TS3212 I have a problem with running the itunes download on my new toshiba satellite pro laptop,

I have downloaded the iTunes software no problems, but when i come to run it a windows pop up comes up saying,
"This installation package could not be opened. Verify that the package exists and that you can access it, or contact
the application verifier to verify that this is a valid window installer package"
as i mentioned it is a brand new Toshiba satellite pro running windows 7 professional,
any ideas????????????
mark

A lot of people have found this works for them:
Settings/General/Date and Time Turn OFF Set Automatically
Set the date to several years in the future
Try to update again - you will get a different error message
Go back and turn ON Set Automatically

Similar Messages

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

Hi Arika,
The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
All these drivers are available for downloading on ni.com. To get the drivers, go to ht
tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
I hope this information helps.
Best Regards,
Wilbur Shen
National Instruments

Problem with running the midlet class (Error with Installation suite )

hi everyone...
i have problem with running the midlet class(BluetoothChatMIDlet.java)
it keep showing me the same kind of error in the output pane of netbeans...
which is:
Installing suite from: http://127.0.0.1:49296/Chat.jad
[WARN] [rms ] javacall_file_open: wopen failed for: C:\Users\user\javame-sdk\3.0\work\0\appdb\delete_notify.dat
i also did some research on this but due to lack of forum that discussing about this,im end up no where..
from my research i also find out that some of the developer make a changes in class properties..
where they check the SIGN DISTRIBUTION...and also change the ALIAS to UNTRUSTED..after that,click the EXPORT KEY INTO JAVA ME SDK,PLATFORM,EMULATOR...
i did that but also didnt work out..
could any1 teach me how to fix it...
thanx in advance... :)

actually, i do my FYP on bluetooth chatting...
and there will be more than two emulators running at the same time..
one of my frens said that if u want to run more than one emulator u just simply click on run button..
and it will appear on the screen..

I have a problem with loading the PNG image

I have a problem with loading the PNG image from site. For ex. go to icefilms com and is starts to load png like crazy CPU is huge and you can not shut down Firefox at least a minute. This is not just in this site but whit any one whit lots of pictures.
Image from firefox: Picture [http://img836.imageshack.us/img836/9910/7312011103147pm.jpg 1] [http://img28.imageshack.us/img28/8505/7312011103249pm.jpg 2] [http://img706.imageshack.us/img706/5615/7312011103348pm.jpg 3 ][http://img827.imageshack.us/img827/8483/7312011103533pm.jpg 4]
This is my Task Manager [http://img217.imageshack.us/img217/5715/7312011103621pm.jpg 1]
- I try safe mode, same thing
-All addons and plugins are ok
Any idea why is this so big problem.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

I have a problem with Transport the personalization of standard ess compone

I have a problem with Transport the personalization of standard ess component.
My problem is in several components, such as:
portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/
com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/
com.sap.pct.erp.ess.area_personal_information/persinfo_es/com.sap.pct.erp.ess.13.pdata
I have personalized this page (into rol, not directly in the page), with Ctrl+Right button.
Now i transport the rol, from Development to Quality environment, but i don't see the changes in Quality.
My system is NW 7.01 SP7, Can be that the problem?
Any idea to solve this problem?

First please see note 1234273 which details how best to personalize
for all users.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/ed3ce7f8593eebe10000000
a1553f7/frameset.htm
Here you can read:
"If an iView is transported to another portal all these properties are
also transported. This is needed to make sure that role-specific changes
could be transported together with the role. End user personalization
data is NOT transported in this way as end user personalization is only
local to the current portal."
Could you please ensure that personalization was done by an admin user?
I'm afraid that if it was done by an end user, personalization isn´t
transported as it's explained in the documentation provided.
Could you please confirm whether you are using exactly the same language
to access to both systems, development and quality? Maybe you are using
language en(us) in one system and en(gb) in the other one. Please take
into account that personalization is language specific.
From the web dynpro end, the WebDynpro personalization is stored
NOT in the PCD prior to 710 release. And as such it cannot be included
in a portal role transport. This feature is available with NW 7.10 SP2
or later (from webdynpro point stand). The best option is to
go with NW 7.30 as this is the first NetWeaver release with EP since
NW 7.02.

Hello! The new version of Firefox I have a problem with opening the site VKontakte. The browser displays the following error: "Firefox has determined that the s

Hello!
The new version of Firefox I have a problem with opening the site VKontakte. The browser displays the following error: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
Sincerely, Vsevolod.

You're welcome

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board.

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board. How much will a new battery and motherboard cost and would it be worth it or should I just get a new computer. It was about 300 dollars to get it serviced last week. if it adds up to much past 600 dollars I will just get a new one. THANKS FOR ANY HELP!
P.S During classes today it began beeping in my bag. Like three kind of long steady beeps then a short pause, and when I opened it I couldn't see anything but it was on so I turned it off and back on.

Depends on what options your Apple store offers - if they can do a depot repair (where they send it out), that's around $300 for all parts & labor.
If the store doesn't have that option, a logicboard is around $600, battery $80-$100, from what I've seen.
If they JUST replaced the logicboard, you absolutely should NOT have to pay for another replacement - the replacement is covered by a warranty. If they want you to pay for it, make sure you have a copy of the receipt for the work that was recently completed so you can show it to them. They have no reason to charge you for another logicboard.
~Lyssa

HT204152 hello i have a problem with app store cant download program get this error verification required and no accept my visa card

hello i have a problem with app store cant download program get this error verification required and no accept my visa card

what i can start to download and updated programs

I ve a problem with running the javabeans

dear all
i ve a problem with running javabean in forms 9i all codes, program units are correct. i think there is something with classpath which i dont where to put the path of bean jar files. however the simple code for the Colorpicker and keyFilter dont work when clicking the button to fire the trigger to bring the bean up.
thank you
Walaa eddien

Walaa,
Make sure you've entered the implementation class (do not append the class extension). For example, if you have a class example.class in the package otn.oracle.forum, the implementation class should be: otn.oracle.forum.example
Make sure you place the containing java archive in <OH>/forms90/java and do not forget to update the configuration section (default or app specific) parameter archive_jini accordingly.
Jeroen van Schaijk

Dear apple community, now I have some problem with iPad(The New iPad 4G). 1st, start from I got it, it really difficult charge. 2nd, very and very hot with 3G or Internet using. And more, some problem with wifi.

From Me, THE MAHACHAK to Apple Company
I think, the apple company are producing and sell only their own country or their ownself, not over the world. And in the other hand, I want to ask Apple Company about their market policy as marketing strategy or size of marketing. How about it? How did you think? Only your own or for world. I like one word as MARKETING IS WATER. Where can't water go? Such as my small country have a lot of people are using apple products a lot as iPhone, iPad, iPod and apple laptop. Cambodia is my small country with much rich families. They can use a good product or high class product, high tenology. Most of products is Apple. But they always have many bad comments and bad problem with Apple products. WHY? The problems such as Lock code, cann't conected with other, hard to find or buy, no Safety, no warranty world wide, wifi, charger, hot during 3G conected, ...etc. hope, these my own idea is looked for all the Apple customers around the world. Please, text me back. Waiting back.
Thanks and Regard

Apple Discussions is a user to user forum, so your post is not read by any Apple employee.
 Cheers, Tom

[perhaps stupid] Problem with running the Sun's example

I am new to RMI and I was reading the tutorial of RMI provided by Sun. Now the question is: suppose I have examples.hello.HelloImpl class compiled and I want to run rmic in order to create stub and skeleton files. In which directory should I run rmic?

Run rmic from the directory where rmic can pick your classes.
As an example if your compiled client class is in
c:\rmitest\classes
run the rmic from there and make sure you specify -d . then it will generate the stubs and skeletons in the same directory. If you want to compile them somewhere else specify -d option to that folder.
Example use
to store stubs and skeletons in the same directory
c:\rmitest\classes> rmic -d . foo (where foo is your class name)
to store stubs and skeletons in a separate directory
c:\rmitest\classes> rmic -d "c:\mystubs\" foo (where foo is your class name)
Hope this helps :)

Problems with running the interop sample

Hi,
I can't seem to run the .NET client that is supplied with the interop samples
in the workshop that demonstrates the use of a .NET client with an asnyc WebLogic
web service. Everytime I run the .NET client, it prompts me to save a file called
"ConversationClient.asmx" and if I open it, its opened in VS .NET. Any ideas/suggestions?
Thanks,
August

August,
The readme.html which is present in the samples/interop/dotNet directory
provides detailed instructions for running that example. Please follow the
steps mentioned in there, and let me know if you face any issues.
Regards,
Anurag
"August" <[email protected]> wrote in message
news:3e56b164$[email protected]..
>
Hi,
I can't seem to run the .NET client that is supplied with the interopsamples
in the workshop that demonstrates the use of a .NET client with an asnycWebLogic
web service. Everytime I run the .NET client, it prompts me to save a filecalled
"ConversationClient.asmx" and if I open it, its opened in VS .NET. Anyideas/suggestions?
>
Thanks,
August

I have a problem with my headphone jack and i just bought my macbook pro 10 days ago., I have a problem with my headphone jack and i just bought my macbook pro 10 days ago.

I am having a problem with the jack in for the headphones. I have bought it brand new from a local authorised apple store about 10 days ago. As soon as I plugged in my headphones and tried them, the sound was coming out of one side of the headphone and the plug inside my macbook pro was loose. When i tried moving it the sound was coming out of the device. What can I do?

Take it back to the store you bought it from. It will definitely be taken care of

I have strange problems with logging into Itunes. How do I fix them?

After resetting my Apple ID's password which I haven't used in a few years, I logged in on the Itunes store. For some reason, it says it is my first time using my ID with Itunes Store, even though I have done so in the past. Then, it asked me to review my information, and the page just showed I had to put in my password. So I did that, and I pressed the continue button, and it said I hadn't completely filled out the form, and I needed to enter the birth date. But, there was nothing asking me for my birthdate on the form. What's going on?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Problems with copying my itunes library to a new laptop

I have just brought a new laptop (Windows 7) and I am trying to copy my iTunes from my old laptop (Windows Vista) to my new one but it doesn't seem to be working... I know how to copy the music across but I want to copy all the playlists across too as I use them frequently and don't particularly want to re-do all of them.
I have tried copying my iTunes folder onto my external hard drive and then connecting my external hard drive to my new computer and copying the folder into the iTunes folder on it. But it won't copy across and it gives no explanation why. I copy it and a dialogue box comes up saying 'preparing to copy' and then it just goes and nothing else happens...
Am I doing something wrong? Is there an easier way to do this? I've seen some posts that mention networking the computers but I've tried this and because they operate on different systems it isn't working...
Please Help!!

Hi there StevieJ,
You may find the information in the article below helpful.
How to find and remove duplicate items in your iTunes library
http://support.apple.com/kb/ht2905
-Griff W.

TS3212 I have a problem with running the itunes download on my new toshiba satellite pro laptop,

Similar Messages

Maybe you are looking for