TS3406 I have an Iphone 4s. When I make a phone call I cannot here the phone ring or the person on the other line pick up, unless I go to speaker phone. How does one resolve this phone issue?

I have an Iphone 4s. When I make a phone call I cannot here the phone ring or the person on the other line pick up, unless I go to speaker phone. How does one resolve this phone issue?

Hi there MitchR12,
You may find the troubleshooting steps in the article below helpful.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
-Griff W.

Similar Messages

HT1600 update Apple TV via settings general update software advise Apple support. But Airplay won't display the Apple Tv because it needs an updated compatible software. Catch 22. How does one resolve this contradiction please? Paul

update Apple TV via settings>general>update software advise Apple support. But Airplay won't display the Apple Tv because it needs an updated compatible software. Catch 22. How does one resolve this contradiction please? Paul

only the following macs support airplay mirror
http://support.apple.com/kb/ht5404

I have 3G I Phone and just got new pc. Have run sync in I tunes but none of the songs, etc are being transferred from the Phone to the new computer. How does one accomplish this?

I have a 3G I Phone and Just got a new PC. Have run a sync in I tunes but none of he songs, etc. in the I phone have transferred over. How does one accomplish this taks?

Only iTunes purchases may copy over via File > Transfer Purchases - otherwise syncing is one way, from the computer to the device. To get the rest of your music/films etc onto the new computer you can copy the backup from your old computer onto the new one and then load them into iTunes

With my new macbook I attempted to open an older spreadsheet and get the following error message: "This spreadsheet cannot be opened because ti is too old. To open it, save it with numbers '09 first" So how does one do this when I only have ver3.1?

With my new macbook I attempted to open an older spreadsheet and get the following error message: "This spreadsheet cannot be opened because ti is too old. To open it, save it with numbers '09 first" So how does one do this when I only have ver3.1?

Numbers 3.x can only open Numbers '09 and later. You will need Numbers '09 to open Numbers '08 files.
If it is a single file (or only a few) you can email me and I will open and convert then email back. My email address is in the "Biography" of my profile.
You may have Numbers '09 installed. Look in the folder "/Applications/iWork '09" if Numbers is in that folder launch it, open the file you tried to open, and save. Then you should be able to open in Numbers 3.x

Somehow I turned off the crosshair in the center of the Liquify tool. How does one turn this on/off?

In PS CS 6, I somehow turned off the crosshair that used to be in the center of the Liquify tool. I'd like to get it back. How does one turn this on/off?

The newest version of GPU Liquify now obeys the Photoshop preference "Show crosshair in brush tip" under cursors. Check this on in your prefs and you should be good to go.Non-GPU mode always has the crosshairs.
The cursor ring was also improved to be thinner and less jagged. Also the crosshair size was reduced. Red rubylith was added to see the drag changes in density on vertical drags. Enjoy.

Getting Rid of TRIGGERS - Just How Does One Do This

Hi,
I have a trigger that I'm trying to get rid of in my DB.
So logically, I attempt a
DELETE TRIGGER triggername;
But it doesn't work.
Anyone have any idea how to do this?
thank you.

And the other thing you can do is stop posting duplicate threads.
Getting Rid of TRIGGERS - How Does One Do This?

I have an iphone 4s, when i make a call i can hear them but they cant hear me so i have to put it on loud speaker

i have an iphone 4s, when i make a call i can hear them but they cant hear me so i have to put it on loud speaker

Hi gallimore1998,
It sounds like you may be having an issue with one of the microphones on your iPhone. Here is an article that will help you address this:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I try to open docs off the web (ie: floorplans) and I get error message stating I need to accept End User Lic Agreement.How can I resolve this?

I try to open docs off the web (ie: floorplans) and I get error message stating I need to accept End User Lic Agreement.How can I resolve this?

/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app
*Note, the ".app" file extension for the application is usually hidden from users view.

Unable to regenerate /dev/rmt/0 drivers with cfgadm -c configure on Solaris 10 update 11 (1/13). How does one do this for SAS HBA StorageTek Autoloader?

How does one regenerate the /dev/rmt/0 when cfgadm -c configure <device> will not rebuild it? Have attempted reboot -- -r, with modifing /kernel/drv/st.conf as well as /kernel/drv/sgen.conf. Running on a SPARC T4-1 Solaris 10 updat3 11, (1/13).

This has been resolved. Getting the /etc/driver_aliases set correctly: # update_drv -d -i st; update_drv -d -i sgen; add_drv -m '* 0600 root sys' -i '"scsiclass,01" "scsiclass,08" wa' worked. Making sure the st and sgen entries are in /etc/name_to_major were needed. For the Simpana/CommVault WA drivers, in opt/simpana/WA/wa.conf with the name="wa" parent="fp" target=16 lun=0 fc-port-wwn="device's World Wide Number> added for each lun 0 to 7. Then the touch /reconfigure; reboot worked. First the c1::rmt/0 tape and c1::scsi/changer/<wwn> med-changer were mapped. After modifying the minor_perm ('* 0600 root sys') and name_to_major entries, the WA CommValt entries , WA drivers showed up in cfgadm -al as c1::wa0 tape and c1::wa1 med-changer, only recognizable from CommVault. Also had to update the SAS-2 HBA StoregTek Autoloader driver with patch 145648-05. Solaris 10 update 11 (1/13) comes with 145648-03. In our particular case, we found cfgadm -al mapped SAS-2 HBA to c1 using the single mini-sas 6gb connector cable, where it mapped to c7 with the four tail connector.

HT1212 my niece lockup her ipod and don't remember password and/or it dont work now   there no access to setting to wipe and reformat how does one do this

How does one redo a 8GB ipod? My neice has one and lock it with a password and now password dosen't work and/or she forgot it! It give message ipod is diable! connect to Itunes! I've done that and the device doesn't showup in itunes, keep getting a message that password is needed! But there no input for that on the phone either! So I thought I would just dump and reformat and reinstall software, but I'm using windows and the device dosen't show up! Anyone!!!!! got a answer!
Thanks

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Re : changing apps store. I live in Sydney Australia . I am stuck in the British App Store. The I Pad tells me to " switch to the Australian store". How does one accomplish this task. Many thanks.

I live in Sydney Australia. I am stuck in the British apps store. The I Pad tells me to " switch to the Australian apps store". How does one accomplish such a task.
Many thanks and greetings from sunny Sydney.

Settings>iTunes & App Stores>Apple ID
Tap your ID
Tap View Apple ID
Enter your password
Go to Country/Region to change the store.

What is "normal URL's load"? How does one do this?

I osted that my pwerbook showed 4 bars (wireless) but said I was not connected. I have had man, many problems with my MBP regarding connecting to the internet wirelessly.
iVmichael was kind enough to give the following response:
"That URL throws an error in every browser I try, do 'normal' URL's load OK ?"
What is a "normal URL load", and how do I do this.
Thanks for the help.

Normal URLs are sites like http://www.google.com or http://www.cnn.com and he is asking if those sites load normally (i.e. do you get the google search page or the CNN home page with the above links).

I can't find Citrix Receiver on App store and when I down load from Citrix; the site links to App Store and I get "Your request could not be completed" - how does one load with no issues? I have an Imac Intel on Mac OS X 10.6

How do I load Citrix Receiver on my iMac? App Store search came up with zip. Tried from Citrix website, it tried to hook up with App Store snd I got this message: "your request could not be completed". Any ideas?

I see the same dialog and definitely can't locate the app on the App Store.
Try their support page > http://www.citrix.com/support

I get an'MSQL error number2002' when trying to use my toolbar game button how does one fix this

MSQL error number 2002

I can access the internet just fine in the browser and i can use any other app i have.
Sent from my Verizon Wireless 4G LTE DROID

How does Verizon resolve customer Service issues?

I've spent the last 4 hours having no service. Talked to different representatives on the phone and made 2 trips to the store to figure out what was wrong with my device and I keep getting different answers, none of them the same. How do they respond to major customer service complaints?

Hi austinb,
It's unfortunate that you were having issues with your service and that you received conflicting information without a resolution. I know your time is valuable and I want you to enjoy your VZW experience despite the channel you select to communicate with us. I would be happy to address your concerns and submit the necessary feedback regarding your recent customer service experience. At you leisure, please DM me the details of your concern and your wireless number. I look forward to hearing from you soon.
Thanks for your involvement in our community forums,
AyaniB_VZW
Follow us on Twitter @VZWSupport

TS3406 I have an Iphone 4s. When I make a phone call I cannot here the phone ring or the person on the other line pick up, unless I go to speaker phone. How does one resolve this phone issue?

Similar Messages

Maybe you are looking for