TS3694 My iPhone 3gs got an update today ios 6.1.6 but when i press install update my phone shutdown and shows connect to itunes display, after i connect to itunes it shows unknown erro (306).....whats is happening and what should i do ?
My iPhone 3gs got an update today ios 6.1.6 but when i press install update my phone shutdown and shows connect to itunes display, after i connect to itunes it shows unknown erro (306).....whats is happening and what should i do ?
Take a look at this post: https://discussions.apple.com/thread/5036467?tstart=0
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences(PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, seeiTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
For more information on other security software, see iTunes: Troubleshooting security software issues.
Similar Messages
-
I am on ios 6.1.2 but when i try to update it doesn't show ios 6.1.3
I am on ios 6.1.2 but when i try to update it doesn't show ios 6.1.3
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also see here...
How to update your iPhone, iPad, or iPod touch -
MY ipad3 running iOS 8.1 does not upgrade to 8.3. I have downloaded 8.3 but when I press install now and choose agree, nothing happens for hours. Any help?.
You are in the wrong discussion forum, but ok:
-- You say it is running 8.1 now, but your profile says 6.1.3, plse update your profile.
-- Did you download in Mac iTunes? or directly in the iPhone?
if in Mac iTunes: check the following Finder location: Startupdisk->Homefolder (yourname)->Library->iTunes->iPadSoftwareUpdates : the downloaded file should be there and be complete the extension should be .ipsw, if it is not there or not complete you should download again.
if in the iPhone: notice that the install phase and verifying phase and restarting phase need (good) internet connection. -
My problem is that, in update, it says, I have (2) updates on my iPad 4. But when I go to update, there is nothing to update in the App Store. Plz Help
The update server is down; try this temporary workaround
App Store>Purchased>Select "All"
Note: Look out for apps that have the word "Update"
http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg -
When I launch my iTune 10.6.1 , it suggests an update to 10.6.3 . But when I click to update , it fails to detect any latest version . Anyone can help ? Thanks .
or download the standalone installer here:
http://www.apple.com/itunes/download/
Regards. -
some one help me
If you are trying to update to IOS 7, it appears Apple's download servers are 'overwhelmed' today. I couldn't download the newest iTunes update or IOS 7 and there are a lot of discussions today about not being able to download.
-
And i need help so If theres anyone out there that could give me a little info and help on how to fix it, please do
Um, this makes no sense. The binary is already on the device, it came directly from Apple so I'm not sure where the hold up is. I guess it depends on what is exactly "Verifying update ..." is. I always believed it was about checking to ensure the binary was proper; not sure why it has to call back to Apple servers in that case.
It's super annoying. Apple really needs to fix this problem. Especially when one has to leave and needs to take their devices with them...
Last time this happened, all I had to do was connect to iTunes and the issue cleared out immediately and updated. -
I update the info in the pc (itunes). Everytime I the app store ask for my password, the username is incorrect. If I go to the account information, there in the app store, the username is correct. Any advice? Thanks.
You cannot change your Apple ID. You can get a new one if you want, but all of your Apps and media are linked to yoru old Apple ID. And no, Apple won't transfer your old ID purchases to yoru new ID.
-
When I try to update or install apps on my iphone 3gs, it tells me my apple id is disabled, but when I log in on my pc it lets me. Any ideas what to do?
Try signing out, then back in on your phone: Settings>Store>Apple ID, tap the ID shown, sign out, sign back in. If that doesn't work, reset your password here: https://iforgot.apple.com.
-
After downloading updates in C5, camera rawstopped working. I am trying to download DNG CONVERTOR but when I press 'Download' it just times out. Is Photoshop having problems as I have tried for three days now.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings using itunes it took 4 hours and completed but my phone still wont come on..what can i do to fix the problem? please help #
In trying to include what information all that I could I should have specified I DON'T KNOW THAT IT WAS DEFINATELY JAILBROKEN when I took it to the apple store they told me there's no way for them to tell if it was jail broken or not. I'm only going by what ppl have told me COULD HAVE BEEN DONE TO THE PHONE. With that said the only thing I know for sure is that the apple tech at the Genius Bar told me that someone took control of my root menu in February & I've had no control of my phone since. I asked him how to regain control & how he knew his exact words were "oh that is out of our scope of capabilities here at this level & you would need an apple engineer to fix it". I said ok then how do I get an apple eng then? He laughed & said you can't!!!! To which I was furious I came home & called apple requesting to speak w/the fraud dept to file a report they said we don't have a fraud dept!! So after a 45 mn phone call again I left w/no answers.
@TJBUSMC1973-
I DON'T HAVE THOUSANDS OF DOLLARS TO SPEND HIRING AN ATTORNEY & Although I appreciate your suggestion I fail to how an attorney would be able to facilitate in any way since there's no suspect. I cannot prove that it's him doing it so I certainly can't pursue legal action w/no proof & no money. :'((
Again I thank you for your advice but I don't think that will help.
I was looking more for a TECHNICAL way to avoid this happening w/a new phone should I buy one or trying to get them out of my phone now! Such as installing some kind of software protection?? Someway to clear out the entire phone (other than factory reset which was done 10 x's w/no success, etc. if this person got in then there HAS TO BE A WAY OF GETTING HIM OUT, right???? -
i cant update my iphone 3gs to a more newer ios? it says here error! and the phone flashes some connect to itunes.. an if i connct nothing happens.. help me.. the ipgone wont open . and work pls help me thank you!
Hello AlexCornejo,
Thanks for using Apple Support Communities.
The screen you're seeing on your iPhone indicates it is in recovery mode. Now since the device is not appearing in iTunes on your PC, first follow the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
After following those steps, you should be able to restore your iPhone.
Take care,
Alex H. -
My speakers from my iPhone 4S is not working I'm clicking on the buttons on the side nd the volume is not even showing getting louder or lower but when I plug in my ear phones I can hear it juss happen out of no where what sould I do ?
Your iPhone charging port may have a minor short, causing iPhone to falsely sense it is connected to a dock turning off its speaker. Clean iPhone charging port with a clean dry toothbrush.
-
TS3694 My phone can work it says unknown erroe occurred 1015 i dont know what to do ?
My phone can work it says unknown erroe occurred 1015 i dont know what to do ?
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
from this article http://support.apple.com/kb/TS3694#error1015 -
Hello. I have an iphone 3gs 8gb factory unlocked. Currently its running on ios 5.0.1 and I am trying to update it ios 5.1.1 but its not updating. The itunes downloads the ios 5.1.1and gives back unknown error(3194). Please help.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Maybe you are looking for
-
BAPI_ACC_DOCUMENT_POST for field trading partner (bseg-VBUND)
Hi, I am uploading journal entries in SAP by using this BAPI "BAPI_ACC_DOCUMENT_POST". Here program works fine now i want to give trading partner (bseg-VBUND) in line item but i cant find appropriate field in this BAPI for trading partner so that i c
-
Jpegs appear stretched in Timeline
I'm bringing jpegs into FCP for a slideshow and they appear stretched out as though in HD. The sequence setting is set for 720 x 480. How would I make them appear as they normally should? Thanks.
-
Hi All, I am unable to view Reports in the SCCM CM 2012 console and the URL. I have installed the Reporting service in DB server and later also ran the Reporting service configuration on DB server. After that I am able to browse to the URL but do not
-
How to deactivate CO validation rule?
Hi I want to deactivate PARTICULAR STEP in validation temporarily.I have seen many discussions in forums like 1.Go OB28 and deactivate by changing to ZERO-----(here complete validation gets deactivated) 2.Remove from the steps in Tcode GGB0 (entire
-
Error when i run any page with any view object
jdevloper 11.1.2 version 64 i create menu from task flow and template and its ok . after create model from database. when i run any page not have any view object its successful and run but when i drag any table object from data control to the pag