TS3694 iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)

this issue , happen to my iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)
Sudden screen : USB pointing to iTunes . it shows that it need a restore and update .. after downloading the software
and extracting .. found Error1 at the point Verify firmware . AGAIN AND
and this is the log ..
2014-08-11 15:46:30.611 [4472:1648]: restore library built Feb 12 2014 at 16:27:17
2014-08-11 15:46:30.611 [4472:1648]: iTunes: iTunes 11.3.1.2
2014-08-11 15:46:30.611 [4472:1648]: iTunes: Software payload version: 11D257 (option key)
2014-08-11 15:46:30.611 [4472:1648]: iTunes: Using MobileRestore state machine
[13:47:25.0555] Changing state from 'Idle' to 'Restoring'
[13:47:25.0555] device software does not support nonce generation
[13:47:25.0555] requested restore behavior: Erase
[13:47:25.0570] requested variant: Erase
[13:47:25.0570] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 061FEA80 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 061FD2E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0BA32F38 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[13:47:26.0569] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[13:47:26.0569] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
[13:47:27.0068] amai: tss_submit_job: HttpQueryInfo returned 200
[13:47:27.0286] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[13:47:27.0286] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
[13:47:27.0318] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
[13:47:27.0333] <DFU Device 0562C260>: production fused device
[13:47:27.0333] requested restore behavior: Erase
[13:47:27.0333] device software does not support nonce generation
[13:47:27.0349] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
[13:47:27.0349] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
[13:47:27.0364] <DFU Device 0562C260>: operation 0 progress 2
[13:47:27.0380] <DFU Device 0562C260>: operation 0 progress 5
[13:47:27.0396] <DFU Device 0562C260>: operation 0 progress 8
[13:47:27.0411] <DFU Device 0562C260>: operation 0 progress 10
[13:47:27.0427] <DFU Device 0562C260>: operation 0 progress 13
[13:47:27.0442] <DFU Device 0562C260>: operation 0 progress 16
[13:47:27.0458] <DFU Device 0562C260>: operation 0 progress 18
[13:47:27.0474] <DFU Device 0562C260>: operation 0 progress 21
[13:47:27.0489] <DFU Device 0562C260>: operation 0 progress 24
[13:47:27.0505] <DFU Device 0562C260>: operation 0 progress 26
[13:47:27.0520] <DFU Device 0562C260>: operation 0 progress 29
[13:47:27.0536] <DFU Device 0562C260>: operation 0 progress 32
[13:47:27.0552] <DFU Device 0562C260>: operation 0 progress 34
[13:47:27.0567] <DFU Device 0562C260>: operation 0 progress 37
[13:47:27.0583] <DFU Device 0562C260>: operation 0 progress 40
[13:47:27.0598] <DFU Device 0562C260>: operation 0 progress 42
[13:47:27.0614] <DFU Device 0562C260>: operation 0 progress 45
[13:47:27.0630] <DFU Device 0562C260>: operation 0 progress 48
[13:47:27.0645] <DFU Device 0562C260>: operation 0 progress 50
[13:47:27.0661] <DFU Device 0562C260>: operation 0 progress 53
[13:47:27.0676] <DFU Device 0562C260>: operation 0 progress 56
[13:47:27.0692] <DFU Device 0562C260>: operation 0 progress 59
[13:47:27.0708] <DFU Device 0562C260>: operation 0 progress 61
[13:47:27.0723] <DFU Device 0562C260>: operation 0 progress 64
[13:47:27.0739] <DFU Device 0562C260>: operation 0 progress 67
[13:47:27.0754] <DFU Device 0562C260>: operation 0 progress 69
[13:47:27.0770] <DFU Device 0562C260>: operation 0 progress 72
[13:47:27.0786] <DFU Device 0562C260>: operation 0 progress 75
[13:47:27.0801] <DFU Device 0562C260>: operation 0 progress 77
[13:47:27.0817] <DFU Device 0562C260>: operation 0 progress 80
[13:47:27.0832] <DFU Device 0562C260>: operation 0 progress 83
[13:47:27.0848] <DFU Device 0562C260>: operation 0 progress 85
[13:47:27.0864] <DFU Device 0562C260>: operation 0 progress 88
[13:47:27.0879] <DFU Device 0562C260>: operation 0 progress 91
[13:47:27.0895] <DFU Device 0562C260>: operation 0 progress 93
[13:47:27.0910] <DFU Device 0562C260>: operation 0 progress 96
[13:47:27.0926] <DFU Device 0562C260>: operation 0 progress 99
[13:47:27.0926] WinDFU::UploadData: EOF, cbRead: 554
[13:47:27.0942] <DFU Device 0562C260>: operation 0 progress 100
[13:47:27.0942] WinDFU::UploadData: ZLP
[13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
[13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
[13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
[13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
[13:47:30.0968] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
[13:47:30.0968] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
[13:47:30.0968] WinDFU::ResetDevice: resetting...
[13:47:31.0046] WinDFU::FinalizeDfuUpdate: success
[13:47:31.0046] <DFU Device 0562C260>: DFU succeeded
[13:47:31.0046] Finished DFU Restore Phase: Successful
[13:47:31.0218] DFU mode device disconnected
[13:47:31.0218] Device removed when in state Restoring, moving device to transition state
[13:47:31.0218] Changing state from 'Restoring' to 'Transitioning'
[13:47:31.0218] Creating timer to monitor transition
[13:47:32.0175] DFU mode device connected
[13:47:32.0175] Transitioning device returned, continuing restore.
[13:47:32.0175] Canceling timer
[13:47:32.0175] Changing state from 'Transitioning' to 'Restoring'
[13:47:32.0175] AppleDevice::GetDeviceID: failed for iBoot
[13:47:32.0175] requested restore behavior: Erase
[13:47:32.0175] requested variant: Erase
[13:47:32.0175] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 061FDC70 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 061FE378 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0B9D5148 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0B9D5190 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0B9D51D8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0B9D5220 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0B9D5268 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 0B9D52B0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0B9D52F8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0B9D5340 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0B9D5388 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0B9D53D0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0B9D5418 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0B9D5460 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0B9D54A8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 06266350 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 06266398 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 062663E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 064698C8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[13:47:33.0064] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[13:47:33.0064] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
[13:47:33.0298] amai: tss_submit_job: HttpQueryInfo returned 200
[13:47:33.0501] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[13:47:33.0501] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
[13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "iBSS" has been previously personalized; skipping it
[13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "LLB" has been previously personalized; skipping it
[13:47:33.0517] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
[13:47:33.0532] <DFU Device 0BA2A9D8>: production fused device
[13:47:33.0532] requested restore behavior: Erase
[13:47:33.0532] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:33.0532] AppleDevice::GetDeviceID: failed for iBoot
[13:47:33.0532] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
[13:47:33.0532] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
[13:47:33.0564] <DFU Device 0BA2A9D8>: operation 0 progress 0
[13:47:33.0579] <DFU Device 0BA2A9D8>: operation 0 progress 1
[13:47:33.0595] <DFU Device 0BA2A9D8>: operation 0 progress 2
[13:47:33.0626] <DFU Device 0BA2A9D8>: operation 0 progress 3
[13:47:33.0642] <DFU Device 0BA2A9D8>: operation 0 progress 4
[13:47:33.0657] <DFU Device 0BA2A9D8>: operation 0 progress 5
[13:47:33.0688] <DFU Device 0BA2A9D8>: operation 0 progress 6
[13:47:33.0704] <DFU Device 0BA2A9D8>: operation 0 progress 7
[13:47:33.0735] <DFU Device 0BA2A9D8>: operation 0 progress 8
[13:47:33.0751] <DFU Device 0BA2A9D8>: operation 0 progress 9
[13:47:33.0766] <DFU Device 0BA2A9D8>: operation 0 progress 10
[13:47:33.0798] <DFU Device 0BA2A9D8>: operation 0 progress 11
[13:47:33.0813] <DFU Device 0BA2A9D8>: operation 0 progress 12
[13:47:33.0844] <DFU Device 0BA2A9D8>: operation 0 progress 13
[13:47:33.0860] <DFU Device 0BA2A9D8>: operation 0 progress 14
[13:47:33.0876] <DFU Device 0BA2A9D8>: operation 0 progress 15
[13:47:33.0907] <DFU Device 0BA2A9D8>: operation 0 progress 16
[13:47:33.0922] <DFU Device 0BA2A9D8>: operation 0 progress 17
[13:47:33.0954] <DFU Device 0BA2A9D8>: operation 0 progress 18
[13:47:33.0969] <DFU Device 0BA2A9D8>: operation 0 progress 19
[13:47:33.0985] <DFU Device 0BA2A9D8>: operation 0 progress 20
[13:47:34.0016] <DFU Device 0BA2A9D8>: operation 0 progress 21
[13:47:34.0032] <DFU Device 0BA2A9D8>: operation 0 progress 22
[13:47:34.0063] <DFU Device 0BA2A9D8>: operation 0 progress 23
[13:47:34.0078] <DFU Device 0BA2A9D8>: operation 0 progress 24
[13:47:34.0094] <DFU Device 0BA2A9D8>: operation 0 progress 25
[13:47:34.0125] <DFU Device 0BA2A9D8>: operation 0 progress 26
[13:47:34.0141] <DFU Device 0BA2A9D8>: operation 0 progress 27
[13:47:34.0172] <DFU Device 0BA2A9D8>: operation 0 progress 28
[13:47:34.0188] <DFU Device 0BA2A9D8>: operation 0 progress 29
[13:47:34.0203] <DFU Device 0BA2A9D8>: operation 0 progress 30
[13:47:34.0234] <DFU Device 0BA2A9D8>: operation 0 progress 31
[13:47:34.0250] <DFU Device 0BA2A9D8>: operation 0 progress 32
[13:47:34.0281] <DFU Device 0BA2A9D8>: operation 0 progress 33
[13:47:34.0297] <DFU Device 0BA2A9D8>: operation 0 progress 34
[13:47:34.0312] <DFU Device 0BA2A9D8>: operation 0 progress 35
[13:47:34.0344] <DFU Device 0BA2A9D8>: operation 0 progress 36
[13:47:34.0359] <DFU Device 0BA2A9D8>: operation 0 progress 37
[13:47:34.0390] <DFU Device 0BA2A9D8>: operation 0 progress 38
[13:47:34.0406] <DFU Device 0BA2A9D8>: operation 0 progress 39
[13:47:34.0422] <DFU Device 0BA2A9D8>: operation 0 progress 40
[13:47:34.0453] <DFU Device 0BA2A9D8>: operation 0 progress 41
[13:47:34.0468] <DFU Device 0BA2A9D8>: operation 0 progress 42
[13:47:34.0500] <DFU Device 0BA2A9D8>: operation 0 progress 43
[13:47:34.0515] <DFU Device 0BA2A9D8>: operation 0 progress 44
[13:47:34.0531] <DFU Device 0BA2A9D8>: operation 0 progress 45
[13:47:34.0562] <DFU Device 0BA2A9D8>: operation 0 progress 46
[13:47:34.0578] <DFU Device 0BA2A9D8>: operation 0 progress 47
[13:47:34.0593] <DFU Device 0BA2A9D8>: operation 0 progress 48
[13:47:34.0624] <DFU Device 0BA2A9D8>: operation 0 progress 49
[13:47:34.0640] <DFU Device 0BA2A9D8>: operation 0 progress 50
[13:47:34.0671] <DFU Device 0BA2A9D8>: operation 0 progress 51
[13:47:34.0687] <DFU Device 0BA2A9D8>: operation 0 progress 52
[13:47:34.0702] <DFU Device 0BA2A9D8>: operation 0 progress 53
[13:47:34.0734] <DFU Device 0BA2A9D8>: operation 0 progress 54
[13:47:34.0749] <DFU Device 0BA2A9D8>: operation 0 progress 55
[13:47:34.0780] <DFU Device 0BA2A9D8>: operation 0 progress 56
[13:47:34.0796] <DFU Device 0BA2A9D8>: operation 0 progress 57
[13:47:34.0812] <DFU Device 0BA2A9D8>: operation 0 progress 58
[13:47:34.0843] <DFU Device 0BA2A9D8>: operation 0 progress 59
[13:47:34.0858] <DFU Device 0BA2A9D8>: operation 0 progress 60
[13:47:34.0890] <DFU Device 0BA2A9D8>: operation 0 progress 61
[13:47:34.0905] <DFU Device 0BA2A9D8>: operation 0 progress 62
[13:47:34.0921] <DFU Device 0BA2A9D8>: operation 0 progress 63
[13:47:34.0952] <DFU Device 0BA2A9D8>: operation 0 progress 64
[13:47:34.0968] <DFU Device 0BA2A9D8>: operation 0 progress 65
[13:47:34.0999] <DFU Device 0BA2A9D8>: operation 0 progress 66
[13:47:35.0014] <DFU Device 0BA2A9D8>: operation 0 progress 67
[13:47:35.0030] <DFU Device 0BA2A9D8>: operation 0 progress 68
[13:47:35.0061] <DFU Device 0BA2A9D8>: operation 0 progress 69
[13:47:35.0077] <DFU Device 0BA2A9D8>: operation 0 progress 70
[13:47:35.0108] <DFU Device 0BA2A9D8>: operation 0 progress 71
[13:47:35.0124] <DFU Device 0BA2A9D8>: operation 0 progress 72
[13:47:35.0139] <DFU Device 0BA2A9D8>: operation 0 progress 73
[13:47:35.0170] <DFU Device 0BA2A9D8>: operation 0 progress 74
[13:47:35.0186] <DFU Device 0BA2A9D8>: operation 0 progress 75
[13:47:35.0217] <DFU Device 0BA2A9D8>: operation 0 progress 76
[13:47:35.0233] <DFU Device 0BA2A9D8>: operation 0 progress 77
[13:47:35.0248] <DFU Device 0BA2A9D8>: operation 0 progress 78
[13:47:35.0280] <DFU Device 0BA2A9D8>: operation 0 progress 79
[13:47:35.0295] <DFU Device 0BA2A9D8>: operation 0 progress 80
[13:47:35.0326] <DFU Device 0BA2A9D8>: operation 0 progress 81
[13:47:35.0342] <DFU Device 0BA2A9D8>: operation 0 progress 82
[13:47:35.0358] <DFU Device 0BA2A9D8>: operation 0 progress 83
[13:47:35.0389] <DFU Device 0BA2A9D8>: operation 0 progress 84
[13:47:35.0404] <DFU Device 0BA2A9D8>: operation 0 progress 85
[13:47:35.0436] <DFU Device 0BA2A9D8>: operation 0 progress 86
[13:47:35.0451] <DFU Device 0BA2A9D8>: operation 0 progress 87
[13:47:35.0467] <DFU Device 0BA2A9D8>: operation 0 progress 88
[13:47:35.0498] <DFU Device 0BA2A9D8>: operation 0 progress 89
[13:47:35.0514] <DFU Device 0BA2A9D8>: operation 0 progress 90
[13:47:35.0529] <DFU Device 0BA2A9D8>: operation 0 progress 91
[13:47:35.0560] <DFU Device 0BA2A9D8>: operation 0 progress 92
[13:47:35.0576] <DFU Device 0BA2A9D8>: operation 0 progress 93
[13:47:35.0607] <DFU Device 0BA2A9D8>: operation 0 progress 94
[13:47:35.0623] <DFU Device 0BA2A9D8>: operation 0 progress 95
[13:47:35.0638] <DFU Device 0BA2A9D8>: operation 0 progress 96
[13:47:35.0670] <DFU Device 0BA2A9D8>: operation 0 progress 97
[13:47:35.0685] <DFU Device 0BA2A9D8>: operation 0 progress 98
[13:47:35.0716] <DFU Device 0BA2A9D8>: operation 0 progress 99
[13:47:35.0716] WinDFU::UploadData: EOF, cbRead: 1116
[13:47:35.0732] <DFU Device 0BA2A9D8>: operation 0 progress 100
[13:47:35.0732] WinDFU::UploadData: ZLP
[13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
[13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
[13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
[13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
[13:47:38.0758] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
[13:47:38.0758] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
[13:47:38.0758] WinDFU::ResetDevice: resetting...
[13:47:38.0836] WinDFU::FinalizeDfuUpdate: success
[13:47:38.0836] <DFU Device 0BA2A9D8>: DFU succeeded
[13:47:38.0836] Finished DFU Restore Phase: Successful
[13:47:39.0039] DFU mode device disconnected
[13:47:39.0039] Device removed when in state Restoring, moving device to transition state
[13:47:39.0039] Changing state from 'Restoring' to 'Transitioning'
[13:47:39.0039] Creating timer to monitor transition
[13:47:41.0674] Recovery mode device connected
[13:47:41.0674] Transitioning device returned, continuing restore.
[13:47:41.0674] Canceling timer
[13:47:41.0674] Changing state from 'Transitioning' to 'Restoring'
[13:47:41.0684] requested restore behavior: Erase
[13:47:41.0684] requested variant: Erase
[13:47:41.0684] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[13:47:42.0528] iBoot build-version = iBoot-1940.10.58
[13:47:42.0528] iBoot build-style = RELEASE
[13:47:42.0528] requested restore behavior: Erase
[13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0528] requested restore behavior: Erase
[13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0543] unable to open device_map.txt: No such file or directory
[13:47:42.0543] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:42.0543] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:42.0543] AMDeviceIoControl: GetOverlappedResult failed
[13:47:42.0543] AMDeviceIoControl: pipe stall
[13:47:42.0543] USBControlTransfer: error 31, usbd status c0000004
[13:47:42.0543] command device request for 'getenv radio-error' failed: 2008
[13:47:42.0543] radio-error not set
[13:47:42.0543] unable to open device_map.txt: No such file or directory
[13:47:42.0543] <Recovery Mode Device 0555AEB8>: production fused device
[13:47:42.0543] requested restore behavior: Erase
[13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0543] requested restore behavior: Erase
[13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0543] interface has 1 endpoints, file pipe = 1
[13:47:42.0543]
[13:47:42.0543] <Recovery Mode Device 0555AEB8>: operation 4 progress -1
[13:47:42.0606] unable to open device_map.txt: No such file or directory
[13:47:42.0606] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:42.0606] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:42.0606] requested restore behavior: Erase
[13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0606] requested restore behavior: Erase
[13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0606] <Recovery Mode Device 0555AEB8>: operation 42 progress -1
[13:47:42.0606] requested restore behavior: Erase
[13:47:42.0621] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:43.0651] <Recovery Mode Device 0555AEB8>: operation 5 progress -1
[13:47:43.0994] unable to open device_map.txt: No such file or directory
[13:47:43.0994] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:43.0994] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:43.0994] AMDeviceIoControl: GetOverlappedResult failed
[13:47:43.0994] AMDeviceIoControl: pipe stall
[13:47:43.0994] USBControlTransfer: error 31, usbd status c0000004
[13:47:43.0994] command device request for 'getenv ramdisk-delay' failed: 2008
[13:47:45.0616] <Recovery Mode Device 0555AEB8>: operation 6 progress -1
[13:47:46.0630] <Recovery Mode Device 0555AEB8>: operation 7 progress -1
[13:47:46.0942] <Recovery Mode Device 0555AEB8>: operation 8 progress -1
[13:47:46.0958] unable to open device_map.txt: No such file or directory
[13:47:46.0958] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:46.0958] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:46.0958] <Recovery Mode Device 0555AEB8>: operation 9 progress -1
[13:47:46.0958] <Recovery Mode Device 0555AEB8>: Recovery mode succeeded
[13:47:46.0958] Finished Recovery Restore Phase: Successful
[13:47:48.0409] Recovery mode device disconnected
[13:47:48.0409] Device removed when in state Restoring, moving device to transition state
[13:47:48.0409] Changing state from 'Restoring' to 'Transitioning'
[13:47:48.0409] Creating timer to monitor transition
[13:47:52.0895] RestoreOS mode device connected
[13:47:52.0895] Transitioning device returned, continuing restore.
[13:47:52.0905] Canceling timer
[13:47:52.0905] Changing state from 'Transitioning' to 'Restoring'
[13:47:52.0905] <Restore Device 05577800>: operation 44 progress -1
[13:47:52.0905] requested restore behavior: Erase
[13:47:52.0905] requested variant: Erase
[13:47:52.0905] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[13:47:53.0792] requested restore behavior: Erase
[13:47:53.0792] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:53.0792] device did not return saved USB log
[13:47:53.0792] device did not return saved panic log
[13:47:53.0792] previous restore failed with exit status 0x100
[13:47:53.0792] connected to service com.apple.mobile.restored
[13:47:53.0808] using protocol version 13
[13:47:53.0808] unable to open device_map.txt: No such file or directory
[13:47:53.0808] board config = n42ap
[13:47:53.0808] no value returned for BootArgs
[13:47:53.0824] _copyDeviceProperty() failed for restore bootargs
[13:47:53.0824] no value returned for MarketingPartNumber
[13:47:53.0824] _copyDeviceProperty() failed for mpn
[13:47:53.0824] requested restore behavior: Erase
[13:47:53.0824] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:53.0839] value query for 'HardwareModel' returned 'N42AP'
[13:47:53.0839] <Restore Device 05577800>: operation 28 progress -1
[13:48:10.0360] previous restore failed: re:INF@ 145] created partition 1 as 'Effaceable'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 2 as 'NVRAM'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 3 as 'Firmware'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 4 as 'Filesystem'
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 4
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 5 as 'System Config'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 6 as 'Diagnostic Data'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 7 as 'Bad Block Table'
[13:48:10.0360] com.apple.AppleFSCompressionTypeZlib load succeeded
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 7
[13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart1 at 0x32600000(0x82cc6000)
[13:48:10.0360] L2TP domain init
[13:48:10.0360] L2TP domain init complete
[13:48:10.0360] PPTP domain init
[13:48:10.0360] AppleSwissPPNFTL started with IOFlashStoragePartition provider
[13:48:10.0360] [NAND] _FindFlashMediaAndKeepout:601 physical nand block offset 1
[13:48:10.0360] AppleNANDFTL registered[NAND] start:356 this 0x85e41800 PROVIDER=0x85f2a400 flashMedia=0x85f2a400
[13:48:10.0360] [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
[13:48:10.0360] [NAND] WMR_Start:174 FIL_Init  [OK]
[13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart3 at 0x32800000(0xde3b4000)
[13:48:10.0360] virtual bool AppleDisplayPipe::start_hardware(IOService *), auto-detect chip
[13:48:10.0360] [NAND] WMR_Open:371 VFL_Open    [OK]
[13:48:10.0360] Scaler 0 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 0 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] void AppleDisplayPipe::setupVideoDownscalingLimits(): minimum-frequency property not found, using getClockFrequency(0) instead.
[13:48:10.0360] Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] AppleMultitouchN1SPI: successfully started
[13:48:10.0360] AppleH4CamIn::start - back camera expected
[13:48:10.0360] AppleH4CamIn::start - front camera expected
[13:48:10.0360] AppleH4CamIn::power_off_hardware
[13:48:10.0360] AppleAP3DSH::probe found device with ID: 0x3f
[13:48:10.0360] AppleAP3DSH::handleStart _calibrationMatrix [64699 -1892 -370] [-1570 65035 -244] [849 465 63854]
[13:48:10.0360] AppleAP3DSH::handleStart _calibrationOffsets [518853 -714699 -1661621]
[13:48:10.0360] AppleAP3DSH::handleStart - No calibration inverse matrix or the data is invalid, Compute locally
[13:48:10.0360] AppleAP3DSH::handleStart _calibrationInverseMatrix [66427 1929 393] [1599 66087 261] [-895 -507 67257]
[13:48:10.0360] AppleAP3DSH::handleStart _odr400HzSampleInterval = 2440
[13:48:10.0360] AppleH4CamIn::setPowerStateGated: 0
[13:48:10.0360] AppleCS35L19Amp: could not allocate control 395
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
[13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 0
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType Detached
[13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[13:48:10.0360] AppleMultitouchN1SPI: detected HBPP. driver will be kept alive
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
[13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[13:48:10.0360] display-scale = 2
[13:48:10.0360] display-rotation = 0
[13:48:10.0360] found applelogo at /usr/share/progressui/[email protected]
[13:48:10.0360] found display: primary
[13:48:10.0360] display: 640 x 1136
[13:48:10.0360] found PTP interface
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP
[13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: iPod USB Interface
[13:48:10.0360] AppleSynopsysOTGDevice          Interface: USBAudioControl
[13:48:10.0360] AppleSynopsysOTGDevice          Interface: USBAudioStreaming
[13:48:10.0360] AppleSynopsysOTGDevice          Interface: IapOverUsbHid
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
[13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
[13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBMux
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
[13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
[13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBMux
[13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBEthernet
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
[13:48:10.0360] IOAccessoryPortUSB::start
[13:48:10.0360] virtual bool AppleUSBDeviceMux::start(IOService *) build: Jun 11 2014 20:11:28
[13:48:10.0360] init_waste
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
[13:48:10.0360] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
[13:48:10.0360] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
[13:48:10.0360] AppleBCMWLANCore::init(): IO80211-46 Jun 11 2014 20:10:03
[13:48:10.0360] [NAND] WMR_Open:420 FTL_Open    [OK]
[13:48:10.0360] [NAND] _publishServices:642 FTL capabilities: 0x00000001
[13:48:10.0360] [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks - count: 23 max_count: 23
[13:48:10.0360] [NAND] _fetchBorrowedList:881 number of borrowed blocks 16
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 0
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 1
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 2
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 3
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 5
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 6
[13:48:10.0360] 000828.945879 wlan.N[0] AppleBCMWLANCore::start(): Starting with MAC Address: <<<mac address>>>
[13:48:10.0360] 000828.946182 wlan.N[1] AppleBCMWLANCore::setPowerStateGated():   powerState 1, fStateFlags 0x20, dev 0xc476b000 (this 1, provider 0)
[13:48:10.0360] 000828.946197 wlan.N[2] AppleBCMWLANCore::setPowerStateGated():  Received power state change before driver has initialized, ignoring
[13:48:10.0360] IO80211Peer::addPhyStatistics Phy stats started for addr <<<mac address>>>
[13:48:10.0360] IO80211Peer::addPhyStatistics Tx Completion stats started for addr <<<mac address>>>
[13:48:10.0360] IO80211PeerManager::initWithInterface cant add monitoring timer
[13:48:10.0360] Started logging for intf
[13:48:10.0360] IO80211PeerManager::initWithInterface: inited peer manager
[13:48:10.0360] IO80211Interface::init peerManager=0x87cb8800
[13:48:10.0360] start:156
[13:48:10.0360] start:156
[13:48:10.0360] AppleARMBacklight::start: No AAP function
[13:48:10.0360] [effaceable:INIT] found current generation, 90, in group 1
[13:48:10.0360] [effaceable:INIT] started
[13:48:10.0360] [effaceable:INIT] started
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49152 62078<-usb->4608
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49153 62078<-usb->4864
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888adec8 established 62078<-lo0->49154 62078<-usb->5120
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49155 62078<-usb->5376
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888adec8
[13:48:10.0360] recv(13, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade18
[13:48:10.0360] recv(14, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49156 62078<-usb->5632
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49157 62078<-usb->5888
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49158 62078<-usb->6144
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49159 62078<-usb->6400
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49160 62078<-usb->6656
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49161 62078<-usb->6912
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49162 62078<-usb->7168
[13:48:10.0360] unrecognized key 'BootArgs' in value query
[13:48:10.0360] failed to handle value query for key 'BootArgs', sending back empty response
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49163 62078<-usb->7424
[13:48:10.0360] unrecognized key 'MarketingPartNumber' in value query
[13:48:10.0360] failed to handle value query for key 'MarketingPartNumber', sending back empty response
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49164 62078<-usb->7680
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] client protocol version 13
[13:48:10.0360] *** UUID 4B2AC217-7071-EC47-8945-EB5E2188BE49 ***
[13:48:10.0360] Restore options:
[13:48:10.0360]  UUID                           => <CFString 0x19315c0 [0x2f3ad0]>{contents = "4B2AC217-7071-EC47-8945-EB5E2188BE49"}
[13:48:10.0360]  MinimumSystemPartition         => <CFNumber 0x1931510 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
[13:48:10.0360]  SystemPartitionSize            => <CFNumber 0x1930f50 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
[13:48:10.0360]  SystemPartitionPadding         => <CFBasicHash 0x192f3c0 [0x2f3ad0]>{type = mutable dict, count = 5,
[13:48:10.0360] entries =>
[13:48:10.0360]  2 : <CFString 0x1931540 [0x2f3ad0]>{contents = "128"} = <CFNumber 0x1931570 [0x2f3ad0]>{value = +1280, type = kCFNumberSInt64Type}
[13:48:10.0360]  3 : <CFString 0x1930f20 [0x2f3ad0]>{contents = "16"} = <CFNumber 0x192f3f0 [0x2f3ad0]>{value = +160, type = kCFNumberSInt64Type}
[13:48:10.0360]  4 : <CFString 0x192ede0 [0x2f3ad0]>{contents = "32"} = <CFNumber 0x1931250 [0x2f3ad0]>{value = +320, type = kCFNumberSInt64Type}
[13:48:10.0360]  5 : <CFString 0x1931960 [0x2f3ad0]>{contents = "8"} = <CFNumber 0x192ed50 [0x2f3ad0]>{value = +80, type = kCFNumberSInt64Type}
[13:48:10.0360]  8 : <CFString 0x1931180 [0x2f3ad0]>{contents = "64"} = <CFNumber 0x1931950 [0x2f3ad0]>{value = +640, type = kCFNumberSInt64Type}
[13:48:10.0360] }
[13:48:10.0360]
[13:48:10.0360] entering load_sep_os
[13:48:10.0360] device has no sep
[13:48:10.0360] entering partition_nand_device
[13:48:10.0360] device supports boot-from-NAND
[13:48:10.0360] nand device is already partitioned
[13:48:10.0360] entering wait_for_storage_device
[13:48:10.0360] Searching for NAND service
[13:48:10.0360] Found NAND service: IOFlashStoragePartition
[13:48:10.0360] NAND initialized. Waiting for devnode.
[13:48:10.0360] entering clear_remap_variable
[13:48:10.0360] executing /usr/sbin/nvram
[13:48:10.0360] entering format_effaceable_storage
[13:48:10.0360] effaceable storage is formatted, clearing it
[13:48:10.0360] effaceable storaged cleared
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] AppleD1972PMUPowerSource: limiting USB input current to 390 mA (measured 462 mA)
[13:48:10.0360] ** /dev/rdisk0s1s1
[13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360]    The volume name is Sochi11D257.N42OS
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume Sochi11D257.N42OS appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
[13:48:10.0360] entering check_for_restore_log
[13:48:10.0360] found restore log (size = 28347)
[13:48:10.0360] entering unmount_filesystems
[13:48:10.0360] error unmounting '/mnt2': Invalid argument
[13:48:10.0360] entering clean_NAND
[13:48:10.0360] NAND format complete
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0 system= data=
[13:48:10.0360] entering format_storage_for_LwVM
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] unexpected partition 'LwVM' - skipping
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system= data=
[13:48:10.0360] entering create_filesystem_partitions
[13:48:10.0360] User specified system partition size, skipping firmware extras size.
[13:48:10.0360] system partition padding size is: 167772160 bytes
[13:48:10.0360] unable to open : No such file or directory
[13:48:10.0360] creating 2 partitions
[13:48:10.0360] creating encrypted data partition
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] wipe entire partition: 1 (old = 0 new = 1820)
[13:48:10.0360] block size for /dev/disk0s1s1: 4096
[13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
[13:48:10.0360] block size for /dev/disk0s1s2: 4096
[13:48:10.0360] /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
[13:48:10.0360] executing /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
[13:48:10.0360] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] entering mount_filesystems
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] ** /dev/rdisk0s1s1
[13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360]    The volume name is System
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume System appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] ** /dev/rdisk0s1s2
[13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360]    The volume name is Data
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume Data appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s2 mounted on /mnt2
[13:48:10.0360] entering resize_system_partition_to_options
[13:48:10.0360] User specified system partition size, skipping firmware extras size.
[13:48:10.0360] Found SystemPartitionPadding value of 167772160 bytes
[13:48:10.0360] Erasing system partition prior to resize operation.
[13:48:10.0360] block size for /dev/disk0s1s1: 4096
[13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] ** /dev/rdisk0s1s1
[13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360]    The volume name is System
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume System appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
[13:48:10.0360] Trying to resize system partition to 1908408320 bytes aka 1820 MB
[13:48:10.0360] entering adjust_partition_preflight
[13:48:10.0360] partition:0 requiredSize=465920
[13:48:10.0360] no change in size
[13:48:10.0360] Successfully resized the system partition
[13:48:10.0360] entering maximize_data_partition
[13:48:10.0360] entering adjust_partition_preflight
[13:48:10.0360] partition:1 requiredSize=<<<<<IMEI>>>>>>6
[13:48:10.0360] maximizing data partition to 13946060799 bytes
[13:48:10.0360] entering adjust_partition_preflight
[13:48:10.0360] partition:1 requiredSize=3404800
[13:48:10.0360] no change in size
[13:48:10.0360] Successfully resized data partition to consume free blocks
[13:48:10.0360] The system partition now has a total HFS+ capacity of 1820 MB
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] entering unmount_filesystems
[13:48:10.0360] entering ramrod_ticket_update
[13:48:10.0360] looking up root ticket hash
[13:48:10.0360] device tree ticket-hash: <CFData 0x1930040 [0x2f3ad0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[13:48:10.0360] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
[13:48:10.0360] received valid ticket (2741 bytes)
[13:48:10.0360] entering restore_images
[13:48:10.0360] Successfully marked device node /dev/rdisk0s1s1 as static data
[13:48:10.0360] executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
[13:48:10.0360] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
[13:48:10.0360] void AppleUSBDeviceM

Hello gamavranje,
Thanks for using Apple Support Communities.
The icons you're seeing on your iPhone indicate it is in recovery mode.  Please plug your iPhone into your computer, and restore it with iTunes.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Take care,
Alex H.

Similar Messages

  • HT204291 Help, I updated last night and have lost the airplay? There is nothing for it in the control centre, any suggestions please.

    Hi everyone
    I've updated to IOS 7 and lost the Airplay, there is nothing in the control centre as the trouble shooting pages suggest how it should look, any suggestions please.  Thanks

    Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears

  • I inherited an iphone 4 about 1 month ago.  Updated to ios 7 and lost the ability to send MMS to phones other than iphones.   HELP !

    I inherited an iphone 4 from my daughter 1 month ago.  I updated, upon prompt on phone, to ios 7 and lost the ability to send MMS to any phone other than an iphone.    
    I have been to Apple, AA & T, and our no contract carrier and NO ONE knows what happened or how to help.
    HELP !!!
    lfdhays10

    By the way, this is not a jail broken phone.  It is an AT & T phone using a no conract service that uses AT & T towers.
    lfdhays10

  • IPhone 4 GSM Updated to iOS 6.0 and the Maps isn't showing the 3D button? Is it not available in Canada? How do I enable it? Pleas help!

    I just updated my iPhone 4 to 6.0, and when I launch maps, the 3D button and compass arrow are there in the corner, but when the App actually loads, it disappears... Is it not available in Canada? Is there any way I can enable it???

    I would wager the 3GS and 4 don't have the CPU to handle the rendering they were showing on the keynote.  Must be one of the reasons 6 won't support the original iPad either, which has the same CPU as the 4.

  • Updated Iphone 6 to 8.1.1 and have lost the ability to connect to wi-fi.  What can I do to fix this problem?

    After downloading 8.1.1, can no longer connect to wi-fi.  The phone sees the wi-fi, but, does not connect.  I have tried rebooting the phone, tried turning the wi-fi off and back on.  What other steps can I take to fix this?

    UGgh i have iphone 4s and its the same problem, been looking for a solution all day but nothing worked. Sorry i cant help but i think a solutionwill come up soon because it is it keeps popping up more frequently. There is one thing if you can find reset network settings in the settings that might work but it didnt fr me

  • After updating my IPad I have lost the icon for the App Store how do I get it back?

    Can't find my App Store icon after new update?

    If you can't find it and it hasn't been restricted as suggested by stedman1, You can reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
    Settings>General>Reset>Reset Home Screen Layout.

  • TS3694 my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?

    my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    worth looking at for the future to understand backing up etc

  • My computer backed up my iPhone before I updated my IOS, now itunes crashes everytime I restore!  I need my Contact information!

    My computer backed up my iPhone before I updated my IOS, now itunes crashes everytime I restore!  How can I get my contact information back?

    When does iTunes crash?
    When you connect to the computer?
    When you click on the restore button?
    At sometime during the restore?
    Does it crash or does just iTunes freeze?
    Maybe here:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues

  • How im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

    how im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

    What "auto shutdown problem" are you talking about?

  • I have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??

    i have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??

    touch me wrote:
    it says ICCID: unknown
    Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
    Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • I am not able to send messages to multiple person from my iphone 5s after updating to ios 8.1.2. It shows message not delievered

    I am not able to send messages to multiple person from my iphone 5s after updating to ios 8.1.2. It shows message not delievered

    Hi waqaskhan91,
    Thank you for visiting Apple Support Communities.
    If you're not able to send text or iMessages to certain contacts after updating your iPhone, start with the troubleshooting tips in this article:
    iOS: Troubleshooting Messages - Apple Support
    If you only see this behavior with a few contacts, you may want to try these steps first:
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
    Best Regards,
    Jeremy

  • IPhone 4s updated with IOS 8. Not the calendar will not show a full list of dates. Instead it shows the whole month with the list of the day selected. I want to have my full list back. So much easier to scroll thru when making appointments.

    iPhone 4s just updated with IOS 8. Now my calendar does not offer the full list of items by day on the screen. Instead I see the month and below the month are the appointments in a list for the selected day only. I would like the option to have the full list available as it is much easier to scroll thru the list when making appointments.

    Hello memormor,
    Thank you for visiting Apple Support Communities.
    To see the full scrollable list of events, start from the day view (tap on a day), not the month view, then click .
    Calendar at a glance - iPhone
    View a list of events. In month view, tap to see a day’s events. In day view, tap .
    Take care,
    Nubz

  • Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty

    Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??

    Hello HaithamOkeely,
    We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

  • Iphone 4S, recently updated to IOS 7.0.2 When I try to sync with my Mac window pops up saying iphone requires itunes version 11.1 or later. Disconnected, switched both off and back on, no change. Any ideas?

    I have an iphone 4S, recently updated to IOS 7.0.2. Tried syncing with my Mac but window pops up saying iphone requires itunes version 11.1 or later. Tried updateing itunes but it says it's up to date. Tried disconnecting, switching both phone and mac off and back on, no change. Any ideas?

    bristles wrote:
    ... the version I'm on is 10.5.8.
    If possible... you need to Upgrade to Snow Leopard = OS X 10.6.x  (which will Run iTunes Version 11)
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
    Be sure to make a Backup of your Current System Before Upgrading...
    NOTE:
    You should also consider more RAM... Get the Maximum you can for your Mac...
    It is important to get the Correct and Matching RAM
    See Here  >  OWC RAM  >  http://www.macsales.com
    The above site also has videos on how to Install RAM should you need it...

  • HT5429 I am not able to get any directions on my maps i am using iphone 4s and updated to ios 6.1.3 and whenever i try to find a route it always says directions could not be found can anyone help in fixing it

    I am not able to get any directions on my maps i am using iphone 4s and updated to ios 6.1.3 and whenever i try to find a route it always says directions could not be found can anyone help in fixing it

    Maps: Turn-by-Turn Navigation
    Argentina Australia Austria Belgium Brunei Bulgaria Canada Croatia Czech Republic Denmark Egypt Estonia Finland France Germany Greece Hong Kong Hungary Ireland Israel Italy Japan Latvia Liechtenstein Lithuania Luxembourg Macau Malaysia Malta Mexico Morocco Netherlands New Zealand Norway Poland Portugal Romania Russia San Marino Singapore Slovakia Slovenia South Africa South Korea Spain Sweden Switzerland Taiwan Thailand Turkey UK Ukraine USA
    Back to Top

Maybe you are looking for

  • ITunes adds duplicate songs when importing but not making copies in the iTunes Media folder?

    This is an irregular problem and does not happen at every new import, but every now & again iTunes is creating duplicate files entries for the same song when I import my music folder. Now I know many people post a similar problem, but before we start

  • Grid in Photoshop CS6.

    I seem to have lost the ability to view a grid in Photoshop. It appears as <grid> in the list. What should I do to rectify this? Thanks.

  • Dreamweaver, XSLT question

    I'd like to duplicate a node. The duplicate has to be placed as the first child of the root. The original node has to remain intact. Is this possible with XSLT in Dreamweaver?

  • Problem in eliminating duplicates

    hi EXPERT i want to take off the duplicates eg Emp Name BALAJI BALAJI Bala nela anbu MUMBAI R R Amman Amman i have used 1. SORT it_final. DELETE ADJACENT DUPLICATES FROM it_final. and 2. select distict but i dont find any change it appears with dupli

  • VisuFoxPro and VMware

    Greetings All,    We are currently hosting a Visual FoxPro 9.0 SP2 application on a Windows 2003 server. I have attempted to virtualize the server using VMware's P2V converter. The conversion went flawlessly with no errors and the virtual server star