TS3999 I cannot see my contacts or my calander in my icloud. It is turned on on the phone  but it does not appear on the pc... what's going on?

help!!!!

When normally powering the phone, there would not be a loading bar, you would just see the Apple logo. You can try a reset of the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.
You can take the phone to Apple, by making an appointment at the Genius Bar to have the hardware checked. Apple handles warranty and post-warranty issues, not Verizon. Have Apple look at the hardware to see if there are any problems.

Similar Messages

  • I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start M

    I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start Menu, Task Manager, System Tray, or anywhere else. When I try to open a file, the site tells me Flash player is not installed. I have even downloaded it to a separate folder and ran the install with IE shut down completely. And Shockwave in ENABLED but in 32 bit .I have been trying to get this to work for about 3 weeks now.  HELP!!!

    Flash Player is a browser add-on, not an executable program.
    If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
    Note that the download is the player, not an installer, so you will need to make the file association manually.

  • HT1296 How do I back up the calendar and contacts from my iPhone5 to my new macbook pro(10.8.3)? I have backed up the phone, but it does not transfer the calendar or the contacts. If I check them in the sync area and the back up the phone again...

    How do I back up the calendar and contacts from my iPhone5 to my new macbook pro(10.8.3)? I have backed up the phone, but it does not transfer the calendar or the contacts. If I check them in the sync area and then back up the phone again will they transfer or be erased? I am a bit gun shy since my previous macbook pro committed suicide and I lost a ton of info there.

    Copy everything from your backup copy of your old computer.

  • I cannot get my Acrobat Pro to open. I already uninstalled it and re installed it. But still does not open. The program pops to ask for permission to open the program, but it never actually opens.  I  trouble shoot it and it says incompatible application.

    I cannot get my Acrobat Pro to open. I already uninstalled it and re installed it. But still does not open. The program pops to ask for permission to open the program, but it never actually opens.  I  trouble shoot it and it says incompatible application.

    It sounds like an issue of trying to run XI on VISTA. That combination does not work. Info on both the Acrobat full version (including sub-version) and OS would help. It might also be an issue of running 11.0.0 on a system that needs the updates to work.

  • My content library is grayed out in the top menu and does not appear in the sidebar. Cannot use.

    I am using iMovie 10.0.3 on OS 10.9.3. Many features are grayed out. My whole content library being the most important. I can't even do any transitions.

    My iMovie's (10.0.5) "content library" is greyed out as well in the menu bar.  It does not even show up in the side bar.  The content library is still there in iMovie 9.  I recently updated Mac OS to Mavericks and iMovie updated itself.  I am using an iMac (post 2007).  I have tried a few things but to no avail yet.  I closed iMovie 10, started iMovie 9, let it re-establish stuff, closed iMovie 9, found iMovieUpdated (not exact wording) files in Finder under User:Movies folder, deleted them, then restarted iMovie 10.  I was hoping it would somehow reset itself, but no.  I then trashed iMovie 10, logged out and back in, and updated back to iMovie 10 through the App Store: Purchases.  No luck.  I fixed permissions - no luck.  Also, I am attempting to access the "content library" while in a project (not an event), since that is where I would expect it to show up and be useful.

  • HT1222 I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!!!!!!

    I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!

    Paldeng, thanks for the suggestion.  I've done all that.  I can connect to the server, but apparently they are not recognizing my ID and password.  I can use the server program if I don't go through Mail (using the same ID and password).  My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do.  His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume).  We can receive email in Mail, we just cannot send.
    I contacted my service provider, and we went over my connections.  They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired.  Apple swears it is not their problem, it is the provider, so here I sit.  My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely.  The thing is, we had not messed with any of those settings, so what changed?  I just did not want to bother my son again, as he has many other demands on his time.
    Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard.  I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update.  Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections?

  • In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

    In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
    Thanks

    Hi,
    I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
    Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
    As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
    Best wishes
    John M
    As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.

    I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.

    This category is for iPod shuffle.  Is that the type of iPod you have, because your description of the problem does not sound like it's about a shuffle?  If it's not a shuffle, what is the iPod model...?
    There is music there and I can play it connected to laptop.
    Are you doing the playing using the iPod, or are you playing the music using iTunes on the laptop?
    All mucis icons read "No music" and this is not correct
    Do these icons with "No music" appear on the laptop's screen, or on the iPod's screen

  • I bought and downloaded a few song on iTunes. Now I see that some of the songs were not completely downloaded and stops a few seconds into the song. I went back to the album but it does not give me an option to re-download. What do I do so that I can down

    I bought and downloaded a few song on iTunes. Now I see that some of the songs were not completely downloaded and stops a few seconds into the song. I went back to the album but it does not give me an option to re-download. What do I do so that I can down

    Just found the answer - if you have the sam problem look here for the answer:
    https://discussions.apple.com/thread/5769424?tstart=0

  • I cannot hook to my wifi it shows it but will not allow me to hook to it. I have a password but it does not ask for the password just tells me to dismiss

    My I phone 4 will not hook to my wifi. All it says is cannot connect to netgear then dismiss. I have a pssword but it does not ask for it Thanks

    Well, what exactly isn't working? Do you get any errors? What system are you on? As a start, check this:
    Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual
    Mylenium

  • My device does not appear in the iTunes window.  Instead a separate window opens so I cannot sync

    My device does not appear in the iTunes window.  Instead a separate window opens so I cannot sync my device.  I have tried with both my iPad, my iPod and my iPhone.  In each case a separate window opens showing that it is fully connected to the computer, but it does not open in iTunes. 
    I have followed previous instructions to stop then start the device manager.  I have even uninstalled then reinstalled iTunes, but no luck.  Can someone help??

    Hello Linda Lev,
    It sounds like Windows recognizes that your devices are conneted, but iTunes does not. I recommend the troubleshooting from the article named:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Ipod restore failed  can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

    ipod restore failed  can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

    To get iTunes to see your iPod try:
    - Placing the iPod in recovery mode.  See:
    iPhone and iPod touch: Unable to update or restore
    - Placing it in recovery DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Sometimes this program will get th iPod in recovery mode:
    RecBoot iPod-1.0.2-Mac-Jaxov.zip - File Shared from Box.net - Free Online File Storage

  • Steady green light on A1084. Airport Utility 5.6 says set up is complete.   Airport Express base station does not appear in the menu bar, so I cannot select it.  Is there a fix?

    Steady green light on A1084. Mac OS X 10.7.5. IMac. Verizon DSL Actiontec GT704-WGB modem. Airport Utility 5.6 says set up is complete.   Airport Express base station does not appear in the menu bar, so I cannot select it and send a signal to airport express to play airtunes through my stereo amplifier.  Is there a fix?

    I plugged a model A1034 Airport Extreme Base Station into the Verizon DSL Actiontec GT704-WGB modem with an ethernet cable and now the AirPlay icon appears in the Itunes window immediately to the right of the volume control and I can select it and play Airtunes wirelessly through the A1038 Airport Express Base Station in another room connected to a stereo amplifier by a Monster mini-to-RCA left/right audio cable running from the output jack on the A1034 Airport Express Base Station into the CD jacks on the amp.  The problem is that I have to select the Apple Network Airport Express Base Station as my network in order to select the Airport Express Base Station when I click the AirPlay icon, which means I have no Internet signal to the Imac. If I select the Airport Extreme Base Station or the Verzion modem as my network, then I have an Internet signal to the Imac, but the Airport Express Base Station is grayed out when I click on the AirPlay icon, so I cannot select the Airport Express Base Station and send tunes to the Airport Express.  It would be nice to play Airtunes while simultaneously accessing the Internet.  I don't understand your question about what program I am using for which I require AirPlay.  I am not learned about computers in general, and even less so about Macs than PCs.  I thought the program I was running was Itunes, and there was no separate program to run to use AirPlay for the purpose of sending a signal from the Itunes on the Imac to the A1084 Airport Express base station in a another room, and then out as described above to the stereo amplifier to listen to Itunes music remotely in the other room, without any kind of cable, wire, etc., connecting the Imac to the stereo amplifier.  I would guess that the most common use for the A1084 is to play Itunes through a stereo in another room without the need to run wires from the computer to the stereo.  I realize it would be easy simply to run a very long mini-to-RCA left/right audio cable across the floor connecting the Imac to the amp without the need to use AirTunes, Airplay or any kind of AirPort, but it would be both unsightly and a tripping hazard.

  • In contacts the country field of the address does not appear in the print pre view or or in the printed label. any suggestions  why or who to correct ?

    In contacts on my new i Mac the country field does not show in the label print pre view or the printed label.
    Any suggestion of why this is happening?

    I have found a solution - no bug. See this link
    Address book

  • HT1766 I'm trying to update my iphone 4.  I've put everything from the pho          ne into itunes for backup.  I can see that the updated OS is on the phone, but only for a second until the phone asks me again how I want to restore my stuff.  three times

    I'm updating my iphone 4.  I can see that the update has been installed on the phone, but only for a second before it asks me to restore/back up from iCloud or iTunes, which I've done THREE times.  It has to be something really simple...please HELP

    Restore as a NEW device to test. If this solves it, that means there is some corruption in your backup file, or maybe it's one of your apps causing the trouble. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

Maybe you are looking for

  • Help with this div - can I overlap divs?

    Hello there, I used the search function to find an answer to this, but got nothing concrete so thought I should make this thread My problem is shown in the screenshots below. I created a div id for the banner, a div id for the button "home". There is

  • Table in edit Mode with infinite lines ?

    Hi, We are designing an application, where as one of the requirement is to have a table with infinite open lines for user input. By Default table should be in EDIT mode and user should be able to enter values without the need to click on a line to in

  • Language change makes me unable to log on my Macbook!

    Hi guys, So yesterday I changed my language from English to Vietnamese. My computer went on sleep. When I tried to log on, it didn't show up the dots(for the password field). I'm thinking the language change has messed up the keyboards! Could anyone

  • SolMan 7 SR3 installation : SMD could not start

    Hello all, It's the third time I'm installing a SolMan 7 SR3 (aka SolMan 4 SR4 previously) on a windows 2k3 SP2 server and for the third time, I'm getting the following error on the SMDAgent : [Thr 11636] Wed Sep 24 16:34:30 2008 [Thr 11636] JHVM_Reg

  • Unable to launch HANA Studio

    Hi All, HANA studio stopped to launch suddenly. I even tried uninstalling and cleaning up the registry. Even after fresh install I am not able to run it. When I checked trace log I could see some eclipse related errors Which I have attached here. Pas