right click a file that had been interrupted during transfer. I forced a restart, used the killall Finder command in terminal thinking that it might still be trying to transfer the file to a ghost in some way...even though that didn't make sense. I was able to verify and repair the external drive the file was on. After doing this and resetting the PRAM, it was back to normal for a little while. After a bit of normal activity (nothing strenuous), it began to freeze again. I tried the same steps and also booted in target disk mode so I could use the other macbook to run diagnostics. The drive got repaired. I attempted to restart the affected macbook but I couldn't do anymore than one thing and the never-ending colorwheel would appear. That one thing could be a single click on a file or an attempt of opening an application. After that I turned to this discussion forum after already impatiently attempting to safe mode boot and repair disk permissions. I tried this again with patience after your suggestion. It worked for a few hours and I was able to surf the web once more and go about the usual. I pulled up dashboard and pressed command+ to bring up the list of widgets and it froze on me again. I attempted previous steps again after restarting but there has been no difference in response. Throughout the entirety of this experience, there have been no error messages. Also, there's no difference in behavior if I disconnect everything but the power cable.
Sorry for the lengthy post but hopefully it will be helpful.
Message was edited by: AG_Jazz

I just test drove a Lexus ES with the Entune system, and it not only didn't play the music I expected, it caused the iPod to become totally unresponsive, even my computer doesn't recognize it? Is there a fix for this?

I just test drove a Lexus ES with the Entune system, and it not only didn't play the music I expected, it caused the iPod to become totally unresponsive, even my computer doesn't recognize it? Is there a fix for this?

This problem sort of solved itself. The iPod kept running until the battery went dead, and when I plugged it in to power this morning, it behaved normallyh.

Hi, download of the trial product (photoshop ele 13) does nt start even after successfully installing the Adobe download assistant successfully. Only .7z file is shown, .exe is nt available. Whn i try to extract .7z file wd 7-Zip error pops up " cannot ex

Hi, download of the trial product (photoshop ele 13) does nt start even after successfully installing the Adobe download assistant successfully. Only .7z file is shown, .exe file is nt visible. Whn i try to extract .7z file wd 7-Zip error pops up " cannot extract **.7z as archive" .I've tried fresh download of adobe photoshop ele 13 but same error occurs.
OS:Windows 8.1
Storage loc for adobe down assistant : C-Program file(x86)-Adobe download assistant-adobe
Storage loc for adobe down assistant: C- Adobe photoshop assistant 13- PhotoshopElements_13_LS25_win64_1. 7z
After this I try to extract ** .7z file but following error occurs :
After this I try to extract ** .7z file but following error occurs
Kindly Help.

Thanks fr revert !
After clicking on the provided link , Above error pops up. I clicked "ok" n allowed download to complete after which same previous error shows up!

Why does Visual STudio 2012 References keep showing Exclamation mark (which means assembly is missing) even after I specify the exact path?

Our web application at work requires Visual Studio 2012
For one of the projects within the Visual Studio 2012 Web Application Solution, we need the System.Web.Mvc in the References.
I already have the following in the packages folder:
{blah...blah..Visual Studio Solution path..blah}\packages\Microsoft.AspNet.Mvc.5.1.1\lib\net45\System.Web.Mvc.dll
I keep adding it, but the References still shows the Exclamation mark ( which means missing) next to the System.Web.Mvc
Why does it keep showing the Exclamation mark ( which means missing) , even after I specify the exact path to the System.Web.Mvc.dll ?

Hi cslewis33,
Thank you for posting in MSDN forum.
Based on your issue, if you want to add the System.Web.Mvc reference for a web application in VS2012. As far as l know that the System.Web.Mvc dll is default be located like this path:" C:\Program Files (x86)\Microsoft ASP.NET\ASP.NET MVC 4\Assemblies\System.Web.Mvc.dll.
So if you create the web app using c# language, I suggest you can right-click your Reference under the we application -> Add Reference->select the System.Web.Mvc in the Assemblies tab.
If the above suggestion still could not help you, I suggest you can consult this issue directly to the ASP.NET forum:http://forums.asp.net/ , maybe you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space.

I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space. What is the problem. I am not getting to know. Even after i reinstalled these apps it is still getting stuck and it is very very slow. Is this what i get after paying so much money for ipod. Is this what i get very poor perfomance.

Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
Next
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Why won't my line spacing change even after I change the # in the leading panel

why won't my line spacing change even after I change the # in the leading pane

Is this for text you've already typed? Did you select it first? If that's not it, for PSE 11 and 12 go to the far right of the tool options, click the four-lined square and choose Reset Tool. For PSE 10 and earlier go to the far left options bar, click the tiny triangle (or the tool icon for really old versions) and choose Reset Tool.

When the Mavericks download was complete (about 45 minutes), nothing happened, even after restarting. Still running 10.8.5

When the Mavericks download was complete (about 45 minutes), nothing happened, even after restarting. Still running 10.8.5

Look in your Applications folder. Is there a Mac OS X Mavericks installer in the folder? If there is then select it. Press COMMAND-I to open the Get Info window. See if the size of the file is around 5.3 GBs. If it is then try double-clicking on it to run it. If you cannot run it, then you have an incomplete download. Try it again. It's a very large file, and unless you have a really fast pipe it can take longer than 45 minutes to download.

Why won't this song play even after I authorized the computer? It says that I need to authorize the computer, then I enter my username and password and it says the computer is already authorized. But then the song still won't play. What do I do?

Why won't this song play even after I authorized the computer? It says that I need to authorize the computer, then I enter my username and password and it says the computer is already authorized. But then the song still won't play. What do I do?

Use the Apple ID support -> http://www.apple.com/support/appleid/ - click through the contact information and select the iTunes, etc., hot button. You can have Apple call you or email them.
Clinton

Kernel panic keeps happening even after I did the factory reset. any suggestions ?

kernel panic keeps happening even after I did the factory reset. any suggestions ?

Hi Hallry,
Let's free your device! It's important to have a properly working device. Have you attempted an alternate Hard Reset on the device http://vz.to/19r2DOO? If the alternate Hard Reset does not work, then the device would need to be replaced. How long have you had this device? Any liquid or physical damage to the device? Keep me posted
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

Im trying to download the new itunes so i can use my iphone 5 , however , the new itunes requires Mac OS X 10.6.8 or later and i cant seem to install that onto my imac even after searching for the new update (my imac is currently on 10.5.8.

.Im trying to download the new itunes so i can use my iphone 5 , however , the new itunes requires Mac OS X 10.6.8 or later and i cant seem to install that onto my imac even after searching for the new update (my imac is currently on 10.5.8.

You have already seen that you cannot load the new iTunes into your 10.5.8, so as Neil says, you need Snow Leopard (current cost £14). And you'll probably need to update the disc you buy via the combo update, though that is free.
As far as the new iTunes is concerned, there's been a certain amount of grumbling so you may want to study the forums before you update. The main problem has been with album artwork which does not transfer easily.

I forget to charge my MacBook Pro and it turns off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. Sometimes pulling the Battery out fixes it

I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8

I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8

Hi When i create the downpayment process in the invoice i get amount as value but my requirement is in percentage even after i select the percentage basis milestone billing please help what can be done

Hi When i create the downpayment process in the invoice i get amount as value but my requirement is in percentage even after i select the percentage basis milestone billing please help what can be done

downpayment percentage , so if i want 50 percent of order value to be paid and when i go to faz type the invoice is created for 0 value that 50 percent of the amount is not getting calculated , where as when i enter in order same as 50 percent in amount it gets calculated in invoice, any help ?

HT2978 my iphone went black and it will not come back even after i held the two bottons for over a min

my iphone went black and it will not come back on even after i held the botons down for a min

Hey dodie67,
Thanks for the question. Sounds like your iPhone stopped responding to buttons, switches, or touchscreen input, so you'd want to go through the troubleshooting steps in the following article and see if that resolves the issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Take care,
David

TS1425 Click wheel is totally unresponsive even after restarting & flipping the hold switch on & off

Similar Messages

Maybe you are looking for