TS3623 I cannot activate my 3rd gn AppleTV due to NetworkTime problems, what is that? I am able to mirror fine. And my network read shows that I am accessing my network, with good signal strength, but the net work time has stopped me cold.

I am able to mirror fine, but that limits me, my wifi extend only to airplay, my ipad, my iphone, but not the store, or netflix Network stats are good, and signal strength excellent, but due to the problem of failing to  set my Network time no activation. I have unplugged and replugged so many times my i need to see a chiropractor. What gives, I have seen this question on the forums but no diffinative answer. HELP!! —Bob

Try a reset or restore if you can get to that.  I found when trying to use a wired ethernet setup (which wouldn't work but that is another story) that I couldn't even get to the menus without the atv3 wanting to connect with apple for the time.  When I went back to wireless, I got the tome sync to let me get to the menus but then an apple rep had me restore or reboot (I forgot which sorry) and then I finally got my wired connection to work.  That is, until tonight and I am having to download the 4 hour update.  Download to what, I don't know.

Similar Messages

  • Have just arrived in New Zealand, and have connected to local wi fi network with go signal strength, but phone keeps saying no service?  Any idea what to do?

    Have just arrived in New Zealand, have connected through local wi fi network, have good signal strength, but phone says no service, cant send texts out! any ideas?

    Text messages are sent via the cellular network, not wi-fi. Only iMessages are sent via wi-fi. Unless you have roaming turned on for the phone, or you have an unlocked phone that you installed a local SIM, you would continue to see No Service. That reflects your cellular carrier service. Connecting to wi-fi has no bearing on your cellular service, which is what displays on the status bar of the phone near the signal bars (circles/dots).

  • My PC is communicating with my HP C309a wirelessly, but the Hp solution Center has stopped working.

    My PC (Dell XPS 9000) is communicating with my HP C309a wirelessly for printing, but the Hp solution Center has stopped working. Shouldn't I be able to use all functions wirelessly?
    I'm getting an error message "HP Solution Center cannot run because your device installation is not complete. Please plug in the usb cable or re-run the set-up program from the instattation CD for a network installation."  When I put the installation disk in to remedy the problem, it tells me that my present software is the latest so it won't update. When I go to the update center, it tells me I have the latest software.
    This question was solved.
    View Solution.

    Hi,
     Try  these:
     Click Start Menu icon>Programs>HP>HP Photosmart c309a>Add a Device
    With this, it will find the wireless printer and reconfigure the settings; simply follow the prompts. After completion, try to reopen HP Solution Center.
    Kiko

  • My T40 shows connected to Wireless with Excellent signal strength but I can't open Internet Explorer

    When I turn my T40 on it shows connected to my home wireless with excellent signal strength but I can't get the Internet Explorer to open and can't get to the internet.  Please help! 

    Karen wrote:
    (because I wanted it to have the same static IP address as the router).
    Just wanted to clarify what you meant in this post. If you entered the router's IP address as the static IP for the laptop, you would get the symptoms that you are describing. Try entering a IP that isn't normally used like 192.168.1.142. (That is assuming that your router IP is the default 192.168.1.1.)
    If that isn't the issue, please tell me what ipconfig is returning on both the laptop and the desktop.
    Royce

  • I have AirPort Extreme and cannot connect to the internet with a land line but the WiFi works

    I have an AirPort Extreme and have been using for several months successfully, but as of two weeks ago, the line that I have hooked up to my desktop no longer provides internet service, but the WiFi works fine for the I-Pad and I-Pod.
    I have checked with my service provider and my modem works successfully hooked up the the AirPort extreme or directly to the PC.  When I am hooked in from the modem directly to my PC, I have internet for my desktop, but of course no WiFi.
    If I connect the Modem to the Router and the router to my desktop, I have WiFi, but no internet service to my desktop.
    I have replaced the network cable but to no avail.
    Any suggestions?

    It appears that there may be something amiss with the Ethernet switch that is built-in the 802.11n AirPort Extreme Base Station (AEBSn) or its configuration settings may be incorrect. I assume that you also tried using the other LAN ports on the AEBSn and the outcome was the same ... no Internet access via a wired connection.
    One thing to try is to change the Ethernet adapter settings on the PC. It is possible that its current settings may be appropriate when connected directly to the Internet modem, but may be off for connecting to the AEBSn. If your PC's Ethernet adapter has options to control Speed, Duplex, & MTU, I would change these to the following respectively: 1000 Mbps, Full duplex, & 1500

  • HT1430 I would like to reset the iphone but the sleep wake button has stopped working

    how to reset the phone without erasing my data when the sleep wake button has stopped working.  the phone is frozen

    "Why didn't iCare staff which is Apple's do something..."
    They did.  They told you what you should do to get the problem resolve.  Too, "iCare" is an AASP and provides service for Apple's products, but the staff is not employed by Apple.  It's not an "Apple Store".

  • TS1398 my problem is my iphone 4s is connected to the internet(wi-fi) with full signal strength but freezes when browsing and says "Cannot Open Page, Safari could not open page because the server stopped responding".

    my problem is my iphone 4s is connected to wi-fi with full signal(3 bars) strength but freezes when browsing and says
    "Cannot Open Page"
    "Safari could not open page because the server stopped responding"
    I already reset the iphone to its factory settings and erase all contents but still the browsing speed freezes or not searching at all. Sometimes it will work and fast but then the problem uccors every now and then. Iv'e been using iphone 4 for two years and I still have it and works fine compared to this IPHONE 4S.

    Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
    IF that does not work -
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Finally - if problem still present -
    Go to Settings>General>Reset
         Reset the network settings - you will need to add the password of your home WiFi in your phone once more
    The device should turn itself off & back on then go into Settings>Wifi and join your network

  • Why doesn't airport always send or receive with good signal strength

    Why doesn't my MacBook Pro AirPort always send and receive when it indicated an excellent strength signal?  When it doesn't work I have to turn AirPort off and then back on.

    Mac OS X (10.6.2)
    Update your OS & all other software through Software Update.  Your current OS is outdated.
    When I compose an email to send, it will not send.
    Which email client are you using?  If a 3rd party email client, you need to contact them.  If Apple's Mail, you should post in the SL Mail forum community:  https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard>Refine this list... > Mail & Address Book
    Or cross-post in one of the Airport communities:  https://discussions.apple.com/community/wireless/airport

  • HT1459 Whenever I try to activate my 4th generation iPod Touch bought today, via my home router (Asus) which has a good signal, I get the warning: "Your iPod Touch could not be activated because the activation server cannot be reached." Very frustrating.

    Whenever I try to activate my 4th generation iPod Touch bought today, via my home router (Asus) which has a good signal, I get the warning: "Your iPod Touch could not be activated because the activation server cannot be reached." Very frustrating. When I try to activate it via iTunes on my HP laptop, it won't do it either. Very frustrated and unimpressed.

    You are running into the activation lock.
    iCloud: Find My iPhone Activation Lock in iOS 7
    You have to either enter the Apple/iCloud ID and password in order to activate the iPod for use. Or you can try to dissassociate the iPod for that account by:
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    If you can't do that you have a nice, thin but expensive brick

  • I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

    I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

    banannaphone,
    Welcome to Apple Discussions.
    Quit Safari, find the com.apple.Safari.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder, drag it to the Desktop, log out/in or restart and let us know what happens.
    ;~)

  • I'm trying to associate my iphone serial num with my apple profile, but the system say that the number is not good !

    I'm trying to associate my iphone serial num with my apple profile, but the system say that the number is not good !

    it is correct in this link;
    but in the https://supportprofile.apple.com/PramAddRegisterProduct.do
    the message indicate the (same) number is not valide

  • After updating my Iphone 4 on iOS7, my microphone stopped working when someone is calling me(or when I call someone). But the mic works with other applications like Skype... Any ideas ? Thanks.

    After updating my Iphone 4 on iOS7, my microphone stopped working when someone is calling me(or when I call someone). But the mic works with other applications like Skype...
    Any ideas ? Thanks.

    Hi Anis289,
    Welcome to the Support Communities!
    As a first step, I would suggest restarting and/or resetting the iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Here are some additional troubleshooting steps for sound on your iPhone:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    - Judy

  • A PO has posted,goods r received but the invoice is not matching with the..

    hi
    A PO has posted,goods r received but the invoice is not matching with the PO as the TAX was reduced after posting. PLz clarify
    can some explain the issue plz

    Hi,
    1. You are talking about which tax (Is it Excise Duty + CST/VAT) if yes then you can post the Excise invoice with correct duty amount in J1IEX and then same will get defaulted in MIRO as per the duty posted in Excise Invoice not as per PO.
    If you have already posted the  excise invoice then go for cancellation of same in J1IEX and then cancel GR and Post excise invoice to reverse Part 2 entries and then again do GR and Post Excise invoice with correct amount and then do LIV.
    2. If it is only CST / VAT then simply use the appropriate tax code in MIRO as per the revised tax rate.
    For e.g. if in PO Tax code is 4% VAT and now if you get invoice of say 1% VAT from vendor then simply select the tax code of 1% VAT in MIRO similarly can be done in case of CST and Service Tax also. Only in case of Excise duty you have to follow the above method.

  • My iMessage only works with one contact in my phone. I text several people that have the iphone 4s, theirs works with other people. But mine only works with one person. Why?

    My iMessage only works with one contact in my phone. I text several people that have the iphone 4s, theirs works with other people. But mine only works with one person. Why?

    about message http://support.apple.com/kb/HT3529
    troubleshooting message http://support.apple.com/kb/ts2755

  • Does the Note 4 have better signal strength than the Note 3?

    I have a note 3 that continually drops calls and bounces from 4 bars to 1 bar over the course of time with the phone being stationary.  I believe my problems started with the last software update (as documented in numerous forums) but both Verizon and Samsung give no credibility to problems raised on internet forums.  The people on these forums apparently "lack technical expertise" was my take on their explanation. 
    So far they, Verizon, is following exactly the same course of action to try to correct my issues as other folks have stated they tried with tech support.  Replacement of the SIM card did nothing.  Software reflash is next followed by a factory reset with no additional apps allowed to download to the phone. 
    I have not looked at a Note 4 nor do I know anyone that has one so I am reaching out for information.  What is the Note 4 running for software and if you owned a Note 3 previously did you experience signal strength issues where you felt you shouldn't have?  If you had, or have, weak signal strength were you able to compare it to another android phone on the same carrier to see if the problem was specific to you phone?
    I understand the bars are not the best indication of signal strength but they are a quick indication.  Under the mobile networks I usually have -100+ dBm and 30 +asu.  If it is a software caused problem neither Verizon or Samsung knows anything about it which is good news because they should be able to correct it.  I have my doubts the people on the forums are the crackpots they make them out to be.  I suggested they are people like me who are desperate for help with a problem Verizon gave up on. 
    If the Note 4 is better I know what to ask for when they hit the end of the road with me.  That will happen software and reset wise in the next week then I am off to "getting someone else's problem phone" sent to me for a swap.  Last time they tried this the junk phone they sent didn't even recognize the sim card! 
    Thanks for any facts you can provide about your experience with the Note 3 and Note 4 as related to signal strength in both areas with strong and marginal service.

    I have an iPhone 6 on Sprint for work and it stinks, I don't like the service or the phone.  Had an iPhone 5s prior and although I didn't care for it it was still better than the 6.
    I had a software reflash done at Best Buy and a factory reset at Wireless world.  Reflash went smooth but I should have done the factory reset myself or had Best Buy do it.  It will take me days to get the phone back to where I had it.  Kies software from Samsung does backup the phone but you lose all the changes you have made to the Home screens and some other apps need attention to get them functional. 
    Signal strength remains the same but need to use it for a few days to know if it still drops calls and breaks up.  If it does next on the list is running in safe mode for a few days to see if an app is causing it.  If the problem still persists I have the choice of replacing it with insurance, money out of my pocket.  Sending it to Samsung for testing and repair (if necessary), or having Verizon send a replacement refurbished phone.  Probably will go with the refurbished phone and hang on to mine for a few days as well.  If the refurb isn't any better I will return it and then send mine to Samsung. 
    According to Wireless World the insurance company will pay me for my phone if I trade it in before a year is up.  May get up to 50% of full retail.  Not sure what to trade it in for if I go that route.

Maybe you are looking for