TSCOPY:keyfigure copy one planning book to other book

Hi,
When i copying the keyfigure values from one planning book to othe Planning book through /SAPAPO/TSCOPY, the keyfigure is copying all the other keyfogure values also in the other planning book., I need to copy only one keyfigure row values to other planning book keyfigure row. Not all key figure values.
I hope to get solution form APO DP experts.,
Advance thanks for provide solution of my problem
Regards,
R K Sadasivam

Hi Sadasivam :
I think you had placed a check mark in the box of Propose Key Figures While executing the TSCOPY transaction due to which it is triggering copy of all Keyfigures.
Plz do not place this checkmark and manually chose the Key figure which you want to copy in source and target tabs.

Similar Messages

How to copy data from one planning area to other planning area

Hi ,
I need to copy data from one planning area to other planning area, the MPOS for two planning areas are differant and here my scenario is one planning area having extra key figures.
First i need to release forecast data to CIP planning area and then, i load the data from infocube to MPS planning area and copy the data from CIP planning area. here both MPS and CIP planning areas having different MPOS .
Please help me in this. Please give me the stepls i need to follow.
Thanks in advance.
Regards,
Chandu

Hi,
You can use the transaction /sapapo/tscopy.
In this you can configure your source plng area and destination plng area. You also have an option to map your KF. There is no problem if the MPOS are different as long as you are able to map the characteristics between the 2 MPOS.
Alternatively, you can create an Infocube which shares common ground between the 2 planning areas and extract data from CIP plng area into the infocube and then copy teh data from infocube to MPS plng area using the the transaction /sapapo/tscube.
Hope this helps.
Thanks
Mani Suresh

Copying One Plan Version to Another Plan Version

Hi Experts,
When I am copying one plan version to target plan version by using the transaction RE_RHCOPL00,
I am getting waring as the target version is not empty.
I have checked the tables HRP1000,HRP1001 but no objects exists for the target planversion.
Secondly I am getting waring also Number Assignment is not for all plan versions.
My requirement is to copy 3 different plan version into one plan version.
Thanks in Advance.
Regards,
IFF

Archana,
Thanx for the prompt the response.
My concern is the I have three different plan versions ( division wise) , I need to copy all the 3 plan version into one tranget plan version ( which is not active).
But in Quality and Development system we have table T77S0 with the entry 05 for the Numrg and Comp.
Should I assign the same in prodution.
I am sure that 3 different plan versions have unique numbers.Please advice what to do.
Regards,
IFF

Transferring data from one planning area to other within the same system

Hi,
We have two planning areas setup and the corresponding planning books in the same system. Now I have to save the results of first book and transfer the results in the other. They have common key figures. Is the data saved to the key figure after saving show up immediately in the second one or do I need to load?
Thanks.

Visu,
If I understand your requirement correctly, you should be able to use transaction /SAPAPO/TSCOPY (Copy/Version Mgmt) to send the data from the one planning area to the other. Please let me know if I misunderstood the requirement.
Sean

No Drill Down for a keyfigure in the Planning Book

Hi experts
We have 5 key figures in planning book.One among five key figures is Supply information , the data will be in the level of Material and Plant level.
We have 5 Characteristics such as product, Prod Grp, Plant, Region and Customer.
I want to restrict the Supply Information Key figure not to drill down when user drill downs at Customer and Region Level.
How to achieve the above functionality using Macro?
Thanks
Vicky

Hi Sunitha
Sorry for being late reply.
As per your suggestion i created macro and it was working fine when i drill down but when i select keyfigure selection(magnifying glass) and filter some keyfigures in Interactive demand planning system is not showing blank screen without any keyfigures.
When i remove this macro from Level Change, then i can able to use Keyfigure selection.
What is this inconsistency?
My GUI is 720 and Patch 4.
any suggestion?
regards
vicky

Is there a way to completly copy one hd onto the other?

I have a hd that I want to backup immediatly because it is giving me all the signs that it might die soon.. is there an easy way to copy one of them onto the other? since just clicking on one and draging the stuff into the other leaves the invisable files behind. when i mean copy I mean clone them. please help before my dieing HD croaks. thanks
powermac dual 2.7 G5, imac G4 800mhz, emac 1ghz, dual 2ghz powermac Mac OS X (10.4.3)

If you are using OS X 10.3.8 or later (including 10.4.x), you can use the OS's built in disk tool Disk Utility to create a copy or clone of your hard drive.
Launch Disk Utility, located in /Applications/Utilitities/. In Disk Utilities select your original drive. Click the tab labeled Restore, then drag your original hard drive from the left hand list, to the field labeled Source. Drag the hard drive you want to use as a copy to the field labeled Destination. Click the Restore button, and Disk Utility will copy everything from the Source drive to the Destination drive, and will also make the destination drive bootable, assuming the source included a system and was bootable.
Thats it, no separate software needed.
Tom N.

Multiple attachment of planning books to planning area

Dear all,
I am facing an issue:
When I copied the planning book in a planning area without making any changes I was not able to display the original book,
In display I found that planning area of original planning book was changed and the copied book had the requried planning area.
Please advise..
Regards,
Amol Chavan

Hi Amol,
Not sure if I understand your question correctly. But I guess you have got a planning area assigned in your planning book which you need to change. Goto Define Planning Book (transaction /SAPAPO/SDP8B) enter the planning book for which change is required. Then click on Edit (in the menu bar) >> Assign Planning Area. This will list the planning areas in the system and you can change the planning area suitably. Please note after this you need to go and check for the characteristics and keyfigures in the planning book and data view. These may be changed depending on the new planning area. Macros needs to be checked as well.
Hope this helps,
Somnath

[ZT] Important points of creating planning book

From one SAP site:
Some hints on the design and usage of macros for background processing:
u2022 Create a separate planning book for each macro background job. The planning book should
contain only key figures used by the macro itself, and only macros executed as activities by
the mass-processing job. Use a different planning book whenever different key figures are
needed by two macros, and a different data view whenever the time periods are different.
u2022 Remove all unused macros from planning books associated with mass processing jobs, as
they are loaded in an unorganized manner which can be performance-intensive. Unused
macros are not helpful to your business process.
u2022 Only those macros that are called by an activity are executed in background. These activities
are: Start, End, Level change. Default macros are not executed automatically, as they are in
dialog. When defining a job, you must therefore first establish which start and default macros
have to be executed and in which sequence, so that your own self-defined macro can work
correctly. Macros for background should not involve actions like setting colors, hiding fields,
display icons, or sending popup windows that are frequently included in default macros for
online use.
u2022 The planning book used for background macros should have only the functionality it uses, i.e.
application demand planning and no other functionality.
u2022 For performance reasons, run macros for a delta period rather than the entire horizon
wherever possible. Under most circumstances, historical data is not changed, other than
adding new periods, one time bucket profile at a time. Rather than performing the full
calculation over a long historical period, run a macro to do this once, and then design a new
macro that only performs the calculation for the u201Cdeltau201D period, or the period that has just
entered the historical horizon.
u2022 If you want to speed up the processing in the APO releases 3.0A, 3.10 and SCM 4.0, you can
create several background jobs with roughly equal numbers of characteristic combinations
and run them in parallel. Make sure that no individual characteristic combination belongs to
more than one selection variant, as this can cause lock issues. For optimum performance the
selections for parallel processing should be roughly of the same size.
u2022 From release mySAP SCM 4.1 you can use parallel processing profiles for running macros,
e.g. for the adjustment of historical data. You can navigate from transaction /SAPAPO/MC8E
directly to the maintenance of parallel processing profiles or start transaction
/SAPAPO/SDP_PAR for direct access. After defining block size and number of maximum
parallel processes you have to assign the parallel processing profile to the selection variant.
The next time you run this selection as background job it will automatically run with parallel
processing.
u2022 If you need to run two macros on the same key figures with the same level of aggregation, put
both into one planning book and execute them as two actions within the same background
activity (defined with transaction /SAPAPO/MC8T, see below). You thus save the time needed
for loading the data for a second time.

This explanation sounds very good. I think this is a very first things that we face while implementing.
Thanks for posting this.
My

View db alerts generated in planning book A from within planning book B?

Hi,
I have a db alert macro implemented as a default macro in one of our SNP planning books/data view. This is correctly generating db alerts per the criteria coded into the macro. In Alert Monitor, the database alerts show the planning book (book A) and data view (view 1) from which the alerts were generated.
The planners monitoring this specific alert do not have/should not have access to planning book A and data view 1, but will have access to a different planning book (B)/data view (2) within the same planning area.
Is it possible to generate a db alert from a default macro residing in planning book A, data view 1 but have the db alert as viewed in Alert Monitor display a different planning book (B), data view (2) so that when the user launches Supply Network Planning by right clicking on the db alert, the user is taken to planning book B, data view 2 with the alert selection loaded?
In short, I need to generate db alerts via a default macro in one planning book/data view but must enable planners who monitor these alerts to do so in a different planning book, data view -- all within the same planning area.
I saw an earlier thread (id 4517019) that seemed to indicate this was possible to assign db alerts generated in one planning book to another planning book, but it was not clear how to implement this. We are on APO version 4.0. In the macro's Alert/status element properties I do see a section called 'Different Source' which allows me to specify a different planning book and macro. However, I do not understand how this is meant to be used and whether this will be useful to me.
I would appreciate any help you can offer.
Thanks!
- Heidi

Saradha,
Thank you for your reply! I checked the various versions of SAP help and found that only as of Release SCM 4.1 can you assign the alerts that are generated in a planning book/ data view to another planning book/data view via the mechanism you explained. That tells me that perhaps in SCM 4.0 there is no straightforward way of doing this.
In 4.0, when I double click the macro alert element I see different attributes - one of them is in a section titled 'Different Source' and contains to fields - one that allows you to specify a planning book and the other to specify a macro in that planning book. I'm experimenting with that now to better understand what it's purpose is. If you have any idea, please let me know. Otherwise, thanks very much for your response!
Thanks,
- Heidi

Restricting DP Planning Books by Users

Hi All:
I have a situation where we have two business' and each of them have their own planning area and their respective planning book. One business does not want to see the other business' planning book. We have two sets of users who should be able to see one planning book each. How can I do that? I am not a security person. OUr team setup something and now when I log into the test user ID I try to execute /SAPAPO/SDP94, it gives me an error " Planning Book is defect. You dont have authorization for other books". The SU53 gives me:
> Authorization check failed
> Authorization Obj C_APO_PB
    > Auth Field ACTVT                                         03
    > Auth Field APO_DVIEW Data View             Z_DQ_ALL_TEST
    > Auth field APO_PLBK2 Planning Book          Z_DQ_ALL_TEST
> User's Auth data Q:ZFXDPMGR
> C_APO_PB etc etc   >>>>>> all green.
The Z_DQ_ALL_TEST is not the planning book that this user should access. And the User Auth data after the Auth FAilure are all green and has the correct data.
Where is the Z_DQ_ALL_TEST coming from? Any help would be greatly appreciated.
Thanks
Ryan

Hello Ryan,
Please check the transaction /sapapo/sdpplbk.
If there's default planning boo/data view assigned to the userID, please remove it.
I suppose the incorrect planning book/data view comes from here.
Best Regards,
Ada

How can I copy an iPhoto book from one Mac to another?

I'm wanting to copy an iPhoto book from one MBP (OS 10.7.3) to another (10.8.3). Is there an easy way to do it?

You will have to copy the entire iPhoto Library to the other Mac as the library is a virtual entity in the library recorece in the database files.
Once it's been copied launch iPhoto with the Option key held down and select the libary in the window that appears. I
NOTE: if the new Mac has newer iPhoto version than the old Mac check to make sure it has the same theme that you used in the book. There were some changes in themes from iPhoto 8 (09) to iPhoto 9 (11). If your new iPhoto doesn't have the same theme you may want to complete the book on the old Mac.
OT

How do I copy an address book from one user account to another?

How do I copy an address book from one user account to another?

You haven't understood me. Follow these steps:
1. Log in the user where are the files you want to transfer, and open a Finder window.
2. In Finder, select Go menu (on the menu bar) > Go to Folder, and type /Users/Shared. Now you're on Shared folder, so leave that window.
3. Open a new Finder window without closing the old one, go to the folder with the files you want to transfer, and copy them to Shared folder.
4. After copying the files to Shared folder, go to  > Log Out, and log in the other user.
5. Repeat the step 2, and you will get access to the transferred files. Now, you can open them directly from this folder, or you can copy them to a folder on your user folder

Copying a page from one picture book into another

Does anyone know how to copy a page from one picture book into another. I have made 2 books and would like to make a third consisting of pages from the first 2 but seem unable to do it without starting again, or at least starting from a duplicate of one and re doing all the missing pages.

Garageclan
Welcome to the Apple user to user assistance forums
print each page you want to include in "book 3" to a PDF and use the send PDF to iPhoto option - this will give you the pages as images in iPhoto that you can them place into "book 3"
See Old Toad's tutorial #19 for more details - http://web.mac.com/toad.hall/OldToadsTutorials/No._19.html - note that it is slightly different - you are only using the beginning part
LN

What are the ways to Copy Firm Planned Order from one ASCP Plan to another?

We run two EDD Plans with very similar options, but with different plan horizons.
To have the suggestions synchronized, we need to copy the "Firm Planned Orders" from one plan to another.
We tried inserting the records in MSC_ST_SUPPLIES with Order type 5 and firm planned type 1 with appropriate plan id, but Planning ODS Load is not considering those inserted records.
We don't want to insert directly into MSC_SUPPLIES.
Any inputs is appreciated.
Thanks
Sundar

You can also call a custom DTSX package in SSIS via the datamanager.
there are at least 5 ways of transfering data in BPC between apps.
1. Through the front end (excel etc) via evdre/evsnds
2. Through Script logic using *Dest App
3. Using BPC's standard export dtsx package via DM
4. Using SSIS using BPC's custom SSIS tasks
5. Through Script logic using stored procs.
i am sure people will come up with more.
remember if you use ssis and move data into any table but the wb, you need to process the cube afterwards.

SAPGUI 7.20 terminated when copy and paste value in planning book.

Hello Experts,
I have window 7 and SAPGUI 7.20 patch level 2. Recently, I encountered an issue where my SAPGUI terminated unexpectly when I use CtrlC and CtrlV of a value from one cell to another in any planning books (DP, SNP, ect.)
A window pop-up with a message "SAP Logon for Wndows has stopped working" , "A problem caused the program to stop working correctly. Please close the program.". The only option to select is "Close the program" and after I selected it, it terminates all of my open SAP option. It happens everytime I use the CtrlC and CtrlV of a value from one cell to another.
Do you know what caused this and how I can correct the issue? Appreciate in advance for your hel

Hi,
Check out OSS notes on the support portal. This seems to be a standard bug; might be SAP has already released some notes to fix this. Otherwise, you may need to raise an OSS message.
Regds,
Ashutosh

TSCOPY:keyfigure copy one planning book to other book

Similar Messages

Maybe you are looking for