TS3297 what is error -100000?

The song won't finish downloading. Why isn't there a report problem link somewhere?

Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

Similar Messages

TS3297 what is error code -8003 ?

What is error Code - 8003?

Trash problem go here for a fix to troubleshoothttp://www.thexlab.com/faqs/trash.html
Try holding option key while deleting trash

TS3297 what is error 42110???

Everytime I connect my iphone 3 gs to itunes it says unknown error 42110... I just want it to go away... please tell me how!
Toby

Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

TS3297 What is Error 8201 that I get when I try to download songs from iTunes?

Anyone help?

See if either of these threads help fix it :
https://discussions.apple.com/message/17237169#17237169
https://discussions.apple.com/message/18957739#18957739

TS1424 error -100000 what is this?

I downloaded a Joss Stone album and one of the songs didn't download because an error -100000 happened. What does this mean and how do I get this song that I paid for? Any help would be great, thanks.

Mine would give me that error if Genius data was updating in iTunes. I turned Genius OFF then back ON (logged back in) using the Store Menu commands and the problem went away.

How do you fix error -100000?

I have bought 2 albums and 3 individual songs from the iTunes store recently and all of them have downloaded successfully. Well, all of them but two. They insist on not downloading, and I seem to see getting taht the files are corrupt and that the error is -100000. I do not know how to fix this and I hope I get some help soon.
The songs were Burn the Night Away by There for Tomorrow, and Au nom des cieux galvanises by Pierre Lapointe and iTunes is updated to 10.6.
Hope this gets solved soon.

I bought an external hard drive, backed up my important docs and photos, and reset computer to factory setting. Seems to be working - I can actually download and get my music from the Cloud! Still don't know what the error is, since my Apple rep stopped replying to me after my case has been open for 6 months, but at least the program is working again. Good luck!

ITunes download error -100000

Downloaded an album, and one song is giving me download error - stopped -100000. I've tried to restart the download a couple times, but it runs, pretends it's downloading and then gives me the error. The internet doesn't seem to know what error -100000 is. Anyone here know?
I've downloaded other songs since the error, and this one just hangs out in the Downloads view.

try this solution: https://discussions.apple.com/message/17908124#17908124

What is Error code on the ipod -39

Does anyone know what the error code -39 Is

Hello palbert-58,
Welcome to the Apple Support Communities. Looking into your issues iTunes giving an “An Unknown Error occurred (-39)", I found two articles, one that gives a list possible errors and the other is the troubleshooting steps for that specific error.
iTunes: Possible iTunes Store errors
http://support.apple.com/kb/ts1424
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Regards,
-Norm G.

ITunes song error -100000 (1 problem song, other 13 ok)

I recently bought an album on the iTunes store. 13 out of the 14 songs downloaded fine, however the first song won't download.
I googled error -100000 and found out it could be something to do with conflicting software on my computer, so I attempted to download the song on my iPhone, but it still failed.
Some help threads also suggest deleting the temp files in the download folder, and downloading it again. I have also tried this, selecting both "check available downloads" and "Download past purchases". Neither works. I have tried restarting itunes (obviously).
When it attempts to download, it will get into a continuous loop of going 0%-100% and then back to 0% again. After several attempts it will display the error -100000 citing the song file may be corrupted. As I mentioned, the rest of the album downloaded absolutely fine with zero problems, it's just this one song.
What other steps could I take? I don't perticularly want to spend £0.99 to download the same song from a diferent album if I can help it.

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

HT203200 what does error code 42408 mean

what does error code -42408 while trying to authorize your computer mean?

maybe your router firewall block ports itunes uses chk http://support.apple.com/kb/TS1629?viewlocale=en_US
do you could login on http://appleid.apple.com ?
try: http://support.apple.com/kb/TS3297
info: http://support.apple.com/kb/TS3258?viewlocale=en_US
iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3

Error -100000 when downloading songs from iTune

Have have several songs that I have purchased thru iTune that will not download. I get an error -100000 that says the file is corrupted. I have tried repeatable to download the songs but get the same error everytime. What can I do to get the songs that I have paid for?
Thanks

Because it was not made available as a single by the record label to iTunes.

TS4062 what is error (-50)

What is the error (-50) mean?

iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - includes list of iTunes error codes
err = -50 when downloading from store - https://discussions.apple.com/thread/3697501 - delete incomplete downloads from downloads folder as per http://support.apple.com/kb/TS3297
iTunes Store: "Error (-50)" when downloading purchased content - http://support.apple.com/kb/TS1583
Error -50 is a very unhelpful generic communications error with a number of possible causes. Something between the drive to which you are downloading and the drive from which it is all coming is not working correctly, which probably leaves several hundred options.

What does "Error 10" mean? "An error occurred while loading your project. 10"

Does anyone know what "Error 10" means? For the first time, I'm getting a message that says, "An error occurred while loading your project. 10". I'm getting this message when I try to open a project that I created yesterday.
I'm using Adobe Premiere 6 on a Windows 7 machine. I have over 20 gigs of open space on the drive with all the project and support files. And this machine with 2 gigs of RAM never has a problem opening other similar Premeire project files with even more still images plugged in.
All of my Premiere project files have always opened with no problem. A similar file that this project file was created from with all the same base elements still opens with no problem.
This file almost finishes the "Loading Project - checking files..." process, but then I get the error message.
I had also saved a duplicate backup file for the project in question and it will not open either, so I believe that rules out a corrupt file... it is only this one project that I created yesterday that will not open. This project file is only about 5.7 megabytes in size.
This file has many still images plugged in to it, but all the same images are plugged in to another base file that still opens correctly.
I've also tried closing all other apps to save memory but I still get the error. I've also tried opening this problem file from within the application and I still get the same error message.
I read some troubleshooting information on the Adobe website about files that give error messages that will not open and it recommended adjusting the size of the virtual memory paging file in the system settings to twice the amount of RAM that is installed instead of being on the automatic setting, so I followed the instruction verbatim and restarted my machine and I still get the error message.
I've also read other troubleshooting info on the Adobe site that recommends to "delete the application preferences file" and "recreate the plugin cache file", but I'm not sure if "Error 10" indicates that those things are the correct procedures to use.
I could re-create this project file, but it has many tricky cutting and motion setting edits that will be difficult to reproduce and it took me a full day to create this project file.
Also, yesterday before initially closing this file, I was able to successfully render a test version to an AVI file and that video file plays fine, but neither the original project file nor the duplicate will open... I'm always getting the "An error occurred while loading your project. 10" after the file almost finishes the "Loading Project - checking files..." process... it almost finishes opening but then I get the error message.
Thanks for any input on this problem. You can see the error message screenshot below.
digi

Thanks Bill... me too.
After writing to Dennis Radeke on an Adobe.com blog about this and getting his very limited response, I wrote to him quoting something I read on the wiki page that you sent me the link to...
Adobe blog:
http://http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html#co mment-2701
Wiki page link that you gave me:
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
Here's what my response today was...
Thanks for your reply DR.
My old version of Premiere 6 works perfectly on Windows 7. I’ve created over a thousand different Premiere project files on this 5 year-old PC that was updated to Windows 7 last year.
All of my other Premiere 6 files open and maintain their original editability and all the features in this ancient version of Premiere work very well.
I own and use mostly Mac machines but I have one 5 year-old PC with a 160 gig hard drive with Windows 7 that I run Premiere 6 on because it’s a thousand dollar program that I had from 10 years ago that I didn’t want to repurchase. Buying a newer PC 5 years ago was far less expensive than buying a new copy of Premiere. Some people seem to think, “Wow, just buy a new version of the software for a thousand dollars and a new computer with a 5 Terabyte hard drive.”, but that isn’t always the reality of some peoples financial situation.
With 20 gigs of open HD space, all of my previous, even more complex Premiere 6 files still open and edit just fine. It is only this one file that I created Thursday that won’t re-open after closing it for the first time. Since the backup copy of that file won’t open either, and all the support files open, play and work in other previous project files, I’m thinking that there is some glitch that happened when saving this file that is corrupting it now, making it unable to be re-opened.
Based on prior advice on multiple topics about Premiere 6 from people on the Adobe forum who use only newer versions of Premiere, most information that applies to the brand new Premiere Pro CS5 still seems to apply to the old Premiere 6.
I found that holding down Shift-Option while opening Premiere 6 trashes the preferences file. This became my work around since I can’t locate the preferences file based on your path noted (in your blog) nor via the other prefs file path published on the Adobe website.
But unfortunately, trashing the prefs file, resetting the plugin cache file, increasing the virtual memory paging file size, importing the problem project file in to a new project, nor anything else is working to allow this file to open.
Now I’m looking in to XML:Wrench to see if that can find the corruption in this file, but I’ve had a malware warning from one download source and the xmlwrench.com website says their download is only a demo version, but no price is listed… this seems somewhat strange and possibly deceptive.
But I read something on an Premiere Pro wiki page , quoted below, at this URL, that seems to be pertinent, and though my version of Premiere may be ancient, it seems that, according to this user’s concerns, Adobe is still having problems with current versions of Adobe software creating corrupt files…
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
QUOTE:
“Can someone please advise – why on EARTH we should have to download XML Wrench and manually fix a corrupt Adobe project??? This is something common to all the Adobe “Support” forums on issues like this, and the many others that plague Adobe’s product (and I’m not being a mindless troll – I’ve been forced to use it for years so I do know the usability and other issues it has): it seems that people are excited because they’ve found a “fix” (which is more like a work-around) – purely because they’re understandably ecstatic that all their hard work isn’t comPLETEly lost.
However, Adobe should be making sure their product isn’t so buggy! This issue should be fixed (as just one example). Adobe should be finding out what causes the corruption in the first place and fixing it. And whether it’s some other codec on the system that’s caused it is no excuse – their software should have better error management built into it. I’ve seen other issues where an Adobe support representative has happily replied: “oh, that’s a known issue since version [3 versions back] – don’t worry, most users are aware of the work around for it: just select and move all of the items in your timeline each time you open the project and you’ll be fine!”
I’m sorry to rant on – but can some other users please explain the above to me? (i.e. why aren’t more people annoyed about this and complaining to Adobe to fix these things).”
UNQUOTE
All of this coming from an experienced user of Adobe products complaining about needing XML:Wrench to fix corrupt Adobe files seems relevant.
In addition, why does no one, including the Adobe knowledge base, have any info about what “An error occurred while loading your project. 10″ means?… why isn’t there a database that identifies Adobe error numbers by the simple number itself? The only info I was able to find identifying “Error 10″ on the Adobe site was a software installation error, not a project loading error.
Now I find myself chasing a clean download of XML:Wrench in order to hopefully fix this corrupt file. Whether I’m using Premiere 6 on a 160 gig hard drive with 20 gigs of open space or Premiere Pro CS5 on a 5 Terabyte hard drive with 3 Terabytes of open space, the problems, according to other users, seem to be the same as ever with corrupt Adobe Premiere files, based on what I’ve been reading across the internet.

What does error message 150:30 in Photoshop Elements 8 mean?

I have adobe photoshop elements 8 and, out of the blue, I get a message stating that I need to reboot for it to work. I reboot and it still doesn't work. Then there is an Error message 150:30 exhibited on the page. Adobe is too irresponsible to simply tell me what the error message means or provide a list for it, at least one I can find so I thought I'd solicit the good graces of other for help since help from Adobe is simply a shakedown for money due to their negligence and failure to support their products.

What's your OS? If you are on a Mac then try this Adobe Official Solution:
<http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html>
Hope this gets you started.

What does (error code -600) mean?

What does (error code -600) mean?
I received this code in a pop up window while trying to open iTunes from my Apps folder.

procNotFound
= -600, /*no eligible process with specified descriptor*/
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Any change?

TS3297 what is error -100000?

Similar Messages

Maybe you are looking for