TS3694 What is error code 1667?

What is error code 1667?

The TS3694 article you attached explains:
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
UPDATE - Sorry, 1667 is not included there. Sorry.
Message was edited by: sberman

Similar Messages

TS3694 what is error code 40?

What does error code 40 mean ? What do I have to do to fix my phone? it will not restore and I keep getting error code 40

Everything we know about it is in the knowledge base article you were reading when you posted the question.
http://support.apple.com/kb/TS3694#error40
Basically, it says that your antivirus or firewall is preventing iTunes from updating your phone. Try disabling them. It may also be necessary to delete the possibly corrupt .ipsw file. That's described under Advanced Steps in TS3694.

TS3694 what is error code 1015 trying to restore but keeps coming up with this code

what is error code 1015 trying to restore phone keeps saying in recovery but keeps coming up with this error code help please

Are you trying to downgrade your iPhone?
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
(from iTunes: Specific update-and-restore error messages and advanced troubleshooting)
If not, try to move or delete the IPSW file and let iTunes download it again.
Rename, move, or delete the iOS software file (.ipsw)
iTunes uses "ipsw" files to restore your device. If those files are unusable, then try deleting them, renaming them, or moving the file to a different directory. This will cause iTunes to download a new copy of the IPSW. When a restore issue is specific to a user, it is likely due to an unusable .ipsw file. If removing the .ipsw file does not resolve a user-specific restore issue, then the issue is caused by other user-specific security software settings or iTunes preferences. Creating a new user will also cause new .ipsw restore files to be downloaded in the new user. You can find the ".ipsw" files in these locations:
Mac OS X
iPhone
~/Library/iTunes/iPhone Software Updates
iPad
~/Library/iTunes/iPad Software Updates
iPod touch
~/Library/iTunes/iPod Software Updates
Note: The tilde "~" represents your Home directory.
Windows XP
iPhone
C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
iPad
C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPad Software Updates
iPod touch
C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPod Software Updates
Note: To quickly access the Application Data folder, click Start, and then choose Run. Type %appdata% and click OK.
Windows 7 and Vista
iPhone
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
iPad
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPad Software Updates
iPod touch
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates
Note: To quickly access the AppData folder, click Start, and then in the search bar type %appdata% and press the Return key.

TS3694 what is error code 1015? i can not restore my iphone for this code. thanks

im having a issue with my sons iphone. it wont restore! can anyone help in this matter? thank you

Your phone is jailbroken. That's what the error code means. It's likely you'll never get it working again.
Further discussion of jailbroken phones is against the Terms of Use of this forum that YOU agreed to by signing up to post here.
You'll have to go elsewhere for help, if there's even any help to be had.

TS3694 what is error code 3004

i cannot recover or restore my ipad it gives me a error code 3004.

Just what it says in the article you attached:
Errors 3000-3999 (3004, 3013, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes can't contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software isn't interfering with ports 80 or 443 or with the server gs.apple.com.
Follow these steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (go to "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you're using a proxy, try again without using a proxy.
Test restoring while connected to a known-good network.

TS3694 what is error cod 80000084 can't restore i phone

I am trying to restore my i phone so we can use it as a i pod since my kiddo doesn't need this great of technology. I went to a guyto fix it and now my i phone wont sync it says I can't restore it and it wont find a wi fi network.

Hello there, FRBETS.
It seems that in all the list of errors on the Knowledge Base you were referred to us from, you may have missed your error and help to resolve:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Specifically this applies to your error:
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

TS3694 what is error code 14

phone is stuck in recovery mode i connect iphone 4s to desktop by usb open itunes and hit run recovery mode and it does then stops and say error 14 cannot not complete recovery mode.

http://support.apple.com/kb/ts3694
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.

TS3694 What is error code OxE8000065

I plugged my Iphone 5 into an HP photo printer via the USB cable. The printer did not recognize the phone. I unplugged it and plugged it into my computer. Now the computer and Itunes say "Itunes could connect this iphone. Unkown error occured OxE8000065. What does this mean and how can I fix it?

Hi dixifromtx,
Thanks for visiting Apple Support Communities.
You may find the steps in these articles helpful for troubleshooting the connection between iTunes and your iPhone:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Best,
Jeremy

HT201210 For my ipad update I got error code 1667. What should I do now ?

For my ipad update I got error code 1667. What should I do now ?

Check to see if you have enough free space to apply the update.

TS3694 what is error 1 it does not have it on this page with error codes.

I have had a error on my i pnone 4 because it needs re storing so what does error code 1 mean.

You can do a search (error 1) on the top right of the forum. Look for the thread with the green check mark. this has been brought up numerous time in numerous threads.

HT201210 what is error code (1)? it is not listed but this is the error i get trying to restore my 3gs.

what is error code (1)? it is not listed but this is the error i get trying to restore

Take a look here for Apple's suggestions on that error:
http://support.apple.com/kb/TS3694#error1
Regards.

What is error code 3014? And How to fix it?

What is error code 3014? And How to fix it?

Error code 3014 is covered on this page : http://support.apple.com/kb/TS3694 - click on '3014' in the list of errors at the top of the page and it should take you to some troubleshooting for it ('network connection or download errors')

What is error code 1004

What is error code 1004

Error 1004 and 1013: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to default on Windows. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service."
From this: http://support.apple.com/kb/TS3694#error1004

What does (error code -600) mean?

What does (error code -600) mean?
I received this code in a pop up window while trying to open iTunes from my Apps folder.

procNotFound
= -600, /*no eligible process with specified descriptor*/
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Any change?

Does anyone know what this error code means?My itunes will not open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll."

Does anyone know what this error code means?My itunes will not even open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll." Please let me know if your know anything! It is greatly apprecitated!

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

TS3694 What is error code 1667?

Similar Messages

Maybe you are looking for