TS4223 After changing the quality from HD to Standard the film doesn't play

I recently purchased The Dark Knight Rises on the Itunes store and soon after changed the quality of the film, but since doing so the film doesn't play and the artwork doesn't show up either but the extras work?, Does anyone know a solution for this?

How did you "change the quality?"

Similar Messages

  • Poor Printing quality after changing the catridges

    After changing the complete set of catridge print quality is very bad and only prining in Magenta & Grey color.
    regards,

    Please read this post then provide some details.  What printer model? What operating system?  Are there any error messages on the printer or computer screen?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

    Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

    That is priceless!!!  Thanks!  I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement.  Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
     My error msg is a little different from those previously stated, but close:  0xc18a0201.  Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100.  I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
    Oh heavens, I've had the c6280 a whopping 2 1/2 years!   I'm sure they want us poor slobs to have to buy a new one every year & a day!  To say nothing of the exorbitant prices for ink.  And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!!   Yeah, & what's with that not being able to print in BLACK if a color runs out????
    Anyway I really loved your essay!   It's a classic!  And says it all!  I hate that we have to be 'slaves' to the electronic 'wonders'!!!

  • Performance impact after changing the awr snapshot timing from 1 hour to 15 minuts.

    want to know performance impact after changing the AWR snapshot timing from 1 hour to 15 minutes.

    Hi,
    1) typically performance impact is negligible
    2) we have no way of knowing whether or system fits into the definition of "typical"
    3) the best way would be to do that on a test system and measure the impact
    4) I would be concerned more about SYSAUX growth than performance impact -- you need to make sure that you won't run out of space because of x4 more frequent snapshots
    Best regards,
      Nikolay

  • PDF in Word after changing the old PC

    How can I use the Adobe ExportPDF after changing the crashed and old PC

    Hi Zis,
    I'm sorry to hear that your computer crashed. That's never any fun. But, you shouldn't have any trouble accessing ExportPDF on your new system. Simply log in directly to cloud.acrobat.com/exportpdf. And, you if typically access the service from within Reader, you can download the free Adobe Reader from www.adobe.com/products/reader.html.
    Please let us know if you need additional assistance.
    Best,
    Sara

  • Interface getting failed after changing the Business system to that service

    Hello All,
    Our Env... is XI 3.0 and this is related to produciton env.
    Based on our client requirment to change the business system from client 871 to 100 for  one of the R3 system which is reciever type(rfc).
    After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in  the system.
    The steps which I have followed to change the Business system.
    1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
    2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
    3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
    Then i saved the changes and after that i have activated that interface.
    After that when i logged into CC monitoring and viewed that service channels and see the following errors:
    Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
    Error can not instantiate RfcPool caused by:
    com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
    Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
    Awaiting for your reply.
    Best Regards
    Rakesh Reddy

    Hello Nisar
    Thanks for the update,
    Let me say few points  about this particular problem:
    1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
    And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
    2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
    3>As mentioned by you , I have checked all the points mentioned
        i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
       ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
       iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
    I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
    It says that:
    RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
    Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
    If any information required , I can provide that.
    Best Regards
    Rakesh Reddy

  • MG3100 Cannon Printer, after changing the black prints misallied, and I have manually aligned??

    After changing the black ink cartridge on my Cannon MG3100, when I print word and from the internet the prints are all misaligned and I have manually done the print head alignment, print alignment values, cleaned the nozzles, cleaned elements and clenaed the roller. I even brought the ink cartridge back to Staples thinking it was defective, but it still will not print correctly, does anyone have any answers please? Thank you! DD

    Hi DD,
    If you have replaced the ink cartridge with a Canon genuine ink cartridge and have already performed both automatic and manual print head alignments as well as cleanings and are still experiencing alignment issues, the printer will require servicing.  Please Contact Us for your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Will the penfailure be solved after changing the cartridges? Installing printer again did not help.

    Hp Print Diagnnostic Utility detected 'Pen Failure' I tried reinstalling printer driver again, checked cartridges installation for correctness, cleaned contact points but they did not help. Will the penfailure be solved after changing the cartridges? Installing printer again did not help.
    Rajein

    Yes, I did try it.
    I completely uninstalled Firefox (including personal settings, bookmarks, add-ons etc.) and then I installed Firefox 24 from scratch. The outcome is unchanged. Namely, it installs it and then right when it is about to start for the very first time, it hangs. If I run the task manager I can see the process firefox32. It shows as if it is running. But in fact it is hanging doing nothing. It is almost as if the process is waiting for something to happen and that never occurs. Note that this should not have anything to do with, say, an incompatible add-on/plug in because I had them all removed. I also removed adobe flash prior to the installation and run the malware removal program too.

  • Films - Movies not Working or corrupted in iTunes after changing the  album artwork

    After trying to change the album artwork for some movies I own, I realized that such movie unplayable after such change and I cannot even revert what I have done. More, it seems like if you press on the "get info" section of the movie, you will notice that the artwork tab is gone and therefore, it’s like the movie is corrupted after changing the artwork. Any ideas? Has anyone encountered this before?

    Just checked and I have the updated itunes 8.0.1 with the poster frame problem.
    I finally found a fix for the movie album artwork problem.
    After realizing several movies had the same poster frame as one of the movies. I deleted the movie with the common poster frame which had been copied to other movies. The other poster frames changed on the other movies because they no longer had a reference to the file from which the poster frame was copied. So I copied the deleted movie back into itunes and then got to thinking that perhaps there is something else in common with the movies which displayed the same poster frame. I found that I had set the album field to the same title. So I changed the album field file by file, to something else. Then I set the poster frame after playing a few seconds of the video at a point where I wanted the frame set to the current frame. I got a film icon on the movie icon for a few seconds while it changed it. Sometimes I had to repeat selecting the different poster frames for each movie because it didn't take the first time... the second time I selected a different poster frame it was then set to the first poster frame that I selected. So now the movies which all had the same album "Aviation" now are all changed to "Flight Training" Of course, now the poster frames for those movies are all the same poster frame but at least they are correct for the type of movie.
    So if the album name is set to the same thing on several different movies they will all have the same poster frame.

  • Unable to discover machines through SCOM after changing the IP range

    Hello,
    Last week in my company IP range was changed to class A network from class C network,before changing the IP range everything was working fine.but after changing the IP i am unable to discover any client machine through agent discovery and unable to install
    agent over SCOM console
    any help will be thankfull
    regards,
    angs

    pinging is happening from both the servers from MS and client pc.
    but from ms am not getting the server name if using -a command in front of ip.
    nslookup is resolving.
    recently in my firm the primary dns server is changed,i checked in dns host entry.management server is
    registered perfectly
    regards,
    Nikhil

  • Language of Webdynpro after changing the Portal Language

    Hi All,
    Even after changing the portal language from for ex. English to French, the webdynpro is still displayed in English language.
    If this session (portal window) is closed and new portal session is started, then the webdynpro is displayed in French.
    Also please note that, for iviews built using Portal HTMLB (like JspDynPages), restarting the session is not necessary.
    Any answer/solution/pointers/SAP Notes supplied is greatly appreciated.
    Regards,
    Rajit

    Hi,
    Refer to SAP Note 947081 about Internationalization
    The Blog at /people/bertram.ganz/blog/2007/01/08/the-top-12-hottest-sap-notes-every-web-dynpro-java-developer-must-know talks about this Note.
    3rd point mentions about "Language change in the portal (through portal personalization) does not get immediately reflected in the Web Dynpro iViews?"
    Hope this solves your query.
    Kind Regards,
    Nitin

  • I do not know what I should phone is locked after changing the operating system

    I do not know what I should phone is locked after changing the operating system , have the original box , receipt lost, Apple said that it is necessary to support the receipt of the first as I can not find the receipt of the first purchase when I moved to another country . I now throw my iPhone ?

    It depends what you mean by 'locked' - it can mean locked by a passcode or linked only to one particular carrier (service provider). If the latter, see the post above; if it's a passcode issue:
    1. Assuming this was bought new and you have set up Activation Lock and forgotten the passcode, please see this page:
    http://www.lifehacker.co.uk/2011/10/24/youve-forgotten-iphones-passcode
    2. If you bought it second-hand (used) - though this is not the impression I get from you post - then only the previous owner can unlock it.

  • No effect after changing the message mapping

    Hi everybody,
    i'm using PI 7.1. After changing the attributes in my message mapping i can no see any effect in my result.
    Should it be a cache problem? Where can i delete the caches?
    regards,
    Sid

    Hi,
    I guess there can be two things.
    before going to the tcode sxi_cache...
    Please go to the IR, Click Environment, Cache Notification and then select author as your id.
    Now see if any are in red status. if so click on the change and click Repeat Cache Notification.
    Now press refresh.
    I guess this will resolve your problem

  • ORA-12545 error after changing the host name as IP address in Tnsnames.ora

    HI,
    I tried to connect PHP and oracle in Red Hat linux. I got error ORA-12545 after changing the host name as IPAddress in Tnsnames.ora file. In sqlnet.ora file also i have entry for tnsnames in Directory_Path. I struggled so much but i couldnt solve that. Please give me ur valuable suggestions....

    12545, 00000, "Connect failed because target host or object does not exist"
    // *Cause: The address specified is not valid, or the program being
    // connected to does not exist.
    // *Action: Ensure the ADDRESS parameters have been entered correctly; the
    // most likely incorrect parameter is the node name. Ensure that the
    // executable for the server exists (perhaps "oracle" is missing.)
    // If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
    // host name to a numeric IP address and try again.
    Seems you specified wrong IP address.

  • I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browers after quiting and restarting after changing the preferences

    I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browsers after quitting and restarting after changing the preferences

    How about extensions? Perhaps you have an adblock extension installed.
    Check Safari > Preferences > Extensions

Maybe you are looking for