TS4036 icloud back up issue please help!
on my iphone4, settings, icloud - i am being prompted to enter terms and conditions before being allowed to do anything within icloud. when i click the link i get an error stating i am unable to connect to the server. how can i resolve this?
I know this is tough but you may have to Restore as New...
As to Losing your Photos... the iPhone is not a Storage Device...
If you Regularly Sync your iPhone... your Photos, Contacts, Etc.. will be on your computer...
So after a Restore as New they can be Re-synced to the phone...
You are probably aware of all this and it doesn’t help your particular situation...
But... if you don’t have a Backup you can use I don’t know what else to suggest...
maybe someone else has a better suggestion...
Similar Messages
-
IPhone 4 Back Up Issue - Please Help
Help Please!
Upon connecting my iPhone 4 to iTunes today, I was notified of a new software update for the phone. Whenever I receive these notifications, I always back my iPhone up before downloading the software update; so as to create a restore point in the event that it should ever fail!!! I followed this process earlier today and during the installation process, I received a failure message, so attempted to synch the phone again. When it has completed the sync it seems to have restored the phone to where it got to during the initial installation process, so I currently appear to have lost all of my photos / text messages / personal settings etc etc. When I try to use the backup feature, I can see that the time it wants to restore my phone to is the one where I know the phone is only partially back upped, so what I am trying to establish, is how I can restore the phone to the version that I backed up prior to downloading the software update today?. I know that one is what I need to see!
I believe I have found this is the path C:\Users\xxxxxxxx\AppData\Roaming\Apple Computer\MobileSync\Backup, howver, whenever I go in to itunes it can not see the back up that I want it to back up to and I have tried changing the name etc... I have copied teh file before I did this, so I know I have a clean version of this.
Can anyone help?
MarkI know this is tough but you may have to Restore as New...
As to Losing your Photos... the iPhone is not a Storage Device...
If you Regularly Sync your iPhone... your Photos, Contacts, Etc.. will be on your computer...
So after a Restore as New they can be Re-synced to the phone...
You are probably aware of all this and it doesn’t help your particular situation...
But... if you don’t have a Backup you can use I don’t know what else to suggest...
maybe someone else has a better suggestion... -
In my icloud account on my iphone I have three ios devices. How do I manage the backup of my old phone ? I dont want to detete that backup completetly, just manage that phone back up ? Please help!
It will be backed up on your computer and can later be restored to an iOS device using iTunes, if desired. Of course, if your hard drive crashes you'll lose it if it isn't backed up somewhere else. If you want to included it in your computer backup, it will be located at one of the following locations:
Mac OS X: ~/Library/Application Support/MobileSync/Backup
Windows XP: %AppData%\Apple Computer\MobileSync\Backup
Windows Vista: %AppData%\Roaming\Apple Computer\MobileSync\Backup
Windows 7: %AppData%\Roaming\Apple Computer\MobileSync\Backup -
I was accidentally deleted pictures last week in my ipad mini. How can I restore them without any back up (icloud, itunes, etc)? Please help me.. Thank you
iPad Photo Recovery: How to Recover Deleted Photos
http://www.iskysoft.com/iphone-data-recovery-mac/ipad-photo-recovery.html
How to Restore Lost or Deleted Files from iPad
http://www.iphone-ipad-recovery.com/recover-ipad-mini-files.html
How to Recover Deleted Files from iPad
http://www.kvisoft.com/tutorials/recover-deleted-files-from-ipad.html
iSkysoft Free iPhone Data Recovery
http://www.iskysoft.com/iphone-data-recovery/
Recover iPhone/iPad/iPod touch lost data, Free.
Free recover iPhone/iPad/iPod touch lost contacts, photos, videos, notes, call logs and more
Recover data directly from iPhone or from iTunes backup
Preview and recover lost iOS data with original quality
Wondershare Dr.Fone for iOS
http://www.wondershare.net/data-recovery/iphone-data-recovery.html?gclid=CJT7i9e 6gb4CFcvm7AodbUEAJQ
Recover contacts, messages, photos, videos, notes, call history, calendars, voicemail, voice memos, reminders, bookmarks and other documents.
Cheers, Tom -
Hi there,
Hope you can help me out here.
I've recently purchased a 15" i7 Macbook pro. The machine is but 3 weeks old &, of course, very well looked after.
A few days ago, the built-in trackpad started behaving eratically. Cursor moving by itself, not responding to touch, clicking and opening things involuntarily. Not good at all. Many users seem to have had this exact same issue.
These problems seemed to miraculously stop after a few re-boots and possibly a software update? I really couldn't tell you what resolved the problem.
Unfortunately I now have a totally different problem.
There is a thin, possibly 8 to 10mm horizontal strip across the centre of the trackpad that no longer responds to touch. If I move my finger from the botom of the trackpad upwards (or vice versa), the cursor will stop momentarily as it passes over the horizontal strip. The buttons are fine and the rest of the trackpad is fine. For the moment, I've increased the cursor acceleration so that I can at least navigate round the screen with a smaller area of the trackpad. USB magic mouse seems to work fine.
If anyone else has experienced this &/or found a solution for this issue, please help me out here. I have rifled through endless threads about MBP trackpad issues with little success & do not live close to an apple store/genius bar.
This is a 3 week old machine that cost me a small fortune. To be getting software/hardware issues so early on in it's lifespan is really rather worrying for the future.
Appreciate your help here.
JI'm not sure what caused this, but I extended my lunch break and drove the machine down to the Westfield apple store. I didn't have an appointment with the Genius Bar but I managed to persuade one of the staff to speak to a technician in the workshop. She came back into the store and told me that they had replacement trackpads and that , considering the machine was only 3 weeks old, the technicians kindly sandwiched the repair into their timetable at zero cost. 2 Hours later, I now have a perfectly functioning trackpad/machine.
I can't thank them enough.
My only gripe is that I couldn't speak to a technician to find out what the problem was, how they resolved it or what causes these issues for future reference. Understanding why these problems occur often helps to build your own framework of understanding. Most of the threads i've read about trackpad issues are largely unresolved with people only speculating the problem/solution.
The initial issue I had with the trackpad's erratic behaviour seemed to be a well known problem that many are associating with a trackpad firmware update. Unless by pure coincidence I had an immediate & major hardware fault after it, which is unlikely, my personal guess is that the two issues were related. -
Mid 2010 15" MBP i5 A1286 POWER ISSUE-PLEASE HELP-
The MBP works fine when mains connected but the only issue is every time I take the charger out it shuts down on me!!! So I have checked with a multitester & looks good the only thing i find hard to check for power is the battery itself as its hard to get a good connection, also I took to local Apple store & they checked with a new battery but said its still same issue so the guy disconnected nearly all the connecters off to check if they causing issue & he said now the battery is charging.
So they still have the laptop to do further tests etc, but I’m not sure what could be the problem hear as maybe there is some component which is bad so the battery’s not charging or what else could be the issue please help & advice as I’m really confused as if it was something to do with the logic board then surely it would not even charge even after checking with the multitester or like Apple genius done by disconnecting other components...
ANY HELP OR ADVICE WOULD BE HELPFULL,
THANKS GUYSTHANKS FOR THE HELP GUYS!!! BEEN AROUND 5 DAYS & NOT ONE PERON HAS HELPED...
BUT YEAH THANKS AGAIN...
WASTE OF TIME THIS IS... -
i'm trying to activate my gift card from last christmas but it keeps telling me to "try back later". Please help I hate to see $25.00 go down the drain.
Click here and request assistance.
(91679) -
Used to have ios 7 betaon my i phone and downgraded to ios 6 so i can upgrade to the official ios 7 but i lost my pc back ups. Please help me
First off, Apple doesn't support downgrading and it can potentially brick your phone. With that being said, if you created a back up in iOS 7 Beta and are trying to restore it to iOS6, you wont be able to. You need to upgrade first then restore from your backup. Don't be suprised if it doesn't work. There is a very real possibilty you may have to start from scratch.
-
I plugged my phone in my computer to download my pictures once it finished downloading I unpluged my phone and it went black and now won't turn back on. Please help me!!
Reset, hold both home and power buttons for about 10 seconds until the iPhone begins to start.
-
Hi. I tried switching my Apple ID email address to my new email address and I don't know how to switch it for iCloud and iTunes. Please help!! It seems like Apple thinks I have two separate accounts, when I just tried to simply change it!
Settings > Store > Sign Out.
Sign in with the correct ID. -
I accidentally dropped my firewall, or openned it. I checked it in system preferences and it is turned off but I can not find how to put it back up. PLEASE HELP! I obviously do not want to leave this open very long, if you get my drift.
Did you "click the lock to make changes"
-
Hello,
I have got a major prolen during transport.
I have GEMPLOYE1 Which is a time dependient master data. which has Attribute called 0COUNTRY_ID.
I have a custome attribute Called Actual PSGroup/Grade GPAYSCGR which has a compounpunding attribute 0COUNTRY_ID
Now when I am trying to transport PSGroup/Grade GPAYSCGR to QA that transport is failing , the log massage is
Characteristic GEMPLOYE1: Attribute GPAYSCGR compounded to 0COUNTRY_ID has a diff. time-dpdncy
If any one saw this issue, please help me to fix the same.
SamitHi Venu,
We can't add authorisation objects on Individual servers.We need to add authorisations on BWD ie Dev system and transport to BWI QUA system.This is the Process we need to follow as per our rule set.
So,As the problem mentioned above if i add some auth. objects on BWD DEV system and transport it to BWI QUA system,it is getting transported Successfully to BWI,but the auth.objects what i have added on BW DEV system is not found on BW QUA system.
What could be the problem for that,Is that the problem with transports like TP error or is it related with some tables of auth.objects...................
Could u please analyse the problem and tell me the solution for this..........
Thanks Much
Swapna.D -
Headerrenderer issue -Please help
Headerrenderer issue -Please help
hi
I have a datagrid and I am doing a custom sorting on the grid(by getting data from DB).
I achieve this by capturing the headerrelease event of datagrid .In thee venthandler I will query from DB and do event.preventdefault to prevent standard grid sorting.
Now I need to display my own custom ascending/descending arrows in the header.i have created an header renderer for this,
In the headerrenderer I am lsitening to the headerrelease event of datagrid and in the eventlistener, as per the sortfield, i am trying to make the sort arrow visible/invisible.
But somehow making the sort arrows visible/invisible is not working.The initial arrow works fine.it is shown the correct column(Name) as done in the init() method.
The eventhandler is invoked on clicking the column headers and all the alerts are shown.
Please see the headerrenderer code below and help me.(code is not complete only the relevant part is included)
<?xml version="1.0" encoding="utf-8"?><mx:HBox
xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" horizontalScrollPolicy="off" creationComplete="init()" implements="mx.controls.listClasses.IDropInListItemRenderer">
public function init():void{
headerLabel = dataField.label;
_dataGrid.addEventListener(DataGridEvent.HEADER_RELEASE,sortChanged,false);
if(_dataField.localeCompare('Name')==0)asc.visible=true; }
private function sortChanged(e:DataGridEvent){
var dg:DataGrid=e.currentTarget asDataGrid;
varcolumn:DataGridColumn = DataGridColumn(e.currentTarget.columns[e.columnIndex]);if(_dataField.localeCompare(e.dataField)==0)
if(asc.visible ||(!asc.visible&&!desc.visible))
Alert.show(
'in..');
asc.visible=false;
desc.visible=true;
else if(desc.visible){
asc.visible= true;
desc.visible=
false;
else{
asc.visible=
false;
desc.visible=
false;
]]>
</mx:Script>
<mx:Text text="{_headerLabel}" />
<mx:Image source="{ascIcon}" id='asc' visible="false">
<mx:Image source="{descIcon}" id='desc' visible="false"/>
</mx:HBox>I got the solution!!
i need to assign the headerrendereer to the columns dynamically inorder for this to work:
if anybody wants to know details of solution let me know -
I am unable to power off my iphone 4S. I have restored to factory settings and restored a back-up. Please help?
How are you trying to power it off?
And does a physical reset work? -
I had my Ipad up on a charger in my class and when I went to pick it back up the screen wouldn't turn on or do anything. Please help!!
While aimed at the iPhone, the sections under Power/Battery and Display in this support article will largely still apply and may be of help:
http://support.apple.com/kb/TS2802
If not, your iPad may have suffered a hardware failure, in which case you'll have to ask your school how to proceed.
Regards.
Maybe you are looking for
-
Problem in sending mail to inbox
I know this may be not a rite place to post the forum,but considering the replies for today in javamail ,i feel this is much better place to ask my problem. I coded a jsp which is used to send mail to providers like yahoo.com, hotmail etc.But problem
-
Oracle 10g on Windows Server 2008
Hi dears; OS: Windows Server 2008 R2 Standard (SP1) 64-bit Processor: Intel(R) Xeon(R) CPU E5645 @2.40GHz RAM: 8GB Oracle: Oracle 10g EE R2 (10.2.0.1.0) 32-bit As soon as the installation is OUI reports an error message and quits. Me
-
Unable to get into query designer in Dev
Hi BW Gurus, I am trying to get into query designer to do modifications to query in Dev server. But it is not allowing me to enter. It is displaying the following messages. BEx Transport request is not available or not suitable Choose another request
-
Hi Here is the scenario: Company is operating in current Version of 11.5.10 and currently in the process of upgradation. current structure : Multiple SOB,1 Legal Entity, OU and Multiple Inventory Org. Not in MRC Question : How does the transactions a
-
some one please answer this, every time i go into application loader it says, application failed codesign verification , please go into depth im a beginner, and only use gamesalad please respond as soon as possible!