TS1627 Please Help. I received 4 emails from 1 person with the same message heading. The emails were automatically grouped by Mail. I replied to the latest mail in the conversation. Once sent the other messages in the conversation disappeared. I NEED THEM

Please Help. I received 4 emails from 1 person with the same message heading. The emails were automatically grouped Apple Mail. I replied to the latest mail in the conversation. Once sent the other messages in the conversation disappeared. I NEED THEM BACK! They all had very important attachments. I have tried looking for them in deleted items, even though I didn't throw any of them away, still cant find them. Never had this problem before. I'm pretty sure its a setting somewhere. Also tried expanding all conversations, no luck. Searching for the mails under the sent email address, no luck.
I'm sure they are not deleted but have somehow been hidden by Mail. Very frustrating.
Thanks in advance for any help.
Kash.

I have found found out what has happened. I had requested a statement dating back to April 2012 from a supplier. They replied back with the latest statementof 2013 only but used the same subject heading as the previous monthly statements. Apple Mail automatically grouped these and I thought that they were sent altogether. As soon as I replied to the last email all other the previous emails ungrouped from the conversation leaving me lost as to where they had gone. They were all still sitting in my inbox but no longer part of the trcked conversation. I searched under the subject heading and all individual mails were all still there. (feeling stupid - )

Similar Messages

  • Please Help! Problems printing from Leopard with the Lexmark X5470!

    Hi,
    I have just installed Leopard, but the Lexmark X5470 printer I already had has stopped printing!? It will scan and clean the heads, but what ever i try i cannot get it to print???
    I looked around the internet for a solution, and I found out that you could install the needed drivers from the Leopard installation disk. But after trying this it still would not print??
    Please can someone let me know how i can get this to work?
    Thanks in advance

    Few questions for you:
    1) Is the Snow Leopard disc gray?
    2) How much RAM is in your computer?
    3) How much free space is on the hard drive?
    ~Lyssa

  • HT201493 How do I get my old apple ID/email from popping up and asking to verifie it's getting annoying? I've change everything to my new email an my old one keeps popping up please help me stop it from popping up all the time?

    How do I get my old apple ID/email from popping up and asking to verifie it's getting annoying? I've change everything to my new email an my old one keeps popping up please help me stop it from popping up all the time?

    Did you change the ID you are using for iCoud?  If so, did you delete the account, then sign back in with your new ID on your device?

  • HT4059 I currently use ibooks on my iphone 4s... I want to be able to send several pdf documents at the same time in one email, I thought there was a way to do this?  Can you help please?

    I currently use ibooks on my iphone 4s... I want to be able to send several documents at the same time in one email, I thought there was a way to do this?  Can you please help?

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Please help my ipod disconnected from the Internet and wont reconnect and i did the right password

    please help my ipod disconnected from the Internet and wont reconnect and i did the right password

    - Do other devices still connect to the network?
    - Does the iPod connect to other networks?
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router.
    - Reset networks settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points

  • If i used the same apple id and email to set up both my ipad and ipod what can i do to be able to use face time to call from one device to the other

    if i used the same apple id and email to set up both my ipad and ipod what can i do to be able to use face time to call from one device to the other

    They can share an Apple ID, but each device must use a different email address when setting up FaceTime.  Create a gmail email (or hotmail, or ...) address and use that on one of the devices when you setup FaceTime.
    You don't actually have to use the 'new' email address, it is probably just used as an index to reference the correct device when initiating a call via the FaceTime server.

  • PLEASE HELP. Cannot open a PDF document via a link in an email. I am using Mac 10.7.5 and Firefox.

    If I receive a PDF document attached to an email by way of an icon, I can double click on the PDF icon and the document opens. HOWEVER, if I receive a link to a PDF document in an email, and I click on the link which leads me to a webpage with another link to a PDF document, when I click on the document, a new web page opens but NOTHING happens - no download box - just nothing.
    Please help. This is so frustrating.
    Yes, I can right click and 'Save As' - but I don't want to. I want it to open as it used to open - displaying the open PDF document in a new web page.
    Then I tried to click on a download button on a website to retrieve my statement - but again, a new web page would open but it would be BLANK. No sign of any download.
    When I used to open PDFs on a webpage, I used to get the Download box which asked if I want to OPEN or SAVE. This doesn't appear any more.
    Any help would be appreciated.
    I have already gone to HD / Internet Plug-ins and deleted the two Adobe PDF plug ins - but this hasn't fixed my problem.

    Click on the below link :
    https://get.adobe.com/flashplayer/otherversions/
    Step 1: select Mac OS  X 10.6-`0.`0
    Step 2 : Safari and FIrefox
    Then click on " Download Now"  button.

  • PLEASE HELP!! CAN'T SYNC WITH OUTLOOK...AND ITS NOT THE 64 BIT VERSION

    PLEASE HELP ME!!
    I have a BB Storm2 9550. I had a laptop with Outlook 2007/Windows Vista/BB Desktop 5 and it synced fine.
    I now have a new laptop with Outlook 2010/Windows 7/ BB Desktop 6 and each time I try to configure the Organizer Data to select 'Outlook' for Calendar, Memo, Tasks, and Contacts and select NEXT I receive an error in Intellisync that says 'The Operation Terminated Unexpectedly'.
    I have tried completely uninstalling BB Desktop manager from the Application Data folders and registry, reinstalling 6.0, downgrading to 5.0 (which gives me a Microsoft Connector Error).
    I have also tried reinstalling Outlook. I read all of the posts concerning Outlook 2010 64bit but I am running the 34bit version. 
    Please help me.  Right now I don't have any contacts on my BlackBerry and I am so frustrated. I have tried to fix this for over a week now and all the posts I read don't seem to resolve my issue or I don't understand them.
    I'll even take suggestions for other ways to sync my data besides outlook (although that is not my preference)
    Thank you
    Solved!
    Go to Solution.

    Log in to an account that has administrator privileges.
    Open a command prompt.
    Type cd C:\Program Files\Research In Motion\BlackBerry Desktop\IntelliSync\Connectors\MS Outlook Connector.
    Type regsvr32 MsOutlookConnector.fil and press Enter.
    Note: For BlackBerry Desktop Manager 6.0, please use the following path:
    C:\Program Files\Research In Motion\BlackBerry Desktop\IntelliSync\Connectors\MS Outlook Connector
    Note: The following error message might be displayed when step 3 has been completed:
    The module msoutlookconnector.fil was loaded, but the call to DLLRegisterServer failed with error code 0x80070005
    If this happens, turn off the User Accounts Control (UAC) and register the MsOutlookConnector.fil file again.
    To turn off the UAC in Windows Vista, complete the following steps:
    Go to Start > Settings > Control Panel.
    Under User Accounts and Family settings, click Add or remove user account.
    Select one of the user accounts or the guest account.
    Under the account, click Go to the main User Account.
    Under Make changes to your user account, click the Change security settings link.
    Under Turn on User Account Control (UAC) to make your computer more secure, clear Use User Account Control (UAC) to help protect your computer and turn off the UAC.
    Click OK.
    Restart the computer.
    Give this a try it could be that the connector to ms outlook never registered properly.

  • Hi please help me I'm appleid disable 7.0.4 iPhone 5s by email and security questions forgot not active now please please help me

    Hi please help me I'm appleid disable 7.0.4 iPhone 5s by email and security questions forgot not active now please please help me

    You might be able to re-enable your account via this page : http://appleid.apple.com, then 'reset your password'
    You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it
    For your security questions, if you don't have a rescue email address, or you don't have access to the email account, then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699 - you can also try this link to get your account re-enabled if the above doesn't work.
    When they've been reset you can then use the steps half-way down this page to update/add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • Recieved email from WHICH with [Request ID :##55675##] : in the subject heading is crashing my THUNDERBIRD when I move the email from INBOX to local folders

    Recieved email from Computer Help at WHICH magazine with [Request ID :##55675##] : in the subject heading is crashing my THUNDERBIRD (and other programs) when I move the email from INBOX to local folders. The only work-around found so far is to shut them down with task manager, as they wont otherwise close.
    However if I move the Reply with the same subject heading from my SENT box to LOCAL FOLDERS I dont get the problem.
    Hav I found a faulty software trap in the base code.
    Thunderbird is up to date and it is on a 64kb intel i7 quad processor 8G ram desktop using windows 7 latest update.

    To diagnose problems with Thunderbird, try one of the following:
    *Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
    *Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
    ; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

  • Please help 'Translate' These codes from AS2 to AS3 for me

    Hi, i need help 'translating' these codes from Action Script 2 to Action Script 3. Please Do it for me:
    toc    loadText = new LoadVars();
        loadText.load("Curie.txt");
        loadText.onLoad = function(success) {
            if (success) {
                // trace(success);
                Curie.html = true;
                Curie.htmlText = this.Curie;
    Please translate it for me, i need it ASAP thanks
    Kenneth

    Thank you for helping me
    Kenneth
    Date: Thu, 15 Oct 2009 05:49:14 -0600
    From: [email protected]
    To: [email protected]
    Subject: Please help 'Translate' These codes from AS2 to AS3 for me
    Take a look at that:
    http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/migration.html
    There is a LoadVars section on that.
    There is also a tutorial here:
    http://www.republicofcode.com/tutorials/flash/as3externaltext/
    Cheers,
    CaioToOn!
    >

  • I add my comcast email to the mail on a iMac running Maverick. It downloads all my emails from there. How do i get my email to delete of the the server

    I add my comcast email to the mail on a iMac running Maverick. It downloads all my emails from there. How do i get my email to delete of the the server

    Go to Mail Preferences>Accounts, click the '+' button below the list of accounts and insert the settings, username and password as instructed. Some account types can be set up automatically as soon as Mail knows the emails address (because the server settings are built in), in other cases you will have to get them from your ISP.

  • Yesterday I have purchased Ipad2 with 3G but did not able see in built aceTime on my scree do we need to Install? please Help, yesterday I have purchased Ipad2 with 3G but did not able see in built FaceTime on my scree do we need to Install? please Help

    yesterday I have purchased Ipad2 with 3G but did not able see in built aceTime on my scree do we need to Install? please Help, yesterday I have purchased Ipad2 with 3G but did not able see in built FaceTime on my scree do we need to Install? please Help.

    See this support doc on how to use FT... http://support.apple.com/kb/HT4319

  • Whenever I open a file in Lion, other files of the same sort that I opened previously automatically open up. For example, if I open a .jpg file, numerous other .jpg files that I opened previously in the day open up. How do I prevent this from happening?

    Whenever I open a file in Lion, other files of the same sort that I opened previously automatically open up. For example, if I open a .jpg file, numerous other .jpg files that I opened previously in the day open up. How do I close these files to prevent them from showing up again, like in previous versions?

    Dealing With The Resume Feature of Lion
    Managing Mac OS X Lion's application resume feature.
    If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
    It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
    If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
    chflags nohidden ~/Library
    Press RETURN. Quit the Terminal application.
    In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
    Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
    The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it.

  • Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

    Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

    Many, many thanks for both of you Todd and Rick.
    to Rick:
    I suppose you mean the Color Settings in Project Settings as follows:
    - Working Space: None
    - Match Legacy ... Gamma Adjustments checked ON
    But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
    to both of you:
    Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
    What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
    So, would you have any solution for this problem?
    Again, many thanks for your fast replies!

Maybe you are looking for

  • Equal div heights

    Hello good people! Need a little bit newbie type help for working on CSS. Here's my code: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"         "http://www.w3.org/TR/html4/loose.dtd"> <HTML> <HEAD> <META content="text/html; charset=w

  • Vgaswitcheroo, /sys/kernel/debug/vgaswitcheroo is missing

    Hi all, I'm having troubles disabling my discrete graphics card (an ATI Radeon). I already tried this guide, but after completing all the steps (including mounting the debugfs) /sys/kernel/debug/vgaswitcheroo still doesn't appear. /proc/config.gz doe

  • Is it possible to delete multiple emails in my macbook air?

    Is it possible to delete multiple emails in my macbook air?

  • How to get item field values for old versions?

    I need to be able to query old field values from previous versions of items in a SharePoint list. I can't execute code on the server (it needs to work with SharePoint Online/O365 for a start). So far the ONLY API I've that lets me do this is the list

  • CD ROM content in DVD Studio Pro

    Hi. Does anyone know if it's possible to include content from a CD ROM created in Director in a DVD to be created in DVD Studio Pro? There's all the usual stuff - - an .exe file - a folder called DATA with all the images, sounds and video content in