TT89 for MN - Not calculating correctly

Hi,
TT 89 for MN is not calculating correctlty  -   BSi Message status is as appended below.
2000
NO COMPANY UT EXPERIENCE RATE INFORMATION FOR THE MINNESOTA STATE UT TAX WAS FOU
ND.   THIS TAX HAS BEEN CALCULATED USING THE BASE RATE. THIS RESULT MAY OR MAY N
OT BE VALID FOR YOUR COMPANY
Currently we are at TUB 52 ( Version 9.0 ) and i have iconfigured  the TT 89 in the Tax Model. Howver TT89 is not coming correctly. ( T5UTX value is .005 ) .
With Regards,
Abhishek

Hello,
Please check T5UTI for tax type 89 unemployment note down the Employer ID. Then with the Employer ID go to the T5UTH table and check if there is an entry there. If not, can you please maintain the T5UTH table with an appropriate entry for Employer ID?
2000
NO COMPANY UT EXPERIENCE RATE INFORMATION FOR THE MINNESOTA STATE UT TAX WAS FOUND. THIS TAX HAS BEEN CALCULATED USING THE BASE RATE. THIS RESULT MAY OR MAY NOT BE VALID FOR YOUR COMPANY
Then this means that you haven't overrided the UT experience rate for MN state for your company 'xxxx' in the appropriate dataset in BSI Server.
Please maintain the Company UT exp rate for NM state in the respective datasets and then run the payroll. This will solve the issue.
Kindly maintain the BTXRATE for it at SAP side as well as BSI Side also
Kindly maintain following in your Tax factory for your dataset --> Group Overrides  >Choose your Employee Group > Maintain record for MN.
With regards,
S.Karthik

Similar Messages

  • For Loop not acting correctly...

    Hi everyone,
    I have this For Loop in JavaScript which is not working correctly and I really have no idea why it is acting like so... I don't if anyone has already encountered this issue and I'd like to know if there's a fix for this or what am I doing wrong...
    I have a normal for until the count is done like this -> for (var c = 0; c < frmResourceReq.instanceManager.count; c++){}
    If I put this loop with only a messageBox it will do it right, so if the count is 1, it will do it once, if the count is 2 it will do it twice...
    The loop with the actual code is not acting like so.. if the count is 1, it will do it once, but if the count is 2 it will do it once also...
    At 1 point it was acting weird so I decided to make the condition with  'c <= frmResourceReq.instanceManager.count'
    Now if the count is 1, it is not working because it crashes once it execute it the second time, but if I have a count of 2 or 3 it will execute the right number of times...
    Does anyone have any idea what is creating this issue, seems like I really can't figure it out.
    Thanks for your time.

    Hi,
    to avoid that the loops condition is unnecessarily calculated again for every iteration it's recommended to save the condition in a variable first.
    for (var c = 0, n = _frmResourceReq.count; c < n; c += 1) {
        //code to execute
    As the instance count of iteration frmResourceReq may change already while the loop runs it can end with unexpected results.

  • Excel not calculating correctly.

    Using OS 10.5 I am getting incorrect answers using Excel. Switching back to OS 10.4.10 corrects that problem. Since I make my living with my Mac spreadsheets I will curtail my use of OS 10.5. So far I have found no new item worth the change of Excel not working correctly. Numbers gives only about 1% of what I need so don't say to use Numbers instead. I've tried it & used a spreadsheet for a few weeks, but stopped because of how slow Numbers is plus I had to do a lot more work to get it to do a very simple job. This was a sheet set up new in Numbers, not one that started in Excel & was translated.
    I've had some minor problems with OS 10.5 that something stopped working, but it was not any of my known running programs. I'm glad that I have OS 10.5 mounted on an external FW800 drive.
    Has anyone else had trouble like I have with Excel or with another problem with some program looking like it works, but giving incorrect answers?

    Just so I can give clients better advice, can you give a specific example of a calculation that works in Tiger, but fails in Leopard?

  • Calculating Average on a Pivot table- Not calculating correct

    Hello All BI Techie's,
    I have a requirrement, which is calculating the average out of a column , this column is aggreated by sum in the rpd.
    Month Year      Associate Headcount      Involuntary Termination Count (Associates)
    2012 / 07      18878.0      55
    2012 / 08      18817.0      53
    2012 / 09      18770.0      63
    Grand Total      18770.0      17
    Now, I want calculate a column which gives the average of Associate Headcount, ( 18878+18817+18770)/3 , how I can achieve that?
    I tried, using avg(associate headcount), it not returning correct average, any insight?
    Please share your ideas.
    Thanks,
    Bala

    Thanks Srini, The tried your solution but still the problem exists.
    I have created a new column, called Avg Headcount and entered condition in the column, I am using pivot table.
    max(rsum("Workforce Profile Facts"."Associate Headcount"))/max(rsum(1))
    Actual Results
    Month Year      Associate Headcount      Involuntary Termination Count (Associates)      Avg Headcount
    2012 / 07      18878.0      55      18907.8
    2012 / 08      18817.0      53      18878.0
    Grand Total      18817.0      108      18878.0
    Expected results
    Month Year      Associate Headcount      Involuntary Termination Count (Associates)      Avg Headcount
    2012 / 07      18878.0      55      18878
    2012 / 08      18817.0      53      18817
    Grand Total      37695.0      108      37695/2 = 18847.5
    Eeven my Associate Headcount, pivots grand total was wrong, my instanceconfig.xml already setted to aggregate enabled.

  • Group Totals Not Calculating Correctly P6 7.0 SP 4.0

    Hi there,
    For no reason I can tell, my schedule has suddenly started showing Group Totals in my layout that do not add up correctly, although the activity durations are correct.
    From past experience this is usually a calendar issue. I am using a Project Calendar, and the Hours per Time Period checkbox to use assigned calendar is ticked. I am using a 11hr / Day, 7 day a week calendar. Upon looking into the Global calendars, a 38hr week calendar is clicked as a default. Could this be causing the issue? I have done some calculations and it appears that some of the totals are being calculated on a 38hr week, but not in every case.
    I know the Global calendar issue was a problem in V6.0 but I was under the impression that the Project Calendar would overide in v7.0. is this the case?
    Is there something else I may be missing? The only major work that has been done recently is a colleague removed all the WBS Summary activities from the schedule.
    Can anyone provide any way forward?
    With Regards,

    Hi there,
    For no reason I can tell, my schedule has suddenly started showing Group Totals in my layout that do not add up correctly, although the activity durations are correct.
    From past experience this is usually a calendar issue. I am using a Project Calendar, and the Hours per Time Period checkbox to use assigned calendar is ticked. I am using a 11hr / Day, 7 day a week calendar. Upon looking into the Global calendars, a 38hr week calendar is clicked as a default. Could this be causing the issue? I have done some calculations and it appears that some of the totals are being calculated on a 38hr week, but not in every case.
    I know the Global calendar issue was a problem in V6.0 but I was under the impression that the Project Calendar would overide in v7.0. is this the case?
    Is there something else I may be missing? The only major work that has been done recently is a colleague removed all the WBS Summary activities from the schedule.
    Can anyone provide any way forward?
    With Regards,

  • Need help for style not displaying correctly in chm

    I’m using RoboHelp HTML version 8.  RH8 is dropping a style from my stylesheet.  The style appears to be applied correctly when I view a topic (the HTML file) directly with either IE or Firefox browser, and it appears correctly when I view the topic with the “Item View” feature in RH8 (the eyeglasses icon).  However, in the compiled HTML help output from RH, the style is not correct.  The style in question is a class of style (“desc” for descriptions) for a subset of table data. The “desc” class should have the data in the cell left justified, and the cell width should be 50%.  The main parent style for table data (centered text, cell width varies) seems to be applied instead, and the child style for descriptions is not applied.  Below I've included a screen shot of a table page as it looks in Item Viewer, then the same page as it appears in the CHM, and finally the style sheet in its original state before being added to RH.
    Here are things I’ve checked for:
    ·         The project is large, with over 6300 topics and a compiled chm of 5560 KB.  RH crashes when I try to apply style sheets or master pages to multiple topics from the Topic List.  However, I created a much smaller test project with 122 topics and still get the dropped style.
    ·         The style sheets were created outside of RH, and are also used for presenting the same content over the web outside of RH.  The styles display fine in the other context through a browser.  I have not modified the style sheet in RH, but I have opened it in RH.  I’ve also tried deleting and re-copying the style sheet into the project.
    ·         There is another set of styles applying to the tables, for table rows.  There is a “tr” class for the heading and classes for rotating background colors.  These child styles appear correct with no problems.  Every row in a table belongs to a child class of row styles.  In the case of table data styles, most cells require the parent “td” style and only a subclass require the child “desc” style.  It’s the “desc” style that isn’t showing up in the chm.  Is this a clue?
    ·         Multiple style sheets per topic.  Apparently only one style sheet can be used per topic.  In my project, I have two types of topics, called schema pages and table pages, with a style sheet for each.  The same master page is used for both types.  The master page uses the tables style sheet.  Therefore, the tables topics (the ones with the dropped style) use only one style sheet, but it is specified in both the master page and the topic itself.   Is this a problem?
    ·         Reviewing the style sheet in RH.  When I inspect the style sheet through RH’s Project Manager, the table data and table row styles appear under “Other” and not under “Table.”  Is this a clue?
    The special formatting of the description cells in our table-heavy project is essential.  I’ve spend days trying to troubleshoot this problem and would appreciate any help anyone can offer.

    Hi jensei,
    Thanks for that. When I took that screenshot - bizarrely those cells all had exactly the same html. I can't easily prove that now as I have tinkered with that test page quite a lot since. I started thinking maybe I could do something "clever" with table styles to save me the joyless task of manually editing all tables in my project. In the end I gave up and decided to devote a couple of hours to going through and reformatting all tables with a font that was the same size and of a similar type face to the rest of the page. Obviously not an option in your monster project, but it worked for me.
    I've seen so many random results here that I can't get my head around what exactly is going wrong - for me the issue seems connected with style = none in a table.
    Anywhere else on the page, style = none yields text with font = Tahoma 10pt.
    But in the table cells that text sometimes rendered ok in CHM, but often it would randomly appear far larger.
    So for me the cure was to format all tables with font = arial 10pt (rendered result is similar, but somehow different enough to stop the erroneous size rendering).
    That's as far as I got - as usual with time being very precious, I've had to curb my geekiness and crack on.
    Cheers,
    Andy

  • Nested CASE Statements in my SELECT of Query not calculating correctly

    Hi - Am doing simple query to calculate statistics on students per course, the WHERE includes a parameter for Academic Year, so need If Academic Year = x then calculate age in the 1st Sept of that Year, then count number of 19Yrs&Over. Have included my successful lines for sum of other data, in my CASE the calculations are not distinguishing whether age is over or under 19 just counting all. Presume is problem with Date calculation or CASE?? Runs without error..I'm guessing I can nest a CASE?!
    Many thanks!
    SELECT ......
    various fields bought through then
    count(p.PERSON_CODE) All_Enrolments,
    sum(DECODE(ru.FES_PROGRESS_CODE,'ACT',1,0)) Active,
    sum(DECODE(ru.FES_PROGRESS_CODE,'WNS',1,0)) NonStarter,
    sum(DECODE(ru.FES_PROGRESS_CODE,'WTH',1,0)) Withdrawn,
    sum(DECODE(ru.FES_PROGRESS_CODE,'TRN',1,0)) Transfers,
    sum(DECODE(la.completion,'2',1,0)) Completed,
    sum(DECODE(la.outcome,'1',1,0)) Achieved,
    sum(DECODE(p.sex,'F','1','0')) Female,
    sum(DECODE(p.sex,'M','1','0')) Male,
    SUM(
    CASE
    WHEN uio.CALOCC_OCCURRENCE_CODE='04'
    THEN
    CASE
    WHEN ((to_date('01-08-2004','dd-mm-yyyy')-to_date(p.date_of_birth,'dd-mm-yyyy'))/365.25)<'19'
    THEN '0'
    ELSE '1'
    END
    WHEN uio.CALOCC_OCCURRENCE_CODE='05'
    THEN
    CASE
    WHEN ((to_date('01-08-2005','dd-mm-yyyy')-to_date(p.date_of_birth,'dd-mm-yyyy'))/365.25)<'19'
    THEN '0'
    ELSE '1'
    END
    WHEN uio.CALOCC_OCCURRENCE_CODE='03'
    THEN
    CASE
    WHEN ((to_date('01-08-2003','dd-mm-yyyy')-to_date(p.date_of_birth,'dd-mm-yyyy'))/365.25)<'19'
    THEN '0'
    ELSE '1'
    END
    ELSE '0'
    END ) Over19sInc19
    FROM .......

    you can use this formula to check on the age:
    TRUNC(MONTHS_BETWEEN(to_date('01-08-2004','dd-mm-yyyy'),to_date(p.date_of_birth,'dd-mm-yyyy'))/12)hope this helps.

  • Current Period" attribute for Variants not working correctly

    Hi Expert,
    Pls i need your advice on the issue screenshot below.
    When creating variants, a dynamic screen selection can be chosen for “Current Period” that will pre-populate begin and end dates. The problem is that, this attribute gives calendar month dates, not our company accounting period dates i.e. 4-4-5.
    Can this be corrected?
    I have an option to create the fiscal year variant to fix the problem but am not sure on how to go about that.
    Pls advice.
    Regards
    Femmy John.

    Hi Marssel,
    Thank you for the quick respond.
    Kindly explain to me the importance of using this field period and execute same setup?
    will this populate our company accounting period dates i.e. 4-4-5.
    I just want to get the fact right before going to the customer.
    Regards
    Femmy John

  • PLEASE HELP - Subtraction not calculating correctly

    Post Author: hollyschulz
    CA Forum: Formula
    This formula I have seems to work any other time, but this one batch I am reporting on doesn't work properly:
    (distinctcount({CHART.CHART_ID}))-(distinctcount({@nc})){@nc} = if ({CHART.SUSPEND_CODE} <> "GC") then 1
    The results for {@nc} is 0 in the report, the result for (distinctcount({CHART.CHART_ID})) is 41.  How come this result of  (distinctcount({CHART.CHART_ID}))-(distinctcount({@nc})) is 40 in the report?? (41-0 should = 41 but crystal has 41-0 = 40)
    I tried adding a +1 to the end of the formula and pulling data from a different batch, but the results were 1 too much.

    Post Author: V361
    CA Forum: Formula
    Hi, Sometimes I will break the formula on purpose, save it any way and run, then when the error pops up, it will show the values in the formula editor. (in CR XI anyway)  try this formula..
    (distinctcount({CHART.CHART_ID}))-(distinctcount({@nc})){@nc} = if ({CHART.SUSPEND_CODE} <> "GC") then 1 / 0
    This will cause the formula to fail, but hopefully you will be able to see the value of {@nc} during the calculation.  Also, try adding this to the details section and manually count.
    If that does not help, could you give some sample data.

  • JEXS not calculating correctly

    Hi Gurus,
    IN MM pricing i have defined sub total 1  and given JEXS condition to caluclate the tax on the sub total 1,but it is calulating on the whole amount,i.e value after those also considering for tax calculation.
    Why the system is not calulating fromn the step i have defined,
    In TAXINN against BASB 362 is defined
    Kindly guide where i am doing mistake.

    Just so I can give clients better advice, can you give a specific example of a calculation that works in Tiger, but fails in Leopard?

  • Interactive report filter for date not working correctly

    Hi,
    I am having an interactive report. I tried to give a filter for a column(created_on) as created on>29-oct-2009 17:17
    but i am getting the row containing created on as *29-oct-2009 17:17* in the report result. How can i correct this
    problem
    Thanks,
    TJ

    Hi,
    I think it is because seconds.
    So it is 29-oct-2009 17:17:00 and your record is e.g. 29-oct-2009 17:17:02
    br, Jari
    Edit
    You can use trunc function in your select so that it round date to minutes
    TRUNC(created_on,'MI') AS created_onBr, Jari
    Edited by: jarola on Nov 5, 2009 3:02 PM

  • SNP Planned order start and end dates are not calculated correctly

    Hello SNP Guru's
    The SNP planned orders generated after the Heuristics run, have a start and end date based on the Activity Duration (Fixed), while the resource consumption is based on the Bucket Consumption (Variable), which is correct.
    The Activity Duration (Fixed) is based on the BOM Base Quantity. So if the Activity Duration = 1 day, and if the order quantity is more than a day, the start and end dates, still shows as 1 day. So no matter what is the order quantity, the start and end dates is always = 1 day.
    Does anyone have any experience in implementing any code to change the start and end dates on SNP Planned Order?
    Seems like it should work as standard.
    Am i missing something?
    Thanks,
    Mangesh

    Dear Mangesh,
    SNP is a infinite planning tool. If you have defined fixed duration to be 1 DAY in the activity, no matter how many quantity you input for your planned order, the order will last for one day. If the resourced is overloaded, you then run capacity levelling to
    banlance the capacity. What your expected beahavior happens in PPDS planning.
    Claire

  • Why is the character style for hyperlinks not displaying correctly in design mode/viewing/output?

    I am using RH9 and generating WebHelp, and I needed to globally bump up the font size of just my hyperlinked text. I went into my Style Sheet > Character tab, changed the font size of the various character settings for hyperlinks, and clicked Apply and then OK. Normally, this would change all of my hyperlink text font sizes immediately across all of my topics. However, this time, it made no changes to any existing hyperlinked text, and it only affected new hyperlinks that I subsequently added. For the existing hyperlinks, I can only manually change the font size of the each hyperlink one at a time, but that's crazy (there's 100's in this help).
    I can successfully change other characters styles and paragraph styles. This issue only affects the hyperlink character styles. It also shows up in all RH modes - Design mode, viewing, and in the final output.
    Is this an indication of a corrupted style sheet or some other combination of events that I have yet to discover?

    Hi,
    You probably have inline styling in your project overwriting the font size of your style sheet. How are you changing the font size of the individual hyperlinks?
    There is a workaround for inline styling: Open your CSS in notepad and add !important after the font-size:
    font-size: 4pt !important;
    Note that this is a workaround, not a solution. As a solutions you can remove all the style attributes from your hyperlinks to force them to take the CSS styling again.
    Greet,
    Willam

  • Quick look for pdf not working correctly in mountain lion

    I'm running 10.8.2 and have this problem on several Macs. Many of my pdf files are not viewable with quick look. Only a large blank space is shown for the page when I hit the space bar once. If I hit the space bar to close the blank view and then hit the space bar again, the image of the PDF pops up as it should. Is this a known bug?
    Mark

    I'm running 10.8.2 and have this problem on several Macs. Many of my pdf files are not viewable with quick look. Only a large blank space is shown for the page when I hit the space bar once. If I hit the space bar to close the blank view and then hit the space bar again, the image of the PDF pops up as it should. Is this a known bug?
    Mark

  • Exchange Rate amount is not calculating correctly in iProcurement

    Hi All,
    The exchange rate is mismatching when i create a requisition in the iProcurement (11.5.10.2 version).Please find the below test case and suggest me accrodingly.
    Example: on 06-May-09 and 07-May-09 i have create a requisition in the iProcurement with the currency as BHD (Note: Our functional currency is USD). The exchange rate is defined from USD to BHD is .377 and this rate is fixed for the entire month.
    The requisition created in the following manner:
    Requisition created in 06-May-09:
    =======================
    Line #1 120 BHD---the exchange rate amount in USD is 318.22
    Line#2 20BHD---the exchange rate amount in USD is 53.04
    =========
    Total : 371.25
    Requisition Created in 07-May-09:
    ====================
    Line #1 120 BHD---the exchange rate amount in USD is 318.30
    Line #2 20BHD---the exchange rate amount in USD is 53.05
    ============
    Total: 371.35
    Form the above test cases can any one help me why the requisition amount is slightly chagned from 371.25 to 371.35 even though we are using the same conversion rate (.377)..plz help ASAP , this is an very urgent for ME.
    Regards,
    Kevin.
    Edited by: kevin329 on May 7, 2009 4:53 AM

    hi
    check whether you have maintained the exchange rate settings also check whether price is maintained

Maybe you are looking for