TS1501 My mac mini doesn't show my iPhone 4 as device when trying to import photos

I'm unable to select my iPhone 4 as a device for importing photos on to my mac mini.

chiarafromtv wrote:
You mean like the information on Itunes? That's 11.1 (126) 164 bit..
Yes. Thank you.
chiarafromtv wrote:
. the Mac has USB3, the IPhone, that's a 4, has the USB2.. could it be the problem?
No. USB 3 is Backwards compatible with USB 2 and even USB 1...
chiarafromtv wrote:
When I connect my IPhone 4, now updated to IOS 7, it doesn't recognize it, it doen't charge it and the vibration goes like crazy!
More than likely an issue with your phone.
Perhaps a Visit to an Apple Store or  AASP (Authorized Apple Service Provider) is required.
The fact that the vibration goes like crazy  is suggestive of an issue.

Similar Messages

  • After upgrading to MAC OS X 10.10.2 Lightroom 5 has an error that it cannot read the card when trying to import photos.  The card is fine as I can import into iPhoto so any ideas?

    After upgrading to MAC OS X 10.10.2 Lightroom 5 cannot read the card (RAW files , converting to DNG) when importing.  The card is fine as I can import into iPhoto - any ideas?

    It’s usually necessary to trash the prefs after updating OSX to Yosemite. Start by quitting Lightroom 5.
    Launch Finder and click the Go menu whilst holding down the Option (alt) key. Then go to:
    Library >> Preferences
    clear everything relating to LR5 which usually means deleting the following files:
    com.adobe.Lightroom5.plist
    com.adobe.Lightroom5LSSharedFileList.plist
    Then re-launch Lightroom.

  • No desktop image shows up for my hard drive when trying to import from desktop

    I saved some jpegs to my desktop and when I went to import them into my event when selecting Macintosh HD as source the desktop does not show up?  This was never the case before and I am the only user and no settings were changed by me.

    Russ, that was actually it and I found out after realizing I still had an active Apple care plan.  The service rep discovered it in a forum such as this.  Spread the word.  If you're having import issues with FCPX check to see if there's an iTunes update and download it.  This was my first time using this forum and you're excellent response and correct solution is impressive.  I'll visit here again next time I have an issue.
    Thanks for the answer even if I had it by the time I returned to see if there was a reply.  You certainly nailed it.
    cheers,
    drew

  • Mac mini doesn't boot

    Hi,
    My 2009 Mac mini doesn't boot anymore : all I get is a blank screen, I can't even chose to boot on the restoration drive.
    From your experience, what do you think it could be linked with ? motherboard ? RAM ? It doesn't looke like a hard drive issue.
    Thanks
    Benoît

    Hello! I'm having, what sounds like, the same issue.  Everything was working fine, until I ran a combined update, as prompted, for 10.8.2.  After the normal reboot, the computer boots to a plain, white screen with no Apple.  The computer is not responding to any keyboard command at startup, be it any of the reset commands, 'C' to boot to the optical drive, or option to select the startup destination.  When pressing the Caps/Num lock keys, I notice that none of the LED lights will turn on on the keyboard.  The piggybacked optical mouse is not showing it's red light from the bottom either.  These tested fine on my MacBook Pro, however, and have always worked with the Mac Mini.  Connecting and reconnecting the devices does not help.  I know how to run all of the hard disk repairs, the permission fixes, etc., but it appears as though something is stopping my USB devices from being utilized (or even powered) at startup.  I work in IT, and I support Apple computers every day (point being, I do know my stuff).
    I opened the case and disconnected the hard drive from the logic board, thinking a potential hard disk issue is to blame.  Upon restart, I still get the BONG (chime), but the machine will still not respond to any keyboard commands.  Plugging in a USB stick that was created as a Mountain Lion boot device in Disk Utility with the InstallESD.dmg doesn't yield any results (as I am unable to 'tell' the computer to boot from it).  The system disc that was packaged with the Mini is in the optical drive, but the Mini won't boot to that either.  I'm at a complete loss.  This is a 2010 model which was purchased new in December in that year.  I'm using HDMI directly to an HDTV.  The cable is working, the TV is working, the optical drive works in another machine, and the hard disc makes the necessary sounds (but not anything out of the ordinary).
    To reiterate, this happened IMMEDIATELY after installing the combined 10.8.2 update.  I am seeing a lot of posts about this issue, but no actual solutions.  The dialogue seems to die somewhere after, "Reset the PRAM."
    PLEASE ADVISE

  • My new mac mini doesn't have upper dock?

    My new mac mini doesn't have upper dock?

    You appear to be confusing Macs and iOS devices. The Mac mini does not run on iOS 4, if new, it has Mac OS X 10.6.x Snow Leopard.
    You should sort out the profile that you show so we know what devices you have with which proper OS and then be much more explicit about what the problem is.

  • My Mac Mini doesn't start up when usb devices are plugged in.

    My Mac Mini doesn't start up when usb devices are plugged in.
    It just shows the "White screen of Death" when 1 or more usb ports are used.

    Haha. I just restarted it and it worked. Instead of turning it off and on. But thanks.
    By the way:
    Note: It is possible that the SMC could encounter an issue that may cause unusual system behavior typically related to the symptoms described below. In some cases, resetting the SMC may be the only correct method to resolve the issue, however, an SMC reset should only be attempted after all other standard troubleshooting has been performed.
    So I hope it is fixed for now. But could someone also post another solution?

  • My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help?

    My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help? Also...It doesn't recognize the digital copy DVD.

    I have ALL the exact same symptoms as on my home computer.
    It sure sounds to me like something on the iPod is broken. If it's under warranty then I would send it back for repair. If not, check out some of the web repair services, such as iPodResQ etc.

  • Mac mini doesn't recognize my wifi network

    MY new Mac Mini won't show my wifi network on the list but recognises all of my neighbors' networks. The router is right next to it. Once it connected and worked normally but as soon as I switched off the computer and turned it back on the next day, it would recognize the network again. Help!

    Power off  and then back on your router.
    Reset the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    If purchased with the last 90 ays call Apple since yo have free 90 day telephone support
    Complimentary Support (USA)

  • ITunes on new Mac Mini does not show shared libraries on network or songs on NAS drive

    iTunes on new Mac Mini does not show shared libraries on network or songs on NAS drive
    The latest version of iTunes on a 3-month old Mac Mini (8 gig RAM, OS 10.10.2) does not see any of the shared iTunes libraries on a  MacBookPro (MBP) (OS 10.9.5) and a 14-month old Mac Mini (OS 10.9.5). And a network shared drive/media server does not appear as well. I have a Gigabite Ethernet G4 and on it, the MPB and the "old" mini I can see the various shared music libraries and NAS, but not on the new Mini.
    The little house with a music note inside it that I see on the upper left corner of the iTunes 12.1 window on my MBP does not appear on iTunes 12.1 on the new Mac Mini. I have gone through all the iTunes preferences and can not find where I can turn on this feature. The new Mac Mini is on the local network and I can reach the internet successfully.
    I have been using iTunes since its beginning (still have a PowerTower Pro with a working copy of SoundJam), so I am not a newbie, but this has me baffled.

    May I add, that I gave full rights to the user at the Mac Mini to access and change data on the server drive for ITunes Media.

  • TS2057 mac mini doesn't see dvd

    Recently my mac mini doesn't see dvd's when i put them in to play.

    I have to agree with Dah●veed and use an > LG GE24LU20 Reviews that I call Brutus.
    Not only has Brutus spared the SuperDrives in both my 2006 iMac and 2010 Mac Mini, but he runs circles around the SuperDrives when it come to burning, importing, playing, even booting from System Install and Upgrade Disc's.
    Other External DVD Drives that are highly reccommended here in the forums, are:
    OWC's > SuperDrive DVD, DVD Dual-Layer, CD-R/RW, Blu-Ray Optical Drive Solutions FireWire, USB2, eSATA
    and the LaCie's > LaCie - LightScribe DVD±RW, Duplicators and Blu-ray - USB 2.0 & FireWire

  • Mac mini doesn't do anything after startup

    My early 2009 Mac mini doesn't allow me to do anything after booting. Once the desktop loads, anything I do causes a spinning beach ball to appear.
    Important info: Hard drive has over 30Gb of free space, so that isn't an issue.
    Help please!

    To be honest, I think it's over 60Gb of free space. The hard drive is either 320Gb or 360Gb.
    I can't check
    EDIT: I'm completely wrong, it has 112GB left of 320
    Message was edited by: Ert00044

  • When i plug my SD card in my MAC it doesn't show my videos, only pictures. How can i make them show up?

    When i plug my SD card in my MAC it doesn't show my videos, only pictures. How can i make them show up?

    The following may help:
    Windows: http://support.apple.com/kb/TS1538
    Mac: http://support.apple.com/kb/TS1591

  • When i start my mac mini 2007 it shows a blinking world on the screen. what is that??

    hi all the problem is that when i start my intel mac mini 2007, it takes forever to start up and when it does it has a picture of the world blinking on the screen for like 2 minutes and then it shows the apple and then it loads into the sign in screen..... my question is what is the world thing and why is it taking so long for my mac to start up it didn't do this a week ago..... what is going on....someone help me out???

    Google is your friend.
    https://discussions.apple.com/thread/1124164?start=0&tstart=0

  • How do i burn to a song to a CD when my mac mini doesn't have a CD slot. qmedjohn

    How do I burn a song to a CD when my mac mini doesn't have a CD slot. qmedjohn

    Use an external optical drive such as Apple’s USB SuperDrive.
    (125654)

  • Why does my mac mini's mouse show a pinwheel every time I hover over the date area? Also, sometimes the date shows up incorrectly.

    Why does my mac mini's mouse show a pinwheel every time I hover over the date area? Also, sometimes the date/time shows up incorrectly. It started happening after I updated to OS X Mountain Lion.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Maybe you are looking for

  • INT function in VB6

    Hello, I am not sure that  this is the correct place to put VB6 question or not, If not please suggest me correct one. My Question: Can any one explain me how INT function works internally for double type data in below case? Eg.  Dim dblVal as Double

  • File manager in e51 cannot show occupied phone mem...

    Out of 130 mb of internal phone memory device shows 65 mb free memory.other applications like default file manager or x-plore also not able to show occupied phone memory.as long as I do not know which part has occupied this huge memory I cannot delet

  • SAP Note 1304803 - Manual Deletion vs Changing Package to SDEL

    Good afternoon, Experts We're implementing this note and it is telling us to delete program TH_E070E but first it has us move it from package STRW to SDEL.  Package SDEL is labelled "Objects from SL Group Flagged for Deletion". My question is - Since

  • Multi-Factor Authentication desktop app?

    Is there a desktop app (Win 7/8) for authenticating against Azure Multi-Factor?  I've currently got a MFA provider spun up in Azure and the server installed on prem.  We are currently testing with it for two factor authentication to an RDS deployment

  • Invoice Recipient Address

    Hi Guys, I am working on SRM 4.0 classic. I have defined attribute ADDR_BILLT Invoice Recipient Address in PPOMA_BBP and put some value. ( Address to which invoicing party sends the address.) The invoce receipient address is already maintained using