TS5376 I get this message : unable to connect to the Itunes store (-3212) . I do have internet, did the unistall and reinstall steps in support. help!
I get an error message with code (-3212) . I do have internet access, using windows 7.
Hey qkslvr01,
Thanks for the question. I understand you are experiencing issues with connecting to the iTunes Store. The following articles may help to resolve your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 3000" through "3999"
Alerts with codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, or due to your Internet proxy settings. If you are using a proxy, try removing the proxy settings, or using a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.
Similar Messages
-
Every time you guys have an update there is a problem. Now I cn't connect! I am writing you using IE. Maybe I should just stop using Firefox! When trying to connect I get the following error message:Unable to connect
Firefox can't establish a connection to the server at www.google.com.
The site could be temporarily unavailable or too busy. Try again in a few
moments.
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.I just wanted to post that I found my I-pod cache file and deleted it and now synchronization works fine, so no need for anyone to post an answer to this. Thank you very much.
-
Help. Keep getting this message "Unable to connect to your incoming data ..
port. This will rersult in slow downloads, please check your firewall/router settings.
How do I change that so it works????How are you connected to the Internet? Is it something like as follows:
Cable modem > (Ethernet cable) > [Ethernet port] AirPort Express Base Station (AX) > (wireless) > MacBook? -
In the icloud settings, I am told I need to accept the terms and conditions to use icloud. However, when I click on "Terms and conditions", I get a message "unable to connect to server". This has been happening for a week now since I upgraded to iOS 7.06. There is no problem with my wifi or cellular connectivity, all other applications work perfectly. P.S.I have never used icloud before, but wish to do so now. How do I overcome this problem?
Have you turned the iPad off then back on? That often helps with problems.
-
using Bridge CS5 to exporting to flickr, but get error message "Unable to connect to Flickr, please check your internet connection and try again." please help?
I'm experiencing the same problem. Don't think I can help, but maybe I can offer an explanation. It looks as if Flickr has changed their API and Adobe will need to update the export plugin to comply to get it working again. I found this announcement on Flickr:
Flickr: The Help Forum: [Official Thread] Flickr API switching to https-only on June 27th, 2014! -
Getting error message 'unable to connect to server' when trying to access iCloud
Trying to access my iCloud account but keep getting error message 'unable to connect to server'. Need help please.
Welcome to the Apple Community.
Try the following.
Go to Settings > iCloud > Delete Account (This removes your data from your device, but not from your account, it will be added back later).
Restart the device.
Sign in again (Settings > iCloud, don't use the 'Create New Apple ID' button). -
Captivate 8: Getting this message "Unable to locate LMS's API, content may not play properly". Then I get a debug message of "44:Tue Feb 17 2015 : InIsLoaded, returning false". I also see a message in the preview pane when I view the .htm file in the project folder "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course." JavaScript is already enabled and I'm getting this in IE9 and Chrome 40....Has anyone else seen this?
The first part of your issue will be resolved if you load your course from an LMS. If you are not hosting your content on LMS, you can disable the reporting in your Quiz settings (Edit > Preferences > Quiz > Reporting).
Not sure about the Javascript related issues.
Sreekanth -
I have a iPhone 5C and a PC with Windows Vista.I did pair my phone thru Bluetooth but when I try to connect I get this message:"error establishing connection" What is the reason of this?
Go into Settings>Messages>Send and Receive and make sure that your phone number is checked and iMessage reads as activated. Remove the checkmark from the email address and make sure that only the phone number if checked. It should appear grayed out, but should still have a checkmark. If the phone number does not have a checkmark, then turn off iMessage, wait a few moments and then turn iMessage back on and make sure that it activates.
-
I keep getting this message “Unable to complete back up an error has occurred while creating back up folder” Why is this happening and is it time to purchase a new tim machine?
Check out the Apple Support Communities Time Machine expert Pondini's troubleshooting article on this exact topic. Hopefully, it will help.
-
I'm getting this message when I try to open iTunes: This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes. (-42037) What do I do?
Do a back up then try reinstalling.
You should always back up before do an update, upgrade, anything with the system in case something goes wrong. That way you still have a current copy of your data.
Try starting in safe mode, then running the update. This will disable most 3rd party sofwarelike anti virus and other things prople put on their machines that can cause problems.
Safe mode:
Power off, power on holding the shift key, continue to hold until you see the progress BAR then re;ase and allow to finish booting. Note this will take longer than a regular boot. Login and try running software update or use the link here to download. Use an ethernet connection if possible as it is much less prone to corruption than wireless.
http://support.apple.com/kb/DL1614
After download and install logout and restart normally. -
get this message when trying to authorize my computer. This apple id has not bee used with the itunes store.
Do i have to purchase something, before i can authorize my computer.Thank you in advance for any answers received.You cannot buy anything from the iTunes Store until you authorize the computer. Are you unable to authorize it? If so see the following:
Authorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7. -
The feature you are trying to use is on a network resource that is unabailable" Why am I getting this message when I try to updaate itunes or quicktime?
Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
After iTunes & Quicktime are uninstalled, try the update again. -
after installing maverick i get this message when i try to open itunes:Unmark the 32bits modus-but i have unmarked it several times!The new iTunes requires 64bits modus so what shall i do?
I upgraded my 2007 iMac (20") to Maverick. Should never have done this! Lost mail, lost my mail archive, lost numerous programs/applications, lost all my installed hardware, spend 4 days on getting it running again with the (supreme) help of Apple Care. However it should not have happened at all!
iMac Computers with less than 4Gb of internal memory (as explained by Apple Care), or less than (estimated) 150Gb of free disc-space should not upgrade! Simple as that and the App Store should warn you about that and not simply let you pick up your free copy of Maverick! -
I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.
I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.
-
I am getting this message: Service Apple Mobile Device failed to start, verify that you have sufficient privileges to start system services. How can I fix this?
Hello hurleygirl63,
Thank you for the details of the issue you are experiencing with iTunes. I recommend following the steps in the article below:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thank you for using Apple Support Communities.
Best,
Sheila M.
Maybe you are looking for
-
Ipod is on the desktop but not in iTunes
I connect my ipod to my computer and it shows up on the desktop, but I can't download music I've bought from iTunes to my ipod. What do I do?
-
Unable to access cisco asa via https or asdm!! connection interrupted message appears on the browser
Hey guys, I am unable to access cisco asa device using https and cannot lunch asdm, after recent power failure at our location. I have asdm installed on my machine and whenever i try to access the asdm, receive Error: unable to lunch device manager f
-
Reading and writing to and from a file to a form
Hi there I would like somebody to send me a code example, showing me how to reading records from a file to a form, and writing records to the same file from the same form. I know that I have to use sycronize, but I just have not been successful. I ca
-
AzCopy worked, suddenly stopped working, unable to connect to the remote server
AzCopy was working fine, I was transferring about 670 files to my Azure Files storage account on "https://blah.file.core.windows.net/myshare" (that's not the real account), then it stopped after about 400 files. Now it continually gives the error "Er
-
Hi Friends, I have installed Oracle Apex 3.1 successfully. When i click application Builder i am gettin the following error. I hope i have installed full version. Is there a way to chek whether i did only runtime only? application=4000 workspace=10 E